PUMP. Type EVM APPLICATIONS MATERIALS TECHNICAL DATA. Washing system Water treatment plants Reverse Osmosis system Some chemical applications
|
|
|
- Jade Andrews
- 5 years ago
- Views:
Transcription
1 PUMP Type APPLICATIONS Washing system Water treatment plants Reverse Osmosis system Some chemical applications Conditioning systems Heating systems Industrial boilers Pressure boosting for industrial systems MATERIALS Pump body, external casing, casing cover impellers, diffusers, bearing sleeve, coupling guard and bolts in contact with liquid AISI (), AISI 316 (L), G version : bottom casing in cast iron Tierods and bolts not in contact with liquid in zinc coated steel Shaft in AISI 316 Bearing in contact with liquids in tungstencarbide Bracket and base in cast iron Mechanical seal in SiC/Carbon/FPM (35101) Cartridge mechanical seal standard (356) TECHNICAL DATA Asynchronous poles motor Insulation : Class F Protection : IP55 1~V ± 10% Hz (up to. kw) 3~/00V ± 10% Hz delta connection (up to kw included) 3~00/6V ± 10% above kw
2 Vertical MultiStage Stainless Steel Pump PERFORMANCE CHART Bar 5 Bar Bar Hz To t al H ead (m ) Capacity (m 3 /min) MODEL CODE SPECIFICATIONS ( ) 5 0 N 5 (E) E: for inverted drive only Model Series M: for Single Phase only (G): Cast iron Bottom Casing Power output in kw (L): 316 SS ( ): SS (option) Hz Nominal Capacity (m 3 /hr) N: Oval Flanges F: Round Flanges Maximum working pressure: 16 bar 5 bar bar (only for 35) Liquid temperature: from C up to +1 C from C up to +5 C (for W) No. of Impeller No. of reduced impellers (only for 3/5/6)
3 Vertical MultiStage Stainless Steel Pump STANDARD SPECIFICATION (G) Model Type Application Temperature Flow / head Max. working pressure Sealing 3 5 Water supply, Light industrial (boiler feed, washing, coolant, etc.) to +1 C 0 m 3 /hr (max): 0m (max) /MPa (16Bar/5Bar) bar: Mechanicalseal according to DIN //Mpa (16/5/Bar) Cartridge type Mechanicalseal 5 bar: Cartridge Mechanicalseal according to DIN according to DIN Connecting flange OVAL or DIN TYPE Material Impeller EN (AISI ) Intermediate casing EN (AISI ) Bottom casing EN (AISI ) Cast iron (G) Casing cover Cast iron Outer casing EN (AISI ) Shaft EN 1.01 (AISI 316) Liner ring EPDM/EN (AISI ) Motor bracket Cast iron Mechanical seal Silicon Carbide/Carbon/FPM Oring EPDM Motor No. of Poles P (00rpm:Hz Synchronous speed) Phase Three phase Voltage/Hz V/:Hz (or 00V:Hz) Flange mount IM B1 (up to kw) (IEC motor) IM B5 (above kw) Optional Specifications Material of Construction All wetted parts in SUS available upon request. DIN TYPE 6 STANDARD SPECIFICATION (L) Model Type Application Temperature range Flow / head Max. working pressure Sealing Water supply, R.O., D.I. Water, ultrafilter systems, process water, etc. to +1 C 0 m 3 /hr (max): 0m (max) /MPa (16Bar/5Bar) Cartridge Mechanicalseal according to DIN Connecting flange OVAL or DIN TYPE Material Impeller EN 1.01 (AISI 316) Intermediate casing EN 1.01 (AISI 316) Bottom casing EN 1.01 (AISI 316) Casing cover EN 1.01 (AISI 316) Outer casing EN 1.01 (AISI 316) Shaft EN 1.01 (AISI 316) Liner ring PTFE/EN 1.01 (AISI 316) Motor bracket Cast iron/en 1.01 (AISI 316) Mechanical seal Silicon Carbide/Carbon/FPM Oring EPDM Motor No. of Poles P (00rpm:Hz Synchronous speed) Phase Three phase Voltage/Hz V/:Hz (or 00V:Hz) Flange mount IM B1 (up to kw) (IEC motor) IM B5 (above kw) Optional Specifications Connecting flange Vitaulic coupling only for AISI 316 PUMP DIN round flange for 16 bar range //Mpa (16/5/Bar) DIN TYPE 6
4 Vertical MultiStage Stainless Steel Pump EBARA Corporation was established in 191 as a pump manufacturer and today EBARA is the world s foremost manufacturer of pump and pump system. EBARA is proudly presenting Vertical Multistage pump type, manufactured with great experience of EBARA in design and production of stamped stainless steel pumps, EBARA pumps offer technically advance designs to meet most market demands, including pumping of aggressive liquids. Two standard pump options are available to satisfy most of the market requirements: (G) : Bottom casing in cast iron, other liquid contact parts in SS stainless steel for general water supply usage. (L) : All wetted contact upon parts in SS316 stainless steel for aggressive liquid pumping operation. Optional materials available upon request: All wetted contact parts in SS stainless steel for industrial pumping applications. 1. Quality motor used. Standard IEC electrical motor used for pump; thus ensuring easy replacement as standard motor is easily available in the market.. Spacer coupling for userfriendly servicing. For kw & above models, uniquely designed split type spacer coupling are used to permit easy assembly/disassembly works without dismantling pipe work and motor. STANDARD IEC MOTOR WITH ALL BEARING. Wide selection options. Two () pump types are available as standard i.e. G (Cast iron bottom casing; other wetted parts in SUS) and L (All wetted parts in SUS316L). All wetted parts in SUS available as option. (G) Version FC/SUS Option: Version SUS (L) Version SUS High efficiency hydraulic design EBARA owned R&D has resulted in the newly developed hydraulic parts for, particularly impellers and intermediate casing that provides high efficiency operation. D S/S impeller 3D S/S impeller Guide vane intermediate casing BALL BEARING Heavy duty bearing set mounted on pump motor bracket, thus eliminating use of nonstandard motors to ensure reliable pump operation. 6. Bottom casing support. For 5 and 6, unique bottom casing bearing is used to enhance longer operating life of the pumps. 3. Cartridge mechanical seal. Cartridge mechanical seal is used for all pump models, except 31 (16Bar). Thus permiting easy maintenance works at site. Tungsten carbide Bottom Bearing.
5 Vertical MultiStage Stainless Steel Pump Pump Type 3 N5/0. 3 3N5/0. 3 N5/ N5/ N5/0. 3 7N5/0. 3 9N5/ 3 N5/ 3 13N5/ 3 N5/ 3 1F5/. 3 F5/. 3 6F5/ 5 N5/0. 5 3N5/ N5/0. 5 5N5/ 5 6N5/ 5 7N5/ 5 N5/ 5 10N5/. 5 N5/. 5 1N5/. 5 1N5/ 5 16N5/ 5 1F5/ F5/.0 5 F5/.0 5 F5/ 10 N5/ N5/ 10 N5/ 10 5N5/. 10 6N5/. 10 N5/ 10 10N5/.0 10 N5/ N5/ 10 1N5/ 10 F5/ 10 16F5/ 10 1F5/ 10 F5/ 10 F5/ 1 F5/. 1 3F5/ 1 F5/.0 1 5F5/ 1 6F5/ 1 7F5/ 1 F5/ 1 10F5/ 1 1F5/ 1 1F5/ 1 F5/ 1 16F5/ Pmax. [MPa] Motor [kw] H H H F E B C Dimension [mm] BM BL BY1 BW SA Ø5 Ø5 Ø5 G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ Ø3 Ø3 Ø3 Ø3 G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ Ø0 Ø0 Ø0 Ø0 Ø0 Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø SG Ø66 Ø66 Ø66 Ø Ø Ø Ø Ø Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 D1 Ø5 Ø5 Ø5 Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø D H Ø1 16 Ø1 16 Ø1 16 Ø Ø Ø Ø Ø1 Ø1 Ø1 Ø1 Ø1 Ø165 Ø165 Ø165 Ø165 Ø165 Ø165 Ø165 Ø165 Ø165 Ø165 Ø165 Ø165 SN D3 BF BH A M10 Ø1 Ø M10 Ø1 Ø M10 Ø1 Ø M10 Ø1 Ø M10 Ø1 Ø1 M10 Ø1 Ø1 M10 Ø1 Ø1 M10 Ø1 Ø1 M10 Ø1 Ø M10 Ø1 Ø Ø1 Ø1 Ø Ø1 Ø1 Ø Ø1 Ø1 Ø M10 Ø1 Ø M10 Ø1 Ø M10 Ø1 Ø1 M10 Ø1 Ø1 M10 Ø1 Ø1 M10 Ø1 Ø M10 Ø1 Ø M10 Ø1 Ø M10 Ø1 Ø M10 Ø1 Ø M10 Ø1 Ø M10 Ø1 Ø Ø1 Ø1 Ø Ø1 Ø1 Ø Ø1 Ø1 Ø Ø1 Ø1 Ø0 M1 Ø1 Ø1 M1 Ø1 Ø1 M1 Ø1 Ø M1 Ø1 Ø M1 Ø1 Ø M1 Ø1 Ø M1 Ø1 Ø M1 Ø1 Ø M1 Ø1 Ø0 M1 Ø1 Ø0 Ø1 Ø1 Ø0 Ø1 Ø1 Ø0 Ø1 Ø1 Ø0 Ø1 Ø1 Ø0 Ø1 Ø1 Ø3 Ø1 Ø1 Ø Ø1 Ø1 Ø Ø1 Ø1 Ø Ø1 Ø1 Ø0 Ø1 Ø1 Ø0 Ø1 Ø1 Ø0 Ø1 Ø1 Ø0 Ø1 Ø1 Ø3 Ø1 Ø1 Ø3 Ø1 Ø1 Ø3 Ø1 Ø1 Ø3 Ø1 Ø1 Ø3 Weight [kg] Pump Pump + Motor
6 Vertical MultiStage Stainless Steel Pump Pump Type Pmax. [MPa] Motor [kw] H H H3 3~ E B 3~ C 3~ Dimension [mm] BM BL BY1 BW SA SG D1 D H SN D3 BF BH A Weight [kg] Pump Pump + Motor F5/. 3 F5/ 3 F5/ F5/ 3 F5/ 3 3F5/ 3 0F5/ 3 53F5/ 3 F5/ 3 63F5/ 3 60F5/ 3 73F5/ 3 70F5/ 3 3F5/ 3 0F5/ 3 93F5/ 3 F5/ 3 103F5/ 3 F5/ 3 3F5/ 3 0F5/ 3 13F5/ 3 1F5/ 3 133F5/ 3 1F5/ 3 13F5/ 3 F5/ 5 F5/ 5 10F5/.0 5 F5/ 5 F5/ 5 3F5/ 5 F5/ 5 F5/ 5 0F5/ 5 5F5/ 5 F5/ 5 6F5/ 5 60F5/ 5 7F5/ 5 70F5/ 5 F5/ 5 0F5/ 5 9F5/ 5 F5/ 5 10F5/ 5 F5/ 6 F5/ F5/ 6 F5/ 6 1F5/ 6 F5/ 6 33F5/ 6 3F5/ 6 31F5/ 6 F5/ 6 3F5/ 6 F5/ 6 1F5/ 6 0F5/ 6 53F5/ 6 5F5/ 6 51F5/ 6 F5/ 6 63F5/ 6 6F5/ 6 61F5/ 6 60F5/ 6 73F5/ 6 7F5/ 6 71F5/ Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø35 Ø35 Ø35 Ø35 Ø35 Ø Ø1 Ø1 35 Ø1 Ø1 35 Ø1 Ø1 35 Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø1 5 Ø1 Ø1 5 Ø1 Ø1 5 0 Ø1 Ø1 5 0 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø1 5 Ø1 Ø1 5 0 Ø1 Ø1 5 0 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø1 Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø * Dimensional details are provided for reference only. * All specifications are subject to change without prior notice. Note : 1~ : Single phase motor 3~ : Three phase motor EBARA Pumps Malaysia Sdn Bhd 6, Jalan TP3, UEP Subang Jaya Industrial Park, 76 Subang Jaya, Selangor, Malaysia. Tel : Fax : sales@ebara.com.my Website : Authorised dealer: EPM
Data sheet: Wilo-CronoNorm-NL 80/200-3/4
Data sheet: Wilo-CronoNorm-NL /-3/ Pump curves H/m 1 1 1 1 NPSH/m,5, 1,5 1,,5 P /kw 5 3 1 3 5 55% % 5% 7% 7% 7,9% 1 5 15 5 3 35 3 5 1 3 5 7% 7,3% 7% 7% 77,9% 7,% 7,% Ø 17 Eff. 7,9% Ø 1 Ø 19 7% Ø 19 Ø 1
E Series Back Pull Out End Scution. Centrifugal Pump DIN 24255
Back Pull Out End Scution Centrifugal Pump DIN 24255 MARKET SECTORS Buidling Services, RHVAC, Agriculture, Civil, Industries Back Pull Out End Suction Centrifugal Pump DIN 24255 MATERIAL OF CONSTRUCTION
Standard pumps. Dimensions, weights Wilo-CronoLine-IL
Standard pumps Dimensions, weights Wilo-CronoLine-IL Standard pumps Dimensions, weights Wilo-CronoLine-IL Subject to change without prior notice /7 WILO AG / WILO AG Special features/product advantages
NM, NMS. Close Coupled Centrifugal Pumps with flanged connections. Construction. Applications. Operating conditions. Motor
lose oupled entrifugal Pumps The electropumps,, S, S series comply with the Regulation no. 7/ in force starting from.. European Materials omponents, S, S Pump casing ast iron ronze Lantern bracket asing
NK End-suction centrifugal pumps
Being responsible is our founation Think ahea makes it possible Innovate is the essence HARD-WORKING AND RELIABLE MEETING YOUR NEEDS IS OUR JOB NK En-suction centrifugal pumps PT. GRUNDFOS POMPA Jl. Rawa
NESD / NESE. SINGLE-STAGE SELF-COOLED CENTRIFUGAL PUMPS TO STANDARD EN (NPE 44121) High-temperature water OPERATING LIMITS APPLICATIONS
OERATING LIMITS Flow up to: Head up to: 9 m CE Service pressure up to: up to bar* Temperature: min: C* / max: C* *: depending on model NESD / NESE SINGLE-STAGE SELF-COOLED CENTRIFUGAL UMS TO STANDARD EN
DAS Series Submersible Waste Water and Sewage Pumps
art DAS Series Submersible Waste Water and Sewage s ALICATIONS: ing of domestic and industrial sewage At sewage treatment plants ing of chemical and industrial waste water. ing of rain water All kinds
CR64. CR Series. Parts List & Kits. Parts List & Kits CR64. GRUNDFOS Commercial Industrial Service Manual
& Kits CR64 Being responsible is our foundation Thinking ahead makes it possible Innovation is the essence & Kits CR64 GRUNDFOS Commercial Industrial Service Manual CR64 & Kits Contents Spare Part Kits
Novax. Axial flow fans Standard and hot smoke
Novax Axial flow fans Standard and hot smoke Product facts Product Axial flow fans with adjustable blades. ACN for duct installation ACW for heavy duty ACG free intake with connection to duct ACP free
NM, NMD: Close Coupled Centrifugal Pumps with threaded ports
, D Construction Close-coupled, centrifugal pups; electric otor with extended shaft directly connected to the pup. : single-ipeller D: with two back-to-back ipellers (with axial thrust balancing). Connections:
GEAR PUMPS. Displacement from 10 to 100 ccm Pressure up to 290 bar Speed from 350 to 3200 RPM
Displacement from 10 to 100 ccm Pressure up to 290 bar Speed from 350 to 3200 PM GEA PUMPS Q2 Gear Pump Catalogue Q2 TABE OF CONTENTS DESCIPTION......................................................................................................................
Klinger Manometer Serie 200
Klinger Manometer Serie 200 All stainless steel Bourdon tube pressure gauges watertight casing, dry or liquid filled execution; NS 63-100 150 200-250; Ranges included between -1 and 1.600 bar. The instruments
from 500 to 5000 RPM GEAR PUMPS P23
Displacement Pressure Speed from 0,80 to 11,80 ccm up to 310 bar from 500 to 5000 PM GEA PUMPS P23 Table of Contents P23 TABE OF CONTENTS DESCIPTION... 2 BASIC PATS... 2 PAAMET TABE... 3 FOMUAS USED FO
Novenco Axial Flow Fans. Novax St andard and hot Smoke
Novenco Axial Flow Fans Novax St andard and hot Smoke Product facts Product Axial flow fans with adjustable blades. ACN for duct installation ACG free intake with connection to duct ACP free suction and
Our most important values are, environmental consciousness, high quality of the products, top-notch energy-efficiency and low life-cycle cost.
PUMP CATALOGUE Kolmeks Ltd is a Finnish pump and electric motor manufacturer and part of the privately owned Brandt Group. It is one of the most successful companies in the pump business in Finland, operating
ROUNDO Section Bending Machines Type R-1 through R-21-S
ROUNDO Section Bending Machines Type R-1 through R-21-S Friläggas 1 Roundo Section Bending Machines - Largest selection on the market ROUNDO is the worlds leading manufacturer of plate and section bending
CITY OF WHITE HOUSE REQUEST FOR BID FOR PORTLAND ROAD LIFT STATION DRY PIT SUBMERSIBLE PUMP. August 22, 2017
CITY OF WHITE HOUSE REQUEST FOR BID FOR PORTLAND ROAD LIFT STATION DRY PIT SUBMERSIBLE PUMP August 22, 2017 105 College Street White House, Tennessee, 37188 Page 1 of 9 CITY OF WHITE HOUSE REQUEST FOR
Other variations which are not mentioned in this document are on demand (if possible).
GENERAL INFORMATION This specification document is for gas-filled thermometers manufactured by: STIKO, Industrieweg 5, 9301 LM Roden, The Netherlands. STIKO is a manufacturer of mechanical instruments
Full Automatic Mounting Press
Full Automatic Mounting Press B/B-E3 One button start Perfect mounting Intuitive operation http://www.toptech.tw Instruction Operation video Top cover Quick release Indicator light LED display Mounting
Max. flow absorbed (l/mn) Torque (N.m/bar) R
M series motors Characteristics of the m series motors Motor model Displacement (cc/rev) Continuous max. speed (1) (rpm) Intermittent max. speed (1) (rpm) Max. flow absorbed (l/mn) Torque (N.m/bar) Torque
NM, NMS. Close Coupled Centrifugal Pumps with flanged connections
lose oupled entrifugal Pups Materials oponents, S, S Pup casing ast iron ronze Lantern bracket asing cover for S GJL N Gu Sn N Lantern bracket S ast iron GJL N Ipeller ast iron ronze GJL N Gu Sn N rass
Full Automatic Mounting Press
Full Automatic Mounting Press L1/L1-E3/L2/L2-E3 Dual cylinder High efficiency User-friendly Touch panel http://www.toptech.tw 0 Instruction Model type: L1 Operation video Top cover Quick release Thermostat
MIG/MAG. Catalogue 2004/2005. W elding & cutting brought to the point.
MIG/MAG Catalogue 2004/2005 W elding & cutting brought to the point. Content MIG/MAG Welding Torches MIG/MAG Welding Torches MB air-cooled (up to 230 A) Page 4 5 MB 15 AK / 15 AK-FX / 25 AK / 25 AK-FX
SUBMERSIBLE PUMPS FOR WASTE WATER VORTEX IMPELLER
G BEBE WE WE EX EE ade in high quality engineering cast iron. ortex ipeller. he subersible pups are supplied coplete with threaded counterflanges, packings and stainless steel bolts. pplications - ewage
CAPILLARY DIAL THERMOMETERS TYPE TXC
CAPILLARY DIAL THERMOMETERS TYPE TXC TYPE DRAWING DIMENSIONS mm A TXCxxxXA B 38 37 45 45 55 C 13 13 13 13 13 B B 41 40 51 51 57 C 13 13 13 13 13 TXCxxxXB D 86 110 132 196 285 D B 33 29 31 32 45 C 13 13
MAAG TM PPU gear unit for roller presses, horizontal mills and kilns
MAAG TM PPU gear unit for roller presses, horizontal mills and kilns 2 Our quality policy FLSmidth MAAG Gear is committed to creating long lasting relationships that establish us as a trustworthy, reliable
PIPING, VALVES AND JOINTS
Piping and accessories... page 208-209 PVC Valves... page 210-213 Clamp saddle... page 213 Clapet Valve, Hose Holder Joints, Galvanised Collar... page 214 Compression connections... page 215 Pasting PVC
BID RESPONSE LABEL THIS LABEL FOR USE WITH UNITED STATES POSTAL SERVICE DELIVERY RECONDITION MUFFIN MONSTER ELECTRIC (DATE): DEC.
BID RESPONSE LABEL Proposals sent by U.S. Mail should be addressed to Director of General Services, Town of Manchester, 494 Main Street, P.O. Box 191, Manchester, CT 06045-0191. Proposals hand delivered
PPG Series High Precision Gearbox. Datasheet
PPG Series High Precision Gearbox Datasheet Version PPG-2014-01 http://www.primopal.com Description PrimoPal s PPG series High Precision Planetary Gearboxes are mainly used with kinds of servo motors and
PRODUCT SPECIFICATION October 2012 KMT 0 NG LHS / NGJ LHS KMT 0 NGJ LHS ULC
Ref. / PS-KMT-281 Page 1 of 8 Approvals: Laurent Kubat Date Engineering Manager Revision record: Revision Date Comments - March 22 nd 2010 Creation rev. A May 28 th, 2010 Update : (According to ECR N 5437)
MIG/MAG Welding Torch MB 401 D / MB 501 D. liquid cooled. BINZEL. The right welding torch for every job! For welding and cutting come to the point.
MIG/MAG Welding Torch MB 401 D / MB 501 D liquid cooled C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M BINZEL. The right welding torch for every job! BINZEL liquid cooled welding torches incorporate
MIG/MAG Welding Torch MB 401 D / MB 501 D. liquid-cooled. ABICOR BINZEL. The right welding torch for every job!
MIG/MAG Welding Torch MB 401 D / MB 501 D liquid-cooled C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M ABICOR BINZEL. The right welding torch for every job! BINZEL liquid cooled welding torches incorporate
PHASED OUT. LED light engine / OLED LED linear / area. Module CLE Shallow G1 ADV Modules CLE
Product description For round and and ultra flat, wall-mounted, ceiling-mounted and suspended luminaries Backlighting depth of 3 mm can be realized Wide beam chip enables high homogeneity despite low backlighting
MIG/MAG. Catalogue 2006/2007. T echnology for the Welder s World.
MIG/MAG Catalogue 2006/2007 T echnology for the Welder s World. Content MIG/MAG-Welding Torches MIG/MAG Welding Torches MB GRIP air-cooled (up to 230 A) Page 4 5 MB GRIP 15 AK / 25 AK MIG/MAG Welding
Concentric butterfly valves, wafer, lugged and flanged
Concentric butterfly valves, wafer, lugged and flanged Table of contents Introduction Technimex is an international supplier of products needed for urban infrastructure such as water-, sewage-, and gas
UTS. UTS : Your first choice in waterproof connectors! Description. IP68/IP69K - Plastic connector
Description IP68/IP69K - Plastic connector UTS series is a range of industrial plastic circular connectors offering IP68/IP69K water protection. 4 shell s - up to 32 contact positions - are available with
Faymonville Mega- Z- 4H- V- AT- A (2.74) Details. Mega-Z-4H-V-AT-A (2.74)
Faymonville Mega- Z- 4H- V- AT- A45-7.50(2.74)- 19.5-2.74 Details ID. Number FA.2759 Manufacturer Faymonville Type Mega-Z-4H-V-AT-A45-7.50(2.74)-19.5-2.74 Price On request Year New Axles 4 Speed Speed
HIGH PRESSURE + STAINLESS STEEL. Rotary Union Solutions HPS. Series FLOW PASSAGE OPTIONS
RESSURE + SAESS SEE Rotary Union Solutions S Series FW ASSAE S 1 3 4 6 8 12 16 Rotary Union Solutions S Contents About DS 3 What is a Rotary Union? 4 S Series verview 5 ow o rder 6 Specifi cations & perating
38 Lucerna - LED 01E LED_AU_Lucerna.indd 38 27/12/16 10:39
38 Lucerna - LED Lucerna - LED Technical Specifications: Housing, lid, spokes, and connection for die-cast aluminium pressed poles. Diffuser: Tempered glass, 5 mm thick, withstands thermal shock and impacts.
M40 Size 1.5/Size 1.5i Power Connectors
M40 Size 1.5/Size 1.5i Power Connectors Approvals Tested acc. to DIN EN 61984 UL/CSA metallic connectors Number of ways: Contact diameter: Nominal current (VDE) / 20 C: Nominal current (UL): Nominal current
SLANT BED CNC TURNING CENTER
1 SLANT BED CNC TURNING CENTER DESCRIPTION FTC-300 FTC-350 FTC-350L FTC-350XL FTC-350LY Swing Over Bed mm Ø 550 Ø 600 Ø 600 Ø 600 Ø 600 Max. Turning Diameter mm Ø 300 Ø 350 Ø 350 Ø 350 Ø 350 Max. Turning
Conduit Entry System. At a Glance. FWS Assembly. 1. Fast and Easy Assembly. 2. Easy to Maintain. 3. Flexible
Conduit Entry System At a Glance CONFIX FWS The 90 angled conduit fitting CONFIX FWS is perfect for installation of parallel corrugated cable protection conduits, e.g. in machines, control panels or other
Taper Pins, Unhardened DIN 1 B ISO 2339
Taper Pins, Unhardened DIN B ISO 339 Ø.5 Ø Ø.5 Ø 3 Ø 4 Ø 5 Ø 6 Ø Ø 4 Ø 6 Ø 0................ x8... x30 x3 x36... 3x3 3x36 x40 x45 x50... 3x40 3x45 3x50 0x40 0x45 0x50 3x55 0 5 4x55 0 5 5x55 5x60 5x65 6x65
PAS. Heavy Duty Pressure Transmitter
Heavy Duty Pressure Transmitter measuring monitoring analyzing PAS Span: -14.7 21 PSIG up to 0 8700 PSIG t max : 248 F Process Connection: ½" NPT, ¼" NPT, or Various Diaphragm Seals on Request Material:
fiber optic through-beam and dif. reflection sensors
ipf electronic gmbh Kalver Straße 25 27 through-beam sensors diffuse reflection sensors accessories fiber optic through-beam and dif. reflection sensors plastic optic fibers 1800 1 2 1800 plastic fiber
Expansion Vessels & Separators
Expansion Vessels & Separators Winkelmann is one of the global leading original equipment manufacturers (OEM) for water storage tanks, expansion vessels, separators and manifolds. As part of the Winkelmann
Sensyflow P. Thermal air-mass flowmeter for test rigs and quality assurance 10/ EN. Function and System Design
Sensyflow P Thermal air-mass flowmeter for test rigs and quality assurance 10/1-6.8 EN Direct mass flow measurement Wide measuring range (1:0) High measuring accuracy measuring deviation < 1 % of measured
Case studies Vertical bearing GGG40 (GJS )
Vertical bearing GGG40 (GJS-400-15) Machine: MC HSK63 Material: GGG 40 (EN-GJS-400-15) Parts/Year: ca. 100 000 Pre-machining: boring Coolant : Minimum quantity lubrication (MQL) Ø 33N5 x 142mm MQL CircoTec
SOURIAU Extends its High Density Offer with Size #26 Contact Technology
SOURIU xtends its Offer with Size #26 ontact Technology SOURIU brings to market a lightweight, robust and reliable 8ST High ensity solution from the smallest to the largest. reliable & robust solution
LED light engines LED compact. Module CLE G3 ADV Modules CLE ADVANCED
Module CLE G3 ADV Modules CLE ADVANCED Product description Ideal for ceiling-mounted and wallmounted luminaires LED system solution consisting of the LED module, the control gear with integrated emergency
DIAPHRAGM VACUUM PUMPS AND COMPRESSORS
DIAPHRAGM VACUUM PUMPS AND COMPRESSORS DATA SHEET N 816 N 816 KNE (w/ AC motor) N 816 KN.29DC-B-M (w/ standard-life BLDC motor) N 816 KN.29DC-B (w/ long-life, multi-function BLDC motor) Concept The diaphragm
Ritmo meets all your welding needs in your jobsite
Ritmo meets all your welding needs in your jobsite A RITMO DVANTAGE RITMO WORLDWIDE Ritmo has professional distributors and resellers all over the world. Our staff is ready to assist you in English, Spanish,
DIAPHRAGM VACUUM PUMPS AND COMPRESSORS
DIAPHRAGM VACUUM PUMPS AND COMPRESSORS DATA SHEET N 816 N 816 KNE N 816 KN.29DC-B-M N 816 KN.29DC-B Concept The diaphragm pumps from KNF are based on a simple principle an elastic diaphragm, fixed on its
Innovations Technical details
Innovations 0 Technical details Support arm system 60/0/80 ttachment, system 60/0 for command panels with support arm connection Ø 30 mm Innovations 0, page 38 CP 606.30 CP 6.30, enclosure Ø 30 mm 8.5
TECHNOLOGY FOR THE WELDER S WORLD. MIG/MAG Welding Torches MB EVO PRO. air & liquid cooled. Just what you need!
TECHNOLOGY FOR THE WELDER S WORLD. MIG/MAG Welding Torches MB EVO PRO air & liquid cooled Just what you need! www.binzel-abicor.com MIG/MAG Welding Torches MB EVO PRO air cooled Rating 150 A up to 230
Ritmo meets all your welding needs in your jobsite
Ritmo meets all your welding needs in your jobsite The information and photos in this publication are not binding and RITMO S.P.A. is free to make any alterations without prior notice. A RITMO DVANTAGE
Ritmo meets all your welding needs in your jobsite
Ritmo meets all your welding needs in your jobsite A RITMO DVANTAGE RITMO WORLDWIDE Ritmo has professional distributors and resellers all over the world. Our staff is ready to assist you in English, Spanish,
PRODUCT BROCHURE FLUE GAS & VENTILATION SOLUTIONS
PRODUCT BROCHURE FLUE GAS & VENTILATION SOLUTIONS PRODUCT BROCHURE FLUE GAS & VENTILATION SOLUTIONS CONTENT FLUE GAS SYSTEMS Coaxline Concentric Flue System... 5 Benefits... 7 Coaxline Standard/Plus...
Solar Isolator Range. Bright solutions
Solar Isolator Range Bright solutions The World s Finest Contents Page ON-OFF Switches for Panel Mounting 4 ON-OFF Switches for Single Hole Mounting 4 ON-OFF Switches for Base Mounting with Door Clutch
TEST REPORT IEC : 2005 (2nd Edition) and/or EN :2006 Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of TEST REPORT IEC 60950-1: 2005 (2nd Edition) and/or EN 60950-1:2006 Information technology equipment Safety Part 1: General requirements Report Reference No...:
grinding wheels 322 z Cloth z With centre hole z Combi z Convolute z Unitized z Spindle mounted
320 grinding wheels z With centre hole 322 z Cloth 322 z Tex 326 z CSD 329 z Combi 330 z Convolute 332 z Unitized 334 z Spindle mounted 338 z Cloth 338 z Tex 342 z Combi 345 z CSD 348 z Unitized 349 Cibo
Machine volt/hz Watt r.p.m. kg Plug R ref. ES / EU
ES EP EU STR: Single discs Machine volt/hz Watt r.p.m. kg Plug R ref. ES 330 ES 330 230/50 600 165 22 EU 611500 ES 420 ES 420 duo 230/50 1300/1600 140/280 48 EU 612400 ES 420 230/50 1200 175 40 EU 614205
TT SERIES OD ORBITAL CUTTING & BEVELING MACHINES 1/8 TO 168 OD 1/9
TT SERIES OD ORBITAL CUTTING & BEVELING MACHINES 1/8 TO 168 OD PRACTICAL TOOLS INC. P.O. Box 233 Aurora, ON L4G 3H3, Canada Phone: 905-727-0014 / 888-847-8880 Fax: 905-727-8483 info@practicaltoolsinc.com
DEVIATIONS TO IS: (FIRST REVISION) SPECIFICATION FOR RAILWAY CARRIAG E FANS
Page 1 of 7 Effective from 20.06.2003 ANNEXURE H WITH AMENDMENT NO.1 OF ANNEXURE H (Revised in December, 2002) with amendment No.1 DEVIATIONS TO IS: 6680-1992 (FIRST REVISION) SPECIFICATION FOR RAILWAY
Formal Interpretations/ Interprétation formelle
Formal Interpretations/ Interprétation formelle This section lists questions that individuals have submitted about a particular standard. Each question has been reviewed and answered by the appropriate
Classification of Parts and Accessories in the Customs Tariff. In Brief
Ottawa, May 13, 2014 Memorandum D10-0-1 Classification of Parts and Accessories in the Customs Tariff In Brief The editing revisions made in this memorandum do not affect or change any of the existing
Metal Bellows Couplings Servo-Insert Couplings Line Shafts
US 08 2009 Metal Bellows Couplings Servo-Insert Couplings Line Shafts Partner for performance www.gerwah.com A Global Presence For You The RINGFEDER POWER TRANSMISSION GMBH was founded in 1922 in Krefeld,
M-Series, Actuator Overview. Machine Screw Cutaway. UNI-LIFT Machine Screw Actuators offer precise. 12
M-, Actuator Overview UNI-LIFT Machine Screw Actuators offer precise positioning, uniform lifting speeds and capacity up to 250 tons. Standard model configurations include upright or inverted units with
Trocar Systems. Complete and efficient. Trocar systems
Trocar Systems Complete and efficient Trocar systems Quality workmanship: PAJUNK Trocar systems Requirements for a trocar system vary greatly. The type and length of the respective surgical procedure has
Pneufit C & Pneufit M metric Ø mm O/D tube
Pneufit & Pneufit M metric Ø... mm /D tube orgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range of over, composite
Catalog HY /US SERIES DESCRIPTION BODY NO. PAGE NO.
Catalog HY15-350/US Contents odies and SERIES DESCRITION ODY NO. GE NO. RKER STNDRD ODIES ND ITIES C04-... 04, Way... 04--*... 7 C04-3... 04, 3 Way... 04-3-*... 8 C08-... 08, Way... 08--*... 9 C08-3...
INDUSTRIAL SWITCHGEAR
INDUSTRIAL SWITCHGEAR VYNCO INDUSTRIES (NZ) LIMITED Head Office 388-396 Tuam Street, Phillipstown, Christchurch 8011 PO Box 9022, Tower Junction, Christchurch 8149 New Zealand P +64 3 379 9283 F +64 3
DIMENSIONS...R20 Series MOUNTING AND SHAFT OPTIONS CONNECTORS SIDE VIEW ENGLISH (INCHES) METRIC (MILLIMETERS) REAR MOUNTED MS CONNECTOR OPTION
DIMENSIONS...R20 Series SIDE VIEW AND THERMISTOR (FLYING LEADS AL) (3.11) (79) SECONDARY 2.28 MAX. 57,9 MAX. 18.0 MIN. 457,2 MIN. REF. R21 6.38 (4.93) R22 7.38 (5.93) R23 8.38 (6.93) R24 9.38 (7.93) REF.
Efficient-Tec International LLC.
Efficient-Tec International LLC. Walkway Handrail Stairway Handrail Illuminated Handrail Wire Rope Infills Rod Infills Glass Infills Spiral Staircases Glass Canopies Efficient-Tec International LLC. This
DOPPIA PARETE > INOX/RAME
Diametri disponibili/available diametres Ø 80/100 - Ø 100/130 Applicazioni / Applications Installazione esterna Outdoor installation Caldaie a condensazione Condensing devices Isolamento / Insulation Ø
Submersible Pumps. Price List 2013 SAKURAGAWA. Brown Brothers Engineers Ltd
Submersible Pumps Price List 2013 SAKURAGAWA Submersible Dewatering Pumps Sakuragawa Pumps are high capacity submersible dewatering pumps. These pumps are powerful, efficient and dependable. These pumps
PAD. Heavy Duty Differential Pressure Transmitter
Heavy Duty Differential Pressure Transmitter measuring monitoring analyzing PAD Span: 0.3" W.C. 6" W.C. to 60 6000 PSIG Static Pressure: Max. 4500 PSIG t max : 248 F Process Connection: ½" PT, ¼" PT, or
B-Series Section Overview. Ball Screw Cutaway. UNI-LIFT Ball Screw Actuators provide high. 34
B- Section Overview UNI-LIFT Actuators provide high efficiency and high speed in a linear positioning package up to 100 tons. The low friction ball screw and nut design provides longer life at load and
A C O R N 4 1 S E R I E S S T A I N L E S S S T E E L R A N G E A mm Straight Lever on concealed bearing rose A4103.
41 SERIES Tubular A4100 19mm Straight Lever A4101 A4102 16mm Straight Lever 19mm Straight Lever on concealed sprung rose Tubular A4103 16mm Safety Lever on concealed sprung rose A4104 A4105 A4106 A4107
ALUMINIUM ROLLERS MADE IN ITALY
ALUMINIUM ROLLERS MADE IN ITALY Alveolar aluminium rollers, diameter 60mm to 250mm (natural or anodized). Roller manufacturing will be completely based on customer's drawings. The rollers can be supplied
Steel Pipes. Plastic Pipes. Seamless Pipes
Steel Pipes Plastic Pipes Seamless Pipes We, Hatboru Sanayi ve Ticaret A.S., are pleased to introduce ourselves as one of the leading producer and exporter for spiral submerged arc welded steel pipes (SSAW)
COLLARS and WASHERS. HEAVY TURNED WASHERS page 4 TURNED TAPER WASHERS 5 TURNED WASHERS FOR SWIVEL HEADS 5 COLLARS IN COMPLIANCE WITH DIN 705 6
COLLARS and WASHERS HEAVY TURNED WASHERS page 4 TURNED TAPER WASHERS 5 TURNED WASHERS FOR SWIVEL HEADS 5 COLLARS IN COMPLIANCE WITH DIN 705 6 CLAMPING COLLARS FORM C-AB 7 CLAMPING COLLARS WITH OPEN RING
Base for Stable Mounting an Eco Pedestal
Eco Air Meter Stand With Inspection Door Before you buy your stand, make sure to ask the seller about the main post if he s using a 1/8 solid metal post instead of a 1/16 thin metal. Eco Top Light Full
Monobloc and Norm Pumps, Axially Split Case Pumps
Catalogue Heating, Air-conditioning Cooling and Water Supply Monobloc and Norm Pumps, Axially Split Case Pumps Pumps and Accessories Catalogue A3 - Hz - 9 A3 Programme overview and fields of applications
DÖRRIES SCHARMANN ECOSPEED HSK-A63/80 STARRAG WERKZEUGAUFNAHMEN TOOL HOLDERS HSK A63/80.
DÖRRIES SCHRMNN ECOSPEED HSK-63/80 STRRG STC TOO 800X HODERS WERKZEUGUFNHMEN TOO HODERS HSK 63/80 www.haimer.com POWER SHRINK CHUCK HSK 63/80 (TPER 63 mm/fnge 80 mm) 10 4.5 D3 CERTIFICTE OF QUITY ll functional
Stainless Steel Gas Springs
Stainless Steel Gas Springs Gas Springs in 4 (V2A) Stainless Steel As well as its very extensive range of standard adjustable force gas springs ACE can offer a wide range of stainless steel gas springs.
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
Single Pole Cam-Type Connectors
UL/CSA 1691 Compliant Single Pole Cam-Type Connectors For applications up to 400A, 600V AC or DC Color-coded insulating sleeves for easy phase identification High conductivity positive, vibration-proof
LEVELTEC ENGINEERING PTY LTD
LEVELTEC ENGINEERING PTY LTD AUSTRALIAN DISTRIBUTOR FOR PC ELECTRIC PLUGS & SOCKETS PCE INDUSTRIAL PLUGS, SOCKETS AND CONNECTORS Industrial & Event CEE 16-125A 110-500v AC Switched Interlocked or Pilot
Commercial/Industrial. Single Pole Devices. Industrial Grade Connectors for Temporary and Semi-Permanent Power Distribution Applications
Commercial/Industrial Single Pole Devices Industrial Grade Connectors for Temporary and Semi-Permanent Power Distribution Applications Single Pole Cam-Type Devices Rhino-Hide Single Pole Cam-Type Devices
teckentrup-sperrkant The Original
teckentrup-sperrkant The Original www.teckentrup.de New Serrated Locking Washer NSK Innovative Screw and Bolt Locking Technology» Reliable bolt locking at low and high preload forces» Locking function
RW-175 and RW-175-E SLEEVING
RW 3029/1 Revision 4 Page 1 of 6 Date Printed 17-Mar-14 Specification RW 3029/1 Revision 4 RW-175 and RW-175-E SLEEVING SCOPE This Quality Assurance Specification establishes the quality standard for a
Intelligent Drivesystems, Worldwide Services. G1014 NORDBLOC.1 2-stage helical-bevel gear unit SK SK SK SK
Intelligent Driveytem, Worldwide Service GB G11 NORDBLOC.1 2tage helicalbevel gear unit SK 9272.1 SK 92772.1 SK 9372.1 SK 93772.1 Content INTRODUCTION................................... A 1 3 STANDARDS,
Formal Interpretations/ Interprétation formelle
Formal Interpretations/ Interprétation formelle This section lists questions that individuals have submitted about a particular standard. Each question has been reviewed and answered by the appropriate
MATERIAL AND EQUIPMENT STANDARD FOR HOOKS, SHACKLES, EYE BOLTS AND CHAINS FIRST EDITION FEBRUARY 2005
MATERIAL AND EQUIPMENT STANDARD FOR HOOKS, SHACKLES, EYE BOLTS AND CHAINS FIRST EDITION FEBRUARY 2005 This standard specification is reviewed and updated by the relevant technical committee on Apr. 2015.
Air Grinders with Collets
Screwdriving technology Automation Air motors Air tools Air Grinders with Collets AngleHead Design Power Output: 130 W, 300 W, 700 W (.17 /.40 /.94 HP) highest power output at a low weight ergonomic highly
Elektrospindeln / 2-Achsfräsköpfe Direct Drive Electrospindles / Direct Drive 2 Axis Heads READY TO PERFORM.
Elektrospindeln / 2-Achsfräsköpfe Direct Drive Electrospindles / Direct Drive 2 Axis Heads READY TO PERFORM. DIRECT DRIVE HST1 SINGLE SIDED HST1 DOUBLE SIDED HST1 SINGLE SIDED HST1 DOUBLE SIDED 2-ACHSFRÄSKÖPFE
BORING KITS from Ø 6 mm up to 210 mm
Bohrstar BORING KITS from Ø mm up to 0 mm Coupling system COUPING SCREW ARBOR BORING HEAD COUPING SCREW HIGH RIGIDITY By tightening the two cone shaped coupling screws, high axial forces are developed
Medical technology Main catalog. Medicalline Medical industry connectors
Medical technology Main catalog Medicalline Medical industry connectors STÄUBLI ELECTRICAL CONNECTORS Long-term solutions Expert connections Stäubli Electrical Connectors is a leading international manufacturer
CABLE FIXING CLAMPS FOR HIGH VOLTAGE CABLE SYSTEMS
LE FIXING LPS FOR HIGH VOLTGE LE SYSTES P: 0 00 W: www.cablegrid.com.au ustralia Pty Ltd EELE able leats are available for trefoil and single cable applications where moderate to levels upto 0 k- sec/0k-