B/54. Ergonomically designed handle. Motor with highperformance. Bajonet-snap buckle for blade cover

Transcription

1 Ergonomically designed handle Motor with highperformance gear box Bajonet-snap buckle for blade cover Solid base plate Automatically retracting blade guard Cut indicator Continuously adjustable mitres up to 45 (with 5 locking positions) Lateral rip fence for straight cuts B/54

2 ALFRA Rotaspeed Metal Cutting Saw RS RS 230 Hand operated The ideal machine for worksite and workshop, for almost burr-free cutting without cooling. For fast and clean cuts in pipes, threaded rods, profiles, wire ducts, corrugated and trapezoidal sheets, sandwich panels, dry mortarless construction profiles and many more. Advantages at a glance: n 1700 Watt high-performance motor for exact cuts without coolant. n Fast and easy change of saw blade. n Continuously adjustable cutting depth to 67 mm at RS 200 and 82 mm at RS 230. n The base blade is adjustable for mitre cuts up to 45. n Chip collector. n The ideal machine for site assembly companies, facade builders, repair shops, locksmitheries, rack builders, roofers, booth builders, welding shops, plumbing and heating contractors. n Ideally applicable, where angle grinders aren t strong enough or clean enough. n Ideal for weld preparation by mitre cutting. B ALFRA RotaSpeed RS 200 Saw blade diameter: 200 mm (8 ) Saw blade arbor: 30/25.4/20 mm Power: 1700 Watts Speed, rpm: 3700 Mitre: 0-45 Cutting capacity mm 0 : 67 Cutting capacity mm 45 : 42 Max. material thickness (depending on material): 6 mm Voltage: /60 Hz Weight: 6.3 kg Prod.-No. Alfra RotaSpeed RS ALFRA RotaSpeed RS 230 Saw blade diameter: 230 (9 ) Saw blade tool holder: 30/25.4/20 mm Power: 1700 Watts Speed, rpm: 2600 Mitre: 0-45 Cutting capacity mm 0 : 82 Cutting capacity mm 45 : 56 Max. material thickness (depending on material): 6-8 mm Voltage: /60 Hz Weight: 7.1 kg Prod.-No. Alfra RotaSpeed RS Scope of Supply: Machine with 2 TCT Saw Blades (premium quality), Operation Manual, Rip Fence, Set of Tools, Distance sleeve for Saw Blade Arbor, in cardboard box. We reserve the right to make technical changes. B/55

3 ALFRA Circular Saw Blades RotaSpeed ALFRA-RotaSpeed TCT Circular Saw Blades. Made in Germany n Tungsten carbide tipped, suitable for metal cutting saws from: ALFRA, Flex, Euroboor, Evolution, Hitech, Jepson, Metallkraft, Ridgid, etc. n These special TCT circular saws ensure fast and clean cuts in pipes, threaded rods, profiles, corrugated and trapezoidal sheets, wire ducts, sandwich panels, dry mortarless construction profiles, fastening profiles (DIN rails), grates using dry cutting method. n For use on metals, CrNi steel*, aluminium. n High cutting performance and tool life. The excellent price/performance ratio makes these saws highly economical. n The corresponding manufacturer's machine guidelines and notes on use must be observed when using these saw blades. Premium Quality Cutting Ø mm Application Dimensions mm No. of teeth Prod.-No. 180/7 Steel* 180 x /7 Aluminium 180 x /8 Steel* 200 x /8 Aluminium 200 x /8 for trapezoidal sheets 200 x /9 Steel* 230 x /9 Aluminium 230 x /9 for trapezoidal sheets 230 x * With stainless steel, the tool life will be lower in relation to the material thickness. Packaging unit = 1 piece Prod.-No Magnetic Chip Remover In a stainless steel round rod, you can move a magnet back and forth. The strong magnet picks up metal chips pull a knob and the chips fall off. For more cleanliness in the work place. Prod.-No. ALFRA Magnetic Chip Remover, Length 400 mm B/56

4 ALFRA RotaDry Drycutter 355 Arguments which are convincing in quality, performance and pricing: n For almost burr-free cutting of profiles and pipes out of steel, iron, copper, brass, aluminium, plastics, composites and stainless steel without cooling. n Application e.g. in steel construction, cabinet making, interior fittings etc. n With depth fence for accurate cutting n Angle and parallel stopper for mitre cuts up to 45 n With a removable chip collecting sump n With arbor adjustment for changing the saw blades n Easy to transport ALFRA RotaDry 355 Saw blade diameter 355 mm Motor 230 V/50 Hz Input 2200 W Speed 1300 rpm Cutting capacity mm wall thickness 180 x 105 mm Cutting capacity mm wall thickness 120 x 120 mm Cutting capacity mm wall thickness 135 mm Cutting capacity mm wall thickness 110 x 100 mm Cutting capacity mm wall thickness 100 x 100 mm Cutting capacity mm wall thickness 105 mm Weight 23 kg Prod.-No. Alfra RotaDry 355, with 1 TCT Saw Blade 72 T (teeth) Spare TCT Circular Saw Blades also suitable for cutting-off machines, such as: Jepson/Global/Ridgid/Ryobi Prod.-No The universal TCT saw blade for fast cutting of: steel copper aluminium profiles cable sheet metal solid material n without coolant n Regrindable n Low noise due to laser ornaments Deliverable dimensions Steel Stainless steel* Prod.-No. 305 x 2.2 x T x 2.2 x T x 2.6 x T x 2.6 x T x 2.6 x T x 2.6 x T coated Other tooth counts upon request. * With stainless steel, the tool life will be lower in relation to the material thickness. 355 x 2.6 x T coated B/57

5 RBX 120 HV RBX 180 HV B/58

6 Portable Band Saw Machines for Professionals There is a variety of portable band saw machines, but only a few of them are suitable for industrial applications or at a construction site. Pricing is usually being more important than reliability and durability. Our new machines have an excellent price-performance-ratio and are setting new standards. The robust and compact design makes it ideal for handling in the machine shop or the construction site. Ideally qualified for locksmiths, plumbing, metal-, heating-, pipeline- and mechanical workshops. Also for construction companies, public utilities with or without mobile workshops, power stations, schools, technical learning and teaching facilities. Special Features: Portable Mobile Change from horizontal or vertical cutting within seconds. With help of the vertical section notches or contours can be cut out easily from radius 85 mm on. For vertical section 0-45 stepless Very fast band saw blade-change, as the change is on the front side Cutting pressure adjustment in 4 steps, matched to the material cross section Safe material clamping due to quick-vice application Robust high-performance single-phase-motor 4-fold ball bearings-blade guide RBX 120 HV 8-fold ball bearings-blade guide RBX 180 HV Adjustable ball bearings-blade guide for angular cutting B/59

7 ALFRA Band Saw Machine RBX 120 HV Carry handle Band saw clamp 4-fold ball bearings-blade guide Twist free sawing frame precision milled Drive wheel gummed Handle Automatic OFF-switch Quick vice 45 to 90 Transportation wheels B/60

8 ALFRA Band Saw Machine RBX 120 HV Our portable Band Saw Machine RBX 120 HV cuts reliably gas pipes and conduits as well as thin walled pipes made of stainless steel, construction steel, aluminium and PVC. Furthermore it s particularly suitable for cutting flat and profiled materials. 90 Ø 120 mm; 4-3/4 105 mm; 4-1/8 l 60 mm; 3-3/8 45 Ø 50 mm; 2 50 mm; 2 Technical Data: Induction motor, capacity 400 Watts Power 230 V Cutting speed 40.5 m/min Hz 49.0 m/min Hz Feed Automatic Cutting pressure adjustment: 4 steps Mitre 0-45 Band saw measurements 1430 x 13 x 0.65 mm; 56-1/3 x 1/2 x Ø 120 mm; 4-3/4 105 mm; 4-1/8 l 60 mm; 3-3/8 45 Ø 50 mm; 2 50 mm; 2 ED: 40 % Sound level 75 db(a) (during no-load operation) Unit size (mm) length 780, width 340, high 335 Weight: 35 kg; 77 lbs Standard Accessories: Portable Band Saw Machine RBX 120 HV 230 V (110 V on demand) HSS Bi-Metal Band saw blade Operator protection plug Tool kit Operation manual Prod.-No. Band Saw Machine RBX 120 HV Special Accessories Enlarged saw table 150 x 100 mm; 6 x 3-15/ Replacement Band Saw Blades HSS-Bi-Metal 1430 x 13 x 0.65 mm; 56-1/3 x 1/2 x HSS Bi-Metal 10 tpi IPU = 10 pcs HSS Bi-Metal 14 tpi IPU = 10 pcs HSS Bi-Metal 6/10 tpi IPU = 10 pcs HSS Bi-Metal 8/12 tpi IPU = 10 pcs HSS Bi-Metal 10/14 tpi IPU = 10 pcs B/61

9 ALFRA Band Saw Machine RBX 180 HV Band saw clamp 8-fold ball bearings-blade guide, adjustable Twist free sawing frame precision milled Drive wheel gummed Cleaning brush for self-cleaning the blade High-performance single-phasemotor Blade adjustment possibility for work on small items Automatic OFF-switch Transportation wheels Optional: Chain vice for pipes and profiles (90 only) B/62

10 ALFRA Band Saw Machine RBX 180 HV Our Band Saw Machine RBX 180 HV features all technical advantages of the small one but with extended capacity: 90 Ø 180 mm, mm; 6 45 Ø 80 mm, 3-5/32 80 mm, 3-5/32 The standard quick-clamping flat vice can be changed into a chain vice within seconds. Therefore big diameter tubes can be clamped tightly and machined. Chain vice (optional) Technical Data: Induction motor, capacity 380 Watts Power 230 V Cutting speed 40.5 m/min Hz 49.0 m/min Hz Feed Automatic Cutting pressure adjustment 4 steps Mitre 0-45 with quick clamp flat vice; 90 with chain vice Band saw measurements: 1625 x 13 x 0, 65 mm; 64 x 1/2 x Ø 180 mm, mm; 6 45 Ø 80 mm, 3-5/32 80 mm, 3-5/32 ED: 40 % Sound level 75 db(a) (during no-load operation) Unit size (mm) length 865, width 335, high 415 Weight 41 kg, 90 lbs with chain vice; 46 kg, 101 lbs with quick clamp flat vice Cutting pressure adjustable Standard Accessories: Portable Band Saw Machine RBX 180 HV 230 V (110 V on demand) Quick clamp flat vice 2 pieces HSS Bi-Metal Band saw blades (one saw blade is stored safely inside protection cover) Operator protection plug Tool kit Operation manual Prod.-No. Band Saw Machine RBX 180 HV Chain vice Special accessories Enlarged saw table 150 x 100 mm; 6 x 3-15/ Replacement Band Saw Blades HSS-Bi-Metal 1625 x 13 x 0.65 mm; 64 x 1/2 x HSS Bi-Metal 10 tpi IPU = 10 pcs HSS Bi-Metal 14 tpi IPU = 10 pcs HSS Bi-Metal 6/10 tpi IPU = 10 pcs HSS Bi-Metal 8/12 tpi IPU = 10 pcs HSS Bi-Metal 10/14 tpi IPU = 10 pcs B/63

11 ALFRA RBX Band Saw Machines in Action Enlarged saw table Automatic OFF Switch RBX 120 HV HV Mitre Saw up to 45 RBX 120 HV HV Vertical cutting, here with extended support surface, RBX 120 HV HV Cleaning brush RBX 180 HV Quick vice RBX 180 HV Change from quick vice to chain vice within seconds RBX 180 HV Changeable chain vice in action RBX 180 HV Clamped pipe in chain vice RBX 180 HV B/64

12

13 ALFRA HSS-Bi- Features: M42 High concentricity With solid base plate, thus more threads and higher stability as well as concentric running exactness. For material from 2 mm with positive chipping and cutting angles as well as combi-toothing 4/6 tpi. This variable spacing provides a more even cut, for a minor generation of vibrations and heat. Lower expenditure of energy when cutting. Cutting Depth: 38 mm (1 1/2. Lateral slots help to remove the core. Suitable for unalloyed steel (up to 700 N/mm2), nonferrous metals, light metals, plastics, gypsum, pulp wood- and plywood boards, lightweight building boards and general wood processing. Drill bit exchangeable with other commercially available arbors. B/104

14 Metal Hole Saws XXWith Cobalt-alloyed teeth (M42) Also steel/stainless steel up to approx. 3 mm, can be worked easily (for frequent use, we recommend our TCT Hole Saws). tailored to work on softwoods. B/105

15 ALFRA HSS-Bi-Metal Hole Saws ALFRA HSS-Bi-Metal Hole Saws are applicable in portable and pillar drilling machines. When using pillar drilling machines, use manual feed only. Features: n M42 n High concentricity. n With solid base plate, thus more threads and higher stability as well as concentric running exactness. n With positive chipping and cutting angles as well as combi-toothing 4/6 tpi. This variable spacing provides a more even cut, for a minor generation of vibrations and heat. Lower expenditure of energy when cutting. n Cutting Depth: 38 mm (1 1/2. n Lateral slots help to remove the core. n Suitable for unalloyed steel (up to 700 N/mm2), nonferrous metals, light metals, plastics, gypsum, pulp wood- and plywood boards, lightweight building boards and general wood processing. n Drill bit exchangeable with other commercially available arbors. Tip: Start drilling operation with light pressure. Continue with light and steady pressure, avoid pendulum motion, follow the speed chart, use coolant. When cutting wood or wood substitutes, remove drill dust in time. Combi toothing 4/6 tpi Saw-Ø mm Inch Prod.-No / / / / / / / / / / / / / / / / / / / Ø from 14.0 to 210 mm available / / / / / / / / / / / / / / B/106

16 ALFRA HSS-Bi-Metal Hole Saws Saw-Ø mm Inch Prod.-No. 9.5 mm 3 / / / / / / / / / / Prod.-No Prod.-No A6-SS A6-SDS / / / / mm 3 / / From Ø mm only suitable for wood and wood substitutes / / / Prod.-No Prod.-No A2-SS A2-SDS mm 7 / 16 Prod.-No A3-SS Prod.-No with bi-metal hole saw Ø 68 mm + A2-SS Arbors with guiding drill bit Saw-Ø mm Saw-Ø inch Type Shank-Ø Prod-No / / 16 A 6-SS 9.5 hexagon / / 16 A 6-SDS SDS / 4-6 A 2-SS 9.5 hexagon / 4-6 A 2-SDS SDS / / 16 A 3-SS hexagon / / 16 A 5-SS 16.0 hexagon Accessories: Prod.-No mm 3 / 8 Diverse applications mm 7 / 16 Rim countersink for Ø 68 mm (with TCT-teeth) Prod.-No Extension shaft 300 mm x 9.5 mm for A 6-SS + A 2-SS, A3-SS Spare Center Drill HSS Ø 6,35 mm x 80 mm for A 6-SS + A 6-SDS + A 2-SS + A 2-SDS + A 3-SS + A 5-SS Prod.-No Ejector Spring Important: Disable impact drill when using SDS-shanks! Prod.-No B/107

17 ALFRA HSS-Bi-Metal Hole Saws - Sets The following HSS-Bi-Metal Hole Saw Sets enlarge our range. These sets were especially compiled for electricians, mechanics, plumbers and for general, universal applications. These sets improve the presentation. Storage in solid tool cases. Hole Saw Set Standard Contents: Ø 16 mm ( 5 / 8 Ø 19 mm ( 3 / 4 Ø 22 mm ( 7 / 8 Ø 29 mm (1 1 / 8 Ø 35 mm (1 3 / 8 Ø 44 mm (1 3 / 4 Ø 52 mm (2 1 / 16 Ø 57 mm (2 1 / 4 Ø 67 mm (2 5 / 8 Arbor A6-SS, Arbor A2-SS, Spare Twist Drill Prod.-No Prod.-No Hole Saw Set Professional Contents: Ø 16 mm ( 5 / 8 Ø 19 mm ( 3 / 4 Ø 22 mm ( 7 / 8 Ø 25 mm (1 ) Ø 29 mm (1 1 / 8 Ø 32 mm (1 1 / 4 Ø 35 mm (1 3 / 8 Ø 38 mm (1 1 / 2 Ø 44 mm (1 3 / 4 Ø 51 mm (2 ) Ø 64 mm (2 1 / 2 Ø 76 mm (3 ) Arbor A6-SS, Arbor A2-SS, Spare Twist Drill Prod.-No Prod.-No Hole Saw Set Electro Contents: Ø 22 mm ( 7 / 8 Ø 29 mm (1 1 / 8 Ø 35 mm (1 3 / 8 Ø 44 mm (1 3 / 4 Ø 51 mm (2 ) Ø 64 mm (2 1 / 2 Ø 68 mm (2 11 / 16 Arbor A6-SS, Arbor A2-SS, Spare Twist Drill Prod.-No Hole Saw Set Sanitary Contents: Ø 16 mm ( 5 / 8 Ø 19 mm ( 3 / 4 Ø 24 mm ( 15 / 16 Ø 29 mm (1 1 / 8 Ø 38 mm (1 1 / 2 Ø 44 mm (1 3 / 4 Ø 57 mm (2 1 / 4 Ø 67 mm (2 5 / 8 Arbor A6-SS, Arbor A2-SS, Spare Twist Drill Prod.-No Prod.-No Sales Display on request! B/108 Prod.-No

18 B/109 2/109

19 TCT-Hole Saws in use TCT-Hole Saws short-/long type Stainless steel Plastic TCT-Hole Saws FRP type Poroton stone B/110

20 TCT-Hole Saws MBS type Sanitary pipes type SML Checker plate (VA) MBS Pro Use on Rotabest Magnetic Drilling Machine with MT3 Arbor Prod.-No.: Sanitary pipes type SML B/111

21 ALFRA TCT-Hole Saws Short Type Made in Germany by ALFRA Ø mm ^= 10.0 mm shank (Ø 9 / 16-2 ^= 3 / 8 shank) Ø mm ^= 13.0 mm shank (Ø 2-6 ^= 1 / 2 shank) stainless steel Basic body Clamping screw 4 mm ( 3 / mm ( 7 / 16 Ejector Spring Tapered center drill with pre- and post-cutter Centering without running off (center punching not necessary) The application area of TCT Hole Saws differs from HSS-Bi-Metal Hole Saws. With ALFRA TCT Hole Saws, suitable to economically process stainless steel up to 2 mm (1/16 ), unalloyed steels up to 4 mm (3/16 ), plastics, PVC, aluminium, zinc, gypsum plaster boards and lightweight building boards, as well as asbestos. Do not use automatic feed, when working with pillar drilling machines. For the use on portable- and pillar drilling machines.do not use automatic feed, when working with pillar drilling machines. Features: n High concentric running exactness through solid construction. n CAD-optimized cutting angles with specially ground section ensures high cutting capacity and long tool life. n Quick removal of drilled core through ejector spring for all hole saws up to 150 mm (5 29/32 ) Ø. n Carbide tipping enables repeated re-grinding. n ALFRA hole saws are repairable. In the event of a tooth breaking, it can easily be replaced and resharpened. n Exchangeable center pin. n Use of MT tool holders from Ø 31 mm (1 7/32 ). n For use on hand drilling machines (recommended up to max. Ø 40 mm; 1 9/16 ) or stationary machines. Tips: n At thicker materials: cut 2-3 mm per cutting process, remove chips afterwards. n When cutting metals, a high- grade cutting oil should be used. Exception: Do not use cutting oil when using cast iron, use parrafin instead of oil when cutting aluminium. n Keep in mind: Always wear safety goggles. Another special technical feature: From Ø 15.2 mm (3/16 to 30.0 mm (1 1/8, the hole saw is made of one piece. From Ø 31.0 mm (1 3/16 ) we use specially hardened tool holders to compensate for the torsional power in case of heavy operation, which avoids early shearing off of the tool holder shank. In terms of construction not comparable with any other make. B/112

22 ALFRA TCT-Hole Saws Short Type Made in Germany by ALFRA Ø Ø No. of Prod.-No. mm Inch teeth mm Inch Ø Ø / Ø Ø / Ø Ø / Ø Ø Ø / Ø Ø Ø / Ø / Ø Ø Ø / Ø Ø Ø / Ø / Ø Ø / Ø Ø / Ø / Ø Ø / Ø Ø / Ø / Ø Ø / Ø / Ø Ø / Ø Ø / Ø / Ø Ø / Ø Ø Ø / Ø / Ø Ø / Ø / Ø Ø / Ø / Ø Ø / Ø Ø / Ø Ø / Ø / Ø Ø / Ø / Ø Ø / Ø / Ø / Ø Ø Ø Ø No. of Prod.-No. mm Inch teeth mm Inch Ø Ø / Ø / Ø Ø / Ø Ø / Ø / Ø Ø / Ø / Ø Ø / Ø / Ø Ø / Ø Ø / Ø / Ø Ø / Ø / Ø Ø / Ø Ø Ø / Ø Ø Ø Ø Ø / Ø Ø HSS-Spare Drill with tapered center tip from Ø Ø 6x50 mm from Ø Ø 8x50 mm (old design) MT Arbors MT-2 (Ø mm) MT-3 (Ø ,0 mm) SDS Arbor SDS arbor shank (for use with Ø mm) 060sds6 Spare Ejector from Ø Ø 6 mm Coolant ALFRA ALFRA BIO 2000 For mild steel St 37, 405 ml ALFRA 3000 For stainless steel, 520 ml Prod.-No Set Metric Prod.-No. Set Metric Contents: 1 each of Ø 16/20/25/32/40 mm 2 Allen Keys Prod. No /21030 B/113

23 ALFRA TCT-Hole Saws Long Type Made in Germany by ALFRA Ø mm ^= 10.0 mm shank (Ø 25 / / 16 ^= 3 / 8 shank) Ø mm ^= 13.0 mm shank (Ø 2-4 ^= 1 / 2 shank) stainless steel Ø mm ^= 35.0 mm (Ø 25 / / 16 ^= 1 3 / 8 Ø mm ^= 60.0 mm (Ø 2 3 / 8-4 ^= 2 3 / 8 4 mm ( 3 / 16 Tapered center drill with pre- and post-cutter Centering without running off (center punching not necessary) Features: n Especially developed for the use on pipes, vaulted materials, for unalloyed and alloyed steels, nonferrous metals, plastics as well as glass fibre reinforced plastic. n For material thickness up to 4 mm (3/16 ), 2 mm (1/16 ) stainless steel. n For use on hand drilling machines, recommended up to max. Ø 40 mm (1 9/16 ) or stationary machines. Tips: n Start drilling operation with light pressure, when drilling pipes. Avoid pendulum motions. n Keep in mind: Always wear safety goggles. Special tool for insulant Special tools for special applications on request! Special tool for Macrolon B/114

24 ALFRA TCT-Hole Saws Long Type Made in Germany by ALFRA Ø Ø No. of Prod.-No. mm Inch teeth mm Inch Ø Ø No. of Prod.-No. mm Inch teeth mm Inch Ø Ø No. of Prod.-No. mm Inch teeth mm Inch Ø Ø 20.4 Ø /16" Ø Ø 22.5 Ø /8" Ø /16" Ø Ø " Ø /16" Ø Ø 28.3 Ø /8" Ø /16" Ø Ø /4" Ø Ø /16" Ø /8" Ø Ø /16" Ø Ø /2" Ø /16" Ø Ø /8" Ø /16" Ø Ø /4" Ø Ø /16" Ø /8" Ø Ø /16" Ø " Ø Ø /16" Ø /8" Ø Ø /16" Ø /4" Ø Ø /16" Ø /8" Ø Ø /16" Ø Ø /2" Ø Ø /16" Ø /8" Ø Ø /16" Ø /4" Ø Ø /16" Ø /8" Ø /16" Ø Ø " Ø Ø /16" Ø /8" Ø Ø /16" Ø Ø /4" Ø /16" Ø Ø /8" Ø /16" Ø Ø /2" Ø /16" Ø Ø /8" Ø Ø /16" Ø /4" Ø Ø /16" Ø /8" Ø Ø /16" Ø " HSS-Spare Drill with tapered center tip von Ø Ø 6x80 mm von Ø Ø 8x100 mm MT Arbors MT-2 (ab Ø 31,0) MT-3 (ab Ø 31,0) SDS Arbor SDS arbor shank (for use with Ø mm) 060sds6 Highly recommendet accessories coolant and lubricant! ALFRA BIO 2000 is a fully synthetic cutting oil, developed for high-quality cutting, threading and drilling of metals of any degree of hardness, ferrous metal, steel alloys, stainless steel, copper, aluminium and their alloys. ALFRA BIO 2000 is free of hydrocarbon, sulphur and chlorine. ALFRA 3000 Universal metal working oil free of chlorine. High-performance drilling, broaching and cutting fluid, petroleumbased, for moderately difficult and difficult to cut steels. With a high proportion of active ingredients to ensure optimum cutting performance and significantly reduced tool wear. It meets occupational health and safety requirements. We recommend to use ALFRA 3000 especially for the drilling and threading of high-alloy steel and chrome nickel steel. Aerosol can 405 ml Aerosol can 520 ml B/115

25 ALFRA TCT-Hole Saws MBS-Light The TCT Multirange Hole Saw Registered Utility Model No Ø mm = 10.0 mm shank (Ø 11 / / 8 = 3 / 8 shank) Ø mm = 13.0 mm shank (Ø 1 7 / / 16 = 1 / 2 shank) Recommendation: Use exchangeable Morse Taper arbor MT2 or MT3 from Ø 37.0 mm (1 7/16 ) for stability reasons. stainless steel Basic body Clamping screw 16 mm ( 5 / 8 10 mm ( 3 / 8 Ejector Spring Tapered center drill with pre- and post-cutter Centering without running off (center punching not necessary) This TCT Hole Saw is a multi-range Hole Saw for the universal use up to a material thickness of max. 10 mm (3/8 ) (without ejector spring). Through its solid construction and an enhanced cutting geometry (Registered Utility Model No ), an improved cutting behaviour combined with a high cutting capacity and tool life, is achieved. Cutting geometries Variable teeth, less Vibration, longer tool life, smoother cutting. MBS for almost limitless use For the use on flat steel, as well as on pipes and vaulted materials. Cutting of overlapping holes is possible. For use on stationary and hand drilling machines (recommended up to max. Ø 40 mm; 1 9/16 ). n Portable drilling Machines: up to 4 mm (1/8 ) material thickness n Stationary drilling Machines: up to 10 mm (3/8 ) material thickness (for material thickness over 6 mm (15/64 ), it is necessary to settle and empty the chips several times). In case of heavy operation, we recommend Morse Taper Tool Holders, which are suitable from Ø 37 mm (1 7/166 ). Advantage: All MBS-Light type TCT Hole Saws are equipped with an ejector spring. The cut material is self-ejecting. The cut material is self-ejecting. Chip space between workpiece and tool Center drill Clamping screw Another special technical feature: From Ø 37 mm (1 7/16 ), specially hardened tool holders are used to compensate for the torsional power in case of heavy operation which avoids early shearing off of the tool holder shank. In terms of construction not comparable with any other make. Chip guideline TCT-teeth B/116

26 ALFRA TCT-Hole Saws MBS-Light The TCT Multirange Hole Saw Registered Utility Model No Ø Ø No. of Prod.-No. mm Inch teeth mm Inch Ø / Ø 18.6 Ø / Ø Ø 20.4 Ø / Ø Ø 22.5 Ø / Ø / Ø Ø Ø / Ø Ø 28.3 Ø / Ø / Ø Ø / Ø Ø / Ø / Ø From Ø 37.0 mm (1 7/16 ) we recommend the use of MT arbors Ø / Ø Ø / Ø / Ø Ø / Ø / Ø Ø / Ø Ø / Ø / Ø Ø / Ø Ø Ø / Ø / Ø Ø / Ø / Ø Ø / Ø / Ø Ø / Ø Ø / Ø Ø / Ø / Ø Ø / Ø / Ø Ø / Ø / Ø / Ø Ø Ø Ø Ø No. of Prod.-No. mm Inch teeth mm Inch Ø / Ø / Ø Ø / Ø Ø / Ø / Ø Ø / Ø / Ø Ø / Ø / Ø Ø / Ø Ø / Ø / Ø Ø / Ø / Ø Ø / Ø HSS-Spare Drill with tapered center tip from Ø Ø 6x50 mm from Ø Ø 8x50 mm (old design) MT Arbors MT-2 (from Ø 37.0 mm) MT-3 (from Ø 37.0 mm) Weldon adaptor from Ø mm 060WD (inc. ejector pin Prod. No ) Spare Ejector For tapered center drill from Ø mm Ø 6 mm from Ø mm Ø 8 mm Drilling structured sheet metals Drilling rectangular tubes Drilling flat steels Drilling tubes B/117

27 ALFRA TCT-Hole Saws MBS-Pro The TCT Multi-Range Hole Saw Made in Germany by ALFRA Ø mm = 13.0 mm shank Ø 11 / / 16 = 33 / 64 shank Recommendation: Use exchangeable Morse Taper arbor MT2, MT3 or 13 mm straight shank from Ø 31 mm (1 7/32 ) for stability reasons. Clamping screw Basic body 20 mm ( 25 / mm (1 3 / 16 Ejector Spring Tapered center drill with pre- and post-cutter Centering without running off (center punching not necessary) Cutting geometries Variable teeth, less Vibration, longer tool life, smoother cutting. MBS-Multirange Hole Saws for universal use. Max. cutting depth 20 mm ( 25 / 32 ) Suitable for flat materials but also for pipes and curved surfaces. Cutting of overlapping holes is possible. CAD optimized precision tools with high cutting performance and durability. MBS for almost limitless use e.g., on Rotabest Magnetic Drilling Machine (with MT2 or MT3 arbors) and Weldon adaptor Prod.-No. 060WD on Machines with Weldon Shank. For use on stationary and portable drilling machines (recommended up to max. Ø 40 mm; 1 9/16 ) n Portable drilling Machines: up to 6 mm (15/64 ) material thickness n Stationary drilling Machines: up to 20 mm (25/32 ) material thickness at cutting depths from 6 mm (15/64 ) we recommend clearing the chips. MBS hole saws can be resharpened, and it is possible to replace broken out teeth depending on the condition of the hole saw. Advantages: All Alfra TCT Hole Saws MBS-Pro type are equipped with an ejector spring. The cut material is self-ejecting. The cut material is self-ejecting. Another special technical feature: From Ø 31 mm (1 7/32 ), we use specially hardened tool holders to compensate for the torsional power in case of heavy operation, which avoids early shearing off of the tool holder shank. In terms of construction not comparable with any other make. B/118

28 ALFRA TCT-Hole Saws MBS-Pro The TCT Multi-Range Hole Saw Made in Germany by ALFRA Ø Ø No. of Prod.-No. mm Inch teeth mm Inch Ø /16" Ø 18.6 Ø /4" Ø Ø 20.4 Ø /16" Ø Ø 22.5 Ø /8" Ø /16" Ø Ø " Ø /16" Ø Ø 28.3 Ø /8" Ø /16" As from Ø 31.0 mm (1 7/32 we recommend the use of MT arbors Ø Ø /4" Ø Ø /16" Ø /8" Ø Ø /16" Ø Ø /2" Ø /16" Ø Ø /8" Ø /16" Ø Ø /4" Ø Ø /16" Ø /8" Ø Ø /16" Ø " Ø Ø /16" Ø /8" Ø Ø /16" Ø /4" Ø Ø /16" Ø /8" Ø Ø /16" Ø Ø /2" Ø Ø /16" Ø /8" Ø Ø /16" Ø /4" Ø Ø /16" Ø /8" Ø /16" Ø Ø Ø No. of Prod.-No. mm Inch teeth mm Inch For drilling stainless steel from Ø 76.0 mm we recommend using Rotabest AL cutters (Prod.-No ) Ø " Ø Ø /16" Ø /8" Ø Ø /16" Ø Ø /4" Ø /16" Ø Ø /8" Ø /16" Ø Ø /2" Ø /16" Ø Ø /8" Ø Ø /16" Ø /4" Ø Ø /16" Ø /8" Ø Ø /16" Ø " HSS-Spare Drill with tapered center tip from Ø Ø 6x80 mm from Ø Ø 8x80 mm (old design) MT Arbors MT-2 (Ø mm) MT-3 (Ø mm) Weldon adaptor from Ø mm 060WD (incl. ejector pin Prod. No ) Spare Ejector For tapered center drill from Ø Ø 6 mm suitable for spare drill Ø 6 mm Drilling structured sheet metals Drilling tubes Drilling flat steels Free-hand drilling up to Ø 30 mm B/119

29 ALFRA TCT-Hole Saws FRP type The TCT Multi-Range Hole Saw Made in Germany by ALFRA Rim Countersink Basic body Center Drill Arbors SW 12 or SDS Prod.-No FRP Ø 68 mm with tool holder and rim countersink Cutting depth 60 mm (2 3/8 ) n Specially designed for wood, plain, laminated and coated chip board, plywood, paper-base laminate, PVC, glass fibre reinforced plastic, gas concrete, Ytong stone, plasterboard, hollow gauged brick/stones. n No blocking due to optimal cutting geometry. n Simple drill core removal based on new chip space design. n In the event of a tooth breaking, it can easily be replaced and resharpened. n Only use when rotating, switch off hammer action. n Ideal for electricians, plumbers and heating engineers, carpenters and cabinet makers, stair construction and kitchen furniture fitters. ALFRA TCT-Hole Saws FRP Multi-Tooth Perfect assembly of sockets in e.g. wood, gypsum plaster board,... up to from Ø 50.0 mm: 10.0 mm shank Ø 51.0 mm: 13.0 mm shank 35.0 mm to Ø mm from Ø 60.0 with arbor shank n Cutting depth 35.0/60.0 for sandwich-composite material, wood and chipboard coated with insulation and sheet metal (also stainless), e.g., counters and refrigerators. Please indicate material and thickness! B/120

30 ALFRA TCT-Hole Saws FRP type The TCT Multi-Range Hole Saw Made in Germany by ALFRA Ø TCT-Hole Saws FRP Prod.-No. mm inch single drill bit, cutting depth 60 mm 25.0 Sanitary and heating pipes Sanitary and heating pipes /8 Sanitary and heating pipes Cavity wall branch box, halogen reflector lamp 40.0 Sanitary drain pipes Water and heating pipes with insulation Recessed lights Ø 55 mm Recessed lights Ø 58 mm ᅠ Recessed lights Ø 60 mm Switch box Ø 60 mm Cavity wall box Ø 65 mm Cavity wall box Ø 68 mm Cavity wall branch boxes Ø 70 mm Cavity wall branch box Ø 74 mm Junction boxes, cable gland covers, Recessed lights Ø 80 mm 85.0 Recessed lights Ø 85 mm ᅠ Recessed lights Ø 90 mm Discharge air pipes Ø TCT-Hole Saws FRP Multi-tooth Prod.-No. No series production. Delivery on request. mm with arbor, cutting depth 35/60 mm Sanitary drain pipes Water and heating pipes with insulation Switch boxes, diameter 60 mm socket drill Junction boxes, diameter mm Junction boxes Discharge air pipes Intermediate sizes and other cutting depths on request HSS spare drill for FRP Multi-tooth Ø mm = 8 x Ø mm = 8 x Rim countersink for Ø 68 mm Tool Holder wrench size Tool Holder SDS Prod.-No Spare center drill HSS 7.2 mm FRP Hole Saw Set Electrician Content: each of Ø 35/ 68/74 1 Tool Holder wrench size 12 1 HSS drill FRP Hole Saw Set Lighting Content: each of Ø 35/60/68/80/85 mm 1 Tool Holder wrench size 12 1 HSS drill Prod.-No B/121

31 ALFRA-Precision Multi-Step Drills XXSpiral grooved, each step with axial and radial relief grinding according to its diameter XXLaser-etched scale in the chip space XXSpecial drill tip enables centering and drilling even through thin-walled materials XXBurr-free drilling with no deformation of the sheet XXRegrindable XXAvailable in HSS and HSS with TiAIN coating B/122

32 Multi-Step Drills HSS DM O5 More precise hole diameter through cylindrical steps. Hole deburring through the next step. Application area: The ideal tool for sheet metal forming, for the electrical industry, HVAC or the common engineering or the switchboard industry. Suitable for all materials such as nonferrous metals, stainless steel sheets, thermoplastic and thermosetting plastics, as well as for steel sheets up to a max. material thickness of 6 mm. With the Multi-Step Drills, sheet metals can be centered, drilled and subsequently deburred in one work step. n A break of the drill tip mostly occurs through high feed forces at the start of the drilling operation. Multi-step drills with fixed drill tips are worthless then. A broken center drill in an ALFRA multi-step drill can be easily replaced. This more than compensates for the higher price. n Each stage is equipped with a radially adjusted relief grinding corresponding to its diameter. n Each stage is provided with an axial relief grinding and a relief angle on its cutting edge. n All step diameters are laser marked on the tool. Benefits of multi-step drills with keyway and 3 cutting edges: n The keyway allows the drill to make a chipping cut during drilling for better chip removal. n The special keyway geometry, arranged around the drill, makes for a longer cutting edge compared to the usual straight groove and noticeably easier cutting. n Spiral cut chip spaces guarantee an absolute running smoothness and a high cutting capacity. Tip: The tool life can be considerably prolonged by using of ALFRA Cutting Spray or ALFRA Coolant Stick. Advantages of TiAlN hard coating: n Suitable for use on very hard materials (VA). n Offers optimal tool life with the same use at the highest cutting speeds. n Very high microhardness HV 0.05 of 3200 so that the blue-black hard coating is more than 20% harder than conventional gold-yellow TIN coating. n Maximum working temperature: 800 C. Description Shank Ø Prod.-No. AMS For general machine construction, drills circular holes in metals up to 4 mm thick, through application with hand drills, indispensable on the work-site. 3 chip spaces, spiral grooved, replaceable center drill Steps Ø mm (Step 40 is for deburring) AMS TiAlN coated chip spaces, spiral grooved, replaceable center drill TiAlN coated Steps Ø mm (Step 40 is for deburring) AM Steps Ø mm PVD For the electrical industry, matched to holes for armoured conduit thread clearance holes, saves considerable time when producing borings for PG Steps Ø PG 7 - PG 9 - PG 11 - PG 13 - PG 16 - PG mm - PG mm 4 or 6 mm n Exchangeable center drills 6 4 chipspaces Prod.-No n Burr removal, Countersinking Boring Prod.-No n Prod.-No n 6 Prod.-No n 6 B/123

33 Multi-Step Drills HSS DM O5 More precise hole diameter through cylindrical steps. Hole deburring through the next step. Description Shank Ø Prod.-No. PVD-TiN-coated PVK Like PVD, but for armoured conduit thread core hole PG Steps Ø PG 7 - PG 9 - PG 11 - PG 13 - PG 16 - PG 21 SVB Pre-drill specifically for punches & dies Steps Ø DKS chip spaces, spiral grooved, replaceable center drill Clearance holes Ø Core holes Ø M12 - M16 - M20 - M25 - M32 Prod.-No n 6 Prod.-No n 6 DKS 32 TiAlN coated chip spaces, spiral grooved, replaceable center drill Clearance holes Ø Core holes Ø M12 - M16 - M20 - M25 - M32 DKS chip spaces, spiral grooved, replaceable center drill, for metric borings acc. to EN, Core - and clearance holes M 10 - M 40 Steps Ø DKS 40 TiAlN coated chip spaces, spiral grooved, replaceable center drill For metric borings acc. to EN Core - and clearance holes M 10 - M 40 Steps Ø Prod.-No Pre-drill specifically for punches & dies Prod.-No n DKI-VA chip spaces, replaceable center drill of HSS-Co 5 steel. For stainless steel to 3 mm thick Core - and clearance holes M 10 - M 40 Steps Ø Spare center drill suitable for AMS PVD PVK DKI DKS Spare center drill TiAlN suitable for AMS PVD PVK DKI DKS Prod.-No n Prod.-No n Prod.-No n Prod.-No n 6 Prod.-No Prod.-No n Replaceable center drill 6 6 With 4 chip spaces B/124

34 Multi-Step Drills HSS DM O5 More precise hole diameter through cylindrical steps. Hole deburring through the next step. Standard execution with 2 chip spaces, spiral grooved. n More precise hole diameter through cylindrical steps. n Immediate deburring through the next step n Drilling of sheet metals as thin as 4 mm possible. n Use coolant stick! n The keyway allows the drill to make a chipping cut during drilling for better chip removal. n Longer cutting edge compared to the usual straight groove and noticeably easier cutting. n Laser-etched scale in the chip space to indicate the bore diameter achieved. Description Bore range Shank Ø Length Prod.-No. AM mm x 1 mm mm AM mm x 2 mm mm AM mm x 2 mm mm Set in plastic case Contents: 1 of each Type AM-12/AM-20/AM-30 High-performance coolant stick Prod.-No Prod.-No Standard values for the use of ALFRA Multi-step drills This drill was developed to bore perfectly round and deburred holes in sheet metal from 4-6 mm thick. The transition forms a radius which serves to deburr or bevel the hole at the same time. While conical one-lip bits drill a slightly tapered hole, our ALFRA multi-step drill achieves a cylindrical hole. The tools have axial-radial relief grindings and can be lightly reground on the breast of the cutting tooth. We recommend the use of pillar drilling machines, however, the small AL- FRA Multi-step drills can be used on adjustable hand drilling machines. Sufficient cooling using ALFRA coolant stick or a bore emulsion is imperative. Speed chart rpm Type sheet steel stainless steel non-ferrous plastics St37 sheets metals (soft) AM drill countersink AM-1 drill countersink PVD+PVK+DKI drill PVD-VA + SVB countersink Prod.-No B/125

35 Precision Conical One-Lip Bits HSS DM 05 With laser-marking ALFRA Precision Conical One-Lip Bits are the ideal tools for general sheet metal working. Fields of applications include HVAC, electronic industries, engineering and panel building. To be used on non-ferrous metals, stainless steels, thermo- and duroplastic plastics, as well as on all common sheet steels up to a material thickness of max. 4 mm. With ALFRA Conical One-Lip Bits, you can center, spot drill and bore up in one work step. If treated carefully, can be reground many times. The tool life can considerably be prolonged by using ALFRA Cutting Oil or Coolant Stick. Packing: separately in plastic box with operation manual. Size Range Shank-Ø Prod.-No L * Set 1 Size Stift Coolant stick, separately Prod.-No Prod.-No Prod.-No *Special Antenna-Bit n Conical one-lip bit with cylindrical end section to drill holes for car antennas. n Burr-free, no deformation, no countersinking, dimensional accuracy n Size 6,0-22,5 mm. Prod.-No Prod.-No Precision Conical One-Lip Bit Set Prod.-No. Tin box Contents: 1 x Size 1 1 x Size 2 1 x Size 3 Prod.-No Prod.-No Prod.-No * Prod.-No B/126

36 B/127

37 Original Astroflex Sabre Saw Blades For Rockwell, Makita, Black & Decker, Bosch, Holz-Her, Atlas Copco, Rems, Roller, Milwaukee, Hilti and others. n A new range of sabre saw blades with improved cutting performance and precision ground teeth. Cobalt alloyed teeth. n The HSS-Bi-Metal blade is almost unbreakable and suitable for all materials and applications. n This sabre saw blade stands for highest quality and durability. For Metal Application Range Material thickness Steel- Length Width Thickness Teeth Milford Alfra Metal processing in mm Quality inch Prod.-No. Prod.-No. Metal processing; soft metals copper-, aluminium-, brass-cables, wires and pipes > 3 mm HSS-Bi 100 mm 16 mm 0.9 mm Metal processing; soft metals copper-, aluminium-, brass-cables, wires and pipes > 1 mm HSS-Bi 100 mm 16 mm 0.9 mm All kind of metals, stainless steel steel pipes, cast iron, alloys, etc. > 3 mm HSS-Bi 150 mm 16 mm 0.9 mm All kind of metals, stainless steel steel pipes, cast iron, alloys, etc. > 1 mm HSS-Bi 150 mm 16 mm 0.9 mm All kind of metals, stainless steel 10/14 steel pipes, cast iron, alloys, etc. 3-6 mm HSS-Bi 150 mm 16 mm 0.9 mm Combo All kind of metals, stainless steel steel pipes, cast iron, alloys, etc. > 6 mm HSS-Bi 200 mm 16 mm 0.9 mm All kind of metals, stainless steel steel pipes, cast iron, alloys, etc. > 3 mm HSS-Bi 200 mm 16 mm 0.9 mm All kind of metals, stainless steel steel pipes, cast iron, alloys, etc. > 1,15 mm HSS-Bi 200 mm 16 mm 0.9 mm All kind of metals, stainless steel 10/14 steel pipes, cast iron, alloys, etc. 3-6 mm HSS-Bi 200 mm 16 mm 0.9 mm Combo Special Sabre Saw Blade flexible type 10/14 for cast iron- and steel pipes 3-10 mm HSS-Bi 290 mm 16 mm 0.9 mm Combo For Wood Special Sabre Saw Blade for Wood with nails, especially for the refurbishing HSS-Bi 150 mm 19 mm 0.9 mm Special Sabre Saw Blade for Wood 4/6 - curved cuts - HSS-Bi 150 mm 19 mm 0.9 mm Combo Special Sabre Saw Blade for Wood - Refurbishing - HSS-Bi 210 mm 19 mm 0.9 mm Special Sabre Saw Blade for Wood - Refurbishing - HSS-Bi 290 mm 19 mm 0.9 mm B/128

38 Original Astroflex HSS-Bi-Metal Sabre Saw Blades For Rems- and Roller Sabre Sawing Machines ALFRA-Special-Sabre-Saw Blades can be used problem-free on these machines. Made of HSS-Bi-Metal, heat treated to the point. n Made of high alloy HSS-Bi-Metal n Heat treated to the point n Highest heat hardness and wear resistance n Toothing in crossed version For pipes Application range Steel quality Length Width Thickness Teeth Blade Alfra per inch No. Prod.- No. Pipes up to Ø 2 HSS-Bi-Metal 140 mm 25 mm 1.6 mm Pipes up to Ø 4 HSS-Bi-Metal 200 mm 25 mm 1.6 mm for free-hand and flush cutting For free-hand and flush cutting HSS-Bi-Metal 150 mm 25 mm 1.1 mm HSS-Bi-Metal 200 mm 25 mm 1.1 mm e. g. refurbishing, on walls and overhead HSS-Bi-Metal 300 mm 25 mm 1.1 mm Packaging unit: 5 pieces ALFRA Jigsaw Blades Suitable for pneumatic saws as e. g. SIG and Flex-sheet Metal-Tiger Saws Made of HSS Bi-Metal for burr- and distortion-free cutting of thin sheet metals and plates, as well as for pipes in ventilation and air condition constructions. Precise crossing, highest endurance. Prod.-No Prod.-No Application range Length Thickness Width Teeth Prod.-No. mm mm mm inch For sheet metals as from 1,1 mm thickness, plastic up to 3 mm, wood up to 5 mm 96 0,6 12, For sheet metals mm thickness For sheet metals up to 0.7 mm thickness For sheet metals as from 1.1 mm thickness, plastic up to 3 mm, wood up to 5 mm 97 0,6 12, } For sheet metals mm thickness For sheet metals up to 0.7 mm thickness Attention: do not use any pressure, feed only with dead weight of machine. } B/129

39 Metal Hacksaw Blades Types Type F Type M Type R Type BiH Flexible, economical carbon steel blade. Universally usable, partially heat treated HSS blade. Full-hardened blade for precise, guided cuts, made from HSS steel with high Cobalt content. Blade with hardened tooth tips, therefore semi-flexible with high hardness made from HSS steel with high Cobalt content Type Bi-Metal Unbreakable made from HSS Bi-metal, for flexible, robust application. Type No. of teeth/inch Prod.-No. Typ F 18 Z Wavy Set 3300F18 Typ F 24 Z Wavy Set 3300F24 Typ F 32 Z Wavy Set 3300F32 Typ M 18 Z Raker Set 3300M18 Typ M 24 Z Raker Set 3300M24 Typ M 32 Z Wavy Set 3300M32 Typ R 18 Z Raker Set 3300R18 Typ R 24 Z Raker Set 3300R24 Typ R 32 Z Wavy Set 3300R32 Typ BiH 18 Z Raker Set 3300BiH18 Typ BiH 24 Z Raker Set 3300BiH24 Typ BiH 32 Z Wavy Set 3300BiH32 Typ Bi-Metall 18 Z Raker Set 3300BiM18 Typ Bi-Metall 24 Z Raker Set 3300BiM24 HSS-Bi-Metal 32 Z Wavy Set 3300BiM32 n Customer brand execution in colour, imprint and packaging from 15,000 pieces possible n Packaging unit: 100 pieces Machine Saw Blades HSS DM O5 For Hacksawing machines n You can use the efficiency of the whole machine with these machine saw blades. n For sawing solid material, pipes and profiles of all strengths. n Also for high-strength steels n With parabolic tooth against early break n Sharp-edged and wear-resistant, with fine carbide repartition in micro structure n Straightened by master hand n For all types of machines Dimension mm available toothing tpt Prod.-No. 300 x 25 x x 30 x x 30 x x 30 x x 30 x x 30 x x 35 x x 40 x 2.0K x 40 x x 50 x 2.5K x 55 x 2.5K x 55 x 2.5K Prod.-No K = Kasto with displaced side holes Other dimensions and toothings on request. Length measured from hole center to center. Packaging unit: 10 pieces B/130

40 Coolant Cutting, Drilling, Broaching Oils RIXOL-2000 Coolant concentrate n Universal use for sawing and drilling of steel, stainless steel, cast iron, nonferrous metal and aluminium alloys. n Water emulssive, contains mineral oil, rot-proof, stable solution. n Provides good rust protection and lubrication. Causes no irritation of the skin. n No smoke development and no coagulation. n Factor I for hand refranctometer. n Mixture: Cutters 8-10%, Circular saws 5-12%, Band saws 6-20 % Prod.-No. 10 kg plastic container ALFRA BIO 2000 High performance cutting oil, biologically degradable n ALFRA BIO 2000 is an entirely synthetic cutting oil, developed for the metal working industry for core drilling, turning, drilling, milling, reaming, countersink, rubbing, tapping n Ideally qualified for all steel and steel alloys, chrome-nickel steel, copper, aluminium alloys. n ALFRA BIO 2000 doesn t contain any hydrocarbon and is chlorine free. n With special high pressure and anti wear additives. n With corrosion and rust protection. n Increases tool life up to 200 % and shortens operating time, reduces the number of rejects. n Biologically degradable according to the EU standard: CEC L-33-T-94 Prod.-No Excellent for use with Rotabest -Metal Core Drilling Machines, because they are water soluble. Prod.-No. Can 405 ml kg plastic container kg drum ALFRA 3000 High performance Cutting Oil Spray n For the most difficult working procedures like core drilling, drilling, turning, tapping, reaming, countersink, rubbing n With special high pressure and anti wear additives. n For usage of high alloyed stainless steel, chrome-nickel steel and its alloys, titanium and manganese carbon steel. n Qualified for non-ferrous- and light metals. n Increases tool life up to 200 %, shortens operating time. Reduces the number of rejects. n Sticks on surfaces, therefore it s qualified for over head works on walls and ceilings. Prod.-No. Can 520 ml kg plastic container kg drum Prod.-No Prod.-No B/131