Feel the quality, be exclusive. Cartridge Guide 1

Size: px

Start display at page:

Download "Feel the quality, be exclusive. Cartridge Guide 1"

Florence Johnson
6 years ago
Views:

1 Feel the quality, be exclusive Guide 1

2 Index High Technology for quality soldering 4 Bigger is better 6 Factors limiting life of tips 7 Cleaning systems 8 C105 s range 12 C120 s range 16 C130 s range 18 C210 s range 20 C245 s range 24 C250 s range 44 C420 s range 47 C470 s range 50 C360 Tips range 58 C560 Tips range

A global organization at your service JBC is a global company with a distributor network spanning 5 continents that guarantees a solid commercial organization with quick and efficient service.

Innovation, efficiency and reliability are the key features of a wide range of products which have been designed to satisfy the most demanding requirements of professionals.

The R&D department has created the most innovative soldering technologies, which JBC is proud to present in this catalogue. ESD safe All JBC products comply with CE standards and EDS recommendations.

3 A global organization at your service JBC is a global company with a distributor network spanning 5 continents that guarantees a solid commercial organization with quick and efficient service. The power of experience More than 85 years of experience have placed JBC at the technological forefront of tools for soldering and rework operations in electronics. Innovation, efficiency and reliability are the key features of a wide range of products which have been designed to satisfy the most demanding requirements of professionals. High technology, superior quality Product perfection is one of the main objectives of JBC s improvement and development program. The R&D department has created the most innovative soldering technologies, which JBC is proud to present in this catalogue. ESD safe All JBC products comply with CE standards and EDS recommendations. JBC Soldering SL. reserves the right to update, modify or delete any information without previous notice. High Technology for quality soldering The JBC Exclusive Heating System JBC s stations work with the JBC Exclusive Heating System which recovers tip temperature extremely quickly. This increases work efficiency and allows the user to work with lower temperatures. 350ºC 20ºC Enhanced Temperature Efficiency 350ºC 320ºC 280ºC temp temp 350ºC in 2 seconds Difference in Thermal response: 8 sec Efficient Temperature Control Comparative process of 3 solder joints 335ºC avg. temp. 300ºC avg. temp. Time exceed 5,5 sec time Increase Productivity + Better Quality 35ºC difference of temp. drop JBC time Another top brand The Intelligent Heat Management The JBC equipment also incorporates the Sleep & Hibernation modes to help extend tip life by further reducing the temperature when the tool is not in use. As a result, tip life increases by 5. The Sleep function automatically reduces tip temperature when the tool is in the stand. When the set time for Sleep mode is up, the station automatically goes to Hibernation. The power supply is cut and the tip remains at room temperature. Tip life increases exponentially by using lower temperatures as shown. Using the Sleep mode the temperature is further reduced, which extends tip life by 5. s with extended tip life The essential part of the soldering iron is the tip so JBC has over 400 models of cartridges of different sizes and shapes to choose from depending on each application. JBC has developed the most advanced technology based on the following principles: T work T sleep T amb 5x 4x 3x 2x 1x 1/2x 0 temp 0 Tip life Work 180ºC Sleep Sleep & Hibernation Sleep from 0 to 60 min. (programmable) Tool in the stand Tip life up to 5x longer 350ºC Set point Hibernation 400ºC 450ºC 2sec. Work temp Excellent Heat Transfer The compact element reduces thermal barriers. Instantaneous Heating Up A fully integrated thermal sensor in the heater ensures quick temperature recovery. Great Durability The intelligent algorithm control program extends tip life. time 4 5

When you start working do not forget: Bigger is better As you know, the bigger the solder tip, the better the thermal transfer. So remember to select the biggest tip possible for your application.

temperature, the higher the oxidation and the corrosion. Work at the lowest possible temperature. Use thermal efficient tools and keep tips clean of oxidation.

Remember Tip structure The JBC range includes models from Ø0,1 mm for precision work to the Ø15 mm for high power requirement applications.

A high thermal efficient tip makes your job up to 40% faster than a tip with a slimmer geometry.

The bigger the contact surface the tip has with application, the higher the thermal transfer.

(thermal stress on and PCBs) Correct soldering techniques Too much pressure on the surface to solder can cause tip or plate breakage. Do not use as a pointed object or a screwdriver.

4 When you start working do not forget: Bigger is better As you know, the bigger the solder tip, the better the thermal transfer. So remember to select the biggest tip possible for your application. Factors limiting life of tips Over 400 tips of different sizes, shapes and power Geometry Slimness vs Efficency Increase the contact surface Tip-Application Working temperature The higher the temperature, the higher the oxidation and the corrosion. Work at the lowest possible temperature. Use thermal efficient tools and keep tips clean of oxidation. Flux and solder alloy Too much active Flux can cause corrosion. IPC recommends: ROL, REL and ORL. The internal flux from small Ø solder reels might not be enough. Provide external Flux if necessary. Remember Tip structure The JBC range includes models from Ø0,1 mm for precision work to the Ø15 mm for high power requirement applications. Largest mass possible The more mass the tip has, the more heat accumulated and the lower the temperature drop. A high thermal efficient tip makes your job up to 40% faster than a tip with a slimmer geometry. Maintain tip surface clean and tinned Remember that rusty and dirty surfaces reduce heat transfer to the solder joint. (See JBC s cleaning methods on pages 8-9). The bigger the contact surface the tip has with application, the higher the thermal transfer. This way you will be able to: Work at lower temperatures (350ºC / 662ºF) Obtain better results in less time Improve thermal performance Increase temperature precision Reduce collateral damage (thermal stress on and PCBs) Correct soldering techniques Too much pressure on the surface to solder can cause tip or plate breakage. Do not use as a pointed object or a screwdriver. Choose the biggest possible tip for each application to work at the lowest possible temperature. Iron plating thickness The wearing down of the plate shortens its life (hollowed-out). Do not use mechanical or chemical means to clean the tip. Use the cleaning methods provided by the manufacturer. Do not apply too much pressure. Oxidization Iron oxide does not wet nor transfer temperature well (dewetting). The higher the temperature, the greater the risk of oxidation. Keep tips always tinned while not in use. Use flux on your solder joints. Take advantage of SLEEP & HIBERNATION functions. 2 seconds HEAT UP Always work at the LOWEST POSSIBLE TEMPERATURE. Uses THERMAL EFFICIENT TOOLS. Choose the BIGGEST tip possible. IPC recommends FLUX ROL, REL and ORL. Protect the tip with a TIN COATING when not in use. Use the SLEEP & HIBERNATION functions. DO NOT apply too much pressure to the tip Use the CLEANING METHODS recommended by the manufacturer. Only use re-tinners when absolutely necessary. 6 7

Cleaning systems For a good thermal transfer, keep the tip clean of

$splashing and extend a tip s life: Clean the tip in a fraction of a second$ Improve heat transfer Easy to empty Keep your work area clean Solder

particles. Automatic Junior Tip Cleaner Ref.

CLMB-A, CLMB-PA Automatic Universal Tip Cleaner Ref.

CL8499 Save space You can easily fit the tip cleaner into your work area

Two modes of operation The motorized brushes start by pressing the button

Sensor detection Two motorized brushes start working when the sensors

Sensor Vertical Access This innovative tip cleaner features a second

Continuous or Sensor mode This Cleaner is excellent for cleaning tips with

You can easily switch between sensor and continuous mode by pressing the

5 Cleaning systems For a good thermal transfer, keep the tip clean of oxidizing and solder remains. JBC offers effective, practical and affordable methods to prevent splashing and extend a tip s life: Clean the tip in a fraction of a second Improve heat transfer Easy to empty Keep your work area clean Solder collector Splashguard With automatic cleaners you get optimal and uniform cleaning in a very short time. A clean tip is always easier to tin resulting in higher quality solder joints. The solder collector tray can be easily emptied and re-used with no wear and tear. The splashguard helps keep the bench always clean and free of solder particles. Automatic Junior Tip Cleaner Ref. CLMS Automatic Senior Tip Cleaner Ref. CLMB-A, CLMB-PA Automatic Universal Tip Cleaner Ref. CLMU-A ESD Tip Cleaner Ref. CL8499 Save space You can easily fit the tip cleaner into your work area thanks to its reduced size. Two modes of operation The motorized brushes start by pressing the button or by selecting the continuous mode. Sensor detection Two motorized brushes start working when the sensors detect the tip at the window. Sensor Vertical Access This innovative tip cleaner features a second position which facilitates working with robots. Continuous or Sensor mode This Cleaner is excellent for cleaning tips with different shapes and sizes. You can easily switch between sensor and continuous mode by pressing the top buttons. Continuous mode Sensor mode Brass wool Ref. CL6210 Very effective cleaning method. Leaves a small layer of solder on the tip preventing oxidation between cleaning. Tip wiper Ref. CL0240 This is the method to eliminate the excess of solder in the tip. Tip wiper Brass Wool Switch ON Sponge Brushes for CLMS Ref. CLMS-A8 Brushes for CLMB Ref. CLMB-A8 Ref. CLMB-A7 Ref. CLMB-P1 Non metal brushes Ref. CLMB-P7 Non metal brushes Brushes for CLMU Ref. CLMU-A8 Ref. CLMU-A7 Ref. CLMU-P1 Non metal brushes Ref. CLMU-P7 Non metal brushes Sponge Ref. CL0354 This is the softest method. Be sure to have the sponge always clean and wet, not soaked, with de-ionated water. 8 9

6 Our cartridge range is steadily growing as we are determined to respond to our client s specific needs cooperating closely with them to create the right solution 10 11

C105 s for NP105 & NT105 Nano tools C105 range for NP105 & NT105 Nano tools & dimensions &

0,4mm QFP, IC, C105-110 Ø 0,5 QFP, IC, C105-101 Conical Ø 0,1 Package 01005 Very fine pitch

0,3 S1 Fine pitch 0,65mm C105-117 0,4 x 0,2 Package 0402 Very fine pitch 0,65mm C105-106 Conical

. C105-107 Conical Ø 0,8 C105-125 1 x 0,2 Package 0805 Difficult to reach C105-124 Ø 0,1 S1

7 C105 s for NP105 & NT105 Nano tools C105 range for NP105 & NT105 Nano tools & dimensions & dimensions C Ø 0,3 Fine pitch 0,65mm C Conical Ø 0,1 Package Very fine pitch 0,4mm QFP, IC, C Ø 0,5 QFP, IC, C Conical Ø 0,1 Package Very fine pitch 0,4mm QFP, IC, C ,2 x 0,1 Package 01005, 0201 Very fine pitch 0,4mm C Conical Ø 0,3 S1 Fine pitch 0,65mm C ,4 x 0,2 Package 0402 Very fine pitch 0,65mm C Conical Ø 0,5 C ,6 x 0,3 PLCC, SO, SOT,.. C Conical Ø 0,8 C x 0,2 Package 0805 Difficult to reach C Ø 0,1 S1 Package Very fine pitch 0,4mm C x 0,3 Package 0805 C Ø 0,1 Package Very fine pitch 0,4mm QFP, IC,. C x 0,3 S1 Package

C105 s for NP105 & NT105 Nano tools C105 s for NP105 & NT105

Package 0805 C105-128 Spoon Ø 1 SMD C105-222 1,6 x 0,3

C105-114 1,8 x 0,5 Package 1206, 1210 C105-112 Knife 2,5 x

. Package 1210, 1812, 2010, 2512 C105-214 1,8 x 0,5 S1

. Package 1210, 1812, 2010, 2512 C105-223 2,4 x 0,6 Package

. C105-115 Cutter Stainless Steel 1 Stainless Steel Remove

8 C105 s for NP105 & NT105 Nano tools C105 s for NP105 & NT105 Nano tools & dimensions & dimensions C ,3 x 0,3 Package 0805 C Spoon Ø 1 SMD C ,6 x 0,3 Package 0805 C Knife 1 x 0,2 SMD Package 0805 C ,8 x 0,5 Package 1206, 1210 C Knife 2,5 x 0,3 SMD SO, SOT,.. Package 1210, 1812, 2010, 2512 C ,8 x 0,5 S1 Package 1206, 1210 C Knife 2,5 x 0,3 S1 SMD SO, SOT,.. Package 1210, 1812, 2010, 2512 C ,4 x 0,6 Package 0805 C Knife 3,5 x 0,7 Package 1210, 1812 SO, SOT,.. C Cutter Stainless Steel 1 Stainless Steel Remove underfill encapsulants C Knife 3,5 x 0,7 Package 1210, 1812 SO, SOT,.. C Bevel Ø 0,6 SMD C Bevel Ø 1 SMD 14 15

9 C120 s for PA120 Micro Tweezers C120 range for PA120 Micro Tweezers & dimensions & dimensions C Dual in Line 3 Package 1210, 1812 SO, SOT,.. CP, PA120-A C Dual in Line Ø 0,2 CP, PA120-A C Dual in Line 5 SO, SOT,.. CP, PA120-A C Chip Ø 0,2 CP, PA120-A C Dual in Line 3,5 Right Package 1210, 1812 SO, SOT,.. CP, PA120-A C Chip Ø 0,3 Fine pitch 0,65mm CP, PA120-A C Dual in Line 3,5 Left Package 1210, 1812 SO, SOT,.. CP, PA120-A C Chip Ø 0,5 CP, PA120-A C Dual in Line 6 Right SO, SOT,.. CP, PA120-A C Chip Ø 0,7 S1 SMD capacitors CP, PA120-A C Dual in Line 6 Left SO, SOT,.. CP, PA120-A C Chip Ø 0,7 S2 SMD capacitors CP, PA120-A C Chip 0,6 CP, PA120-A 16 17

10 C130 s for AP130 Solder Feed Iron C130 range for AP130 Solder Feed Iron & dimensions & dimensions C ,2 x 0,7 CF, AP130-A C Ø 0,6 CF, AP130-A C ,8 x 0,8 CF, AP130-A C Ø 0,8 CF, AP130-A C ,2 x 1 CF, AP130-A C Ø 1 CF, AP130-A C ,2 x 1,5 CF, AP130-A C Ø 1,7 CF, AP130-A C ,8 X 1,5 CF, AP130-A C Ø 2,2 CF, AP130-A C Ø 3 CF, AP130-A C Ben Ø 4 CF, AP130-A 18 19

C210 s for T210 Precision Purpose Handles C210

dimensions & dimensions C210-002 Ø 0,2 C210-020

0,4mm C210-010 Ø 0,3 Fine pitch 0,65mm C210-009

0,4mm C210-014 Ø 0,5 C210-016 Conical Ø 0,3 S1

Ø 0,3 S2 Fine pitch 0,65mm C210-006 Bevel Ø 1 Drag

1,5 Drag Soldering C210-003 Conical Ø 0,6 C210-031

11 C210 s for T210 Precision Purpose Handles C210 range for T210 Precision Purpose Handles & dimensions & dimensions C Ø 0,2 C Conical Ø 0,1 Package 01005, 0201 Very fine pitch 0,4mm C Ø 0,3 Fine pitch 0,65mm C Conical Ø 0,2 Package 01005, 0201 Very fine pitch 0,4mm C Ø 0,5 C Conical Ø 0,3 S1 Fine pitch 0,65mm C Ø 0,7 C Conical Ø 0,3 S2 Fine pitch 0,65mm C Bevel Ø 1 Drag Soldering C Conical Ø 0,5 C Bevel Ø 1,5 Drag Soldering C Conical Ø 0,6 C Bevel Ø 2 Drag Soldering C Conical Ø 1 C Spoon Ø

12 C210 s for T210 Precision Purpose Handles C210 s for T210 Precision Purpose Handles & dimensions & dimensions C Spoon Ø 1,5 C ,3 x 0,7 Package 0805 C Spoon Ø 2 C Pin Ø 0,7 C ,2 x 0,1 Package 01005, 0201 Very fine pitch 0,4mm C Pin/Connector Ø 0,8 Coaxial connector C ,4 x 0,2 Package 0402 Very fine pitch 0,65mm C Pin/Connector Ø 1,1 Coaxial connector C ,6 x 0,3 C Pin/Wire Ø 1 Cables Connectors C ,8 x 0,3 Package 0805 C Knife 3,4 x 0,3 SMD SO, SOT,.. Package 1210, 1812, 2010, 2512 C ,3 x 0,4 Package 0805 C ,3 x 0,6 Package

C245 s for T245 Handles C245 range for T245 Handles C245-957 Conical Ø 0,8 C245-030 Conical Ø 0,3 Fine pitch 0,65mm C245-903 Conical Ø 1 S1 C245-032 Conical Ø 0,4 Fine pitch 0,65mm C245-803 Conical Ø

13 C245 s for T245 Handles C245 range for T245 Handles C Conical Ø 0,8 C Conical Ø 0,3 Fine pitch 0,65mm C Conical Ø 1 S1 C Conical Ø 0,4 Fine pitch 0,65mm C Conical Ø 1 L C Conical Ø 0,5 S1 C Conical Ø 1 S2 Tip with an extra tinned surface C Conical Ø 0,5 S2 C Conical Ø 1 HT C Conical Ø 0,6 C Conical Ø 1,7 C Conical Ø 0,6 L C Conical Ø 2,2 C Conical Ø 0,6 HT C Conical Ø 3 HT 24 25

C245 s for T245 Handles C245 s for T245 Handles C245-034 Ø 0,4 S1 Fine pitch 0,65mm C245-804 Ø 1 L C245-234 Ø 0,4 S1 L Fine pitch 0,65mm C245-259 Ø 1,5 C245-029 Ø 0,4 S2 Fine pitch 0,65mm C245-260 Ø

14 C245 s for T245 Handles C245 s for T245 Handles C Ø 0,4 S1 Fine pitch 0,65mm C Ø 1 L C Ø 0,4 S1 L Fine pitch 0,65mm C Ø 1,5 C Ø 0,4 S2 Fine pitch 0,65mm C Ø 2 HT C Ø 0,4 S3 Fine pitch 0,65mm C Ø 3 C Ø 0,4 S4 Fine pitch 0,65mm C Ø 4 HT C Ø 0,6 C ,6 x 0,3 C Ø 0,8 C ,8 x 0,3 Package 0805 C Ø 1 C ,8 x 0,3 L Package

15 C245 s for T245 Handles C245 s for T245 Handles C ,8 x 0,6 HT Package 0805 C ,2 x 1 C ,2 x 0,3 C ,2 x 1 L C ,2 x 0,7 C ,2 x 1 HT C ,2 x 0,7 L C ,4 x 0,5 HT C ,2 x 0,7 HT C ,4 x 0,3 C ,5 x 0,3 C ,4 x 0,6 HT C ,8 x 0,8 C ,7 x 1 C ,8 x 0,8 L C x

C245 s for T245 Handles C245 s for T245 Handles C245-261 3 x 1 L C245-708 4,8 x 1,5 HT S2 C245-911 3,2 x 1,2 C245-069 5 x 1,7 HT C245-811 3,2 x 1,2 L C245-966 6,6 x 1,8 HT C245-775 3,2 x 1,2 S1

16 C245 s for T245 Handles C245 s for T245 Handles C x 1 L C ,8 x 1,5 HT S2 C ,2 x 1,2 C x 1,7 HT C ,2 x 1,2 L C ,6 x 1,8 HT C ,2 x 1,2 S1 C ,2 x 0,7 C x 0,8 HT C ,2 x 0,7 L C ,8 x 1 HT C ,8 x 0,8 C ,8 x 1,5 HT S1 C ,8 x 0,8 L C ,8 x 1,5 HT L C ,2 x 1,

C245 s for T245 Handles C245 s for T245 Handles C245-846 2,2 x 1 L C245-905 Bevel Ø 1,5 C245-732 3,2 x 1,5 C245-405 Bevel Ø 1,5 HT C245-761 3,0 x 1 C245-102 Bevel Ø 2 Hoof tip with reduced tinned

17 C245 s for T245 Handles C245 s for T245 Handles C ,2 x 1 L C Bevel Ø 1,5 C ,2 x 1,5 C Bevel Ø 1,5 HT C ,0 x 1 C Bevel Ø 2 Hoof tip with reduced tinned surface, ideal for tuch up C Bevel Ø 0,6 S1 C Bevel Ø 2,2 C Bevel Ø 0,6 S2 C Bevel Ø 2,2 L C Bevel Ø 0,6 C Bevel Ø 2,8 C Bevel Ø 1,2 C Bevel Ø 2,8 C Bevel Ø 1,3 Hoof tip with reduced tinned surface, ideal for tuch up C Bevel Ø

2,7 C245-056 Bevel Ø 3,5 HT C245-938 Spoon Ø

Pin/Connector Ø 0,8 Cable sold/desol C245-951

Cable sold/desol C245-766 Bevel Ø 5 Wide area

18 C245 s for T245 Handles C245 s for T245 Handles C Bevel Ø 3 L C Spoon Ø 2,7 C Bevel Ø 3,5 HT C Spoon Ø 3,8 C Bevel Ø 3,5 HT L C Pin/Connector Ø 0,8 Cable sold/desol C Bevel Ø 3,8 HT C Pin/Connector Ø 1,5 Cable sold/desol C Bevel Ø 5 Wide area C Pin/Connector Ø 2,5 Cable sold/desol C Bevel Ø 8,8 Wide area C Pin/Connector Ø 3,5 Cable sold/desol C Spoon Ø 1,9 C Pin/Connector R. 4,5 Cable sold/desol C Spoon Ø 2,3 C Knife 3,5 x 0,

19 C245 s for T245 Handles C245 s for T245 Handles C Knife 6,0 x 0,4 C Blade 40 Pad cleaning Conector desoldering C Knife 6,0 x 0,4 S1 C Chip 1,25 SMD resistors SMD capacitors C Knife 13,0 x 0,5 Drag Soldering Conector desoldering C Chip 1,9 SMD resistors SMD capacitors C Blade 10 S1 Pad cleaning Conector desoldering C Chip 2 SMD resistors SMD capacitors C Blade 15 Pad cleaning Conector desoldering C Chip 2,2 S1 SMD resistors SMD capacitors C Blade 21 Pad cleaning Conector desoldering C Chip 2,2 S2 SMD resistors SMD capacitors C Blade 32 Pad cleaning Conector desoldering C Chip 3,4 SMD resistors SMD capacitors C Blade 37 Pad cleaning Conector desoldering C Chip 4,5 SMD resistors SMD capacitors 36 37

20 C245 s for T245 Handles C245 s for T245 Handles C Drag 0,75 C Tunnel 5,4 x 10 Dual in Line IC C Drag 0,75 L C Tunnel 6,5 x 6 Dual in Line IC C Drag 1,25 C Tunnel 7,1 x 13 Dual in Line IC C Drag 1,25 L C Tunnel 9,6 x 10 Dual in Line IC C Drag 1,25 S1 L C Tunnel 9,6 x 12 Dual in Line IC C Drag 1,25 S2 L C Tunnel 9,6 x 15 Dual in Line, IC C Tunnel 5,4 x 6 Dual in Line IC C Tunnel 9,6 x 18 Dual in Line IC C Tunnel 5,4 x 8 Dual in Line IC C Tunnel 15,2 x 29 Dual in Line IC 38 39

21 C245 s for T245 Handles C245 s for T245 Handles C QFP 8,5 x 8,5 QFP C Rivet Ø 4,9 Chrome finisg, design for plastic rivets C QFP 12 x 12 QFP C Rivet Ø 6,5 Chrome finisg, design for plastic rivets C QFP 12,4 x 15 QFP C for Plastics Ø 3,2 Plastics C QFP 15 x 15 QFP C for Plastics Ø 4,1 Plastics C QFP 17,5 x 17,5 QFP C for Plastics 4 x 4 Plastics C Socket 11,9 x 14,5 PLCC sockets C for Plastics 4,25 x 2 Plastics C Socket 17 x 17 PLCC sockets C Cutter 4,3 x 0,1 Plastics Remove underfill encapsulants C Rivet Ø 3,8 Chrome finisg, design for plastic rivets C Cutter 12 Plastic Rubber cutter 40 41

22 C245 s for T245 Handles C245 s for T245 Handles C Cutter 13 Plastic Rubber cutter C Pin/Wire 0,4 Wire tinning C for Plastics 20 x 6 Plastics C Blade 10 S2 Pad cleaning Conector desoldering C Conical Teflon Ø 1 Plastics C Pin/Wire 1,5 C Pin/Connector R. 1 Coaxial connector C Micro Stick Switch Micro Stick desoldering C Pin/Connect. 1,5 x 0,5 Cilinder parts C Nickel 1,4 x 0,7 S1 HMP soldering C Fine Pitch Ø 0,5 Fine pitch C S-Lead 4,5 x 1,8 Drag Soldering C x 0,1 Cable soldering to connector Fine pitch C J-Lead 4,5 x 1,8 J-lead C Flat Ø 1,45 C245-SP01 Solder Pot 15 x 18 Tinnig wires Through Hole Multipin 42 43

C250 s for AL250 Auto-Feed & AP250 Solder Feed

Solder Feed Irons C250-405 1,8 x 0,8 AL250-B AP250

C250-406 2,2 x 1 AL250-B AP250 C250-401 Ø 0,6

C250-402 Ø 0,8 AL250-B AP250 C250-412 4,8 x 1,5

1,2 x 0,7 AL250-B AP250 C250-409 Ø 1,7 AL250-B

2,2 AL250-B AP250 C250-413 2,2 x 1 S2 AL250-B

23 C250 s for AL250 Auto-Feed & AP250 Solder Feed Irons C250 range for AL250 Auto-Feed & AP250 Solder Feed Irons C ,8 x 0,8 AL250-B AP250 C Ø 0,4 Fine pitch 0,65mm AL250-B AP250 C ,2 x 1 AL250-B AP250 C Ø 0,6 AL250-B AP250 C Ben 3,2 x 1,5 AL250-B AP250 C Ø 0,8 AL250-B AP250 C ,8 x 1,5 AL250-B AP250 C Ø 1 AL250-B, AP250 C ,2 x 0,7 AL250-B AP250 C Ø 1,7 AL250-B AP250 C ,2 x 1 S1 AL250-B AP250 C Ø 2,2 AL250-B AP250 C ,2 x 1 S2 AL250-B AP250 C ,2 x 0,7 AL250-B AP250 C ,8 x 1,5 AL250-B AP

range for HT420 Thermal Tweezers C250-415 Bevel Ø

SMD capacitors HT420-A C420-287 Chip 2 Special

capacitors HT420-A C420-273 Dual in Line 4

. DIP HT420-A C420-274 Dual in Line 6 DIP IC

24 C250 s for AL250 Auto-Feed & AP250 Solder Feed Irons C Bevel Ø 2,2 AL250-B AP250 C420 range for HT420 Thermal Tweezers C Bevel Ø 3,8 AL250-B AP250 C Chip 1,5 SMD resistors SMD capacitors HT420-A C Chip 2 Special HT420-A C Chip 2,6 SMD resistors SMD capacitors HT420-A C Dual in Line 4 Package 1210, 1812 SO, SOT,.. DIP HT420-A C Dual in Line 6 DIP IC HT420-A C Dual in Line 8 DIP IC HT420-A C Dual in Line 10 DIP IC HT420-A 46 47

25 C420 s for HT420 Thermal Tweezers C420 s for HT420 Thermal Tweezers C Dual in Line 15 DIP IC HT420-A C Blade 50 Pad cleaning Connector desoldering HT420-A C Dual in Line 20 DIP IC HT420-A C Dual in Line 22 QFP PLCC HT420-A C QFP 8 QFP PLCC HT420-A C QFP 11 QFP PLCC HT420-A C Stripper Inf. Ø 3,5 Max Wire stripper HT420-A C Stripper Sup. Ø 3,5 Max Wire stripper HT420-A C U Shape 15,6 x 14,3 Special HT420-A 48 49

Handles and HT470 HD Thermal Tweezers C470-017

1,5 Sheet metal C470-008 Ø 3,5 C470-002 6 x

1,7 C470-036 2 x 1 C470-004 7,5 x 1,5 Sheet

C470-040 4 x 1,3 S2 C470-058 8 x 2,5 Sheet

26 C470 s for T470 HD Handles and HT470 HD Thermal Tweezers C470 range for T470 HD Handles and HT470 HD Thermal Tweezers C x 1,2 C Conical Ø 1,7 C ,5 x 1,5 Sheet metal C Ø 3,5 C x 1,5 Sheet metal C x 0,9 C x 1,7 C x 1 C ,5 x 1,5 Sheet metal C x 1,3 S1 C ,5 x 1,7 C x 1,3 S2 C x 2,5 Sheet metal C x 2,5 Station C ,5 x 2,5 Sheet metal 50 51

27 C470 s for T470 HD Handles and HT470 HD Thermal Tweezers C470 s for T470 HD Handles and HT470 HD Thermal Tweezers C x 2,5 Sheet metal C Bevel Ø 10 Wide area Shield desoldering Sheet metal C ,5 x 2,5 Sheet metal C Flat Ø 15 Shield desoldering Metal PCB Sheet metal C x 4 Sheet metal C Flat 10 x 15 Shield desoldering Metal PCB Sheet metal C x 4 Sheet metal C Flat 20 x 30 Shield desoldering Metal PCB Sheet metal C ,9 x 1,7 Sheet metal C Ø 1,2 Cable C ,5 x 1,5 C Ø 3,2 Cable C Bevel Ø 3,5 C Ø 3,4 Cable C Bevel Ø 7,5 Sheet metal C Ø 5,2 Cable 52 53

28 C470 s for T470 HD Handles and HT470 HD Thermal Tweezers C470 s for T470 HD Handles and HT470 HD Thermal Tweezers C Ø 4 Cable C Ø 12,5 Cable C Ø 3,65 Cable C Ø 4,8 Cable C Ø 5 Cable C R. 6 S1 Cables Connectors C Ø 8 Cable C R. 6 S2 Wide area Cables Connectors C Ø 14 Cable C Pin Ø 2,4 C R. 8,5 Cables connectors C Pin Ø 3,5 Male connector C R. 8 Cables connectors C Hook Ø 4,2 Difficult to reach C R. 31 Connectors C Blade 10 Pad cleaning Connector desoldering 54 55

29 C470 s for T470 HD Handles and HT470 HD Thermal Tweezers C470 s for T470 HD Handles and HT470 HD Thermal Tweezers C Blade 20 Pad cleaning Connector desoldering C Single Flat 7,5 Sheet metal C Blade 32 Pad cleaning Connector desoldering C Ø 3,8 Cable Connectors C Blade Split 21 Connectors C470-SP01 Solder Pot 15 x 18 Tinnig wires Through Hole Multipin C for Plastics Ø 1,7 Plastics C for Plastics Ø 3,5 Plastics C for Plastics Ø 9 Plastics C Shield 43 x 20 Shield desoldering C Groove 1,1 x 10 Wire soldering 56 57

30 C360 Tips for DS360 Micro Iron C360 Tips range for DS360 Micro Iron C Micro Tip Ø 0,8 Pad Pad desoldering CV, DS360-A C Micro Tip Ø 0,6 CV, DS360-A C Micro Tip Ø 1 Pad Pad desoldering CV, DS360-A C Micro Tip Ø 0,8 CV, DS360-A C Micro Tip Ø 1,2 Pad Pad desoldering CV, S360-A C Micro Tip Ø 1 CV, DS360-A C Micro Tip Ø 1,2 CV, DS360-A C Micro Tip Ø 1,4 CV, DS360-A C Micro Tip Ø 1,5 CV, DS360-A C Micro Tip Ø 0,6 Pad Pad desoldering CV, DS360-A 58 59

31 C560 Tips for DR560 Iron C560 Tips range for DR560 Iron C Tip Ø 1,5 DR560 C Tip Ø 0,6 HT DR560 C Tip Ø 1,9 DR560 C Tip Ø 0,8 HT DR560 C Tip Ø 2,4 DR560 C Tip Ø 0,8 DR560 C Tip Ø 3 DR560 C Tip Ø 1 DR560 C Tip Ø 0,6 HT Pad Pad desoldering DR560 C Tip Ø 1,1 DR560 C Tip Ø 0,8 HT Pad Pad desoldering DR560 C Tip Ø 1,3 DR560 C Tip Ø 1 Pad Pad desoldering DR560 C Tip Ø 1,3 DR

32 Notes 62 63

33 /1117

PRODUCT SPECIFICATION October 2012 KMT 0 NG LHS / NGJ LHS KMT 0 NGJ LHS ULC

PRODUCT SPECIFICATION October 2012 KMT 0 NG LHS / NGJ LHS KMT 0 NGJ LHS ULC Ref. / PS-KMT-281 Page 1 of 8 Approvals: Laurent Kubat Date Engineering Manager Revision record: Revision Date Comments - March 22 nd 2010 Creation rev. A May 28 th, 2010 Update : (According to ECR N 5437)