Efficient-Tec International LLC.

Transcription

1 Efficient-Tec International LLC. Walkway Handrail Stairway Handrail Illuminated Handrail Wire Rope Infills Rod Infills Glass Infills Spiral Staircases Glass Canopies

2 Efficient-Tec International LLC. This catalog is the sole property of Ef cient-tec International LLC. isclaimer Use of this catalog is limited to customers and authorized representatives of Ef cient-tec International LLC. Any images or descriptions in this catalog are the property of Ef cient-tec International LLC. Any attempt to change or modify catalog content is strictly prohibited. 2

3 Contents Handrail Introduction pg. 9 AA & building code compliance pg. 11 LERail Illuminated Handrail pg Walkway Guardrail and Handrail pg Stairway Handrail and Guardrail pg Infills -Wire Rope pg Rod pg Glass pg Spiral Staircases pg The Quick Connecting System pg ouble Flat Bar Posts pg Glass Canopies pg Stainless Steel Noelties pg System Components -Bottom Holders pg Wall Brackets pg Underside Mounting Brackets pg. 52 -Plates pg Tubes pg. 55 -Tube Holders pg Corner Connectors pg Tube Connectors pg Tube Couplings pg Handrail Supports pg Handrail Support Components pg Handrail Support End Caps pg End Caps pg Rosettes pg. 74 -Rods and ecorative Rods pg Rod Tubes and Plug in Sockets pg. 78 -Rod Infill Holders pg Rod Infill Connectors pg Wire Rope Holders pg Wire Rope and Terminals pg. 85 -Panel Holders and Profiles pg Glass Panel Retainers pg Glass Fittings ESG pg Glass Fittings VSG pg Flat Post Components pg Canopy System Components pg Spiral Staircase Components pg Quick Connecting System Components pg Hollow ecorative Balls pg Solid ecorative Balls pg ecorative End Caps pg Welding Plates pg ishes and Welded Stappers pg Hinges pg Assembly Aids pg Nuts, Screws and Bolts pg Gluing Pistol and Gluing Instructions pg Hand Tools pg General Maintenance and Accessories pg Flow rilling & Flow Tapping pg Custom Handrail Projects pg Contents 3 ETI S3 Terms and Conditions pg. 122 Notes pg. 123 ETI Stainless Steel Systems catalog A1-PR SRP $15.50

4 Efficient-Tec International LLC. 4

5 5

6 Efficient-Tec International LLC. 6

7 7

8 Efficient-Tec International LLC. Handrail Introduction 8

9 Handrail Introduction Ef cient-tec International LLC offers a complete handrail solution for your code compliant projects. ETIs S3 (stainless steel systems) handrail solutions can meet any requirement, either from our standard line of products or with modi cation from the in house engineering and fabricating staff. esign: modular non-welded system or welded systems. Your solutions are all here whether using our new LE illuminated handrail (LERail ), standard guardrail, stairway handrail or spiral staircase handrail. The choices for project compliments are expanded with our standard steel rod, cable or glass guardrail in lls. Our product line gives architects, designer and speci ers multiple options in ttings, mountings and decorative elements that will deliver the quality product demanded by ETI clientele. We look forward to assisting your next handrail solution Sincerely Ef cient-tec International LLC, S3 Handrail Systems internal M10 bolt tube connector stair fitting loosen internal M10 bolt and rotate beveled plates on fitting to adjust angle +/- 5 end cap stainless steel rill and tap for (2) M5-0.8 BHCS at each post attachment (typ.) saddle M5-0.8 x 12mm BHCS for rail attachment straight handrail support, screw into post cap M6-1.0 x 10mm FSHCS for saddle to handrail support attachment use on all level guardrail tube connector tube connector 90 elbow adjustable angle handrail support, screw into post cap (use on sloped guardrail only) NOTE: all connections are to be assembled with 2 part epoxy, elo uopox 1895, or with fasteners bottom holder stainless steel tube field cut as required, all ends deburred. mounting bolts (x3) Handrail Introduction typical rail 9

10 Efficient-Tec International LLC. 10

11 Handrail Code Compliance S3 handrails are always built to AA, IBC and IRC codes but can be specified according to any of the listed bulding standards. OWN E UP LANING 2N FLOOR Incorporating S3 handrail into your project: When requesting a quotation or specifying our handrail products, please provide as much information as possible in order to insure a more accurate specification and quotation. Fully dimensioned plan view and elevation view drawings are requested in order to fully understand the scope of the project. Upon acceptance of the order, we will prepare detailed approval drawings for field verification and acceptance by the customer. Once the drawings are verified for accuracy and approved with a customer signature, we will begin the manufacturing process. Handrails and Guardrails handrails provide guidance guardrails prevent accidental falls Handrails are located above stair nosings or ramps. Guardrails are generally required for ramps, stairs, or landings that are elevated more than 30 off the ground. The guardrail heights will vary depending upon local code, but typically are a minimum of 42 in height above the ramp, stair, or landing finished floor surface. AA compliance 11

12 Efficient-Tec International LLC. LERail is available for curved handrail and spiral staircases. Illuminated Handrail 12

13 LERail Standard LERail part numbers (pricing in 1ft lengths) EAMPLE HB-LR category handrail dia. material finish mounting rail angle light output light beam angle light color prim. voltage infill run length rail height HB-LR LERail 1. Ø Ø satin 2. custom wall mount 2. standard embed mount 3. surface mount level 4. surface mount slope 5. side surface mount (level) custom none 1. high 2. medium 3. low none custom none 1. white 2. warm white 3. red 4. blue 5. green 6. yellow none ~ ~ ~ none 1. none 2. infill 3. 3/8 clear glass 4. horizontal rods 5. vetical rod picketts 6. horizontal cables 7. custom 1. specify (in decimal in) custom LERail available for curved rail and spiral staircases 3 3 1/2 4 5/8 60W multiple input voltage/ multiple output current transformer included. (wet location rated) 33' maximum run per power feed cable 33' maximum run per power feed cable handrail support LE Light Bar power supply wire optional rosette handrail post high power LE Light Bar low power LE Light Bar or LE rope light grout pipe sleeve embed lens cover STANAR AA Compliant Handrail & Top Cap Ø 1.67" conduit standard post wire feed (other options available) wire gasket (2) Ø 1/4 anchors Illuminated Handrail bent tube support with wall flange optional handrail supports on pages or 60 beam angle 13 conduit handrail support with wire feed (other options available)

14 Efficient-Tec International LLC. Illuminated Handrail 14

15 LERail Illuminated Handrail 15

16 Efficient-Tec International LLC. Illuminated Handrail 16

17 LERail basic construction LERail stainless steel profile tube LE Light Bar (white) STANAR AA Compliant Handrail & Top Cap Ø 1.67" clear polycarbonate lens remote power supply incl. High Output Power LE Light Bar High Output Light Bar specs 120~ lumens IP = per ft. min. length LE spacing HB-LR consum. 5W per ft. W, WW B, G, R & Y The high output Light Bar provides 200 lumens per linear foot and is for area lighting and wide stairways. This high output version consumes 5 watts per foot, and is sealed by an aluminum housing encased in clear resin outdoor wet-location listed. It operates on 12VC power. High Output Power LE Light Bar Module High Output Light Bar Module specs 120~ lumens IP = per ft. length 4.13 per module 1.34 LE spacing HB-LR consum. 5W per ft. W, WW B, G, R & Y (pricing in 1ft The lenghts) high output Light Bar Module provides 200 lumens per linear foot and is for area lighting and wide stairways. This high output version consumes 5 watts per foot, and is sealed by an aluminum housing encased in clear resin outdoor wet-location listed. Light Bar Modules are intended for curved LERail applications. It operates on 12VC power. Medium Output Power LE Light Bar Medim Output Light Bar specs HB-LR ~ lumens IP = per ft. min. length LE spacing consum. 1.25W per ft. W, WW B, G, R & Y The medium output Light Bar provides approx. 120 lumens per linear foot for guard rail and narrow step handrail applications. This medium output version has 18 LEs per foot and is encased in a clear resin which is outdoor wet-location listed. It operates on 12VC power. Low Output Power LE Rope Light The low output Rope Light provides approx. 15 lumens per linear foot for guard rail and narrow step handrail applications. This low output version has 36 LEs per foot and is encased in a clear UV stabilized PVC material which is outdoor wet-location listed. It operates on 120VAC or 24VCpower. Low Output Rope Light specs 120VAC 120~ 70 lumens per ft. IP Low Output Rope Light specs 24VC 24= 70 lumens per ft. IP cut lengths 6.6 cut lengths 3 LEs per inch spacing 3 LEs per inch spacing HB-LR R,Y 1.44W/ft B,W,G 2.40W/ft W color 2.64W per ft. RGB 2.08W/ft HB-LR transf. incl. Illuminated Handrail 17

18 Efficient-Tec International LLC. LERail available Walkway Guardrail & Handrail 18

19 Guardrail and Handrail Standard Guardrail part numbers (pricing in 1ft lenghts) EAMPLE HB-NR category handrail dia. material finish mounting rail angle light output light beam angle light color prim. voltage infill run length rail height HB-NR S3 Rail 1. Ø Ø satin 2. custom wall mount 2. standard embed mount 3. surface mount level 4. surface mount slope 5. side surface mount (level) custom none 1. high 2. medium 3. low none custom none 1. white 2. warm white 3. red 4. blue 5. green 6. yellow none ~ ~ ~ none 1. none 2. infill 3. 3/8 clear glass 4. horizontal rods 5. vetical rod picketts 6. horizontal cables 7. custom specify in decimal inches custom LERail available for curved guardrail stainless steel tube drill and tap for (2) M5-0.8 BHCS at each post attachment optional rosette on page 74 *guardrail LERail available handrail support base, attach to post with FSHCS x 30mm FSHCS post (optional handrail) stainless steel tube drill and tap for (2) M5-0.8 BHCS at each handrail support post 1-1/2 min. set screw for height adjustment handrail support for sidemount base holder optional rectangular bottom holder on page 48 optional wall bracket on pages typical guardrail with optional sidemount handrail attachment (guardrailing available with handrail and decorative infills) set screw N.S. & F.S. for handrail support attachment tube connector optional tube connectors on pages typical post mounting to walway surface stainless steel post Walkway Guardrail & Handrail 19

20 Efficient-Tec International LLC. LERail available Walkway Guardrail & Handrail 20

21 Guardrail & Handrail Walkway Guardrail & Handrail 21

22 Efficient-Tec International LLC. LERail available Stairway Handrail & Guardrail 22

23 Stairway Handrail and Guardrail Standard Stairway Handrail / Guardrail part numbers (pricing in 1ft lengths) EAMPLE HB-NR category guardrail dia. material finish mounting rail angle light output light beam angle light color prim. voltage infill run length rail height HB-NR S3 Rail 1. Ø Ø satin 2. custom wall mount 2. standard embed mount 3. surface mount level 4. surface mount slope 5. side surface mount (level) custom none 1. high 2. medium 3. low none custom none 1. white 2. warm white 3. red 4. blue 5. green 6. yellow none ~ ~ ~ none 1. none 2. infill 3. 3/8 clear glass 4. horizontal rods 5. vetical rod picketts 6. horizontal cables 7. custom specify (in decimal in) custom LERail available for curved stairways *stairway LERail available Ø 1.67 handrail / guardrail available in 20ft max lengths guardrail / handrail connector optional connectors on page guardrail cap optional guardrail cap on pages handrail / guardrail available in 20ft max lengths 4 max handrail 34 min guardrail 42 min Ø.55 rod infill shown rod infill details on pages optional wire rope infills on pages optional glass panel components on pages standard stair mounted round bottom holder optional side mount post base on pages optional underside mount post base on page 52 stair Stairway Handrail & Guardrail 23 typical stair handrail / guardrail combination with vertical posts affixed to stair

24 Efficient-Tec International LLC. Wire Rope In lls 24

25 Wire Rope In lls stainless steel wire rope tensioning fittin end post drill and tapped for end terminals terminal stainless steel Ø 5mm wire rope terminal jam nut jam nut jam nut eye bolt end post drill and tap for eye bolt intermediate post with through holes for cable wire rope infill detail standrard handrail optional handrail end caps on pages stainless steel handrail stainless steel wire rope tensioning fitting adjustable angle handrail holder post end cap () optional post end caps on pages stainless steel Ø 5mm wire rope stainless steel handrail post Wire Rope In lls 25

26 Efficient-Tec International LLC. Steel Rod Handrail In lls 26

27 Rod In lls cross rod holders (typ.) stainless steel tube drilled and tapped for (2) M5-0.8 BHCS at each post attachment 4 typ. stainless steel Ø 0.47 rod infill bent to spec. 3 typ. typical rod infill for guardrail typical rod infill for guardrail / handrail combination Steel Rod Handrail In lls 27

28 Efficient-Tec International LLC. Glass Handrail In lls 28

29 Glass In lls inline glass retainer optional glass retainers on pages optional handrail corners on pages typical glass infill elevation glass infills produced by specified vendor (clear glass infill shown) HB-C inline panel retainer glass panel glass panel HB C dual panel retainer rounded glass clamp Glass Handrail In lls 29 typical glass connection to post

30 Efficient-Tec International LLC. LERail available Spiral Staircases 30

31 Spiral Staircase Systems Standard Spiral Stair Handrail part numbers EAMPLE HB-SR category handrail dia. material finish stair diameter height of run no. of steps light output light beam angle light color prim. voltage total stair angle stair direct. stair width infill HB-SR S3 Spiral Rail 1. Ø Ø satin 2. custom custom custom custom high none custom none 1. white 2. warm white 3. red 4. blue 5. green 6. yellow none ~ ~ ~ none custom 1. up right 2. up left custom rod O.A. stair dia. 6ft steps at 22 ea. 270 total stair angle stair #1 at bottom stair #12 at top of run stairs from 1st floor to second floor rotates clockwise or to the right vertical post spiral stair system adjustable spacer with vertical post attachment spiral stair system adjustable central spacer element *spiral LERail available Spiral Staircases stairs panels available upon special request 31 spiral stair system adjustable spacer

32 Efficient-Tec International LLC. LERail available Spiral Staircases 32

33 Spiral Staircase Systems Spiral Staircases 33

34 Efficient-Tec International LLC. The Quick Connect System 34

35 The Quick Connecting System (a non-weld handrail system) Standard Flat Post System (pricing in 1ft lengths) EAMPLE HB-QC category post dia. handrail dia. material finish mounting infill style run quantity run length HB-QC S3 Quick Connect 1. Ø Ø Ø custom Ø Ø Ø satin 2. custom surface mount (level) 1. vertical rod 2. vertical custom 3. horizontal custom custom 4ft max. standard Quick Connect railing Quick Connect railing with decorative post caps Quick Connect grommets on page 103 decorative rod options on page drill hole and install wedge anchor base screw place post over base screw secure post with socket extension and industrial nut place rubber grommets into post openings apply S3 post lubricant to grommets insert posts and secure with steel wire The Quick Connect System 35

36 LERail available ouble Flat Bar Posts 36

37 Standard Flat Post System (pricing in 1ft lengths) EAMPLE HB-FP category post dia. handrail dia. material mounting infill style run quantity run length HB-FP S3 Flat Post x custom Ø Ø Ø stainless steel 2. aluminum surface mount (base plate) 2. wall mount (base plate) 3. embed mount 1. vertical rod 2. glass 3. custom custom custom 4ft max. cap tube HB-C F inline panel retainer HB glass clamp 2 1/4 42 Ø 0.47 roc typ. glass infill option HB C fascia mount bracket 4.72 sq. 48 max. fascia mount 1-15/16 horizontal offset cap option 3-3/4 inline cap option material: cap, infil and fittings stainless steel (typ.) Ø 4.72 cover plate bar embed material: aluminum post double bar 2.0 x finish: powder coat ouble Flat Bar Posts 37 embed mount option base plate mount option

38 Efficient-Tec International LLC. Glass Canopies 38

39 Glass Canopies Standard Glass Canopy part numbers EAMPLE HB-GC category wall bracket profile glass length glass width canopy angle canopy support canopy qty. HB-GC Glass Canopy 1. round 2. rectangular ft 2. 4 ft 3. 6 ft 4. 8 ft ft ft custom 1. 1 ft 2. 2 ft 3. 3 ft 4. 4 ft 5. 5 ft 6. 6 ft custom custom 1. rod 2. catilever bracket insulated precast concrete wall round wall bracket / rod connector optional rectangular wall bracket on page 99 M12 threaded rod 1/2 glass canopy (color and vendor T.B..) glass canopy / rod retainer wall bracket / glass canopy connector optional rectangular wall bracket on page 99 Glass Canopies typical wall mounted canopy 39

40 Efficient-Tec International LLC. Glass Canopies 40

41 Glass Canopies Glass Canopies 41

42 Stainless Steel Novelties 42

43 Stainless Steel Illuminated Closet Rod clear space (236 max.) center bracket 64 O.C. stainless steel profile tube with intergrated LE light bar and lens wood blocking (by others) set screw on top side stainless steel flange x3 countersunk hole for a #10 FH screw Illumination high output LE lightbar Specifications 12VC IP lumens per foot 5 watt per/ft consumption color: white section stainless steel profile tube with intergrated LE lightbar and lens Stainless Steel Novelties 43

44 Stainless Steel Novelties 44

45 Stainless Steel Ground mounted Light Module profile tube HB *** with intergrated LE light bar and lens end cap typ Ø 12mm rod HB *** rotatable fitting typ. HB tube Ø 42.4mm x 12 long HB *** wire feed Illumination high output LE lightbar outdoor wet-location listed 12VC Specifications IP lumens per foot 5 watt per/ft consumption color: white Stainless Steel Novelties 45

46 Stainless Steel Novelties 46

47 Stainless Steel Outdoor / Indoor LERod Module dome end cap tube Ø 42.4mm x 2 long HB *** 2 lens cap profile tube Ø 1.67 x 42 long HB *** with integrated LE light bar 42 with x2 LE light bars Illumination high output LE lightbar outdoor wet-location listed 12VC Specifications IP lumens per foot 5 watt per/ft consumption color: white tube Ø 42.4mm x 18 long HB *** 18 Stainless Steel Novelties 47

48 ETI-S3 components designed in allas Texas and machined in Rosenthal Germany Round bottom holder plate dia. plate thickness no. of thru holes & hole dia. thru hole dist. connecting tube dia. HB HB HB HB HB HB HB HB Ø 3.94 Ø 3.94 Ø 4.72 Ø 4.72 Ø 3.94 Ø 3.94 Ø 4.72 Ø x x x x x x x x Ø 0.51" 0.39" 1.97" Rectangular bottom holder HB HB plate size 4.72 x x 1.97 plate thickness no. of thru holes & hole dia. 2 x x 0.51 connecting tube dia Ø 0.51" 0.39" 1.97" Bottom Holders Bottom holder plug (no thread) washer dia. hole dia. T washer thickness connecting tube dia. 1.97" 48 HB HB HB HB Ø 1.97 Ø 2.36 Ø 1.97 Ø 2.36 Ø 0.33 Ø 0.33 Ø 0.43 Ø 0.43 Ø 0.20 Ø 0.31 Ø 0.20 Ø 0.31 T

49 Bottom holder plug ( or M10 thread) washer dia. thread T washer thickness connecting tube dia. 1.97" HB HB HB HB Ø 1.97 Ø 2.36 Ø 1.97 Ø 2.36 M10 M Ø 0.65" T Bottom holder plug with washer ( or M10 thread) washer dia. thread T washer thickness connecting tube dia. 1.97" HB HB HB HB Ø 1.97 Ø 2.36 Ø 1.97 Ø 2.36 M10 M / / / / 0.31 T T Round wall bracket plate dia. dist. thru hole thru hole dia. connecting tube dia. HB HB HB HB Ø 4.72 Ø 4.72 Ø 4.72 Ø custom 2 x x x x Ø 4.27 Ø 1.57" 2.36" 1.57" *custom lengths available up to 4.72 Ø 1.67" Bottom Holders / Wall Brackets 49

50 Rectangular wall bracket HB HB HB plate size 4.72 x x x 1.5 dist custom thru hole 2 x x x 0.51 thru hole dia connecting tube dia. 4.72" 3.54" 2.36" 1.57" *custom lengths available up to " Ø 1.67" 135 outside corner wall bracket dist. thru hole connecting tube dia. angle HB HB HB HB custom 2 x x x x 0.51 *custom lengths available up to x 0.39" 5.51" 3.94" 0.98" 1.57" Ø 0.51" 5.51" 1.57" 90 outside corner wall bracket dist. thru hole connecting tube dia. angle 5.51" 0.98" HB HB HB HB custom 2 x x x x " Ø 0.51" 1.57" 3.94" 1.57" *custom lengths available up to " x 90 inside corner wall bracket dist. thru hole connecting tube dia. angle 5.51" 0.98" HB HB HB HB custom 2 x x x x " 5.51" Ø 0.51" 1.57" 3.94" 1.57" Wall Brackets 135 inside corner wall bracket *custom lengths available up to 4.72 dist. thru hole connecting tube dia. angle 50 HB HB HB HB custom 2 x x x x " 5.51" 3.94" 1.57" Ø 0.51" 5.51" *custom lengths available up to " 1.57"

51 Round wall bracket 0.39" plate dia. height thru hole connecting tube dia. R 0.83" HB HB HB Ø 4.72 Ø 4.72 Ø x x x 0.51 Ø.98" 1.57" Ø 4.72" Round wall bracket plate dia. height thru hole connecting tube dia. Ø 0.33" HB HB HB HB Ø 3.94 Ø 3.94 Ø 3.94 Ø x x x x 0.41 Ø 0.91" R 0.83" 0.41" 2.76" Ø 3.94".24" Rectangular wall bracket plate size height thru hole connecting tube dia. Ø 0.98" Ø 0.51" Wall Brackets HB HB x x x x 0.51 R 0.83" 1.57" 4.72" "

52 Underside mounted bottom holder 0.79" 2.76" 5.71" connecting tube dia. 1.57" Ø 0.51" HB Underside Mounting Brackets Underside mounted bottom holder dimension connecting tube dia. 5.71" 8.66" 0.79".24" 52 HB x " 18.31" 1.02" 0.79"

53 Rectangular plate 4.72" 3.54" plate size mounting thru hole dia. center thru hole dia. 1.97" HB x x 0.51 Ø 0.43 Ø 0.51" Ø 0.43" Rectangular plate with thru hole 4.72" 3.54" plate size mounting thru hole dia. center thru hole dia. 1.97" HB HB x x x x 0.51 Ø 1.34 Ø 1.69 Ø 0.51" center thru hole Round 2 hole plate plate dia. plate thickness mounting thru hole dia. thru hole dist. Ø 0.51" Ø 0.43 HB HB Ø 3.94 Ø x x " Round 3 hole plate plate dia. plate thickness mounting thru hole dia. thru hole dist. Ø 0.51" Ø 0.43" HB HB Ø 3.94 Ø x x " Round 2 hole plate with 2 countersunk thru holes Plates plate dia. plate thickness mounting thru hole dia. 1.57" HB HB Ø 3.94 Ø x x " Ø 0.98" Ø 0.43" 53

54 Round 2 hole plate with large thru hole plate dia. plate thickness mounting thru hole dia. center hole dia. center thru hole HB HB HB HB Ø 3.94 Ø 3.94 Ø 4.72 Ø x x x x 0.51 Ø 1.69 Ø 1.69 Ø " Ø 0.51" Round 2 hole plate with 2 thru holes Ø 3.94" Ø 2.76" plate dia. plate thickness mounting thru hole dia. Ø 0.5" HB Ø x 0.51 Ø 0.3" Ø 2.0" Round 2 hole plate with small thru hole Ø 2.76" plate dia. plate thickness mounting thru hole dia. mount hole dist. center hole dia. 0.24" Ø 0.33" Ø 0.35" HB Ø x Ø 0.35 Ø 1.97" Round beveled plate with small thru hole plate dia. plate thickness counter bore dia. 0.20" Ø 1.97" counter bore HB HB HB HB Ø 1.97 Ø 1.97 Ø 1.97 Ø Ø 0.47 Ø 0.55 Ø 0.71 Ø 0.98 Ø 0.33" Plates Round plate with beveled countersunk thru hole plate dia. plate thickness thru hole dia. 0.39" HB HB Ø 1.97 Ø Ø 0.41 Ø 0.41 Ø 0.41"

55 Round plate with countersunk thru hole plate dia. T plate thickness center thru hole dia. T Ø 0.65" HB HB Ø 1.97 Ø Ø 0.65 Ø 0.65 Round plate with thru hole plate dia. T plate thickness center thru hole dia. 0.16" Ø 1.38" Ø.33" HB Ø Ø tube, 320 finish, i interior i seam smoothed HB HB HB HB HB HB max available tube length (sold in inches) tube dia. x wall thickness Ø 0.98 x 0.08 x 0.10 x 0.10 x 0.08 Ø 1.90 x 0.08 Ø 1.90 x 0.10 Slot tube K320 finish (for LERail ) *special order lengths available up to 236 Plates / Tubes max. available tube length (sold in ft.) channel width channel depth tube dia. x wall thickness HB HB ft 10ft x 0.08 Ø 1.90 x

56 Holder for tube with thru hole 1.97" HB Ø 0.43" Holder for tube with M10 thread thread 1.97" HB M10 M10 Holder for tube with M10 thread thread 1.97" HB M10 M10 Holder for tube with M12 thread thread 2.68" HB M12 M12 Tube Holders Holder for tube with thru hole 1.77" 56 HB Ø 0.33"

57 Holder for tube with thread thread 1.77" HB Holder for tube with M10 thread thread 1.77" HB M10 M10 Adjustable handrail / post connector HB HB HB A angle connection 25 +/ / /- 5 connecting tube dia. Ø " 1.13" 1.15" Ø 1.67" 0.28" Ø 1.67" 1.67" A Tube Holders / Connectors 57

58 90 handrail connector part no. HB angle connection " 1.13" 1.15" Ø " Ø 1.67" 0.12" 0.28" Handrail / post connector Ø 1.67" 0.83" HB " 1.13" 1.15" 0.28" Ø 1.67" 180 handrail / post connector Ø 1.67" 0.63" 0.63" HB " 1.13" 1.15" Ø 1.67" 0.28" Ø 1.67" 90 handrail / post gooseneck connector 2.52" +/-.04" HB angle connection " 2.36" 0.83" Ø 1.67" Corner Connectors 135 handrail / post gooseneck connector 1.85" +/-.04" Ø 1.67" 58 angle connection Ø 0.98" 2.36" HB Ø 1.67"

59 1.97" Handrail to post gooseneck terminator 0.98" 1.14" HB Ø 1.67" Ø 0.98" 2.36" Ø 1.67" 180 handrail / post gooseneck connector 0.98" 0.98" Ø 0.98" 2.36" Ø 1.67" HB Ø 1.67" 135 handrail connector " HB HB " +/-.04" Handrail connector 1.97" 1.97" 0.20" HB handrail connector HB HB angle length 2.36 ± ± " 1.97" Tube Connectors / Corners 59

60 90 curved handrail connector 1.97" angle length HB HB ± ± " Adjustable handrail connector angle = +/ " HB HB HB HB HB HB ± 5 35 ± 5 45 ± 5 25 ± 5 35 ± 5 45 ± " Adjustable ball and socket handrail connector adjustable angle 1.97" " HB HB Tube Connectors 60

61 90 swivel handrail connector 2.56" rotation angle connecting tube dia. HB rotating joint 90 lockable swivel handrail connector 1.97" 2.56" rotation angle HB rotating joint 1.97" 180 pivot tube coupling Ø 1.67" 1.67" HB " 45 adjustable coupling A angle radius A +/- 5 HB HB HB HB HB HB HB HB HB Adjustable ball and socket handrail / tube coupling HB HB ± 5 35 ± 5 45 ± 5 25 ± 5 35 ± 5 45 ± 5 25 ± 5 35 ± 5 45 ± 5 angle variable radius Ø 1.67" 1.97" " Ø 1.67" Tube Couplings / Connectors 61

62 System coupling.35" HB HB HB connection 90 level 90 level 90 level radius " 1.97" 90 coupling 0.35" connection R radius 0.16" 1.97" HB HB HB level level level R 90 rotating coupling R radius 1.77" HB HB HB " R Rotating parallel coupling R1 R2 1.18" HB HB HB R1 R2 Tube Couplings Ø 1.18" 62

63 Curved handrail support Ø 0.47" plate size no. of holes x hole dia. blade HB x x x 2.76 Ø 2.76" Ø 1.97" Ø 0.33" 3.35" Curved handrail support with handrail plate R 0.83" plate size no. of holes x hole dia. blade handrail plate Ø 0.47" HB x x x x 0.94 Ø 2.76" Ø 1.97" Ø 0.33" Curved handrail support with adjustable handrail plate 3.35" R 0.83" Handrail Supports HB plate size 2.76 x 0.24 no. of holes x hole dia. 2 x 0.33 blade 2.76 x 2.76 handrail plate 2.52 x 0.94 Ø 2.76" Ø 1.97" Ø 0.33" Ø 0.55" "

64 Telescoping handrail support with circular handrail plate HB HB Ø 2.76" Ø 1.97" Ø 0.33" adjustable height 2.52" 0.55" Telescoping handrail support with handrail plate R 0.83" plate dia. thread adjustable height HB Ø 1.97 Ø 1.97" 2.40" 0.55" Telescoping handrail support with handrail plate R 0.83" plate dia. mounting hole dia. handrail plate adjustable height HB Ø 2.76 Ø x 0.94 Handrail support 1.97" Ø 2.76" Ø 1.97" Ø 0.33" 2.52" 0.55" plate dia. connecting tube dia. connecting screw 1.67" HB Ø 1.97 M6 2.95" Handrail Supports Telescoping handrail support for glass infills 2.95" adjustable height 64 HB Ø 0.98" Ø 1.97"

65 Rotating height adjusting handrail support 2.48" connecting tube dia. adjustable height HB U HB U R Ø 0.98" 2.76" 180 pivoting handrail support connecting tube dia. 1.42" HB Adjustable post cap HB connecting tube dia. 1.67" Ø 1.67" Ø 0.55" 0.59" 0.71" 1.57" Handrail Support Components "

66 Handrail support post length dia. thread inside " HB Ø 0.55 M6 M6 Ø 0.55" Handrail support post length dia. thread outside M6 3.94" HB Ø 0.55 M6 Ø 0.55" Round handrail support plate HB HB M6 M6 Ø 0.55" 90 handrail corner with M6 thread for post support 2.52" +/ " 2.52" +/-.04 M6 Ø 0.55" Ø 1.67 Handrail Support Components Handrail support plate HB plate size connecting tube dia. 1.97" Ø " 1.67" 66 HB HB HB HB x x x x 0.94 Ø " Ø.26" Ø 0.28

67 90 handrail support plate 1.97" HB plate size 2.52 x 0.94 connecting tube dia. Ø 1.67 / " 0.49" 1.08" 0.98" handrail support plate plate size connecting tube dia. 135 HB x 0.94 Ø 1.67 / " 1.08" Handrail support post with thread A B A A A B HB HB HB HB length dia. Ø 0.47 Ø 0.55 Ø 0.47 Ø 0.55 internal thread outside thread 4.92" 0.39" Articulated handrail support post with thread M6 length dia. internal thread outside thread L=2.68" HB Ø 0.55 M6 Threaded handrail support A B A A B HB HB HB length dia. Ø 0.47 Ø 0.55 Ø 0.55 internal thread M6 M6 M6 / outside thread - M6 0.39" Ø 0.55" 2.68" 0.39" Handrail Support Components 67

68 S-shaped handrail support 4.33" 1.57" internal thread outside thread size 0.39" HB HB M x x " Ø 0.47" 90 handrail support 2.76" dia. inside thread size Ø 0.47" M6 HB Ø 0.47 M6 / 2.76 x " Handrail Support Components articulated handrail support HB dia. Ø 0.55 inside thread M6 / blade 2.76 x 2.76 Ø 0.55" 2.76"

69 Handrail support end cap Ø 1.67" 50 HB ".98" Handrail support end cap 0.55" HB ".76" Handrail support end cap 1.67" 0.55" 0.31" HB ".26" Handrail Support End Caps 69

70 Handrail support end cap 1.67" 0.31".16" HB " Handrail Support End Caps Handrail support end cap thread x wall thickness 70 HB HB HB HB x.08 x.10 x.08 x " 0.43"

71 Handrail support end cap thread x wall thickness Handrail support end cap HB HB HB HB HB HB thread x.08 x.10 x.08 x.10 Ø 1.90 x.08 Ø 1.90 x.10 x wall thickness 0.71" 0.43" Handrail Support End Caps HB HB HB HB HB HB HB x.08 x.10 Ø 1.58 x.08 x.08 x.10 Ø 1.90 x.08 Ø 1.90 x " 0.43" 71

72 End cap x wall thickness HB HB HB HB x.08 x.10 x.08 x " 0.43" End cap End Caps 72 HB HB HB HB HB HB HB HB HB HB HB x wall thickness Ø 0.84 x.08 Ø 1.06 x.08 x.08 x.10 Ø 1.58 x.08 x.08 x.10 Ø 1.90 x.08 Ø 1.90 x.10 Ø 2.37 x.08 Ø 2.37 x " 0.43"

73 End cap x wall thickness HB HB HB HB HB HB HB HB Ø 0.98 x.08 Ø 1.06 x.08 x.08 x.10 x.08 x.10 Ø 1.90 x.08 Ø 1.90 x " 0.43" End cap Ø 1.67" x wall thickness thru hole dia. Ø 0.48" HB HB x.08 x End cap x wall thickness thru hole dia. Ø 1.67" Ø 0.48" HB HB x.08 x.08 Ø 0.48 Ø 0.48 End cap x wall thickness Ø 1.67" HB HB HB HB HB HB x.08 x.10 x.08 x.10 Ø 1.90 x.08 Ø 1.90 x " End cap End Caps x wall thickness Ø 1.67" HB HB HB HB HB HB x.08 x.10 x.08 x.10 Ø 1.90 x.08 Ø 1.90 x " 73

74 Rosette dia. x thickness thru hole dia. HB HB HB HB Ø 4.13 x 0.63 Ø 4.13 x 0.63 Ø 4.13 x 0.63 Ø 4.13 x 0.63 Ø 1.91 Ø 2.0 Rosette dia. x thickness thru hole dia. HB HB HB Ø 4.92 x 0.63 Ø 4.92 x 0.63 Ø 4.92 x 0.63 Ø 1.91 Ø 2.0 Rosette dia. x thickness thru hole dia. HB HB Ø 1.77 x 0.39 Ø 1.77 x 0.39 Ø 0.47 Ø 0.55 Rosette dia. x thickness thru hole dia. HB HB HB HB Ø 2.99 x 0.51 Ø 2.99 x 0.51 Ø 2.99 x 0.51 Ø 2.99 x 0.51 Ø 0.47 Ø 0.55 Rosettes 74

75 Rods rod dia. length (rod sold in inches) HB HB Ø 0.47 Ø max 118 max *special order rods available up to 236 ecorative rods rod dia. length HB Ø ecorative rods ecorative Rods HB rod dia. Ø 0.47 length

76 ecorative rod rod dia. length HB Ø ecorative rod rod dia. length HB Ø ecorative rod rod dia. length HB Ø ecorative rod rod dia. length HB Ø ecorative Rods ecorative rod rod dia. length 76 HB Ø

77 ecorative rod rod dia. length HB Ø ecorative rod ecorative Rods rod dia. length HB Ø

78 Plug Ad Ad Bd x Rd x HB Rd Bd Pre-drilled tubes for vertical infills 4"max length tube dia. x thickness tube drill HB HB HB HB x.10 x.08 x.08 x.08 Ø 0.48 Ø 0.48 Ø 0.63 Ø 0.63 Tubes and Rod Sockets 78

79 Rod holder hole R radius connecting tube dia. 0.79" HB HB HB HB HB HB Ø 0.39 Ø 0.47 Ø 0.55 Ø 0.39 Ø 0.47 Ø Ø 0.87" R Rod holder 0.79" hole connecting tube dia. HB HB HB Ø 0.39 Ø 0.47 Ø 0.55 Ø 0.87" Rod holder hole dia. 0.79" Rod In ll Holder HB HB HB Ø 0.63 Ø 0.63 Ø 0.63 Ø.98" "

80 Rod holder Ø 0.87" drill R radius blind hole connecting tube dia. 0.59" HB HB HB HB Ø 0.47 Ø 0.55 Ø 0.47 Ø right right right right 0.79" R radiused for tube Rod holder Ø 0.87" drill R radius blind hole connecting tube dia. 0.59" HB HB HB HB Ø 0.47 Ø 0.55 Ø 0.47 Ø left left left left 0.79" R radiused for tube Rod holder Ø 0.87" 0.59" drill blind hole connecting tube dia. HB HB Ø 0.47 Ø 0.55 right right Rod holder Ø 0.87" 0.59" drill blind hole connecting tube dia. HB HB Ø 0.47 Ø 0.55 left left 0.79" 0.79" Rod In ll Holder Rod holder hole radius connecting tube dia. 1.97" 80 HB HB HB HB HB HB Ø 0.39 Ø 0.47 Ø 0.55 Ø 0.39 Ø 0.47 Ø Ø 0.87" R

81 Rod holder hole connecting tube dia. 1.97" HB HB HB Ø 0.39 Ø 0.47 Ø 0.55 Ø 0.87" Rod holder 0.71" hole thread HB HB Ø 0.47 Ø 0.55 Ø 0.87" Rod holder hole / Y 1.77" 1.10" HB HB HB HB Ø 0.47 / Ø 0.47 Ø 0.47 / Ø 0.55 Ø 0.39 / Ø 0.55 Ø 0.55 / Ø " Y Rod holder hole R radius connecting tube dia. 1.36" 0.98" HB HB HB HB HB HB Ø 0.47 Ø 0.47 Ø 0.47 Ø 0.55 Ø 0.55 Ø Ø 0.87" Ø R Rod In ll Holder 81

82 Traverse rod holder drill connecting tube dia. x HB HB HB Ø 0.39 Ø 0.47 Ø " Ø M6 Rod connector drill HB HB Ø 0.47 Ø " 0.98" rubber O-rings Rod In ll Holders / Connectors Rod connector drill blind hole right left Ø 0.87 Ø " 0.61" 82 HB HB HB HB Ø 0.47 Ø 0.55 Ø 0.47 Ø 0.55 left left right right

83 Rod connector 1.18" drill 0.59" HB HB Ø 0.47 Ø " Rod connector 1.18" drill 0.55" 0.55" HB HB Ø 0.47 Ø 0.55 Rod In ll Connectors 83

84 Wire rope holder 1.49" 0.59" HB HB W wire rope dia. Ø 0.22 Ø 0.22 radius connecting tube dia. W Ø " Wire rope holder 0.59" W wire rope dia. radius connecting tube dia. W HB HB HB HB Ø 0.20 Ø 0.24 Ø 0.20 Ø Ø " Wire rope holder Ø 0.24 hole thread 0.79 HB Ø 0.24 M6 M6 complete clevis assembly with tensioner Wire Rope Holders 84

85 Wire rope holder.25" HB HB HB drill Ø 0.25 Ø 0.25 Ø 0.25 Ø 0.87" Ø 0.87" Wire rope rope dia. HB HB Ø 5mm (0.20 ) Ø 6mm (0.24 ) Threaded wire rope terminal L LI LG for rope dia. thread HB HB Ø 5mm (0.20 ) Ø 6mm (0.24 ) M6 wire Ø a L LI LG a thread 5mm 73mm 35mm 36mm 7.5mm M6 6mm 88mm 40mm 43mm 9mm Terminal with wire rope terminal with wire rope dia. thread HB HB Ø 5mm (0.20 ) Ø 6mm (0.24 ) M6 Wire Rope and Terminals 85

86 Panel holder profile length for glass / plates tube dia. HB Ø Ø 0.71 Ø 0.71 Panel holder 90 corner profile 2.13 for tube dia. blade length HB Ø Panel Holders and Pro les Panel holder profile clamp radius blade length Ø.75" 86 HB HB HB Ø 0.87" min 2.56" / max 2.76"

87 Panel holder radius 0.55" cutout for Ø 0.71" profile tube HB HB HB Ø 0.98" 2.09" Panel holder 1.57" radius 0.59" HB HB HB " 0.98" Panel holder hole for glass / plates 0.39" HB HB " Panel holder radius 0.57" cutout for Ø 0.98" tube HB HB HB Ø 1.18" 2.17" Panel Holders and Pro les 87

88 Glass panel retainer minimum hole Ø 0.71 for glass panels connecting knob dia. connecting tube dia. 0.24" " 1.46" HB HB HB Ø 1.18 Ø 1.18 Ø " +/- 0.2" 0.63" 5.51" Glass panel retainer minimum hole Ø 0.71 for glass panels HB HB HB connecting knob dia. Ø 1.18 Ø 1.18 Ø 1.97 connecting tube dia. 0.24" " 1.46" 0.63" 3.98" +/ " +/ " Glass panel retainer minimum hole Ø 0.71 for glass panels 1.97".24"-.50" connecting knob dia. connecting tube dia. HB Ø " 3.08" Glass panel retainer minimum hole Ø 0.71 for glass panels 1.97" 0.24" " connecting knob dia. connecting tube dia. HB Ø " Glass Panel Retainers Glass panel retainer connecting knob dia. thread connection 9.45" minimum hole Ø 0.71 for glass panels 88 HB HB Ø 1.18 Ø 1.97

89 Glass panel retainer minimum hole Ø 0.71 for glass panels 0.24" " connecting knob dia HB HB Ø 1.18 Ø 1.18 Ø 1.18" Glass panel retainer minimum hole Ø 0.71 for glass panels 0.24" " connecting knob dia. thread 0.31" HB HB Ø 1.97 Ø 1.97 Ø 1.90 Ø 1.97" Glass panel retainer minimum hole Ø 0.71 for glass panels 0.24" " connecting knob dia. connection 0.31" HB Ø 1.18 Ø 1.18" Glass panel retainer minimum hole Ø 0.71 for glass panels 0.24" " connecting knob dia. connection thread HB Ø 1.97 Ø 1.97" Glass panel retainers 0.43" 0.31" minimum hole Ø 0.71 for glass panels 0.43" " Glass Panel Retainers HB connecting knob dia. Ø 2.76 connection thread M " 89

90 Glass fitting ESG Glass fitting ESG connecting tube: for 0.24 and 0.31 glass 1.57" Ø 0.35" 0.94" 1.97" 0.63" T size material T glass thickness HB HB x x solid 316 solid HB HB x x 1.57 zinc die casting zinc die casting Glass fitting ESG connecting tube: Ø 1.33 for 0.24 and 0.31 glass Glass Fittings ESG size 1.57" Ø 0.35" material 1.97" 0.94" T glass thickness 0.63" T 90 HB HB x x solid 316 solid HB HB x x 1.57 zinc die casting zinc die casting

91 Glass Fitting ESG connecting tube: for 0.24, 0.31 and 0.39 glass 1.26" 177" Ø 0.35" 1.10" T 0.63" Ø.24" 2.48" size material T glass thickness connection HB HB HB x x x solid 316 solid 316 solid HB HB HB x x x 1.77 zinc die casting zinc die casting zinc die casting Glass Fitting ESG connecting tube: Ø 1.67 for 0.24, 0.31 and 0.39 glass 1.26" 1.77" Ø 0.35" 1.10" 2.48" 0.63" Ø.24" T size material T glass thickness HB HB HB x x x solid 316 solid 316 solid HB HB HB x x x 1.77 zinc die casting zinc die casting zinc die casting Glass Fitting ESG connecting tube: Ø 1.90 for 0.24, 0.31 and 0.39 glass 1.26" size 1.77" Ø 0.35" material 2.48" 1.10" T glass thickness 0.63" Ø.24" T Glass Fittings ESG HB HB HB x x x solid 316 solid 316 solid Ø 1.90 Ø 1.90 Ø HB HB HB x x x 1.77 zinc die casting zinc die casting zinc die casting Ø 1.90 Ø 1.90 Ø 1.90

92 Glass Fitting ESG connecting tube: for 0.24, 0.31 and 0.39 glass 1.77" Ø 0.35" 1.10" 1.77" 0.63" 0.16" T size material T glass thickness connection HB HB HB x x x solid 316 solid 316 solid HB HB HB x x x 1.77 zinc die casting zinc die casting zinc die casting Glass Fitting ESG connecting tube: for 0.24, 0.31 and 0.39 glass 1.77" 1.10" Glass Fittings ESG size Ø 0.35" material 1.77" T glass thickness 0.63" 0.16" T 92 HB HB HB x x x solid 316 solid 316 solid HB HB HB x x x 1.77 zinc die casting zinc die casting zinc die casting

93 Glass Fitting ESG connecting tube: for 0.31, 0.39 and 0.47 glass 0.16" 0.94" 2.17" Ø 0.35" 1.34" 2.17" 0.63" Ø.24" safety pin T size material T glass thickness connection HB HB HB x x x solid 316 solid 316 solid HB HB HB x x x 2.17 zinc die casting zinc die casting zinc die casting Glass Fitting ESG connecting tube: Ø 1.90 for 0.31, 0.39 and 0.47 glass 0.16" 0.94" size 2.17" Ø 0.35" material 2.17" 1.34" T glass thickness 0.63" T Ø.24" safety pin Glass Fittings ESG HB HB HB x x x solid 316 solid 316 solid Ø 1.90 Ø 1.90 Ø HB HB HB x x x casting 304 casting 304 casting Ø 1.90 Ø 1.90 Ø 1.90

94 Glass Fitting ESG connecting tube: for 0.31, 0.39 and 0.47 glass 1.26" 2.17" Ø 0.35" 1.34 T 0.63" Ø.24" 2.36" size material T glass thickness HB HB HB x x x solid 316 solid 316 solid HB HB HB x x x 2.17 zinc die casting zinc die casting zinc die casting Glass Fitting ESG connecting tube: for 0.31, 0.39 and 0.47 glass 1.26" 2.17" Ø 0.35" " 0.63" Ø.24" T size material T glass thickness HB HB HB x x x solid 316 solid 316 solid HB HB HB x x x 2.17 zinc die casting zinc die casting zinc die casting Glass Fitting ESG connecting tube: Ø 1.90 for 0.31, 0.39 and 0.47 glass 1.26" Glass Fittings ESG size 2.17" Ø 0.35" material 2.36" 1.34" T glass thickness 0.63" Ø.24" T 94 HB HB HB x x x solid 316 solid 316 solid Ø 1.90 Ø 1.90 Ø 1.90 HB HB HB x x x 2.17 zinc die casting zinc die casting zinc die casting Ø 1.90 Ø 1.90 Ø 1.90

95 Glass Fitting VSG connecting tube: for 0.34, 0.42 and 0.50 glass 0.16" 1.10" 2.17" Ø 0.35" 1.34" size material 2.36" T glass thickness 0.63" Ø.24" safety pin HB HB HB x x x solid 316 solid 316 solid HB HB HB x x x 2.17 zinc die casting zinc die casting zinc die casting Glass Fitting VSG connecting tube: Ø 1.67 for 0.34, 0.42 and 0.50 glass 0.16" 1.10" 2.17" Ø 0.35" 1.34" 2.36" 0.63" Ø.24" safety pin T size material T glass thickness HB HB HB x x x solid 316 solid 316 solid HB HB HB x x x 2.17 zinc die casting zinc die casting zinc die casting Glass Fitting VSG connecting tube: Ø 1.90 for 0.34, 0.42 and 0.50 glass 0.16" 1.10" 2.17" size Ø 0.35" material 2.36" 1.34" T glass thickness 0.63" Ø.24" safety pin T Glass Fittings VSG HB HB HB x x x solid 316 solid 316 solid Ø 1.90 Ø 1.90 Ø HB HB HB x x x 2.17 zinc die casting zinc die casting zinc die casting Ø 1.90 Ø 1.90 Ø 1.90

96 Glass Fitting VSG connecting tube: Ø 2.37 for 0.34, 0.42 and 0.50 glass 0.16" 1.10" 2.17" Ø 0.35" 1.34" size material 2.36" T glass thickness 0.63" Ø.24" safety pin T HB HB HB x x x solid 316 solid 316 solid Ø 2.37 Ø 2.37 Ø 2.37 HB HB HB x x x 2.17 zinc die casting zinc die casting zinc die casting Ø 2.37 Ø 2.37 Ø 2.37 Glass Fitting VSG connecting tube: for 0.34 and 0.42 glass 0.16" 1.10" 1.77" Ø 0.35" 1.10" " Ø.24" safety pin T size material T glass thickness HB HB x x solid 316 solid HB HB x x 1.77 zinc die casting zinc die casting Glass Fitting VSG connecting tube: Ø 1.67 and Ø 1.90 for 0.34 and 0.42 glass 0.16" 1.10" Glass Fittings VSG size 1.77 Ø 0.35" material " T glass thickness 0.63" Ø.24" safety pin T 96 HB HB HB HB x x x x solid 316 solid zinc die casting zinc die casting HB HB HB HB x x x x solid 316 solid zinc die casting zinc die casting Ø 1.90 Ø 1.90 Ø 1.90 Ø 1.90

97 Flat post system bracket Flat posts available by special order 1.18" 0.55" base plate connection Ø 0.41" 2.95" HB x " 0.98" Ø 0.51 Flat post system connecting screw 0.39" 0.31" 3.94" x 3.94" 1.18" Flat Post Components HB thread M10 length 1.18 Ø 0.81" Ø 0.81" 97 M10

98 Flat post system handrail support 2.48" 0.41" HB U Ø 0.98" 1.38" 0.38" Flat post system threaded cap 1.02" Ø 0.41" HB " 0.54" 0.47" Flat post system connecting screw 1.18" 0.31" thread length HB M Ø 0.47" Ø 0.47" M6 Flat post system rod holder Ø 0.87" 1 hole 2 hole 1 Flat Post Components Flat post system panel holder HB HB HB HB Ø 0.24 Ø 0.40 Ø 0.48 Ø 0.56 Ø 0.26 Ø 0.26 Ø 0.26 Ø " 0.47" 0.38" 1.18" 2 98 HB hole Ø 0.26 for glass / plates " ".Ø 26" 0.98" 1.38" 0.47"

99 Canopy system wall bracket glass panels available by special order 2.76" 0.39" 0.47" " Ø 0.51" HB " 3.54" 4.72" M " Canopy system wall bracket 0.39" 1.97" HB " 3.54" 4.72" 1.97" Canopy system wall bracket HB M " Ø 4.72" 3.54" M10 Ø 0.51" glass panels available by special order Ø 2.76" 2.56" 0.47" " Ø 0.51" Canopy System Components 99 M "

100 Canopy system wall bracket 0.39" 1.97" HB " 3.54" Ø 4.72" M12 M12 Ø 0.51" Canopy system glass bracket glass panels available by special order 2.26" HB " 0.47" " M12 Ø 2.76" Canopy system threaded rod Ø 12mm (Ø 0.47 ) base plate 37" standard Ø 0.47 HB HB standard 37 special lengths up to 59 M12 M12 Canopy system cantilever bracket glass depth 7.68" 31.42" 39.37" " 5 HB " 7.87" Canopy System Components 7.87" 39.37" 7.87" 100

101 Spiral staircase system description HB U adjustable spacer with decorative screws Ø 1.65 M12 HB U description adjustable spacer with decorative screw and bottom holder description Ø 1.65" Spiral Staircase Components 101 HB decorative screw

102 Spiral staircase system center spacer center hole adjustable height HB U Ø 2.83 custom by project Spiral Staircase Components Spiral staircase system spacer with post bottom holder Ø 2.83" Ø 5.51" 102 HB U Ø 2.83" Ø 5.51"

103 Quick Connect O-rings O-ring for tube dia. Quick Connect lubricant spray HB HB HB Ø 2.0 Quick Connect Components HB

104 Hollow decorative balls Hollow decorative balls Hollow decorative balls surface: 304 polished thread dia. wall thickness HB HB HB HB HB HB M10 M10 M10 M10 M10 Ø 2.36 Ø 3.15 Ø 3.94 Ø 4.72 Ø 5.91 Ø Hollow decorative balls surface: 320 finish thread dia. wall thickness HB HB HB HB M10 Ø 1.57 Ø 1.97 Ø 2.36 Ø ecorative Balls Hollow decorative balls surface: 304 mill finish thread dia. wall thickness 104 HB HB HB HB HB HB M10 M10 M10 M10 M10 Ø 2.36 Ø 3.15 Ø 3.94 Ø 4.72 Ø 5.91 Ø

105 Hollow decorative balls surface: 304 mill finish dia. wall thickness HB HB HB HB HB HB Ø 1.30 Ø 1.65 Ø 2.36 Ø 3.15 Ø 3.94 Ø Solid decorative ball surface: smooth faced thread dia. HB HB HB HB HB HB M6 M6 M6 Ø 0.59 Ø 0.79 Ø 0.98 Ø 1.18 Ø 1.57 Ø 1.97 Solid decorative ball surface: 304 polished thread dia. HB HB HB HB M6 M6 M6 Ø 0.59 Ø 0.79 Ø 0.98 Ø 1.18 Solid decorative ball surface: smooth faced dia. blind hole dia. HB HB HB HB Ø 0.79 Ø 0.79 Ø 0.98 Ø 0.98 Ø 0.40 Ø 0.48 Ø 0.48 Ø 0.56 Solid decorative ball surface: smooth faced ecorative Balls dia. hole dia. HB HB Ø 1.18 Ø 1.38 Ø 0.48 Ø

106 ecorative end cap rod dia. HB HB Ø 0.47 Ø 0.55 ecorative end cap rod dia. HB HB Ø 0.47 Ø 0.55 ecorative end cap rod dia. HB HB Ø 0.47 Ø 0.55 ecorative cap dia. HB HB Ø 0.48 Ø 0.56 ecorative End Caps ecorative cap dia. blind hole dia. 106 HB HB Ø 1.77 Ø 2.17

107 Welding plate surface: mill finish plate dia. thickness HB HB HB HB HB HB HB HB HB HB Ø 1.30 Ø 1.57 Ø 1.65 Ø 1.89 Ø 1.97 Ø 2.36 Ø 2.76 Ø 3.15 Ø 3.94 Ø Welding plate surface: 240 finish plate dia. thickness HB HB HB HB HB HB HB HB HB HB Ø 1.30 Ø 1.57 Ø 1.65 Ø 1.89 Ø 1.97 Ø 2.36 Ø 2.76 Ø 3.15 Ø 3.94 Ø Welding plate surface: 240 finish plate dia. thickness dist. between thru holes no. of thru holes x hole dia. center thru hole HB HB HB HB Ø 4.72 Ø 3.94 Ø 3.15 Ø x x x x Welding plate plate dia. thickness dist. between thru holes no. of thru holes x hole dia. surface: 240 finish center thru hole dia. Welding plates HB HB Ø 4.72 Ø x x 0.43 Ø 1.69 Ø

108 ishes and welded stappers surface: mill finish dish dia. HB HB HB HB HB HB HB HB HB Ø 0.83 Ø 1.30 Ø 1.65 Ø 1.89 Ø 2.05 Ø 2.36 Ø 3.50 Ø 3.98 Ø 4.72 ishes and welded stappers surface: mill finish tube dia. HB HB ishes and welded stappers surface: 240 finish tube dia. HB HB ishes and welded stappers tube dia. thread HB HB x 0.8 x.10 ishes & Welded Stappers ishes and welded stappers tube dia. 108 HB HB x 0.8 x.10

109 Hinges connection connecting tube dia. M16 Hinges connection connecting tube dia. HB M16 Hinges connection connecting tube dia. Hinges connection connecting tube dia. HB HB HB Hinges 109

110 Assembly aids length dia. thread thread outside 4.92" 0.39" A B A A B HB HB HB Ø 0.47 Ø 0.55 Ø Assembly aids radius length dia. HB HB HB HB HB HB Ø 0.98 Ø 0.98 Ø 0.98 Ø 0.98 Ø 0.98 Ø 0.98 Assembly aids A radius hole dia. countersunk screw thread outside dia. x height B A A B B HB HB HB HB Ø 0.33 Ø Ø 0.87 x 0.28 Ø 0.87 x 0.28 Ø 0.87 x 0.28 Ø 0.87 x 0.28 Assembly aids radius hole dia. countersunk screw thread outside dia. x height A B A A B B HB HB HB HB Ø 0.47 Ø M10 M10 Ø 0.87 x 0.24 Ø 0.87 x 0.24 Ø 0.87 x 0.24 Ø 0.87 x 0.24 Assembly Aids 110

111 Screws 304 description for system parts thread pack quantity HB HB HB HB HB counter sunk-head/raised raised head screw counter sunk head screw counter sunk head screw cylinder head screw handrail holder set handrail holder handrail holder cross rod holders glass clamps M5 / M6 M5 x 12mm M6 x 16mm M6 x 25mm x 20mm 1 pc per pack 200 pc per pack 200 pc per pack 200 pc per pack 100 pc per pack Cap nut V2A thread HB U HB U 3/8-16 3/8-16 Wedge anchor 304 length thread HB U HB U /8-16 3/8-16 Inner core for wall brackets core dia. thread gap between threads Nuts, Screws and Bolts HB HB Ø 0.71 Ø 0.63 M

112 ETI-S3 gluing pistol HB ETI-S3 elo-uopox uopox 1895 glue and mixer HB Gluing Instructions Preparation: Mix components A and B in a ratio of 1:1 (use mixing gun or an open dish). egrease and clean the tube with any household cleaner. ry thoroughly Apply elo-uopox to the inside of the tube and end to a depth of 0.3" - 0.4". Gluing Pistol & Instructions 112 Push the tube over the connecting element. If possible, twist the tube while inserting. Avoid contact of the adhesive with skin or textiles. Remove with a dry cloth immediately if necessary. Prepare and glue the maximum number of joints in advance of final assembly. The glue will begin to harden in the distribution nozzle after 25 to 30 minutes. To avoid even the slightest movement of the joints we recommend binding the components between uprights until such time as the glue has cured. Curing: elo-uopox hardens in about 4 hours. Curing to full strength is completed after 24 hours at a temperature of 73 F. If the temperature is lower the curing time is longer. Note: To speed up curing we recommend the application of heat to each joint e.g. with an industrial hot air drier. At a temperature of 180 F the adhesive cures within a few minutes. Temperature Resistance: 396 F

113 ETI-S3 hand grinder HB belt 80 grit HB belt 120 grit HB scotchbright medium HB ETI-S3 drilling tongs HB Hand Tools 113

114 Wire rope crimpers HB K12 and K8 crimping blocks HB K10 and K14 crimping blocks HB Hand Tools 114

115 General maintenance and cleaning instructions Stainless steel needs regular cleaning to remove dirt from general use and to preserve corrosion resistance. Stainless steel is protected from corrosion by a thin layer of chromium oxide. Oxygen from the atmosphere combines with the chromium in the stainless steel to form a passive chromium oxide film that protects from further corrosion. Any contamination of the surface by dirt, salt or other materials hinders this passivation process and traps corrosive agents, reducing corrosion protection. Some form of routine cleaning and/or rinsing is necessary to preserve the appearance and integrity of the surface. Stainless steel is easily cleaned by many different methods. It will actually thrive with frequent cleaning, and unlike some other materials, it is impossible to wear out stainless steel through excessive cleaning. Like any surface that is exposed to the environment, stainless steel can get dirty. irt and soil can consist of accumulated dust and a variety of contaminates that come from many sources ranging from airborne particulates to everyday use. Using water with or without a gentle detergent is sufficient. Any mild non-scratching abrasive creams as in typical household cleaners are effective. These can be used with warm water, bristle brushes, sponges, or clean cloths. Maintenance (cleaning pad) part no. HB Accessories (O-rings) HB HB HB HB o-ring outer dia. x o-ring thickness tube dia. x wall thickness Ø 1.14 x Ø 0.20 Ø 1.14 x Ø 0.18 Ø 0.87 x Ø 0.16 Ø 0.87 x Ø 0.14 x 0.08 x 0.10 x 0.08 x 0.10 Maintenance and Accessories 115

116 Flow rilling Flow drilling creates a bushing in thin walled materials that can serve as a bearing sleeve for inserted parts. The cone shaped bushing can be tapped immediately after the bush is created with our post repositioning clamp. This process called flow tapping produces a tapped surface up to three times thicker than the original tubing wall. S3 flow drilling can provide thin walled handrail tubing with a secure threaded anchoring point. This is ideal for posts and handrail when attaching handrail supports, glass clamps, rod and cable holders. Flow rilling & Flow Tapping 116

117 Flow rilling and Flow Tapping flowed cone 360 rotating tube clamp flow drilling bit tap When the flow drill comes into contact with the material using high axial pressure and rotational speed, the heat generated by friction makes the material malleable enough to be formed and perforated. The flow drill pushes into the heated surface wall. The displaced material forms a collar around the surface of the tubing exterior. The remaining material forms a cone inside the tubing. The flow drill process takes no longer to drill than a normal hole. The resulting collar and cone can be up to three times the original material thickness. The diameter of the cone is precisely determined by the diameter of the flow drill tool. The process does not weaken the tubings internal structure. The resulting cone is uncommonly strong and when flow tapped can provide high torque threaded surfaces with extremely high pull out strength characteristics. Once tubing is locked into place, it can be flowed and tapped without extra setup. Flow rilling & Flow Tapping 117

118 Morton H. Meyerson Symphony Center, allas T seamless handrail and die cast handrail return Custom Handrail 118 Presbyterian Hospital, Plano T combination wood and stainless steel guardrail with glass infills

119 ZALES Executive Offices, Irving T custom stainless steel tube guardrail and handrail Campbell Centre South, allas T brass tube handrailing, floor and wall mounted Custom Handrail 119

120 Texas Cancer Center, esoto T decorative steel uprights with brass handrail, guardrail and post caps Northlake College, Irving T custom stainless steel handrail and steel posts Custom Handrail 120

121 Plaza of the Americas, allas T aluminum uprights with custom powder coated steel handrail cap Baylor Reseaerch Institute, allas T stainless steel exterior handrail Custom Handrail 121

122 standard terms and conditions of sale for stainless steel systems Offer and Acceptance: Purchaser has offered to purchase from Ef cient-tec International, LLC ( Seller ) certain lighting products ( Goods ). Seller s acceptance of this offer is expressly conditioned upon Purchaser s assent to the terms and conditions set forth herein. If terms are submitted in response to a purchase order or other written or oral offer of the Purchaser to purchase the Goods, to the extent that there are any material differences or additions in the terms contained in the Purchaser s offer, the terms listed herein shall be considered a counteroffer to sell the Goods to Purchaser under the terms and conditions herein contained. This Acknowledgment supersedes all previous quotations and agreements relating to the Goods. Purchaser s offer, Seller s counteroffer (if any), and any acceptance there of shall be governed by the laws of the State of Texas. Any action, suit, or other legal proceeding which is commenced to resolve any matter arising under or relating to any provision of this agreement shall be commenced and prosecuted only in a court located in allas County, Texas, and Buyer consents to the jurisdiction of such a court. elivery and Title: Except as may be otherwise speci ed by Seller, delivery will be FOB point of shipment. All shipping dates are estimated and under no circumstances does Seller guarantee date of shipment. Seller shall not be liable for any delay in delivery of any Goods or any other default due to occurrences or contingencies, including, but not limited to, re, ood, embargo, strike, failure to secure materials or labor from usual sources of supply, governmental restrictions considered force majeure, delays occasioned by any subcontractors, acts of God, acts of governmental or military authorities, delay in transportation, labor dif culties or any other circumstances beyond Seller s control which shall prevent Seller from performing in the normal and usual course of it s business. Risk of loss and title to all goods furnished by Seller shall pass directly to Buyer at the FOB point of shipment. Warranties: There are no express warranties hereunder, except that all goods shall be furnished in accordance with the description and speci cations furnished by seller subject to the standard manufacturing variations and practices of seller. All implied warranties (including, but not by way of limitation, implied warranties of merchantability and tness) are hereby excluded. Any outstanding invoice balances beyond the company s payment terms will void all warranties. Any warranty shall expire twelve (12) months following the date of shipment of such products or parts to the purchaser. All warranty rights are valid to the original purchaser of the products or parts. All warranties are nontransferable to a third party. Buyer s Remedies: Claims respecting the condition of Goods or their non-compliance with speci cations must be made by Buyer promptly after receipt of such Goods, and Seller must be given reasonable opportunity to investigate. Buyer shall set aside and hold such Goods, without further processing or installation, until Seller advises Buyer regarding the disposition to be made of it, which advice Seller hereby agrees to furnish within a reasonable time. Any transportation charges involved in such disposition shall be borne by Buyer. Seller s liability for any breach of warranty with respect to goods shall be limited to replacement or repair of non-conforming goods, or, at seller s option, credit of the purchase price thereof. In no event shall seller be liable for any consequential damages or claims for labor, processing or installation by reason of any such breach or warranty. Buyer shall have no right to cover by procuring substitute goods at the cost or expense of seller. Purchaser further agrees to indemnify and hold seller harmless from and against all losses, damages, obligations, liabilities, suits and causes of action arising from any breach of warranty under this section. Any action for breach of this agreement arising out of the sale of Goods must be commenced within one year after the cause of action has accrued, or shall thereafter be forever barred. Prices: Prices are those in effect at the time of shipment. In the event of a published increase or reduction in prices by Seller, the new price will become effective immediately on the unshipped portion of the order at the time of the change. In no event, however, will a reduction in price be retroactive to shipments made prior to the date of the price change. Upon acceptance by Seller, Purchaser s order will not thereafter be subject to cancellation nor to deferment of deliveries without Seller s written consent. Taxes: Purchaser shall reimburse Seller for any sales, use, occupation, excise, or other tax arising out of sales of products or services to the purchaser upon receipt of Seller s invoice for the amount of the tax. At the option of the Company, Purchaser shall provide Seller with a tax exemption certi cate acceptable to the appropriate taxing authorities. Terms of Payment: Payment terms are 30% payment due immediately with the seller s submission of approval drawings. Another 30% will be due to seller immediately upon the purchase of material for the job. A nal 30% will be due prior to delivery of material to the job site. The last 10% will be due within 15 days of nal delivery. In the event of late payments or Seller s insecurity with respect to Buyer s credit standing, Seller in its sole discretion, may change its credit terms, terminate its obligations hereunder and/or requirement in advance of delivery. Pro rata payments shall become due as invoiced. Technical Advice: It is expressly understood that any technical advice furnished by Seller with respect to the use of its goods or services is given without charge and that Seller assumes no obligation or liability for advice given or results obtained, all such advice being given and accepted at Buyer s risk. Terms and Conditions 122 Cancellation or Revisions: Any order may be canceled or revised by Buyer only upon written approval of Seller in its sole discretion, and upon payment of cancellation or revision charges speci ed in said approval which shall take into account expenses previously incurred, commitments made by or in reliance upon such order, whether or not such commitments are legally binding on Seller and any other factors considered relevant by Seller. Limitation on Liabilities: The sole and exclusive remedies of the Purchaser shall be those speci cally set forth above. Seller s maximum liability for any and all claims arising directly or indirectly from the performance of its obligations hereunder, whether resulting from Seller s negligence or otherwise, shall not in the aggregate exceed the purchase price of the Goods. Under no circumstances shall Seller be liable to the purchaser or any third party for loss of business or pro t or any other economic loss, or any incidental indirect, special or consequential damages. Litigation: If Seller prevails in a lawsuit or other action arising out of or related to this sale, the purchased products or services, this agreement, or breach of this agreement, Seller will be entitled to recover its reasonable attorney s fees and costs of suit. Costs include fees for consultations and testimony from experts such as appraisers and engineers. If Seller is required to initiate or defend against litigation with a third party because of the violation by Purchaser of any term or provision of this agreement, or obligation of Purchaser, Seller will be entitled to recover reasonable attorneys fees and costs from Purchaser. Attorney s fees will include those incurred on appeal. Non-waiver by Seller: Waiver by Seller of a breach of any of the terms and conditions of any contract shall not be construed as a waiver of any other breach.

123 Notes 123

124 Efficient-Tec International LLC Wendell Road allas T phone: fax: web: