Wire rope and chain scraper

M-Series, Actuator Overview. Machine Screw Cutaway. UNI-LIFT Machine Screw Actuators offer precise. 12

M-, Actuator Overview UNI-LIFT Machine Screw Actuators offer precise positioning, uniform lifting speeds and capacity up to 250 tons. Standard model configurations include upright or inverted units with

B-Series Section Overview. Ball Screw Cutaway. UNI-LIFT Ball Screw Actuators provide high. 34

B- Section Overview UNI-LIFT Actuators provide high efficiency and high speed in a linear positioning package up to 100 tons. The low friction ball screw and nut design provides longer life at load and

Standard pumps. Dimensions, weights Wilo-CronoLine-IL

Standard pumps Dimensions, weights Wilo-CronoLine-IL Standard pumps Dimensions, weights Wilo-CronoLine-IL Subject to change without prior notice /7 WILO AG / WILO AG Special features/product advantages

TT SERIES OD ORBITAL CUTTING & BEVELING MACHINES 1/8 TO 168 OD 1/9

TT SERIES OD ORBITAL CUTTING & BEVELING MACHINES 1/8 TO 168 OD PRACTICAL TOOLS INC. P.O. Box 233 Aurora, ON L4G 3H3, Canada Phone: 905-727-0014 / 888-847-8880 Fax: 905-727-8483 info@practicaltoolsinc.com

Machine volt/hz Watt r.p.m. kg Plug R ref. ES / EU

ES EP EU STR: Single discs Machine volt/hz Watt r.p.m. kg Plug R ref. ES 330 ES 330 230/50 600 165 22 EU 611500 ES 420 ES 420 duo 230/50 1300/1600 140/280 48 EU 612400 ES 420 230/50 1200 175 40 EU 614205

DÖRRIES SCHARMANN ECOSPEED HSK-A63/80 STARRAG WERKZEUGAUFNAHMEN TOOL HOLDERS HSK A63/80.

DÖRRIES SCHRMNN ECOSPEED HSK-63/80 STRRG STC TOO 800X HODERS WERKZEUGUFNHMEN TOO HODERS HSK 63/80 www.haimer.com POWER SHRINK CHUCK HSK 63/80 (TPER 63 mm/fnge 80 mm) 10 4.5 D3 CERTIFICTE OF QUITY ll functional

Step drills And, with higher dimensional precision the drills will last considerably longer while maintaining the precise process tolerances.

» STEP DRILLS Step drills The flutes of RUKO high performance step drills are CBN ground from the solid hardened form. Because CBN (cubical boron nitride) is a much harder abrasive than even silicium carbide

SMART MOTION C A T A L O G 2009:1

SMART MOTION C A T A L O G 2009:1 Which arm do you need? To ensure that the balancing arm you order meets your expectations it is important to consider the following aspects. 1. Which type? PARALLEL ARM

COMPETENCE IN PRECISION AND QUALITY STEP DRILLS

COMPETENCE IN PRECISION AND QUALITY STEP DRILLS Product information The flutes of new RUKO high performance step drills are CBN ground from the solid hardened form. Because CBN (cubical boron nitride)

E Series Back Pull Out End Scution. Centrifugal Pump DIN 24255

Back Pull Out End Scution Centrifugal Pump DIN 24255 MARKET SECTORS Buidling Services, RHVAC, Agriculture, Civil, Industries Back Pull Out End Suction Centrifugal Pump DIN 24255 MATERIAL OF CONSTRUCTION

COUNTY OF KAUAI DEPARTMENT OF WATER 2005 AMENDMENTS

COUNTY OF KAUAI DEPARTMENT OF WATER 2005 AMENDMENTS to the 2002 Water System Standards adopted by the Hawaii County Department of Water Supply, City and County of Honolulu Board of Water Supply, Kauai

Air Grinders with Collets

Screwdriving technology Automation Air motors Air tools Air Grinders with Collets AngleHead Design Power Output: 130 W, 300 W, 700 W (.17 /.40 /.94 HP) highest power output at a low weight ergonomic highly

Fiberglass rod Steel cages Cable pulling grip

- Civil engineering - Utilities - Road and tunnel building - Cable laying companies - Plant Steel cages Cable pulling grip FIBERGLASS ROD Ø,5 15 mm INCL. WHEELED STEEL CAGE Ø 11 and 15 mm incl. cage 2

Classification of Parts and Accessories in the Customs Tariff. In Brief

Ottawa, May 13, 2014 Memorandum D10-0-1 Classification of Parts and Accessories in the Customs Tariff In Brief The editing revisions made in this memorandum do not affect or change any of the existing

Bylaw No. 859/07 CONSOLIDATED WORKING COPY

CONSOLIDATED WORKING COPY A BYLAW OF THE TOWN OF NIPAWIN FOR THE MAINTENANCE AND MANAGEMENT OF THE WATERWORKS AND SANITARY SEWER SYSTEMS The Council of the Town of Nipawin in the Province of Saskatchewan,

38 Lucerna - LED 01E LED_AU_Lucerna.indd 38 27/12/16 10:39

38 Lucerna - LED Lucerna - LED Technical Specifications: Housing, lid, spokes, and connection for die-cast aluminium pressed poles. Diffuser: Tempered glass, 5 mm thick, withstands thermal shock and impacts.

TUNKHANNOCK BOROUGH WYOMING COUNTY, PENNSYLVANIA

TUNKHANNOCK BOROUGH WYOMING COUNTY, PENNSYLVANIA ORDINANCE # 2007-4 AN ORDINANCE REGULATING THE CONSTRUCTION AND REPAIRING OF ALL SIDEWALKS, CURBS AND GUTTERS IN THE BOROUGH OF TUNKHANNOCK, WYOMING COUNTY,

DIMENSIONS...R20 Series MOUNTING AND SHAFT OPTIONS CONNECTORS SIDE VIEW ENGLISH (INCHES) METRIC (MILLIMETERS) REAR MOUNTED MS CONNECTOR OPTION

DIMENSIONS...R20 Series SIDE VIEW AND THERMISTOR (FLYING LEADS AL) (3.11) (79) SECONDARY 2.28 MAX. 57,9 MAX. 18.0 MIN. 457,2 MIN. REF. R21 6.38 (4.93) R22 7.38 (5.93) R23 8.38 (6.93) R24 9.38 (7.93) REF.

Modifications to the 2012 International Plumbing Code in the City of Maryville

Modifications to the 2012 International Plumbing Code in the City of Maryville 12-202. Local Modifications: The following sections and appendices of the International Plumbing Code, 2012 Edition, are hereby

Modifications to the 2018 International Plumbing Code in the City of Maryville

Modifications to the 2018 International Plumbing Code in the City of Maryville 12-202. Local Modifications: The following sections and appendices of the International Plumbing Code, 2018 Edition, are hereby

Taper Pins, Unhardened DIN 1 B ISO 2339

Taper Pins, Unhardened DIN B ISO 339 Ø.5 Ø Ø.5 Ø 3 Ø 4 Ø 5 Ø 6 Ø Ø 4 Ø 6 Ø 0................ x8... x30 x3 x36... 3x3 3x36 x40 x45 x50... 3x40 3x45 3x50 0x40 0x45 0x50 3x55 0 5 4x55 0 5 5x55 5x60 5x65 6x65

BID RESPONSE LABEL THIS LABEL FOR USE WITH UNITED STATES POSTAL SERVICE DELIVERY RECONDITION MUFFIN MONSTER ELECTRIC (DATE): DEC.

BID RESPONSE LABEL Proposals sent by U.S. Mail should be addressed to Director of General Services, Town of Manchester, 494 Main Street, P.O. Box 191, Manchester, CT 06045-0191. Proposals hand delivered

CITY OF KINGSTON. Ontario. By-Law Number A By-Law To Regulate Fences. By-Law Number: Date Passed: September 9, 2014

CITY OF KINGSTON Ontario By-Law Number 2003-405 A By-Law To Regulate Fences Passed: November 4, 2003 As Amended By By-Law Number: By-Law Number: Date Passed: 2014-140 September 9, 2014 (Office Consolidation)

NM, NMS. Close Coupled Centrifugal Pumps with flanged connections. Construction. Applications. Operating conditions. Motor

lose oupled entrifugal Pumps The electropumps,, S, S series comply with the Regulation no. 7/ in force starting from.. European Materials omponents, S, S Pump casing ast iron ronze Lantern bracket asing

Efficient-Tec International LLC.

Efficient-Tec International LLC. Walkway Handrail Stairway Handrail Illuminated Handrail Wire Rope Infills Rod Infills Glass Infills Spiral Staircases Glass Canopies Efficient-Tec International LLC. This

THE CORPORATION OF THE CITY OF PORT COQUITLAM BYLAW NO CONSOLIDATED FOR CONVENIENCE ONLY

THE CORPORATION OF THE CITY OF PORT COQUITLAM BYLAW NO. CONSOLIDATED FOR CONVENIENCE ONLY A Bylaw to provide for the connection of sanitary sewers and storm drains from buildings and structures to the

DAS Series Submersible Waste Water and Sewage Pumps

art DAS Series Submersible Waste Water and Sewage s ALICATIONS: ing of domestic and industrial sewage At sewage treatment plants ing of chemical and industrial waste water. ing of rain water All kinds

Bid Documents, Contracts and Specifications. City of Prospect Heights, Illinois

Bid Documents, Contracts and Specifications Closed Circuit Television (CCTV) of Sanitary Sewers in City for the City of Prospect Heights, Illinois Prepared by: 625 Forest Edge Drive Vernon Hills, Illinois

MAAG TM PPU gear unit for roller presses, horizontal mills and kilns

MAAG TM PPU gear unit for roller presses, horizontal mills and kilns 2 Our quality policy FLSmidth MAAG Gear is committed to creating long lasting relationships that establish us as a trustworthy, reliable

ROUNDO Section Bending Machines Type R-1 through R-21-S

ROUNDO Section Bending Machines Type R-1 through R-21-S Friläggas 1 Roundo Section Bending Machines - Largest selection on the market ROUNDO is the worlds leading manufacturer of plate and section bending

Ritmo meets all your welding needs in your jobsite

Ritmo meets all your welding needs in your jobsite A RITMO DVANTAGE RITMO WORLDWIDE Ritmo has professional distributors and resellers all over the world. Our staff is ready to assist you in English, Spanish,

343 Accessories for milling. 357 Carbide milling cutters Sets. 361 Gravers, solid carbide metal. 369 Deburring knife. Chipping tools Overview

. Chipping tools Chipping tools Overview Accessories for milling Miniature carbide milling cutters/finishers 9 Carbide milling cutters, shank Ø, mm Milling cutters for processing aluminium Engraver s milling

Single Pole Cam-Type Connectors

UL/CSA 1691 Compliant Single Pole Cam-Type Connectors For applications up to 400A, 600V AC or DC Color-coded insulating sleeves for easy phase identification High conductivity positive, vibration-proof

Base for Stable Mounting an Eco Pedestal

Eco Air Meter Stand With Inspection Door Before you buy your stand, make sure to ask the seller about the main post if he s using a 1/8 solid metal post instead of a 1/16 thin metal. Eco Top Light Full

M40 Size 1.5/Size 1.5i Power Connectors

M40 Size 1.5/Size 1.5i Power Connectors Approvals Tested acc. to DIN EN 61984 UL/CSA metallic connectors Number of ways: Contact diameter: Nominal current (VDE) / 20 C: Nominal current (UL): Nominal current

343 Accessories for milling. 357 Carbide milling cutters Sets. 361 Gravers, solid carbide metal. 369 Deburring knife. Chipping tools Overview

. Chipping tools Chipping tools Overview Accessories for milling Miniature carbide milling cutters/finishers 9 Carbide milling cutters, shank Ø, mm Milling cutters for processing aluminium Engraver s milling

DOCKET NO. D DELAWARE RIVER BASIN COMMISSION

DOCKET NO. D-2006-022-2 DELAWARE RIVER BASIN COMMISSION Teva Pharmaceuticals Groundwater Withdrawal City of Philadelphia, Philadelphia County, Pennsylvania PROCEEDINGS This docket is issued in response

Fiber Distribution Frame Splice Module Accessory Kit Installation Instructions

Fiber Distribution Frame Splice Module Accessory Kit Installation Instructions Content Page INTRODUCTION... 1 Revision History... 1 Trademark Information... 1 Related Publications... 1 1 DESCRIPTION...

Laparoscopic Reusable Trocars and Sleeves

High quality trocars and sleeves are essential during multi-puncture, minimally invasive surgical procedures. Our wide range of reusable trocars and sleeves are more economically beneficial and technologically

Round, Scalloped KFR23005 Ø 22~65 mm 1 set x 5 pcs. Square, Plain KFR ~100 mm 1 set x 7 pcs. Triangular, Plain KFR ~115 mm 1 set x 5 pcs

cutters set Pastry Cutters Set, Germany Stainless steel, rust proof. Folded base for better grip and prevents defomation. Precision cut opening. Round, Plain KFR20205 Ø 22~65 mm 1 set x 5 pcs KFR20210

VELA round suspended T5 direct/indirect

SUSPENDED LUMINAIRES VELA ROUND T5 SUSPENDED ROUND T5 DIRECT/INDIRECT Date Project Type Quantity N677-744 -0-0 -_ -_ 0_ RANGE MOUNTING DIMENSION LAMPING ELECTRICAL SHIELDING FINISH SERIES INSTALLATION

SAMPLE SERVICING AGREEMENT. THIS AGREEMENT made in duplicate this day of, 20, Between:

ROAD CONSTRUCTION AGREEMENT THIS AGREEMENT made in duplicate this day of, 20, Between: the of, Address:, Saskatchewan, S, a corporate municipality in the Province of Saskatchewan (hereinafter called the

Under-center Adjustable 27.5 (1.07) 74 (2.90) Maximum Base (exposed shown) 27.5 (1.07) 74 (2.90) Maximum Rivet. Base (concealed shown)

296 Under-center djustable Kick out feature disengages from keeper econdary catch option to prevent accidental opening Latch Base (econdary catch option shown) 27.5 working load: With 91-600 keeper: 1325

Single Pole Devices Industrial Grade Devices for Temporary and Semi-Permanent Power Distribution Applications

Commercial/Industrial Single Pole Devices Industrial Grade Devices for Temporary and Semi-Permanent Power Distribution Applications Leviton Single Pole Cam-Type Devices Leviton Single Pole Cam-Type Devices

NORTHWESTERN WATER & SEWER DISTRICT TAPPING PROCEDURES & REQUIREMENTS

NORTHWESTERN WATER & SEWER DISTRICT TAPPING PROCEDURES & REQUIREMENTS Revised March 2018 TABLE OF CONTENTS Page Northwestern Water & Sewer District- Rules & Regulations for Sanitary Sewer Taps 3-9 Wood

Step drills. And, with higher dimensional precision the drills will last considerably longer while maintaining the precise process tolerances.

STUFENBOHRER FORETS TRAPPENBOREN TRINBOR FRESE BROAS STUPŇOVITÉ WIERTŁA СТУПЕНЧАТЫЕ BURGHIE KADEMELİ STOPNIČASTI STEPENASTA LÉPSŐS PAKOPINIAI DRILLS A ÉTAGÉS ESALONADAS GRADINI STOPNIOWE ÎN FÚRÓ sac GRĄŽTAI

Catalog HY /US SERIES DESCRIPTION BODY NO. PAGE NO.

Catalog HY15-350/US Contents odies and SERIES DESCRITION ODY NO. GE NO. RKER STNDRD ODIES ND ITIES C04-... 04, Way... 04--*... 7 C04-3... 04, 3 Way... 04-3-*... 8 C08-... 08, Way... 08--*... 9 C08-3...

Commercial/Industrial. Single Pole Devices. Industrial Grade Connectors for Temporary and Semi-Permanent Power Distribution Applications

Commercial/Industrial Single Pole Devices Industrial Grade Connectors for Temporary and Semi-Permanent Power Distribution Applications Single Pole Cam-Type Devices Rhino-Hide Single Pole Cam-Type Devices

In this Ordinance, the following words and phrases have the following meanings:

Larimer County Ordinance for Wildlife Protection through Refuse Disposal SECTION 1. TITLE This Ordinance shall be titled Larimer County Ordinance for Wildlife Protection through Refuse Disposal. SECTION

CHAPTER 1465 Fences Purpose Definitions Plot plan and permit required General requirements.

CHAPTER 1465 Fences 1465.01 Purpose. 1465.02 Definitions. 1465.03 Plot plan and permit required. 1465.04 General requirements. 1465.05 Fences in residential districts. 1465.06 Fences in nonresidential

CR64. CR Series. Parts List & Kits. Parts List & Kits CR64. GRUNDFOS Commercial Industrial Service Manual

& Kits CR64 Being responsible is our foundation Thinking ahead makes it possible Innovation is the essence & Kits CR64 GRUNDFOS Commercial Industrial Service Manual CR64 & Kits Contents Spare Part Kits

November 9, Federal Energy Regulatory Commission 888 First Street, N.E. Washington, D.C Attention: Ms. Kimberly D.

November 9, 2018 Federal Energy Regulatory Commission 888 First Street, N.E. Washington, D.C. 20426 Attention: Ms. Kimberly D. Bose, Secretary Re: Colorado Interstate Gas Company, L.L.C. Docket No. CP18-94-000

HIGH PRESSURE + STAINLESS STEEL. Rotary Union Solutions HPS. Series FLOW PASSAGE OPTIONS

RESSURE + SAESS SEE Rotary Union Solutions S Series FW ASSAE S 1 3 4 6 8 12 16 Rotary Union Solutions S Contents About DS 3 What is a Rotary Union? 4 S Series verview 5 ow o rder 6 Specifi cations & perating

Earth electrodes Introduction

Earth electrodes Introduction 7 Three types of Furse earth rod are available, but the copperbonded steel cored rod is by far the most popular, due to its combination of strength, corrosion resistance and

SECTION DETENTION DOOR HARDWARE

#C1305-0l SECTION 087163 - PART 1- GENERAL 1.1 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

Klinger Manometer Serie 200

Klinger Manometer Serie 200 All stainless steel Bourdon tube pressure gauges watertight casing, dry or liquid filled execution; NS 63-100 150 200-250; Ranges included between -1 and 1.600 bar. The instruments

REVISION INFORMATION SHEET ONTARIO PROVINCIAL STANDARDS FOR ROADS AND PUBLIC WORKS

Ontario Provincial Standards Unit 301 St. Paul St., 2 nd Floor North St. Catharines, ON L2R 7R4 Telephone: 905-704-2258 Fax: 905-704-2051 REVISION INFORMATION SHEET ONTARIO PROVINCIAL STANDARDS FOR ROADS

LUCAS COUNTY SANITARY ENGINEER BUILDING SEWERS AND CONNECTIONS RULES AND REGULATIONS

LUCAS COUNTY SANITARY ENGINEER BUILDING SEWERS AND CONNECTIONS RULES AND REGULATIONS Section 1. All sewers or sewer improvements that have been constructed or sewers or sewer improvements hereinafter constructed

OCTOBER 15, Trustees Edward A. Sullivan Linda L. Baessler Andrew J. Rubin. Absent: Trustee Danae Muddiman EXCUSED

Meeting #13 DRAFT MINUTES OF THE PUBLIC HEARING TO AMEND THE CODE OF THE VILLAGE OF ATLANTIC BEACH - CHAPTER 205 - SWIMMING POOLS & HOT TUBS -CHAPTER 250-84 SWIMMING POOL AND REGULAR MEETING OF THE BOARD

DESIGN AND CONSTRUCTION OF THE I-5 SKAGIT RIVER BRIDGE REPLACEMENT. Best Value = Price + Time + More Time

DESIGN AND CONSTRUCTION OF THE I-5 SKAGIT RIVER BRIDGE REPLACEMENT RFP Highlights Two Week Procurement Project Approach Schedule Estimate Best Value = Price + Time + More Time I-5 Closure = $660,000 per

S.I. No. of 2018 PLANNING AND DEVELOPMENT (AMENDMENT) REGULATIONS 2018

S.I. No. of 2018 PLANNING AND DEVELOPMENT (AMENDMENT) REGULATIONS 2018 I, Damien English, Minister of State at the Department of Housing, Planning and Local Government, in exercise of the powers conferred

GEAR PUMPS. Displacement from 10 to 100 ccm Pressure up to 290 bar Speed from 350 to 3200 RPM

Displacement from 10 to 100 ccm Pressure up to 290 bar Speed from 350 to 3200 PM GEA PUMPS Q2 Gear Pump Catalogue Q2 TABE OF CONTENTS DESCIPTION......................................................................................................................

recool for lathes Fast and easy retrofitting to internal cooling with oil and emulsion

recool for lathes Fast and easy retrofitting to internal cooling with oil and emulsion www.rego-fix.com External flood cooling Peripheral cooling Internal cooling The differences of wet and dry machining

Formal Interpretations/ Interprétation formelle

Formal Interpretations/ Interprétation formelle This section lists questions that individuals have submitted about a particular standard. Each question has been reviewed and answered by the appropriate

Ritmo meets all your welding needs in your jobsite

Ritmo meets all your welding needs in your jobsite The information and photos in this publication are not binding and RITMO S.P.A. is free to make any alterations without prior notice. A RITMO DVANTAGE

Ritmo meets all your welding needs in your jobsite

Ritmo meets all your welding needs in your jobsite A RITMO DVANTAGE RITMO WORLDWIDE Ritmo has professional distributors and resellers all over the world. Our staff is ready to assist you in English, Spanish,

TITLE III: PROPERTY/LAND USE AND DEVELOPMENT

TITLE III: PROPERTY/LAND USE AND DEVELOPMENT CHAPTER VI. CONSTRUCTION CODES AND ENFORCEMENT SECTION I. PURPOSE. The purpose of this ordinance is to adopt by reference uniform building and related codes

A. PROTECTION OF UNDERGROUND FACILITIES A. PROTECTION OF UNDERGROUND FACILITIES

23 3360-A. PROTECTION OF UNDERGROUND FACILITIES 23 3360-A. PROTECTION OF UNDERGROUND FACILITIES 1. Definitions. As used in this section, unless the context otherwise indicates, the following terms shall

Sunnyside Valley Irrigation District

Sunnyside Valley Irrigation District 2016-2017 Pipe Materials Bid Package Sealed bids will be received until 11:00 am. September 30th, 2016 at Sunnyside Valley Irrigation District Field Office 1105 Yakima

Ejector, Series EBS push-in fitting pneumatic control, T-design with silencer

Type Ejector Ambient temperature min./max. +3 F / + F Medium temperature min./max. +3 F / + F Working pressure min./max. 44 psi / 87 psi Medium Compressed air Max. particle size 5 µm Oil content of compressed

DEPARTMENT OF PUBLIC WORKS RULES AND REGULATIONS GOVERNING COLLECTION, TRANSPORTATION AND DISPOSAL OF SOLID WASTE

DEPARTMENT OF PUBLIC WORKS RULES AND REGULATIONS GOVERNING COLLECTION, TRANSPORTATION AND DISPOSAL OF SOLID WASTE Effective date: February 2, 1982 Amended date: March 2, 2010 (to take effect April 1, 2010)

ORDINANCE FOR WILDLIFE PROTECTION THROUGH REFUSE DISPOSAL

ORDINANCE NO: 0 It, -;;t.o ~o 17 0 O o 2 ORDINANCE FOR WILDLIFE PROTECTION THROUGH REFUSE DISPOSAL BE IT ORDAINED BY THE BOARD OF COUNTY COMMISSIONERS OF LARIMER COUNTY, COLORADO: SECTION 1. TITLE This

Any person violating any provisions of such code shall be punished as provided in section of this code. (Ord. 1004)

ARTICLE 4. PLUMBING CODE 4-401. A) UNIFORM PLUMBING CODE INCORPORATED. There is hereby adopted and incorporated by reference, for the purpose of establishing rules and regulations for the practice of plumbing

Diamond and CBN tools Overview

. Diamond and CBN tools Diamond and CBN tools Overview 9 Diamond and CBN grinding points Diamond cut-off discs Diamond point DIATIP Diamond hollow drill 0 CBN grinding point sets Diamond honing tools Diamond

CC Communications Agenda Report Date Submitted: July 26, 2018 Agenda Item #: New Business - A Meeting Date Requested: August 2, 2018 To: Board of Churchill County Commissioners From: Mark Feest, General

MINUTES OF MEETING OF BOARD OF DIRECTORS February 20, 2018

MINUTES OF MEETING OF BOARD OF DIRECTORS February 20, 2018 THE STATE OF TEXAS COUNTY OF HARRIS HARRIS COUNTY MUNICIPAL UTILITY DISTRICT NO. 55 The Board of Directors (the Board ) of Harris County Municipal

Data sheet: Wilo-CronoNorm-NL 80/200-3/4

Data sheet: Wilo-CronoNorm-NL /-3/ Pump curves H/m 1 1 1 1 NPSH/m,5, 1,5 1,,5 P /kw 5 3 1 3 5 55% % 5% 7% 7% 7,9% 1 5 15 5 3 35 3 5 1 3 5 7% 7,3% 7% 7% 77,9% 7,% 7,% Ø 17 Eff. 7,9% Ø 1 Ø 19 7% Ø 19 Ø 1

BULLOCH COUNTY BOARD OF COMMISSIONERS 115 NORTH MAIN STREET STATESBORO, GEORGIA INVITATION FOR BID

BULLOCH COUNTY BOARD OF COMMISSIONERS 115 NORTH MAIN STREET STATESBORO, GEORGIA 30458 INVITATION FOR BID Sealed bids from suppliers will be received by the Bulloch County Board of Commissioners (herein

Enforcement and Compliance, International Trade Administration, Department of Commerce.

This document is scheduled to be published in the Federal Register on 06/29/2018 and available online at https://federalregister.gov/d/2018-13565, and on FDsys.gov DEPARTMENT OF COMMERCE International

CHAPTER 16. EXCAVATIONS AND ARTIFICIAL POOLS. 1. Article I. Excavations.

CHAPTER 16. EXCAVATIONS AND ARTIFICIAL POOLS. 1 Article I. Excavations. Sec. 16-1 Sec. 16-1. Sec. 16-2. Sec. 16-3. Sec. 16-4. Sec. 16-5. Sec. 16-6. Sec. 16-7. Sec. 16-8. Sec. 16-9. Sec. 16-10. Sec. 16-11.

PIPING, VALVES AND JOINTS

Piping and accessories... page 208-209 PVC Valves... page 210-213 Clamp saddle... page 213 Clapet Valve, Hose Holder Joints, Galvanised Collar... page 214 Compression connections... page 215 Pasting PVC

Innovative installation techniques for fiber drop terminals. White paper

Innovative installation techniques for fiber drop terminals White paper As fiber-to-the-premises (FTTP) deployments increase, innovative methodologies are being developed to make the installer s life easier.

PUMP. Type EVM APPLICATIONS MATERIALS TECHNICAL DATA. Washing system Water treatment plants Reverse Osmosis system Some chemical applications

PUMP Type APPLICATIONS Washing system Water treatment plants Reverse Osmosis system Some chemical applications Conditioning systems Heating systems Industrial boilers Pressure boosting for industrial systems

CITY OF HAYS INVITATION TO BID

CITY OF HAYS INVITATION TO BID PURPOSE/PROJECT OF BID: Installation of a 24 x 50 shade structure at the Bickle-Schmidt Sports Complex. BID DESCRIPTION: Bids are being accepted for the delivery and installation

An Urgent Bulletin from CSA Group

An Urgent Bulletin from CSA Group Occupational Health & Safety Products No. 114 Effective Date: June 1, 2019 Date: May 24, 2018 Apply Before December 1, 2018 Announcing: Publication of ASTM F2413-17 Standard

BUSINESS REGULATIONS JUNK DEALERS, JUNK YARDS AND PLACES FOR THE DISMANTLING OF AUTOMOBILES ORDINANCE NO. 1

BUSINESS REGULATIONS 21.000 JUNK DEALERS, JUNK YARDS AND PLACES FOR THE DISMANTLING OF AUTOMOBILES ORDINANCE NO. 1 Adopted: March 2, 1959 Effective: April 15, 1959 An Ordinance adopted for the purpose

Chapter 68 STREETS AND SIDEWALKS

Chapter 68 STREETS AND SIDEWALKS ARTICLE I Driveways 68-1. Permit required. 68-2. Application; investigation. 68-3. Curb cut specifications. 68-4. Drive apron, sidewalk and curb construction specifications.

PRECAST CONCRETE BOX CULVERT FOR NAPOLI CULVERT No. 6

MINIMUM SPECIFICATIONS FOR PRECAST CONCRETE BOX CULVERT FOR NAPOLI CULVERT No. 6 FOR CATTARAUGUS COUNTY DEPARTMENT OF PUBLIC WORKS HIGHWAY DIVISION OFFICE OF THE CLERK CATTARAUGUS COUNTY LEGISLATURE 303

(Space for sketch on back - Submit detailed plan if available)

CITY OF ANDERSON APPLICATION FOR ENCROACHMENT PERMIT MAIL TO: DEPARTMENT OF PUBLIC WORKS Engineering Department 1887 Howard Street Anderson, CA 96007 Date of Application: Commencement date: Completion

र ष ट र य प र तर रव न स

र ष ट र य प र तर रव न स NATIONAL INSTITUTE OF IMMUNOLOGY Aruna Asaf Ali Marg, New Delhi 110067 (Ph. No. 011-26171121-45 & 26717010-19) NIQ FOR Miscellaneous works in iron enclosures behind PRC at NII,

ALUMINIUM ROLLERS MADE IN ITALY

ALUMINIUM ROLLERS MADE IN ITALY Alveolar aluminium rollers, diameter 60mm to 250mm (natural or anodized). Roller manufacturing will be completely based on customer's drawings. The rollers can be supplied

CORPORATION OF THE MUNICIPALITY OF CHATHAM-KENT. By-law

CORPORATION OF THE MUNICIPALITY OF CHATHAM-KENT By-law 164-2012 being a By-Law under the Building Code Act, 1992, S.O. 1992, c. 23, respecting construction, demolition, change of use, occupancy permits,

Steel Pipes. Plastic Pipes. Seamless Pipes

Steel Pipes Plastic Pipes Seamless Pipes We, Hatboru Sanayi ve Ticaret A.S., are pleased to introduce ourselves as one of the leading producer and exporter for spiral submerged arc welded steel pipes (SSAW)

SYDNEY TO MELBOURNE RAILWAY STANDARDISATION AGREEMENT ACT. Act No. 48, 1958.

SYDNEY TO MELBOURNE RAILWAY STANDARDISATION AGREEMENT ACT. Act No. 48, 1958. An Act to approve an Agreement between the Commonwealth of Australia and the States of New South Wales and Victoria in relation

CATALOGUE PATENTED MADE IN ITALY

CATALOGUE PATENTED MADE IN ITALY EXTREMO THE PERFECT TAILPIPE Extremo is the perfect tailpipe for car muffl ers. Borne from the desire to create a product that was entirely made in Italy qualitatively

TITLE 18 WATER AND SEWERS 1 CHAPTER 1. WATER. 2. SEWERS. 3. SEWAGE. 4. CROSS CONNECTIONS, AUXILIARY INTAKES, ETC. CHAPTER 1 WATER

18-1 TITLE 18 WATER AND SEWERS 1 CHAPTER 1. WATER. 2. SEWERS. 3. SEWAGE. 4. CROSS CONNECTIONS, AUXILIARY INTAKES, ETC. CHAPTER 1 WATER SECTION 18-101. Application and scope. 18-102. Definitions. 18-103.

BILL ORDINANCE 10003

BILL 10136 ORDINANCE 10003 AN ORDINANCE AMENDING THE KIRKWOOD CODE OF ORDINANCES, CHAPTER 5, SECTION 5-6 AND ADOPTING THE 2009 INTERNATIONAL PLUMBING CODE, WITH MODIFICATIONS, AS THE PLUMBING CODE OF THE

TECHNOLOGY FOR THE WELDER S WORLD. MIG/MAG CATALOG 4.1. MIG/MAG Welding Technology for all Metalworking Industries.

TECHNOLOGY FOR THE WELDER S WORLD. MIG/MAG CATALOG 4.1 MIG/MAG Welding Technology for all Metalworking Industries. www.binzel-abicor.com Index MIG/MAG welding torches (wear parts system MB) MB EVO PRO

INDIAN INSTITUTE OF TECHNOLOGY DHARWAD

INDIAN INSTITUTE OF TECHNOLOGY DHARWAD TENDER DOCUMENT FOR SUPPLY & INSTALLATION OF TABLE-TOP/BENCH MOUNTED UNIVERSAL TESTING MACHINE 100 KN Capacity Tender No. IITDh/GA/SOM-UTM/12/2017-2018 1 Tender Notice

This Agreement is made as of the day of,

[3] EXHIBIT A SEWER TRANSMISSION AGREEMENT 1994, by and among: This Agreement is made as of the day of, The Borough of Alburtis, a municipal corporation organized and existing as a borough and political