Diamond and boron nitride tools Overview
|
|
- Eustacia Chandler
- 5 years ago
- Views:
Transcription
1 . iamond and boron nitride tools iamond and boron nitride tools Overview iamond 274 and boron nitride grinding points 14 iamond dressers 04 iamond/boron nitride deburring tools 17 iamond sheets and strips 08 iamond abrasive wheels and discs 20 iamond files 268 el. +49 (0) / Fax +49 (0) / info@joke.de
2 . iamond and boron nitride tools iamond and boron nitride tools Overview iamond and boron nitride grinding points 274 iamond grinding points 274 iamond and boron nitride tools 297 iamond/boron nitride deburring tools 04 iamond reamers 04 iamond/boron nitride spheres, slotted 05 iamond spring steel wires 07 iamond abrasive wheels and discs 08 iamond cup wheel discs 08 iamond grinding discs 10 iamond cut-off discs 11 iamond abrasive sheets and strips 12 iamond dressers 14 iamond single-stone dressers 14 iamond multiple-stone dressers 15 iamond multi-grit dressers 16 iamond sheets and foils 17 iamond files 20 iamond machine files 21 iamond hand files 4 Conical diamond machine files 48 Conical diamond hand files 51 0 iamond and boron nitride tools el. +49 (0) / Fax +49 (0) / info@joke.de 269
3 . iamond and boron nitride tools iamond and Boron nitride tools Interesting facts iamond and Boron nitride tools are available in galvanic, resin, metal or the new vacuum brazed bonding Ñ Galvanic bonding With this type of bonding, the diamond or boron nitride grain is bonded to the carrier by galvanisation. he bonding is applied in layers, whose thickness is dependent on the. In special cases, however, several layers may be applied. In this bonding, the abrasive grits project to a relatively high degree from the bonding. hese tools are highly effective and allow high cutting rates. his bonding allows economical and rapid manufacture of special tools. Recoating of the worn tool is possible. Ñ Metal bonding he abrasive coating in this type of bonding consists of a mixture of metal powder and diamond or boron nitride grit. Grinding tools with metal bonding are manufactured by sintering. he high degree of hardness of the metal bonding renders the grinding wheel very resistant to wear, but is not as effective as the other bonding systems. Concentration C100 as standard Applications Ceramic materials, glass, profile grinding of tungsten carbide, ferrite (diamond). Cutting speed: Approximately 10-0 m/s shipbuilding), tungsten carbide green compact (unsintered tungsten carbide), ceramics (i.e. valve covers for car engines), coal products (i.e. brake discs, carbon brushes) and cast materials. Cutting speed: Approximately m/s Ñ iamond and boron nitride abrasives iamond and boron nitride are the hardest abrasives in the world. hey are far harder in comparison to conventional abrasives such as corundum and silicon carbide. iamonds exist in natural and synthetic form. Boron nitride exists only in synthetic form. iamonds are made of carbon and are excellent for grinding short-chipping materials. Owing to the fact that the carbon in diamond is incompatible with the carbon contained in steel, diamonds are unsuitable for working of steel. Applications ungsten carbide and tungsten carbide green compact, glass-fibre reinforced plastics, fibre-reinforced, duroplastics and thermoplastics, electrocarbon, ferrite, graphite, glass, rubber (diamond), high-speed steel, hardened steel, high alloy steels (boron nitride). Cutting speed: Approximately m/s Ñ Vacuum brazed bonding NEW! With this bonding type, the abrasive grits are directly fused with the carrier. he adhesion of the grits can thus be greatly improved. he grain protrusion results in a very high removal rate. Applications hese tools are particularly suited for glass fibre-reinforced materials and carbon-fibre reinforced plastic (in aircraft construction and iamond consists of carbon and is perfectly suited for grinding short-chipping materials. Because of an incompatibility of diamond carbon with the carbon in steel, diamond cannot be used for steel machining. Boron nitride contains no carbon and is optimally suitable for grinding different types of steel. he high level of hardness of diamond and boron nitride presents a number of advantages, such as a long service life, precise reproduction of shape and exact dimensions during the machining process. Ñ Resin bonding In resin bonding, the diamond or boron nitride grain is densely compressed over the entire coating. Synthetic materials with different properties are used as binders. he quantity of grains distributed over the abrasive coating is dependent on the concentration. his bonding is characterised by a low grinding temperature and high stock removal. It has established itself for tool grinding applications. It allows a high surface quality to be obtained. Concentration C50 and C75 as standard Applications ungsten carbide (diamond), high-speed steel, tool steel (boron nitride). Cutting speed: Approximately m/s i s FEPA standard U. S. Standard mesh (micron) tight loose tight loose / / / / / / / / / / /50 /B 56 45/ /B 01 50/ /B / /B /80 /B 21 70/ /B / /B / /B / /B / /B / /B / /B 64 20/ /B / /B 46 25/ coarse fine 270 el. +49 (0) / Fax +49 (0) / info@joke.de
4 . iamond and boron nitride tools iamond and boron nitride tools Interesting facts i Max. speed depending on cutting speed and tool diameter Ø m/s m/s m/s m/s m/s m/s m/s m/s m/s m/s m/s m/s m/s Ñ Concentration (for grinding discs with resin and metal bonding) he concentration is indicated in carat/cm. his value represents the ratio between the weight of the diamond/boron nitride and the coating volume. hree concentrations are generally proposed: C50, C75 and C100. he concentration C75 contains. carat per cm grinding layer. 1 carat = 0.2 g C ct 2.0 ct 2.2 ct.0 ct. ct 4.0 ct 4.4 ct 5.5 ct 6.6 ct Ñ /roughness ratio (for grinding discs with resin bonding) he table opposite shows the approximate possible surface roughness values that can be achieved with the various grits. he surface roughness is heavily influenced not only by the grit, but also by the grinding conditions, e.g. machine rigidity R a 0,05 0,1 0,2 0,4 0,8 1,6,2 el. +49 (0) / Fax +49 (0) / info@joke.de 271
5 . iamond and boron nitride tools iamond and boron nitride special tools Ñ For service beyond the call of duty. You have an aim, but not yet a solution. ñ We can develop the complete tool on your behalf - from the design/drafting stage, including manufacture of the blank, to coating. You already know your requirements, but are still not aware of the best possible, most economical solution. ñ You provide us with your drawing (or even just a sketch) and we will deal with the rest, right down to the ready-to-use tool. You already have a blank of the tool, or even a worn tool. recoend 126 as a medium grit for general grinding of metals and hard materials. s >56 should preferably not be used. Coarser diamond grits in the range of 181 to 602 can be used in plastic and rubber finishing. Fine and extremely fine grits can be used for special applications. Ñ Recoating of worn tools ools with galvanic bonding, like any other tools, are subject to natural wear and tear. Since the iobilisation time of a tool considerably affects the productivity of the working process and the price of the product to be manufactured, extending tool service life is a decisive factor. his is why our tools can be recoated several times. his is of value primarily when on the one hand, the proportion of expenditure for design and/or manufacture of the carrier has incurred a considerable percentage of the costs or when appropriately high numbers of the same tools exist. he prerequisite in this case is merely that the carrier remains free of defects in terms of true running and geometrical shape. ressing of a damaged carrier after the coating is lost is worthwhile only in exceptional cases, since in most cases, the requisite expenditure for repairs approximates that of a newly manufactured product. Coating thickness For a tolerated dimension in the coated area, account must be taken of the coating thickness when manufacturing the blank. Please contact our Product Manager Stefan Spiegel on all issues regarding (special) diamond tools: el. +49 (0) / s.spiegel@joke.de ñ We will rework the tool on your behalf and apply the necessary coating. Ñ Notes on manufacture of the carriers (blanks) Material: Blanks should preferably be made of low alloyed or unalloyed chromium-free steels, e.g. C 60, C 45, S 7, which guarantees optimum bonding between the galvanic layer and blank. Prerequisite: fine turning, milling or grinding are adequate machining operations for surfaces to be coated. It is important that all rotating tools are manufactured with optimum radial run-out, since generally, the tools can no longer be dressed after coating. Selection of the grit : It is advisable to select the grit as coarse as the desired surface quality allows. We 272 el. +49 (0) / Fax +49 (0) / info@joke.de
6 . iamond and boron nitride tools iamond and boron nitride special tools Ñ Embedding depth of grits he embedding depth is one of the essential elements to be observed during tool manufacture and has a direct effect on the properties and service life of the tool. epending on the application, the embedding depth must be designed differently in order to achieve both optimum finish (required surface quality) and guarantee optimum economy during tool use (long service life). Ñ ool design An optimum coating is a basic prerequisite for tool quality. In order to guarantee this, a number of different factors should be taken into account as early as the tool design stage: 1. Sharp edges and points in the coating area are unfavourable and should preferably be avoided. he corner radius of sharp-edged tools will be at least 1.5 x grit. his yields for example: Required grit 126 micron 126 x 1.5 = indicates the required minimum radius in this case. Mminimum radius R 0.19 max. galvanic irradiation depth 90 not advisable 2. Narrow penetrations, such as grooves, slots and deep profiles are very difficult or almost impossible to coat, since the irradiation of the galvanic process corresponds to an approximate 90 angle. Reliable results are obtained by divided tools. Ñ Favourable chip flow Particularly tools for plastic and rubber machining should have a good chip flow because of the large volume of chippings that accumulate in order to prevent overheating and clogging of the tools. Segmented coatings, bores, slots or grooves assist the chip flow and simultaneously achieve a cooling effect. In the case of larger, cylindrical tools, a spirally applied sectional coating yields a uniform cut without chatter. An additional, beneficial effect the costs for coating and recoating are reduced. In order to reduce the coating surfaces, the tool is preferably to be provided with V-shaped grooves, e.g. with a thread cutting chisel. epending on the wall thickness of the carrier, divided = good inadvisable good el. +49 (0) / Fax +49 (0) / info@joke.de 27
7 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points iamond/boron nitride tools Strong bonding - best performance Ñ Galvanic bonding he abrasive is laid onto a nickel layer Ñ iamond and boron nitride grinding points are available in four different bonding types. Standard is the galvanic bonding, where a layer of abrasives are laid onto the carrier. Furthermore, we offer tools with metal and resin bonding, where the diamond grains are completely imbedded into the bonding. NEW in the range: the vacuum brazed (vb) bonding. With this bonding, the grain is directly fused with the carrier, which results in even better durability and outstanding cutting performance. Ñ You will find: iamond grinding points Shank Ø 1.6 from page 275 Shank Ø 2.5 from page 276 Shank Ø from page 280 Shank Ø 6 from page 290 Ñ Metal/resin bonding boron nitride grinding points Shank Ø from page 297 Shank Ø 6 from page 02 iamond deburring tools from page 04 iamond spring steel wires from page 07 he diamonds are completely imbedded in the bonding iamond grinding discs and sheets from page 08 iamond dressers from page 14 Ñ vacuum brazed bonding NEW! Our special advice iamond abrasive sheets and foils from page 17 iamond point IAIP Order No. he grain is directly fused with the carrier he secret weapon for rib machining. hanks to a long coating and small diameter, you can reach the deepest ribs. Skins to be eroded are easily torn open, erodible points removed safely. You therefore use less time with the following processing steps. Overall length 66 Coating length 50 Shank Ø Cone radius 2.5 Grain el. +49 (0) / Fax +49 (0) / info@joke.de
8 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points Precision diamond grinding points shank Ø 1.6 i Minimum order amount: 5 units Ñ Precision diamond grinding points hese points are the perfect partner for our high-speed handpiece P 20 and the handpieces of the ENESKA systems -1 and 4-1. Areas of use Casting alloys Precious metal alloys Ceramic Plastics i Minimum order amount: 5 units Precision diamond grinding points, galvanic bonding, shank Ø 1.6 Shape i Woking Ø of the tool Head dimensions Max. perm. rpm Shank Ø x total length 450,000 rpm 450,000 rpm 450,000 rpm 00,000 rpm 160,000 rpm 140,000 rpm 120,000 rpm 95,000 rpm 60,000 rpm 45,000 rpm Recoended rpm Order No. Cylinder Ø 1.0 x 4.0 Ø 1.6 x Ø 1.0 x 4.0 Ø 1.6 x Ø 1.8 x 4.0 Ø 1.6 x Ø 1.8 x 4.0 Ø 1.6 x Round cylinder Ø 1.0 x 4.0 Ø 1.6 x Ø 1.4 x 4.0 Ø 1.6 x Ø 1.4 x 4.0 Ø 1.6 x Sphere Ø 1.0 Ø 1.6 x Ø 1.0 Ø 1.6 x Ø 1.6 Ø 1.6 x Ø 1.6 Ø 1.6 x Ø 1.8 Ø 1.6 x Ø 2.1 Ø 1.6 x Ø 2.1 Ø 1.6 x Wheel Ø 1.8 x 0.7 Ø 1.6 x Ø 4.70 x 0.50 Ø 1.6 x Round nose Ø 1.2 x 10.0 Ø 1.6 x Ø 1.2 x 10.0 Ø 1.6 x Ø 1.6 x 10.0 Ø 1.6 x Ø 1.4 x 11.5 Ø 1.6 x Ø 1.6 x 10.0 Ø 1.6 x Pointed cone Ø 1.2 x 8.0 Ø 1.6 x Pear-shape Ø 1.0 x 2.0 Ø 1.6 x i All measurements in Ø 1.0 x 2.0 Ø 1.6 x , ,000 rpm 70, ,000 rpm 55, ,000 rpm 40, ,000 rpm 5, ,000 rpm 0,000-95,000 rpm 25,000-75,000 rpm 15,000-60,000 rpm 12,000-40,000 rpm 10,000-20,000 rpm i Recoendations for the use of these precision grinding points: Always observe recoended rotation speed Avoid excess grinding pressure Bring grinding tools to working speed before use o not use damaged and/or blunt tools Avoid getting jaed and leveraging Sets Order No. Set price Set diamond grinding points, Contents: 12 units Set diamond grinding points, Contents: 12 units el. +49 (0) / Fax +49 (0) / info@joke.de 275
9 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points IPROFIL precision diamond grinding points shank Ø 2.5 i Vrecom. = m/s (head-ø > 10 Vmax. = 20 m/s) max. extension length 25 Original IPROFIL IPROFIL diamond grinding points, galvanic bonding, shank Ø 2.5 Head dimensions /1 x Neck dimensions d x L1 Angle Radius R Shank Ø x total length Cylinder Ø 1.4 x 7.0 Ø 1.1 x Ø 2.5 x d Ø 1.7 x 5.0 Ø 1.4 x Ø 2.5 x Ø 1.9 x 5.0 Ø 1.7 x Ø 2.5 x Ø 2.2 x 7.0 Ø 1.4 x Ø 2.5 x Ø 2.5 x 7.0 Ø 2.2 x Ø 2.5 x Ø 2.6 x.0 Ø 1.7 x Ø 2.5 x Ø 5.9 x Ø 2.5 x Sphere Ø 0.8 Ø 0.5 x Ø 2.5 x d L1 L1 Ø 1. Ø 1.0 x Ø 2.5 x Ø 1.7 Ø 1.0 x Ø 2.5 x Ø 1.9 Ø 1.2 x Ø 2.5 x Ø 2.5 Ø 1.6 x Ø 2.5 x Ø.0 Ø 1.9 x Ø 2.5 x Ø 4.1 Ø 1.9 x Ø 2.5 x Ø Ø 2.5 x Ø Ø 2.5 x Order No. from 10 pieces from 1 piece Lens Ø 4.1 x Ø 2.5 x Ø 5.8 x Ø 2.5 x Ø 9. x Ø 2.5 x Wheel Ø 4.2 x Ø 2.5 x Ø 6. x Ø 2.5 x Ø 6.4 x Ø 2.5 x Ø 8.7 / 7 x Ø 2.5 x Ø 9 / 7 x Ø 2.5 x Ø 12.9 / 9.5 x Ø 2.5 x Ø 17.2 / 14.6 x Ø 2.5 x Ø 20 / x Ø 2.5 x Rounded wheel Ø 5.8 x Ø 2.5 x R Ø 9.8 x Ø 2.5 x Wheel with front screw Ø 15 / 1 x Ø 2.5 x Ø 18 / 16 x Ø 2.5 x Ø 22 / 18 x Ø 2.5 x Ø 22 / 20 x Ø 2.5 x Wheel, front coated Ø 15 / 7 x Ø 2.5 x Ø 20 / 7 x Ø 2.5 x i All measurements in 276 el. +49 (0) / Fax +49 (0) / info@joke.de
10 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points Original IPROFIL IPROFIL precision diamond grinding points shank Ø 2.5 i Vrecom. = m/s (head-ø > 10 Vmax. = 20 m/s) max. extension length 25 IPROFIL diamond grinding points, galvanic bonding, shank Ø 2.5 Head dimensions /1 x Neck dimensions d x L1 Angle Radius R Shank Ø x total length Pointed arch Ø 1. x Ø 2.5 x R Ø 1.6 x Ø 2.5 x Ø 1.6 x Ø 2.5 x Ø 2.4 x Ø 2.5 x Ø 2.4 x Ø 2.5 x Order No. from 10 pieces from 1 piece Cone Ø 1. / 0.7 x Ø 2.5 x Ø 2.6 / 1.5 x Ø 2.5 x Ø 2.6 / 1.75 x Ø 2.5 x Pointed cone Ø.1 x Ø 2.5 x Ø 4. x Ø 2.5 x Ø 5.1 x Ø 2.5 x Ø 7. x Ø 2.5 x Round cone Ø 1. / 0.7 x Ø 2.5 x Ø 1.6 / 0.8 x Ø 2.5 x Ø 1.9 / 1.1 x Ø 2.5 x rapeze Ø 1. x 1. Ø 0.9 x Ø 2.5 x d L1 i All measurements in NEW! iamond grinding point set shank Ø 2.5 Ñ iamond grinding point set With this set, you will always have the right diamond grinding point at hand at an unbeatable price. he set contains 0 points in spherical, trapeze, pointed cone, round cone, pointed arch, flame, lens and wheel shapes. 107 for head Ø up to for head Ø more than 2.5 iamond grinding point set (0 pieces), shank Ø 2.5 Order No. Set price he set contains 0 diamond grinding points in spherical, trapeze, pointed cone, round cone, pointed arch, flame, lens and wheel shapes el. +49 (0) / Fax +49 (0) / info@joke.de 277
11 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points Precision diamond grinding points shank Ø 2.5 i Vrecom. = m/s max. extension length = 0.5 x L NEW! iamond grinding points, galvanic bonding, shank Ø 2.5 Head dimensions /1 x Angle Shank Ø x total length Order No. Cylinder L1 Ø 1.6 x Ø 2.5 x HP d Ø 1.9 x Ø 2.5 x HP Ø 2.5 x Ø 2.5 x HP Ø.5 x Ø 2.5 x HP Sphere d Ø Ø 2.5 x HP L1 Ø Ø 2.5 x HP Ø Ø 2.5 x HP Ø Ø 2.5 x HP Wheel Ø 5. x Ø 2.5 x HP 1 Ø 5.4 x Ø 2.5 x HP Ø 6.4 x Ø 2.5 x HP Wheel with front screw Ø 22 x 0. - Ø 2.5 x HP 1 Ø 22 x 0. - Ø 2.5 x HP Ø 22 x Ø 2.5 x HP Ø 22 x Ø 2.5 x HP Cone Ø 1.6 / 1.0 x Ø 2.5 x HP 1 Ø 2.1 / 1. x Ø 2.5 x HP Ø 2.1 / 1.7 x Ø 2.5 x HP Pointed cone Ø 2.5 / 2.5 x Ø 2.5 x HP Ø 5.1 / 2.5 x Ø 2.5 x HP Round cone Ø.4 / 2.6 x Ø 2.5 x HP rapeze d Ø 1.5 / 1. x Ø 2.5 x HP L1 1 Ø 2. / 1.9 x Ø 2.5 x HP Ø 2.6 / 2.1 x Ø 2.5 x HP Ø. / 2.5 x Ø 2.5 x HP rapeze, outline coated Ø 6.2 / 2.5 x.1 75 Ø 2.5 x HP Ø 8.2 / 2.5 x Ø 2.5 x HP rapeze, front coated Ø 6.4 / 2.5 x Ø 2.5 x HP Ø 9.4 / 2.5 x Ø 2.5 x HP R Pointed arch Ø 2.2 x Ø 2.5 x HP Lens Ø 6.1 x 2. - Ø 2.5 x HP i All measurements in 278 el. +49 (0) / Fax +49 (0) / info@joke.de
12 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points NEW! iamond grinding points with metal bonding shank Ø 2.5 Ñ iamond grinding point with metal bonding hese sintered grinding points are interspersed with diamonds. hey convince through their durability and good edge stability. hese points achieve fine surfaces on glass, ceramic and other short-chipping materials. i Nrecom. = 20,000 25,000 rpm iamond grinding points, metal bonding, shank Ø 2.5 Head dimensions /1 x Shank Ø x total length Cylinder L1 Ø 2.7 x 8.0 Ø 2.5 x d Round cylinder Ø 2.1 x 7.0 Ø 2.5 x R Ø.1 x 9.0 Ø 2.5 x Order No. Sphere Ø 2.1 Ø 2.5 x d L1 Ø.5 Ø 2.5 x Wheel Ø 8.0 x 1.0 Ø 2.5 x Wheel with front screw Ø 8.0 x 0.5 Ø 2.5 x Ø 22.0 x 0.5 Ø 2.5 x Pointed cone Ø.1 x 9.0 Ø 2.5 x Round cone Ø.1 x 8.5 Ø 2.5 x rapeze Ø 1.8 / 1. x 2.5 Ø 2.5 x d L1 Ø.7 / 2.2 x 2.5 Ø 2.5 x Pointed arch Ø 1.6 x 6.0 Ø 2.5 x R Ø.1 x 8.0 Ø 2.5 x i All measurements in Cleaning stone Order No. In order to keep the cutting edge of the sintered diamond points clean and therefore sharp, the points should be passed over this stone regularly el. +49 (0) / Fax +49 (0) / info@joke.de 279
13 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points IPROFIL precision diamond grinding points shank Ø i Vrecom. = m/s (head-ø > 10 Vmax. = 20 m/s) max. extension length 25 Original IPROFIL IPROFIL diamond grinding points, galvanic bonding, shank Ø Head dimensions /1 x Neck dimensions d x L1 Angle Radius R Shank Ø x total length Cylinder Ø 0.8 x 4.0 Ø 0.5 x Ø x d L1 Ø 1.0 x 4.0 Ø 0.6 x Ø x Ø 1.5 x 4.0 Ø 1.2 x Ø x Ø 2.0 x 5.0 Ø 1.6 x Ø x Ø 2.0 x 5.0 Ø 1.6 x Ø x Ø 2.5 x 5.0 Ø 2.1 x Ø x Ø 2.5 x 7.0 Ø 2.1 x Ø x Ø.0 x 5.0 Ø 2.6 x Ø x Ø.0 x 5.0 Ø 2.6 x 21 Ø x Ø.5 x Ø x Ø 4.0 x Ø x Ø 4.5 x Ø x Ø 5.0 x Ø x Ø 5.5 x Ø x Ø 6.0 x Ø x Ø 6.0 x Ø x Order No. å ç å ç Sphere Ø 1.7 Ø 1 x Ø x d L1 Ø 1.7 Ø 1 x Ø x Ø 2.1 Ø 1. x Ø x Ø 2.5 Ø 1.5 x Ø x Ø Ø 1.5 x Ø x Ø Ø 1.5 x Ø x Ø 4.1 Ø 1.8 x Ø x Ø Ø x Ø Ø x å ç å ç Lens Ø 4.1 x 1. Ø 1.8 x 5-60 Ø x Ø 9. x Ø x Wheel Ø 7. x Ø x Ø 9 / 7 x Ø x Ø 17.2 / 14.6 x Ø x Ø 20 / x Ø x Ø 22 / 20 x Ø x Wheel, rounded R Ø 5.8 x Ø x Ø 9.8 x Ø x Wheel, front coated Ø 22 / 7 x Ø x i All measurements in 280 el. +49 (0) / Fax +49 (0) / info@joke.de
14 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points Original IPROFIL IPROFIL precision diamond grinding points shank Ø i Vrecom. = m/s (head-ø > 10 Vmax. = 20 m/s) max. extension length 25 IPROFIL diamond grinding points, galvanic bonding, shank Ø Head dimensions /1 x Neck dimensions d x L1 Angle Radius R Shank Ø x total length Pointed arch Ø 1.6 x Ø x R Ø 1.6 x Ø x Ø 1.6 x Ø x Ø 2.4 x Ø x Ø 2.4 x Ø x Ø 2.4 x Ø x Ø 6.0 x Ø x Cone Ø 1.6 / 0.9 x Ø x Ø 2.1 / 1.4 x Ø x Ø 2.1 / 1.4 x Ø x Ø 2.6 / 1.75 x Ø x Order No. å ç å ç Pointed cone Ø.1 x 5.0 Ø 1.8 x Ø x Ø.1 x 5.0 Ø 1.8 x Ø x Ø 7.0 x Ø x Ø 8.0 x Ø x Ø 8.0 x Ø x Ø 8.0 x Ø x å ç ç å Round cone Ø 1. / 0.7 x Ø x Ø 1.6 / 0.8 x Ø x Ø 1.9 / 1.1 x Ø x Ø 1.9 / 1.1 x Ø x å ç rapeze Ø 2.4 x.0 Ø 1.5 x Ø x d L1 Ø 2.4 x.0 Ø 1.5 x Ø x Ø 6.5 x Ø x å ç rapeze, outline coated Ø 8.0 x Ø x Barrel Ø 7.0 x Ø x R rop Ø 6.0 x Ø x R Round cylinder Ø 6.0 x Ø x R i All measurements in å ç = also available in a set (see following page)! el. +49 (0) / Fax +49 (0) / info@joke.de 281
15 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points IPROFIL diamond grinding point sets shank Ø i Vrecom. = m/s (head-ø > 10 Vmax. = 20 m/s) max. extension length 25 IPROFIL diamond grinding point sets Order No. Set price å IPROFIL diamond grinding point set, 10 pieces ç IPROFIL diamond grinding point set, 10 pieces iamond grinding point set shank Ø NEW! Ñ iamond grinding point set With this set, you will always have the right diamond grinding point at hand at an unbeatable price. 107 for head Ø up to for head Ø more than 2.5 iamond grinding point set (0 pieces), shank Ø he set contains diamond grinding points in cylinder, rounded cylinder, sphere, trapeze, round cone, pointed arch and pointed cone shapes. Order No el. +49 (0) / Fax +49 (0) / info@joke.de
16 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points NEW! Precision diamond grinding points shank Ø i Vrecom. = m/s max. extension length = 0.5 x L Precision diamond grinding points, galvanic bonding, shank Ø Head dimensions /1 x Angle Shank Ø x total length Order No. Cylinder L1 Ø 1.6 x Ø x d Ø 1.9 x Ø x Ø 2.5 x Ø x Ø.5 x Ø x d Sphere Ø Ø x L1 Ø Ø x Ø Ø x Ø Ø x Wheel Ø 5. x Ø x Ø 5.4 x Ø x Ø 6.4 x Ø x Wheel with front screw Ø 22.0 x 0. - Ø x Ø 22.0 x 0. - Ø x Ø 22.0 x Ø x Ø 22.0 x Ø x Cone Ø 1.6 / 1 x Ø x Ø 2.1 / 1. x Ø x Ø 2.1 / 1.7 x Ø x Pointed cone Ø 2.5 x Ø x Ø 5.1 x Ø x Round cone Ø.4 / 2.6 x Ø x rapeze Ø 1.5 / 1. x Ø x d L1 1 Ø 2. / 1.9 x Ø x Ø 2.6 / 2.1 x Ø x Ø. / 2.5 x Ø x rapeze, outline coated Ø 6.2 / x.1 75 Ø x Ø 8.2 / x 4 75 Ø x rapeze, front coated Ø 6.4 / x Ø x Ø 9.4 / x Ø x R Pointed arch Ø 2.2 x Ø x Ø 6.1 x 2. - Ø x i All measurements in el. +49 (0) / Fax +49 (0) / info@joke.de 28
17 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points iamond grinding points shank Ø i Vrecom. wet = m/s Vrecom. dry = m/s max. max. extension length = 0.5 x L, shaft tolerance = h6, head tolerance = ± 0.2 iamond grinding points, galvanic bonding, shank Ø Head dimensions x Neck dimensions d x L1 Shank Ø x total length Cylinder Ø 0.4 x 2.0 Ø 0. x 5 Ø x d L1 Ø 0.5 x 2.0 Ø 0.4 x 5 Ø x Order No. Ø 0.5 x.0 Ø 0.4 x 7 Ø x Ø 0.6 x 2.0 Ø 0.5 x 5 Ø x Ø 0.6 x Ø 0.5 x 7 Ø x Ø 0.8 x 2.0 Ø 0.6 x 7 Ø x Ø 0.8 x 2.0 Ø 0.6 x 7 Ø x Ø 0.8 x 4.0 Ø 0.6 x 10 Ø x Ø 1.0 x 2.0 Ø 0.7 x 7 Ø x Ø 1.0 x 2.0 Ø 0.7 x 7 Ø x Ø 1.0 x 5.0 Ø 0.7 x 10 Ø x Ø 1.0 x 5.0 Ø 0.7 x 10 Ø x Ø 1.5 x 5.0 Ø 1.2 x 12 Ø x Ø 1.5 x 5.0 Ø 1.2 x 12 Ø x Ø 2.0 x 5.0 Ø 1.7 x 12 Ø x Ø 2.0 x 5.0 Ø 1.7 x 12 Ø x Ø 2.0 x 5.0 Ø 1.7 x 12 Ø x Ø 2.5 x 5.0 Ø 2.2 x 16 Ø x Ø 2.5 x 5.0 Ø 2.2 x 16 Ø x Ø 2.5 x 5.0 Ø 2.2 x 16 Ø x Ø.0 x 5.0 Ø 2.7 x 16 Ø x Ø.0 x 5.0 Ø 2.7 x 16 Ø x Ø.0 x 5.0 Ø 2.7 x 16 Ø x Ø.5 x Ø x Ø.5 x Ø x Ø.5 x Ø x Ø 4.0 x Ø x Ø 4.0 x Ø x Ø 4.0 x Ø x i All measurements in 284 el. +49 (0) / Fax +49 (0) / info@joke.de
18 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points i iamond grinding points shank Ø Vrecom. wet = m/s Vrecom. dry = m/s max. max. extension length = 0.5 x L, shaft tolerance = h6, head tolerance = ± 0.2 iamond grinding points, galvanic bonding, shank Ø Head dimensions x Neck dimensions d x L1 Shank Ø x total length Ø 4.5 x Ø x Ø 4.5 x Ø x Ø 4.5 x Ø x Order No. Ø 5.0 x Ø x Ø 5.0 x Ø x Ø 5.0 x Ø x Ø 6.0 x Ø x Ø 6.0 x Ø x Ø 6.0 x Ø x Sphere Ø Ø x d Ø Ø x Ø 1.0 L1 - Ø x Ø Ø x NEW! Ø Ø x Ø Ø x Ø Ø x Ø Ø x Ø Ø x Ø Ø x NEW! Ø Ø x Ø Ø x Ø.0 - Ø x Ø.0 - Ø x Ø.0 - Ø x Ø Ø x Ø Ø x Ø Ø x Ø Ø x Ø Ø x Ø Ø x NEW! Ø Ø x Ø Ø x Ø Ø x i All measurements in el. +49 (0) / Fax +49 (0) / info@joke.de 285
19 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points iamond grinding points, solid tungsten carbide shank Ø NEW! Ñ iamond grinding points, solid tungsten carbide he new diamond grinding points made from solid tungsten carbide convince through their high rigidity and the resulting precise true running. hey are available in ascending increments of 1/10 with a head diameter from 0.4 to.0. i Suitable for every measure hese grinding points are available in increments of 1/10 between 0.4 and.0 diameter. You are sure to find the right one for your application! iamond grinding points, solide tungsten carbide, galvanic bonding, shank Ø Head dimensions x Neck dimensions d x L1 Shank Ø x total length Cylinder Ø 0.4 x 2.0 Ø 0. x Ø x d L1 Ø 0.5 x 2.0 Ø 0.4 x Ø x Ø 0.6 x.0 Ø 0.5 x 5 Ø x Ø 0.6 x.0 Ø 0.4 x 5 Ø x Ø 0.7 x.0 Ø 0.6 x 6 Ø x Ø 0.7 x.0 Ø 0.5 x 6 Ø x Ø 0.8 x.0 Ø 0.7 x 6 Ø x Ø 0.8 x.0 Ø 0.6 x 6 Ø x Ø 0.9 x.0 Ø 0.8 x 7 Ø x Ø 0.9 x.0 Ø 0.7 x 7 Ø x Ø 1.0 x.0 Ø 0.8 x 7 Ø x Ø 1.0 x.0 Ø 0.7 x 7 Ø x Ø 1.0 x.0 Ø 0.7 x 7 Ø x Ø 1.1 x.0 Ø 0.9 x 8 Ø x Ø 1.1 x.0 Ø 0.8 x 8 Ø x Ø 1.1 x.0 Ø 0.8 x 8 Ø x Ø 1.2 x.0 Ø 1.0 x 8 Ø x Ø 1.2 x.0 Ø 0.9 x 8 Ø x Ø 1.2 x.0 Ø 0.9 x 8 Ø x Ø 1. x.0 Ø 1.1 x 8 Ø x Ø 1. x.0 Ø 1.0 x 8 Ø x Ø 1. x.0 Ø 1.0 x 8 Ø x Ø 1.4 x.0 Ø 1.2 x 8 Ø x Ø 1.4 x.0 Ø 1.1 x 8 Ø x Ø 1.4 x.0 Ø 1.1 x 8 Ø x Ø 1.5 x.0 Ø 1. x 15 Ø x Ø 1.5 x.0 Ø 1.2 x 15 Ø x Ø 1.5 x.0 Ø 1.2 x 15 Ø x Ø 1.6 x 4.0 Ø 1.4 x 15 Ø x Ø 1.6 x 4.0 Ø 1. x 15 Ø x Ø 1.6 x 4.0 Ø 1. x 15 Ø x Ø 1.7 x 4.0 Ø 1.5 x 15 Ø x Ø 1.7 x 4.0 Ø 1.4 x 15 Ø x Ø 1.7 x 4.0 Ø 1.4 x 15 Ø x i All measurements in Order No. 286 el. +49 (0) / Fax +49 (0) / info@joke.de
20 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points NEW! iamond grinding points, solid tungsten carbide shank Ø iamond grinding points, solide tungsten carbide, galvanic bonding, shank Ø Head dimensions x Neck dimensions d x L1 Shank Ø x total length Ø 1.8 x 4.0 Ø 1.6 x 15 Ø x Order No. Ø 1.8 x 4.0 Ø 1.5 x 15 Ø x Ø 1.8 x 4.0 Ø 1.5 x 15 Ø x d L1 Ø 1.9 x 4.0 Ø 1.7 x 15 Ø x Ø 1.9 x 4.0 Ø 1.6 x 15 Ø x Ø 1.9 x 4.0 Ø 1.6 x 15 Ø x Ø 2.0 x 5.0 Ø 1.8 x 15 Ø x Ø 2.0 x 5.0 Ø 1.7 x 15 Ø x Ø 2.0 x 5.0 Ø 1.7 x 15 Ø x Ø 2.1 x 5.0 Ø 1.9 x 15 Ø x Ø 2.1 x 5.0 Ø 1.8 x 15 Ø x Ø 2.1 x 5.0 Ø 1.8 x 15 Ø x Ø 2.2 x 5.0 Ø 2.0 x 15 Ø x Ø 2.2 x 5.0 Ø 1.9 x 15 Ø x Ø 2.2 x 5.0 Ø 1.9 x 15 Ø x Ø 2. x 5.0 Ø 2.1 x 15 Ø x Ø 2. x 5.0 Ø 2.0 x 15 Ø x Ø 2.4 x 5.0 Ø 2.2 x 15 Ø x Ø 2.4 x 5.0 Ø 2.1 x 15 Ø x Ø 2.4 x 5.0 Ø 2.1 x 15 Ø x Ø 2.5 x 5.0 Ø 2. x 16 Ø x Ø 2.5 x 5.0 Ø 2.2 x 16 Ø x Ø 2.5 x 5.0 Ø 2.2 x 16 Ø x Ø 2.6 x 5.0 Ø 2.4 x 16 Ø x Ø 2.6 x 5.0 Ø 2. x 16 Ø x Ø 2.6 x 5.0 Ø 2. x 16 Ø x Ø 2.7 x 5.0 Ø 2.5 x 16 Ø x Ø 2.7 x 5.0 Ø 2.4 x 16 Ø x Ø 2.7 x 5.0 Ø 2.4 x 16 Ø x Ø 2.8 x 5.0 Ø 2.6 x 16 Ø x Ø 2.8 x 5.0 Ø 2.5 x 16 Ø x Ø 2.8 x 5.0 Ø 2.5 x 16 Ø x Ø 2.9 x 5.0 Ø 2.7 x 16 Ø x Ø 2.9 x 5.0 Ø 2.6 x 16 Ø x Ø 2.9 x 5.0 Ø 2.6 x 16 Ø x Ø.0 x 5.0 Ø 2.8 x 17 Ø x Ø.0 x 5.0 Ø 2.7 x 17 Ø x Ø.0 x 5.0 Ø 2.7 x 17 Ø x i All measurements in el. +49 (0) / Fax +49 (0) / info@joke.de 287
21 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points iamond grinding points with tungsten carbide shank shank Ø Ñ iamond grinding points with tungsten carbide shank Extra long for special grinding tasks in deep bores etc. iamond grinding points with tungsten carbide shank, galvanic bonding, shank Ø Head dimensions x Shank Ø x total length Order No. Cylinder Ø 5.0 x 5.0 Ø x Ø 5.0 x 5.0 Ø x Ø 5.0 x 5.0 Ø x Ø 6.0 x 6.0 Ø x Ø 6.0 x 6.0 Ø x Ø 6.0 x 6.0 Ø x Ø 7.0 x 6.0 Ø x Ø 7.0 x 6.0 Ø x Ø 7.0 x 6.0 Ø x Ø 8.0 x 6.0 Ø x Ø 8.0 x 6.0 Ø x Ø 8.0 x 6.0 Ø x Sphere Ø 5.0 Ø x Ø 5.0 Ø x Ø 5.0 Ø x i Benefits of diamond grinding points with tungsten carbide shank Ø 6.0 Ø x Ø 6.0 Ø x Ø 6.0 Ø x High rigidity Extra long Low vibration Ø 7.0 Ø x Ø 7.0 Ø x Ø 7.0 Ø x Ø 8.0 Ø x Ø 8.0 Ø x Ø 8.0 Ø x Illustration approx. original i All measurements in 288 el. +49 (0) / Fax +49 (0) / info@joke.de
22 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points Image: Manfred Esser Stefan Spiegel Ñ Everything extra-ordinary. his is probably the best description of our Product Manager Stefan Spiegel. He has almost at least as many hobbies and talents as there are JOKE product groups. He is responsible for diamond tools, workplace systems, milling tools and lapping and polishing technology. He treats these with the same passion as he tackles each bend on his moped. Because he likes to ride at high speed just like his diamond tools. el. +49 (0) / Fax +49 (0) / info@joke.de 289
23 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points iamond grinding points shank Ø 6 i Vrecom. = m/s (head-ø > 10 Vmax. = 20 m/s) max. extension length 0.5 L shank tolerance = h6, head tolerance = ± 0.2 iamond grinding points, galvanic bonding, shank Ø 6 Head dimensions x Neck measurement d x L1 Angle Radius R Shank Ø x total length Cylinder NEW! Ø 2.0 x 4.0 Ø 1.7 x Ø 6 x d L1 Ø 2.0 x 4.0 Ø 1.7 x Ø 6 x Ø 2.0 x 4.0 Ø 1.7 x Ø 6 x Order No. Ø.0 x 5.0 Ø 2.7 x Ø 6 x Ø.0 x 5.0 Ø 2.7 x Ø 6 x Ø.0 x 5.0 Ø 2.7 x Ø 6 x Ø 4.0 x 7.0 Ø.7 x Ø 6 x Ø 4.0 x 7.0 Ø.7 x Ø 6 x Ø 4.0 x 7.0 Ø.7 x Ø 6 x Ø 5.0 x 7.0 Ø 4.7 x Ø 6 x Ø 5.0 x 7.0 Ø 4.7 x Ø 6 x Ø 5.0 x 7.0 Ø 4.7 x Ø 6 x NEW! Ø 6.0 x 8.0 Ø 5.7 x Ø 6 x Ø 6.0 x 8.0 Ø 5.7 x Ø 6 x Ø 6.0 x 8.0 Ø 5.7 x Ø 6 x Ø 6.0 x Ø 6 x Ø 6.0 x Ø 6 x Ø 6.0 x Ø 6 x Ø 8.0 x Ø 6 x Ø 8.0 x Ø 6 x Ø 8.0 x Ø 6 x Ø 10.0 x Ø 6 x Ø 10.0 x Ø 6 x Ø 10.0 x Ø 6 x Ø 10.0 x Ø 6 x Ø 10.0 x Ø 6 x Ø 10.0 x Ø 6 x Ø 10.0 x Ø 6 x Ø 10.0 x Ø 6 x Ø 10.0 x Ø 6 x Ø 12.0 x Ø 6 x Ø 12.0 x Ø 6 x Ø 12.0 x Ø 6 x i All measurements in 290 el. +49 (0) / Fax +49 (0) / info@joke.de
24 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points iamond grinding points shank Ø 6 i Vrecom. = m/s (head-ø > 10 Vmax. = 20 m/s) max. extension length 0.5 L shank tolerance = h6, head tolerance = ± 0.2 iamond grinding points, galvanic bonding, shank Ø 6 Head dimensions x Neck measurement d x L1 Angle Radius R Shank Ø x total length Ø 12.0 x Ø 6 x Ø 12.0 x Ø 6 x Ø 12.0 x Ø 6 x Order No. Ø 15.0 x Ø 6 x Ø 15.0 x Ø 6 x Ø 15.0 x Ø 6 x Ø 15.0 x Ø 6 x Ø 15.0 x Ø 6 x Ø 15.0 x Ø 6 x Ø 15.0 x Ø 6 x Sphere Ø Ø 6 x Ø Ø 6 x Ø Ø 6 x Ø Ø 6 x Ø Ø 6 x Ø Ø 6 x Ø Ø 6 x Ø Ø 6 x Ø Ø 6 x Ø Ø 6 x Ø Ø 6 x Ø Ø 6 x Ø Ø 6 x Ø Ø 6 x Ø Ø 6 x Pointed cone NEW! Ø 6.0 x Ø 6 x Ø 6.0 x Ø 6 x NEW! Ø 6.0 x Ø 6 x Ø 6.0 x Ø 6 x continued on page 292 Ø 6.0 x Ø 6 x Ø 6.0 x Ø 6 x i All measurements in el. +49 (0) / Fax +49 (0) / info@joke.de 291
25 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points iamond grinding points shank Ø 6 i Vrecom. = m/s (head-ø > 10 Vmax. = 20 m/s) max. extension length 0.5 L shank tolerance = h6, head tolerance = ± 0.2 iamond grinding points, galvanic bonding, shank Ø 6 Head dimensions x Neck measurement d x L1 Angle Radius R Shank Ø x total length Pointed cone (continued) Ø 6.0 x Ø 6 x Ø 6.0 x Ø 6 x Order No. Ø 6.0 x Ø 6 x Ø 6.0 x Ø 6 x Ø 6.0 x Ø 6 x Ø 10.0 x Ø 6 x Ø 10.0 x Ø 6 x Ø 10.0 x Ø 6 x Ø 18.0 x Ø 6 x Ø 18.0 x Ø 6 x Ø 18.0 x Ø 6 x Ø 24.0 x Ø 6 x Ø 24.0 x Ø 6 x Ø 24.0 x Ø 6 x Ø 10.0 x Ø 6 x Ø 10.0 x Ø 6 x Ø 10.0 x Ø 6 x Ø 15.0 x Ø 6 x Ø 15.0 x Ø 6 x Ø 15.0 x Ø 6 x Ø 20.0 x Ø 6 x Ø 20.0 x Ø 6 x Ø 20.0 x Ø 6 x Ø 10.0 x Ø 6 x Ø 10.0 x Ø 6 x Ø 10.0 x Ø 6 x Ø 20.0 x Ø 6 x Ø 20.0 x Ø 6 x Ø 20.0 x Ø 6 x Ø 0.0 x Ø 6 x Ø 0.0 x Ø 6 x Ø 0.0 x Ø 6 x i All measurements in 292 el. +49 (0) / Fax +49 (0) / info@joke.de
26 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points iamond grinding points shank Ø 6 i Vrecom. = m/s (head-ø > 10 Vmax. = 20 m/s) max. extension length 0.5 L shank tolerance = h6, head tolerance = ± 0.2 iamond grinding points, galvanic bonding, shank Ø 6 Head dimensions x Neck measurement d x L1 Angle Radius R Shank Ø x total length rapez Ø 20.0 x Ø 6 x Ø 20.0 x Ø 6 x Order No. Ø 0.0 x Ø 6 x Ø 0.0 x Ø 6 x Round barrel Ø 6.0 x Ø 6 x Ø 6.0 x Ø 6 x R Ø 10.0 x Ø 6 x Ø 10.0 x Ø 6 x Ø 15.0 x Ø 6 x Ø 15.0 x Ø 6 x i All measurements in el. +49 (0) / Fax +49 (0) / info@joke.de 29
27 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points iamond grinding points with tungsten carbide shank shank Ø 6 Ñ iamond grinding points with tungsten carbide shank Extra long for special grinding tasks in deep bores etc. iamond grinding points with tungsten carbide shaft, galvanic bonding, shank Ø 6 Head dimensions x Shank Ø x total length Order No. Cylinder Ø 8.0 x 6.0 Ø 6 x Ø 8.0 x 6.0 Ø 6 x Ø 8.0 x 6.0 Ø 6 x Ø 10.0 x 8.0 Ø 6 x Ø 10.0 x 8.0 Ø 6 x Ø 10.0 x 8.0 Ø 6 x Ø 12.0 x 8.0 Ø 6 x Ø 12.0 x 8.0 Ø 6 x Ø 12.0 x 8.0 Ø 6 x Ø 15.0 x 8.0 Ø 6 x Ø 15.0 x 8.0 Ø 6 x Ø 15.0 x 8.0 Ø 6 x Sphere Ø 8.0 Ø 6 x Ø 8.0 Ø 6 x Ø 8.0 Ø 6 x i Benefits of diamond grinding points with tungsten carbide shank High rigidity Extra length Low vibration Ø 10.0 Ø 6 x Ø 10.0 Ø 6 x Ø 10.0 Ø 6 x Ø 12.0 Ø 6 x Ø 12.0 Ø 6 x Ø 12.0 Ø 6 x Ø 15.0 Ø 6 x Ø 15.0 Ø 6 x Ø 15.0 Ø 6 x i All measurements in 294 Illustration approx. original el. +49 (0) / Fax +49 (0) / info@joke.de
28 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points NEW! iamond grinding points vacuum brazed bonding Ñ iamond grinding points vacuum brazed bonding he new vacuum brazed bonding provides a much better adhesion of grits to the carrier thanks to direct fusing. hese tools are particularly suited for fibre glass reinforced materials GFK and CFK (in aircraft construction and shipbuilding), tungsten carbide green components (unsintered carbide), ceramics (i.e. valve covers for car engines), coal products (i.e. brake discs, carbon brushes), cast materials. Benefits of this new bonding: Very good metal removal thanks to higher grain protrusion Allows production of more complex forms, e.g. inner radius Clearly better retention force of grit Cooler grinding thanks to larger chipping spaces iamond grinding point set vacuum brazed bonding, shank Ø, grit 427 Order No. Set price Shape Head dimensions Angle Radius Shank- x total length Round nose Ø /1 x ,50 Ø x 55 Ø 5/2 x ,00 Ø x 55 Ø 6/2 x 7 6 1,00 Ø x 55 Pointed cone Ø 5 x Ø x 55 Ø 5 x Ø x 55 Cylinder Ø 6 x Ø x 55 Rounded cylinder Ø x 7-2,00 Ø x 55 Ø 5 x 10-6,00 Ø x 55 Sphere Ø Ø x 55 Ø Ø x iamond grinding point set vacuum brazed bonding, shank Ø 6, grit 427 Order No. Set price Shape Head dimensions Angle Radius Shank- x total length Round nose Ø 6/1 x ,50 Ø 6 x 60 Flae Ø 8 x Ø 6 x 60 Pointed cone Ø 9 x 4, Ø 6 x 60 Ø 7 x Ø 6 x 60 Cylinder Ø 8 x Ø 6 x 60 Ø 10 x Ø 6 x 60 Rounded cylinder Ø 6 x 1 -,00 Ø 6 x 60 Sphere Ø Ø 6 x 60 Ø Ø 6 x 60 Ø Ø 6 x i All measurements in i Special tools available on request! We can produce custom-made tools with vacuum brazed bonding according to your specifications. iscuss your requirements with Stefan Spiegel: el. +49 (0) / s.spiegel@joke.de el. +49 (0) / Fax +49 (0) / info@joke.de 295
29 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points JOKE diamonds Quality at the full bandwidth 296 el. +49 (0) / Fax +49 (0) / info@joke.de
30 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points Original IPROFIL IPROFIL boron nitride grinding points shank Ø i Vrecom. wet = 0 m/s Vrecom. dry = 20 m/s max. max. extension length = 0.5 x L IPROFIL boron nitride grinding points, galvanic bonding, shank Ø Head dimensions x Neck dimensions d Shank Ø x total length Order No. Cylinder Ø 0.8 x 4 Ø 0.6 x 7 Ø x 46 B d L1 Ø 1 x 4 Ø 0.8 x 8 Ø x 46 B Ø 1.5 x 4 Ø 1. x 10 Ø x 46 B Ø 2 x 5 Ø 1.6 x 14 Ø x 46 B Ø 2.5 x 5 Ø 2.1 x 19 Ø x 46 B Ø x 5 Ø 2.6 x 21 Ø x 46 B Ø.5 x 5 - Ø x 50 B Ø 4 x 5 - Ø x 50 B Ø 4.5 x 5 - Ø x 50 B Ø 5 x 6 - Ø x 50 B Ø 5.5 x 6 - Ø x 50 B Ø 6 x 6 - Ø x 50 B i All measurements in el. +49 (0) / Fax +49 (0) / info@joke.de 297
31 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points Boron nitride grinding points shank Ø i Vrecom. wet = 0 m/s Vrecom. dry = 20 m/s max. max. extension length = 0.5 x L Boron nitride grinding points, galvanic bonding, shank Ø Head dimensions x Neck dimensions d x L1 Shank Ø x total length Order No. Cylinder Ø 0.4 x 2 Ø 0. x 5 Ø x 46 B d L1 Ø 0.5 x 2 Ø 0.4 x 5 Ø x 46 B Ø 0.6 x 2 Ø 0.5 x 5 Ø x 46 B Ø 0.8 x 2 Ø 0.6 x 7 Ø x 46 B Ø 0.8 x 2 Ø 0.4 x 7 Ø x 46 B Ø 1 x 2 Ø 0.8 x 7 Ø x 46 B Ø 1 x 2 Ø 0.6 x 7 Ø x 46 B Ø 1 x 5 Ø 0.6 x 10 Ø x 55 B Ø 1.5 x 5 Ø 1.2 x 12 Ø x 55 B Ø 1.5 x 5 Ø 1.1 x 12 Ø x 55 B Ø 2 x 5 Ø 1.7 x 12 Ø x 55 B Ø 2 x 5 Ø 1.6 x 12 Ø x 55 B Ø 2 x 5 Ø 1.5 x 12 Ø x 55 B Ø 2.5 x 5 Ø 2.2 x 16 Ø x 55 B Ø 2.5 x 5 Ø 2.1 x 16 Ø x 55 B Ø 2.5 x 5 Ø 2.0 x 16 Ø x 55 B Ø x 5 Ø 2.7 x 16 Ø x 55 B Ø x 5 Ø 2.6 x 16 Ø x 55 B Ø x 5 Ø 2.5 x 16 Ø x 55 B Ø.5 x 5 - Ø x 55 B Ø.5 x 5 - Ø x 55 B Ø.5 x 5 - Ø x 55 B Ø 4 x 5 - Ø x 55 B Ø 4 x 5 - Ø x 55 B Ø 4 x 5 - Ø x 55 B Ø 4.5 x 5 - Ø x 55 B Ø 4.5 x 5 - Ø x 55 B Ø 4.5 x 5 - Ø x 55 B i All measurements in 298 el. +49 (0) / Fax +49 (0) / info@joke.de
32 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points Boron nitride grinding points shank Ø i Vrecom. wet = 0 m/s Vrecom. dry = 20 m/s max. max. extension length = 0.5 x L Boron nitride grinding points, galvanic bonding, shank Ø Head dimensions x Neck dimensions d x L1 Shank Ø x total length Order No. Ø 5 x 6 - Ø x 55 B Ø 5 x 6 - Ø x 55 B Ø 5 x 6 - Ø x 55 B Ø 6 x 6 - Ø x 55 B Ø 6 x 6 - Ø x 55 B Ø 6 x 6 - Ø x 55 B i All measurements in NEW! Boron nitride grinding point set shank Ø Ñ boron nitride grinding point set With this set, you will always have the right boron nitride grinding point at hand at an unbeatable price. B 107 for head-ø up to 2.5 B 126 for head-ø more than 2.5 Boron nitride grinding point set (0 pieces), shank Ø Order No. Set price he set contains boron nitride grinding points in cylinder, rounded cylinder, sphere, trapeze, round cone, pointed arch and pointed cone shapes el. +49 (0) / Fax +49 (0) / info@joke.de 299
33 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points Boron nitride grinding points, solid tungsten carbide shank Ø NEW! Ñ Boron nitride grinding points, solid tungsten carbide he new boron nitride grinding points made from solid tungsten carbide convince through their high rigidity and the resulting precise true running. hey are available in ascending increments of 1/10 with a head diameter from 0.4 to.0. i Suitable for every measure hese grinding points are available in increments of 1/10 between 0.4 and.0 diameter. You are sure to find the right one for your application! Boron nitride grinding points, solid tungsten carbide, galvanic bonding, shank Ø Head dimensions x Neck dimensions d Shank Ø x total length Cylinder Ø 0.4 x 2 Ø 0. x Ø x 40 B d L1 Ø 0.5 x 2 Ø 0.4 x Ø x 40 B Ø 0.6 x Ø 0.5 x 5 Ø x 40 B Ø 0.6 x Ø 0.4 x 5 Ø x 40 B Ø 0.7 x Ø 0.6 x 6 Ø x 40 B Ø 0.7 x Ø 0.5 x 6 Ø x 40 B Ø 0.8 x Ø 0.7 x 6 Ø x 40 B Ø 0.8 x Ø 0.6 x 6 Ø x 40 B Ø 0.9 x Ø 0.8 x 7 Ø x 40 B Ø 0.9 x Ø 0.7 x 7 Ø x 40 B Ø 1.0 x Ø 0.8 x 7 Ø x 40 B Ø 1.0 x Ø 0.7 x 7 Ø x 40 B Ø 1.0 x Ø 0.7 x 7 Ø x 40 B Ø 1.1 x Ø 0.9 x 8 Ø x 40 B Ø 1.1 x Ø 0.8 x 8 Ø x 40 B Ø 1.1 x Ø 0.8 x 8 Ø x 40 B Ø 1.2 x Ø 1.0 x 8 Ø x 40 B Ø 1.2 x Ø 0.9 x 8 Ø x 40 B Ø 1.2 x Ø 0.9 x 8 Ø x 40 B Ø 1. x Ø 1.1 x 8 Ø x 40 B Ø 1. x Ø 1.0 x 8 Ø x 40 B Ø 1. x Ø 1.0 x 8 Ø x 40 B Ø 1.4 x Ø 1.2 x 8 Ø x 40 B Ø 1.4 x Ø 1.1 x 8 Ø x 40 B Ø 1.4 x Ø 1.1 x 8 Ø x 40 B Ø 1.5 x Ø 1. x 15 Ø x 40 B Ø 1.5 x Ø 1.2 x 15 Ø x 40 B Ø 1.5 x Ø 1.2 x 15 Ø x 40 B Ø 1.6 x 4 Ø 1.4 x 15 Ø x 40 B Ø 1.6 x 4 Ø 1. x 15 Ø x 40 B Ø 1.6 x 4 Ø 1. x 15 Ø x 40 B Ø 1.7 x 4 Ø 1.5 x 15 Ø x 40 B Ø 1.7 x 4 Ø 1.4 x 15 Ø x 40 B Ø 1.7 x 4 Ø 1.4 x 15 Ø x 40 B i All measurements in Order No. 00 el. +49 (0) / Fax +49 (0) / info@joke.de
34 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points NEW! Boron nitride grinding points, solid tungsten carbide shank Ø Boron nitride grinding points, solid tungsten carbide, galvanic bonding, shank Ø Head dimensions x Neck dimensions d Shank Ø x total length Order No. Ø 1.8 x 4 Ø 1.6 x 15 Ø x 40 B Ø 1.8 x 4 Ø 1.5 x 15 Ø x 40 B Ø 1.8 x 4 Ø 1.5 x 15 Ø x 40 B d L1 Ø 1.9 x 4 Ø 1.7 x 15 Ø x 40 B Ø 1.9 x 4 Ø 1.6 x 15 Ø x 40 B Ø 1.9 x 4 Ø 1.6 x 15 Ø x 40 B Ø 2.0 x 5 Ø 1.8 x 15 Ø x 40 B Ø 2.0 x 5 Ø 1.7 x 15 Ø x 40 B Ø 2.0 x 5 Ø 1.7 x 15 Ø x 40 B Ø 2.1 x 5 Ø 1.9 x 15 Ø x 40 B Ø 2.1 x 5 Ø 1.8 x 15 Ø x 40 B Ø 2.1 x 5 Ø 1.8 x 15 Ø x 40 B Ø 2.2 x 5 Ø 2.0 x 15 Ø x 40 B Ø 2.2 x 5 Ø 1.9 x 15 Ø x 40 B Ø 2.2 x 5 Ø 1.9 x 15 Ø x 40 B Ø 2. x 5 Ø 2.1 x 15 Ø x 40 B Ø 2. x 5 Ø 2.0 x 15 Ø x 40 B Ø 2. x 5 Ø 2.0 x 15 Ø x 40 B Ø 2.4 x 5 Ø 2.2 x 15 Ø x 40 B Ø 2.4 x 5 Ø 2.1 x 15 Ø x 40 B Ø 2.4 x 5 Ø 2.1 x 15 Ø x 40 B Ø 2.5 x 5 Ø 2. x 16 Ø x 40 B Ø 2.5 x 5 Ø 2.2 x 16 Ø x 40 B Ø 2.5 x 5 Ø 2.2 x 16 Ø x 40 B Ø 2.6 x 5 Ø 2.4 x 16 Ø x 40 B Ø 2.6 x 5 Ø 2. x 16 Ø x 40 B Ø 2.6 x 5 Ø 2. x 16 Ø x 40 B Ø 2.7 x 5 Ø 2.5 x 16 Ø x 40 B Ø 2.7 x 5 Ø 2.4 x 16 Ø x 40 B Ø 2.7 x 5 Ø 2.4 x 16 Ø x 40 B Ø 2.8 x 5 Ø 2.6 x 16 Ø x 40 B Ø 2.8 x 5 Ø 2.5 x 16 Ø x 40 B Ø 2.8 x 5 Ø 2.5 x 15 Ø x 40 B Ø 2.9 x 5 Ø 2.7 x 16 Ø x 40 B Ø 2.9 x 5 Ø 2.6 x 16 Ø x 40 B Ø 2.9 x 5 Ø 2.6 x 16 Ø x 40 B Ø.0 x 5 Ø 2.8 x 17 Ø x 40 B Ø.0 x 5 Ø 2.7 x 17 Ø x 40 B Ø.0 x 5 Ø 2.7 x 17 Ø x 40 B i All measurements in el. +49 (0) / Fax +49 (0) / info@joke.de 01
35 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points Boron nitride grinding points shank Ø 6 i Vempf. nass = 0 m/s Vrecom. dry = 20 m/s max. max. extension length = 0.5 x L Boron nitride grinding points, solid tungsten carbide, galvanic bonding, shank Ø 6 Head dimensions x Neck dimensions d x L1 Shank Ø x total length Order No. Cylinder NEW! Ø 2 x 4 Ø 1.7 x 20 Ø 6 x 60 B d L1 Ø 2 x 4 Ø 1.7 x 20 Ø 6 x 60 B Ø 2 x 4 Ø 1.7 x 20 Ø 6 x 60 B Ø x 5 Ø 2.7 x 20 Ø 6 x 60 B Ø x 5 Ø 2.7 x 20 Ø 6 x 60 B Ø x 5 Ø 2.7 x 20 Ø 6 x 60 B Ø 4 x 7 Ø.7 x 20 Ø 6 x 60 B Ø 4 x 7 Ø.7 x 20 Ø 6 x 60 B Ø 4 x 7 Ø.7 x 20 Ø 6 x 60 B Ø 5 x 7 Ø 4.7 x 20 Ø 6 x 60 B Ø 5 x 7 Ø 4.7 x 20 Ø 6 x 60 B Ø 5 x 7 Ø 4.7 x 20 Ø 6 x 60 B Ø 6 x 7 Ø 5.7 x 20 Ø 6 x 60 B Ø 6 x 7 Ø 5.7 x 20 Ø 6 x 60 B NEW! Ø 6 x 7 Ø 5.7 x 20 Ø 6 x 60 B Ø 6 x 20 - Ø 6 x 60 B Ø 6 x 20 - Ø 6 x 60 B Ø 8 x 6 - Ø 6 x 60 B Ø 8 x 6 - Ø 6 x 60 B Ø 10 x 6 - Ø 6 x 60 B Ø 10 x 6 - Ø 6 x 60 B Ø 10 x 6 - Ø 6 x 60 B Ø 10 x 10 - Ø 6 x 60 B Ø 10 x 10 - Ø 6 x 60 B Ø 10 x 15 - Ø 6 x 60 B Ø 10 x 15 - Ø 6 x 60 B Ø 12 x 6 - Ø 6 x 60 B Ø 12 x 6 - Ø 6 x 60 B Ø 12 x 6 - Ø 6 x 60 B i All measurements in 02 el. +49 (0) / Fax +49 (0) / info@joke.de
36 . iamond and boron nitride tools Ñ.1. iamond and boron nitride grinding points Boron nitride grinding points shank Ø 6 i Vrecom. wet = 0 m/s Vrecom. dry = 20 m/s max. max. extension length = 0.5 x L Boron nitride grinding points, solid tungsten carbide, galvanic bonding, shank Ø 6 Head dimensions x Neck dimensions d x L1 Shank Ø x total length Order No. Ø 12 x 10 - Ø 6 x 60 B Ø 12 x 10 - Ø 6 x 60 B Ø 15 x 6 - Ø 6 x 60 B Ø 15 x 6 - Ø 6 x 60 B Ø 15 x 6 - Ø 6 x 60 B Ø 15 x 10 - Ø 6 x 60 B Ø 15 x 10 - Ø 6 x 60 B i All measurements in NEW! iamond hollow drill iamond hollow drill, electroplated Head dimensions Shank imensions rilling depth Flush drilling Order No. from 10 pieces Electroplated hollow drills for drilling in thin ceramic, glass, carbide green body and other slabs. Ø 2 x 7 Ø x 8 7 Ø 1 x Ø x 10 Ø x 5 7 Ø 1,5 x Ø 4 x 10 Ø x 5 7 Ø 2 x Ø 5 x 10 Ø x 8 7 Ø 2 x Ø 6 x 10 Ø x 5 7 Ø 2 x Ø 8 x 10 Ø x 5 7 Ø x i All measurements in Examples of use: Blank drilling el. +49 (0) / Fax +49 (0) / info@joke.de 0
37 . iamond and boron nitride tools Ñ.2. iamond and boron nitride deburring tools iamond/boron nitride reamers with adjustable recess NEW! Ñ iamond/boron nitride reamers hese tools convince with their robust and user-friendly construction and extraordinary durability. As the advancement of conventional lapping arbors, these reamers can be used without paste so that no time-consuming cleaning is necessary. esign features fixed shank, cylindrical clamping; slotted front and continuously adjustable with locking screw. Main applications: Finishing-machining of hardened pressdrilling for tool and mould making Reworking on hard ejector drilling and sleeves for the plastics industry Fine machining and finishing for largescale production on transfer lines and machining centres i iamond or boron nitride? hat depends on the hardness of the material: iamond for tungsten carbide,, ceramics and steel up to 57 HRC Boron nitride for hardened steel up to 58 HRC iamond/boron nitride reamers esign Nominal x coating length Ø Shank dimensions otal length iamond Ø 2 x 10 Ø 6 x Ø x 20 Ø 6 x Ø 4 x 20 Ø 6 x Ø 5 x 0 Ø 5 x Ø 6 x 0 Ø 6 x Ø 8 x 40 Ø 8 x Ø 10 x 40 Ø 10 x Ø 12 x 40 Ø 12 x Order No. Boron nitride Ø 2 x 10 Ø 6 x B Ø x 20 Ø 6 x B Ø 4 x 20 Ø 6 x B Ø 5 x 0 Ø 5 x B Ø 6 x 0 Ø 6 x B Ø 8 x 40 Ø 8 x B Ø 10 x 40 Ø 10 x B Ø 12 x 40 Ø 12 x B Ød i All measurements in 04 el. +49 (0) / Fax +49 (0) / info@joke.de
38 . iamond and boron nitride tools Ñ.2. iamond and boron nitride deburring tools NEW! iamond/boron nitride bullets, slotted with adjustable elastic recess Ñ iamond/boron nitride bullets, slotted Simple tools which come into their own when deburring hard materials. hey can be used in vertical drills, for manual operation or in machining centres (serial production). Available with or without elastic recess. ypical deburring applications: Interconnected bore holes with various diameters in the hydraulics industry and in general mechanical engineering Guide bore holes in valve block manufacturing Components for the automotive industry (i.e. leak oil or throttle bore holes) Small bore holes for vendor parts (i.e. oil, lube or relief bore holes) urning parts with cross-holes iamond/boron nitride bullets, slotted, adjustable recess 25 Ø esign Nominal Shank dimensions otal length iamond Ø 2.5 Ø 6 x Ø.0 Ø 6 x Ø.5 Ø 6 x Ø 4.0 Ø 6 x Ø 4.5 Ø 6 x Ø 5.0 Ø 6 x Ø 5.5 Ø 6 x Ø 6.0 Ø 6 x Ø 6.5 Ø 8 x Ø 7.0 Ø 8 x Ø 7.5 Ø 8 x Ø 8.0 Ø 8 x Ø 8.5 Ø 10 x Ø 9.0 Ø 10 x Ø 9.5 Ø 10 x Ø 10.0 Ø 10 x Order No. Ød Boron nitride Ø 2.5 Ø 6 x B Ø.0 Ø 6 x B Ø.5 Ø 6 x B Ø 4.0 Ø 6 x B Ø 4.5 Ø 6 x B Ø 5.0 Ø 6 x B Ø 5.5 Ø 6 x B Ø 6.0 Ø 6 x B Ø 6.5 Ø 8 x B Ø 7.0 Ø 8 x B Ø 7.5 Ø 8 x B Ø 8.0 Ø 8 x B Ø 8.5 Ø 10 x B Ø 9.0 Ø 10 x B Ø 9.5 Ø 10 x B Ø 10.0 Ø 10 x B i All measurements in el. +49 (0) / Fax +49 (0) / info@joke.de 05
39 . iamond and boron nitride tools Ñ.2. iamond and boron nitride deburring tools iamond/boron nitride bullets, slotted without adjustable recess NEW! iamond/boron nitride bullets, slotted, without adjustable recess 25 Ø esign Nominal Shank measurements otal length iamond Ø 1.5 Ø 4 x Ø 2.0 Ø 4 x Ø 2.5 Ø 4 x Ø.0 Ø 4 x Ø.5 Ø 4 x Ø 4.0 Ø 4 x Ø 4.5 Ø 6 x Ø 5.0 Ø 6 x Ø 5.5 Ø 6 x Ø 6.0 Ø 6 x Ø 6.5 Ø 8 x Ø 7.0 Ø 8 x Ø 7.5 Ø 8 x Ø 8.0 Ø 8 x Ø 8.5 Ø 10 x Ø 9.0 Ø 10 x Ø 9.5 Ø 10 x Ø 10.0 Ø 10 x Order No. Ød Boron nitride Ø 1.5 Ø 4 x B Ø 2.0 Ø 4 x B Ø 2.5 Ø 4 x B Ø.0 Ø 4 x B Ø.5 Ø 4 x B Ø 4.0 Ø 4 x B Ø 4.5 Ø 6 x B Ø 5.0 Ø 6 x B Ø 5.5 Ø 6 x B Ø 6.0 Ø 6 x B Ø 6.5 Ø 8 x B Ø 7.0 Ø 8 x B Ø 7.5 Ø 8 x B Ø 8.0 Ø 8 x B Ø 8.5 Ø 10 x B Ø 9.0 Ø 10 x B Ø 9.5 Ø 10 x B Ø 10.0 Ø 10 x B i All measurements in 06 el. +49 (0) / Fax +49 (0) / info@joke.de
40 . iamond and boron nitride tools Ñ.2. iamond and boron nitride deburring tools NEW! iamond spring steel wires Ñ iamond spring steel wires Flexible application for example for dividing outline parts, machine finishing of bores or slots in hard materials. i Wire as desired All wires are 0.6 and are available in grit s 0, 54, 64, 91, 107 and 126 at short notice. If desired, wires can also be delivered in 200, 250 and 20 length. Custom-made coating length, wire with or without tip. iscuss your requirements with Stefan Spiegel: el. +49 (0) / s.spiegel@joke.de iamond spring steel wires, galvanic bonding i Coating centred as standard! imensions Coating dimensions otal length Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Order No. el. +49 (0) / Fax +49 (0) / info@joke.de 07
41 . iamond and boron nitride tools Ñ.. iamond abrasive discs and sheets iamond cup wheels resin bondinging iamond cup wheel discs, resin bonding imensions x Coating dimensions W x X Bore Ø Concentration Order No. 12 A2-20 Ø 100 x 12 5 x 2 20 C Ø 100 x 12 5 x 2 20 C Ø 100 x 12 5 x 2 20 C Ø 100 x 12 5 x 2 20 C W X Ø 125 x x 2 20 C E 20 Ø 125 x x 2 20 C H Ø 125 x x 2 20 C Ø 125 x x 2 20 C A2-45 Ø 100 x 26 5 x 2 20 C Ø 100 x 26 5 x 2 20 C Ø 100 x 26 5 x 2 20 C Ø 100 x 26 5 x 2 20 C X Ø 100 x x 2 20 C W Ø 100 x x 2 20 C E 45 Ø 100 x x 2 20 C H Ø 100 x x 2 20 C Ø 125 x x 2 20 C Ø 125 x x 2 20 C Ø 125 x x 2 20 C Ø 125 x x 2 20 C V9 Ø 100 x 5 10 x 20 C Ø 100 x 5 10 x 20 C Ø 100 x 5 10 x 20 C Ø 100 x 5 10 x 20 C X Ø 125 x x 20 C U Ø 125 x x 20 C Ø 125 x x 20 C E 70 Ø 125 x x 20 C H 12 V9-45 Ø 100 x x 20 C Ø 100 x x 20 C Ø 100 x x 20 C Ø 100 x x 20 C X Ø 125 x x 20 C Ø 125 x x 20 C E 45 U Ø 125 x x 20 C Ø 125 x x 20 C H i All measurements in 08 el. +49 (0) / Fax +49 (0) / info@joke.de
42 . iamond and boron nitride tools Ñ.. iamond abrasive discs and sheets Cleaning stone Cleaning stone Order No. In order to keep the cutting surface of the resin-bound abrasive discs clean and sharp, they should be regularly dressed with a cleaning stone iamond abrasive discs, galvanic bonding iamond grinding and cup wheels galvanic/metal bonding imensions x Coating dimensions W / W1 Bore Ø Order No. 12 A2-45 Ø 100 x 26 5 x Ø 100 x 26 5 x Ø 100 x 26 5 x Ø 100 x x Ø 100 x x Ø 100 x x Ø 125 x x Ø 125 x x i Boron nitride abrasive discs available on demand! We can also offer you abrasive discs with boron nitride coating. Please discuss your requirements with Stefan Spiegel: el. +49 (0) / s.spiegel@joke.de Ø 150 x x i All measurements in iamond abrasive discs, metal bonding imensions x Coating dimensions W x X Bore Ø 12 A2-45 Ø 100 x 26 5 x Ø 100 x 26 5 x Order No. from pieces Ø 100 x x Ø 100 x x i All measurements in el. +49 (0) / Fax +49 (0) / info@joke.de 09
43 . iamond and boron nitride tools Ñ.. iamond abrasive discs and sheets iamond abrasive discs galvanic bonding iamond abrasive discs, galvanic bonding imensions x Coating dimensions W / W1 Bore Ø Order No. 1 A1 Ø 10 x Ø 15 x Ø 20 x i All measurements in Ø 20 x Ø 20 x Ø 0 x Ø 40 x Ø 40 x Ø 50 x Ø 50 x Ø 75 x Ø 75 x Cut-off disc receptacles with tungsten carbide shank Ø 100 x Ø 100 x Ø 100 x Cut-off disc receptacles with tungsten carbide shank ype Receptacle bore Ø Flange Ø Shank dimensions B x L A Ø 9 Ø 6 x A Ø 9 Ø x Order No. 5,5 6 B7 A5 5 Ø 9 Ø 6 x C7 A7 A5 5 Ø 9 Ø x SW 7 L L1 A6 6 Ø 12 Ø x A6 6 Ø 12 Ø 6 x A8 8 Ø 12 Ø x A8 8 Ø 12 Ø 6 x A8-G 8 Ø 24 Ø 6 x B7 C7 C7 A7 A10 10 Ø 24 Ø 6 x L1 L A1 1 Ø 24 Ø 6 x i All measurements in 10 el. +49 (0) / Fax +49 (0) / info@joke.de
44 . iamond and boron nitride tools Ñ.. iamond abrasive discs and sheets iamond cut-off discs with closed rim iamond cut-off discs, galvanic bonding imensions x Bore Ø Blade thickness matching receptacle Ø 20.0 x A Ø 20.0 x A Ø 20.0 x A Ø 20.0 x A Order No. H E Ø 25.0 x A Ø 25.0 x A Ø 25.0 x A Ø 25.0 x A Ø 0.0 x A Ø 0.0 x A Ø 0.0 x A Ø 0.0 x A Ø 0.0 x A Ø 0.0 x A Ø 40.0 x A Ø 40.0 x A Ø 40.0 x A Ø 40.0 x A Ø 50.0 x A Ø 50.0 x A Ø 50.0 x A Ø 50.0 x A Ø 65.0 x A8-G Ø 65.0 x A8-G Ø 75.0 x Ø 75.0 x Ø x Ø x Ø x Ø x Ø x Ø x Ø x i All measurements in el. +49 (0) / Fax +49 (0) / info@joke.de 11
45 . iamond and boron nitride tools Ñ.. iamond abrasive discs and sheets iamond abrasive discs JOKE ia-speed JOKE ia-speed abrasive discs imensions Bonding Colour Order No. Highly flexible, diamond-coated abrasive discs. Only to be used wet in order to avoid overheating and and separation of the diamond coating. Furthermore, coolants improve chip clearance and and result in better surface finishing with less wear. hanks to the high abrasive force of the diamonds, ia-speed abrasive discs do not require any high contact pressure. Areas of use: ungsten carbide, ceramic, glass, hardened steels, stone. Ø 25 Metal 250 green Metal 126 black Metal 76 red Metal 46 yellow Metal 20 white Resin 15 yellow Resin 7 blue Resin orange Ø 50 Metal 250 green Metal 126 black Metal 76 red Metal 46 yellow Metal 20 white Resin 15 yellow Resin 7 blue Resin orange matching mandrels shanks Shank dimensions Order No. Mandrel for shank Ø 25 Ø Mandrel for shank Ø 50 Ø el. +49 (0) / Fax +49 (0) / info@joke.de
46 . iamond and boron nitride tools Ñ.. iamond abrasive discs and sheets iamond abrasive strips JOKE ia-speed JOKE ia-speed abrasive strips imensions Bonding Colour Order No. Featuring the same characteristics and benefits as the abrasive sheets ia-speed, but in sleeve form. Use in combination with the relevant rubber holder. hanks to centrifugal force pressure, the sleeves remain securely on the holder even at high rotational speeds. Ø 15 x 0 Metal 250 green Metal 126 black Metal 76 red Metal 46 yellow Metal 20 white Resin 15 yellow Resin 7 blue Resin orange Ø 22 x20 Metal 250 green Metal 126 black Metal 76 red Metal 46 yellow Metal 20 white Resin 15 yellow Resin 7 blue Resin orange matching abrasive strip holder Shank dimensions Order No. Abrasive strip holder, Ø 15 x 0 Ø 6 x Abrasive strip holder, Ø 22 x 20 Ø 6 x from 10 pieces Plastic/diamond cut-off discs JOKE ia isc Plastic/diamond cut-off discs JOKE ia-isc hin, highly flexible plastic discs filled with natural diamonds. he discs can be used on both sides for polishing zirconium, glass, titanium, stone and all steels. Ideal for narrow slots. Can be used with fluid or diamond paste. Max. speed: 5,000 rpm imensions Bore Ø Colour Order No. Ø 22 x µ green Ø 22 x µ blue grinding wheel holders Shank dimensions Bore Ø Max. disc Order No. from 10 pieces Ø 2.5 Ø Ø 7.5 x Ø.0 Ø Ø 7.5 x Ø.0 Ø Ø 8 x el. +49 (0) / Fax +49 (0) / info@joke.de 1
47 . iamond and boron nitride tools Ñ.4. iamond single-stone dressers iamond single-stone dressers iamond Ñ iamond single-stone dressers he single diamonds have at least three working points (quality 0). hey have a blockshaped, firmly textured crystal shape with inclusions. Please note: ressing sideways feed /revolution Adequate continuous cooling Always protect the diamond against blows and impacts Max. feed motion 0.0 Place something under the centre of the disc at an angel of inclination of 5-15 single-stone dressers otal length; iamond weight; carat MK ct i Choice of single-stone dresser in relation to the grinding wheel Scheibenbreite Wheel width in , ct 0,5 ct 0,75 ct 1,0 ct Scheibendurchmesser Wheel diameter in in ct ct ct Order No. MK ct ct ct ct Ø ct ct Ø 6 / Ø ct ct ct Ø ct ct ct ct ct Ø ct ct ct el. +49 (0) / Fax +49 (0) / info@joke.de
48 . iamond and boron nitride tools Ñ.4. iamond single-stone dressers iamond multiple-stone dressers Ñ iamond multiple-stone dressers Multi stone dressers are normally used for large, very wide grinding wheels. Since a large diamond surface is used in the multiple-stone dresser, the load is optimally distributed. i Choice of a multiple-stone dresser in relation to the grinding wheel. 500 Scheibenbreite Wheel width in in stones Steine 1,0 ct 6 stones Steine 1,0 ct Scheibendurchmesser Wheel diameter in in iamond multiple-stone dressers otal length; iamond distribution iamond weight; carat MK Layer - Stones 1.0 ct Order No Layer - 6 Stones 1.0 ct MK Layer - Stones 1.0 ct Layer - 6 Stones 1.0 ct Ø 8 x Layer - Stones 1.0 ct Layer - 6 Stones 1.0 ct el. +49 (0) / Fax +49 (0) / info@joke.de 15
49 . iamond and boron nitride tools Ñ.4. iamond single-stone dressers iamond multi-grit dressers Ñ iamond multi-grit dressers Multi grain dressers can be used until they are worn out. he diamond disc is completely interspersed with diamond grit. ue to the low planing forces, these dressers are predominantly used for narrow, sharp-edged and pointed wheels. i Choice of multi grain dressers in relation to the grinding wheel. Scheibenbreite Wheel width in in ct 1,5 ct 2,75 ct 1,75 ct Scheibendurchmesser Wheel diameter in in iamond multi-grit dressers otal length; of grinding wheel to be dressed iamond weight; carat MK ct ct ct Order No. from 5 pieces from 1 piece MK ct ct ct Ø 8 x ct ct ct Ø 12 x ct ct ct iamond multi-grit hand dressers Order No. otal length 120, for dressing grinding points up to Ø 25, usable diamond Ø 5 x el. +49 (0) / Fax +49 (0) / info@joke.de
50 . iamond and boron nitride tools Ñ.5. iamond sheets and strips iamond abrasive sheets, belts and files JOKE ia-speed diamond abrasive sheets imensions Bonding Colour Order No. hickness Highly flexible, diamond-coated abrasive sheets. Only to be used wet in order to avoid overheating and separation of the diamond layer. Furthermore, coolants improve the improve chip clearance and consequently result in better surface finishing with less wear. hanks to the high abrasive power of the diamonds, ia-speed abrasive sheets can also be used with low contact pressure. Applications: tungsten carbide, ceramic, glass, hardened steels, stone. 75 x 75 Metal 250 green Metal 126 black Metal 76 red Metal 46 yellow Metal 20 white Resin 15 yellow Resin 7 blue Resin orange Flexible diamond files Flexible diamond files with galvanic coating, applied in spots. PCB material base. For processing hard materials with short chips. imensions Coating length otal length 14 x 1, x 1, x 1, Order No. Set: Order No. Set price Flexible diamond file set ( pieces) he set contains one file of each grit el. +49 (0) / Fax +49 (0) / info@joke.de 17
51 . iamond and boron nitride tools Ñ.5. iamond sheets and strips iamond-coated PE strips iamond-coated PE strips imensions Order No. Strip thickness 75 μm. Highly flexible abrasive film for use in tool and mould building. Particularly suited to high gloss polishing. he sheets are waterproof and impress through high tensile strength and heat resistance. Can be cut to any desired dimension. Applications: tungsten carbide, ceramic, glass, hardened steels, jewellery, stone. 25 x µ µ µ µ µ µ µ Set: Order No. Set price iamond-coated PE strip set he set contains one sheet of each grit s iamond-coated metal foil imensions Bonding Order No. Strip thickness iamond-coated metal foil. Galvanic bonding. Very high stock removal. Flexible and can be cut to with scissors. Applications: tungsten carbide, ceramic, glass, hardened steels, fibreglass, jewellery, stone. 10 x 100 galvanic # 120/ galvanic # 150/ galvanic # 200/ galvanic # 00/ galvanic # 400/ galvanic # 600/ galvanic # 800/ galvanic # 1200/ galvanic # 1800/ x 100 galvanic # 120/ galvanic # 150/ galvanic # 200/ galvanic # 00/ galvanic # 400/ galvanic # 600/ galvanic # 800/ galvanic # 1200/ galvanic # 1800/ el. +49 (0) / Fax +49 (0) / info@joke.de
52 . iamond and boron nitride tools Ñ.5. iamond sheets and strips iamond-coated nylon webbing Kwik-Lap iamond-coated Kwip-Lap nylon webbing imensions Packing unit Order No. Packet price Kwik-Lap is a nylon webbing coated with diamond grit for lapping and polishing tungsten carbide, glass, steel and plastics. Kwik-Lap is coated on both sides and thanks to its web-like structure offers a high stock removal with a simultaneously high long service life. Kwik-Lap should be used with fluid and subsequently cleaned. o not use any solvents that dissolve rubber, since otherwise the diamonds will lose their adhesion. 50 x items x items x items Set: Order No. iamond-coated grid set Kwik-Lap he set contains one sheet 50 x 25 respectively in grit s 400, 600 and iamond strips imensions Order No. Flexible strips with galvanic coating and synthetic backing for customised coating. High stock removal with a fine grinding pattern. 80 x x el. +49 (0) / Fax +49 (0) / info@joke.de 19
53 . iamond and boron nitride tools Ñ.6. iamond files iamond files Overview he right file for every application Ñ iamond files are universal tools for the mould and tool maker. hey offer quick and precise stock removal, a long lifespan and are therefore economical in application. hey are perfect for use on hardened and tough untempered steels, for example when removing hardness distortion or burr formation on cutting, moulding and punching tools. iamond-coated files are also used for machining tungsten carbide, ceramic, GRP, carbon-fibre reinforced plastic, carbide green bodies, ferrites and many more. hanks to the diamond grains protruding from the bonding, excellent results can be achieved even with low contact pressure. Available in 0 (very fine) to 252 (very coarse) grit s. You have the choice between diamond files for use in hand-filing machines or for manual application. Conical files for mechanical or manual application round off our range of diamond files. Ñ You will find: iamond machine files from page 21 iamond hand files from page 4 Conical diamond files from page 48 Overview diamond files iamond machine files iamond hand files otal length Coating length Shank Page otal length Coating length Shank Page Ø /20 Ø Ø Ø Ø / x Ø Ø Ø Ø /200 80/120 Ø x 5 / 10 x Ø x Ø /78 15/25 15 x 1 46 iamond machine files, ripple form iamond toolshop files otal length Coating length Shank Page otal length Coating length Shank Page Ø with handle with handle 47 Conical diamond machine files otal length Coating length Shank Page iamond hand files. ripple form 56/72 15 Ø 49 otal length Coating length Page x on both x Ø 48 Conical diamond hand files otal length Coating length Shank Page 10 0 Ø /8 x 2/ el. +49 (0) / Fax +49 (0) / info@joke.de
54 . iamond and boron nitride tools Ñ.6. iamond files Original IPROFIL iamond machine files Mini, coated on one side for use in IPROFIL mini hand-filing machines FMR iamond machine files for use in IPROFIL mini hand-filing machines Shape ype Shank dimensions Coating dimensions Order No. Price 4 0,6 Flat L Ø 2. x 2 4 x µ L Ø 2. x 2 4 x µ L Ø 2. x 2 4 x µ L-10-0 Ø 2. x 2 4 x 10 0 µ L Ø 2. x 2 4 x µ ,6 L Ø 2. x 2 4 x µ ,6 Spatula L Ø 2. x 2 2/4 x µ L Ø 2. x 2 2/4 x µ L Ø 2. x 2 2/4 x µ L-20-0 Ø 2. x 2 2/4 x 10 0 µ ,4 Bent LA-C 50/ Ø 2. x µ ,4 Spatula, bent LA-E 50/ Ø 2. x 2 2/4 x 9 50 µ ,5 2 0,55 Knife LA-S 150/ Ø 2. x 2 2/.5 x µ LA-S 100/ Ø 2. x 2 2/.5 x µ LA-S 75/ Ø 2. x 2 2/.5 x 8 75 µ LA-S 50/ Ø 2. x 2 2/.5 x 8 50 µ LA-S 0/ Ø 2. x 2 2/.5 x 8 0 µ LA-S 15/ Ø 2. x 2 2/.5 x 8 15 µ ,5 2 0,4 Spatula, extra thin LA-75/ Ø 2. x 2 2/.5 x µ LA-15/ Ø 2. x 2 2/.5 x µ Set: Order No. Set miniature diamond files IPROFIL consisting of file stand and 10 mini diamond files in different shapes and grit s el. +49 (0) / Fax +49 (0) / info@joke.de 21
55 . iamond and boron nitride tools Ñ.6. iamond files IPROFIL LA diamond machine files shank Ø, total length 50 Original IPROFIL Ñ iamond machine files We offer a range of diamond-coated machine files in different variations. All files are electroplated. he different shapes, shank Ø (.5 and 5.5 ), total lengths (50 to 180 ) and coating lengths cover almost all conceivable application areas. hese files are perfect for use in hand-filing machines. IPROFIL LA diamond machine files, shank Ø, galvanic bonding imensions Coating length; otal length; ype Order No. Flat 2 x LA 2 x 1 S x LA 2 x 1 S from 10 pieces from 1 piece 2 x LA 2 x 1 S x LA 2 x 1 S x LA 2 x 1 S x LA x 1 S x LA x 1 S x LA x 1 S x LA x 1 S x LA x 1 S x LA 4 x 1 S x LA 4 x 1 S x LA 4 x 1 S x LA 4 x 1 S x LA 4 x 1 S x LA 4 x 2 S x LA 4 x 2 S x LA 4 x 2 S x LA 4 x 2 S x LA 4 x 2 S x LA 5 x 2 S x LA 5 x 2 S x LA 5 x 2 S x LA 5 x 2 S x LA 5 x 2 S Flat, safe sided file 2 x LA 2 x x LA 2 x x LA 2 x el. +49 (0) / Fax +49 (0) / info@joke.de
56 . iamond and boron nitride tools Ñ.6. iamond files Original IPROFIL IPROFIL LA diamond machine files shank Ø, total length 50 IPROFIL LA diamond machine files, shank Ø, galvanic bonding imensions Coating length; otal length; ype Order No. x LA x from 10 pieces from 1 piece x LA x x LA x x LA 4 x x LA 4 x x LA 4 x x LA 4 x x LA 4 x x LA 4 x x LA 5 x x LA 5 x x LA 5 x Flat, safe sided file, edge-cutting 0.5 x LA 0.5 x x LA 0.5 x x LA 0.75 x x LA 0.75 x x LA 1 x x LA 1 x Round Ø LA Ø LA Ø LA Ø LA Ø LA Ø LA Ø LA Ø LA Ø LA Ø LA Ø LA for further shapes, see following page! Ø LA Ø LA el. +49 (0) / Fax +49 (0) / info@joke.de 2
57 . iamond and boron nitride tools Ñ.6. iamond files IPROFIL LA diamond machine files shank Ø, total length 50 Original IPROFIL IPROFIL LA diamond machine files, shank Ø, galvanic bonding imensions Coating length; otal length; ype Order No. Ø LA from 10 pieces from 1 piece Ø LA Ø LA Ø LA Ø LA Ø LA Ø LA hree-square 2 x 2 x LA 2 S x 2 x LA 2 S x 2 x LA 2 S x 2 x LA 2 S x 2 x LA 2 S x x LA S x x LA S x x LA S x x LA S x x LA S x 4 x LA 4 S x 4 x LA 4 S x 4 x LA 4 S x 4 x LA 4 S hree-square, safe sided file 2 x 2 x LA x 2 x LA x 2 x LA x x LA x x LA x x LA x 4 x LA x 4 x LA Halfround R = LA R 1 S R = LA R 1 S R = LA R 1 S el. +49 (0) / Fax +49 (0) / info@joke.de
58 . iamond and boron nitride tools Ñ.6. iamond files Original IPROFIL IPROFIL LA diamond machine files shank Ø, total length 50 IPROFIL LA diamond machine files, shank Ø, galvanic bonding imensions Coating length; otal length; ype Order No. R = LA R 1.5 S from 10 pieces from 1 piece R = LA R 1.5 S R = LA R 1.5 S R = LA R 2 S R = LA R 2 S R = LA R 2 S Halfround, safe sided file R = LA R R = LA R R = LA R R = LA R R = LA R R = LA R R = LA R R = LA R Crossing R = 2.5 x LA R2.5 x R R = 2.5 x LA R2.5 x R R = 2.5 x LA R2.5 x R R = 2.5 x LA R2.5 x R R = 2.5 x LA R2.5 x R el. +49 (0) / Fax +49 (0) / info@joke.de 25
59 . iamond and boron nitride tools Ñ.6. iamond files LE diamond machine files shank Ø, total length 85 LE diamond machine files, shank Ø, galvanic bonding imensions Coating length; otal length; ype Order No. Flat, safe sided file 5 x LE x LE x LE x LE x LE Round Ø LE Ø LE Ø LE Ø LE Ø LE hree-square, safe sided file.5 x LE x LE x LE x LE x LE Square 2.5 x LE x LE x LE x LE x LE Halfround, safe sided file 5 x LE x LE x LE x LE x LE Crossing 5 x LE x LE x LE x LE x LE el. +49 (0) / Fax +49 (0) / info@joke.de
60 . iamond and boron nitride tools Ñ.6. iamond files Original IPROFIL IPROFIL LE diamond machine files shank Ø, total length 85 IPROFIL LE diamond machine files, shank Ø, galvanic bonding imensions Coating length; otal length; ype Order No. from 5 pieces Flat 5 x LE x LE Flat, safe sided file 5 x LE x LE Round Ø LE Ø LE hree-square.5 x.5 x LE x.5 x LE Square 2.5 x LE x LE Halfround 5 x LE x LE Halfround, safe sided file 5 x LE x LE Crossing 5 x LE el. +49 (0) / Fax +49 (0) / info@joke.de 27
61 . iamond and boron nitride tools Ñ.6. iamond files IPROFIL LB diamond riffle files shank Ø, total length 65 Original IPROFIL IPROFIL LB diamond riffle files, shank Ø, galvanic bonding imensions Coating length; otal length; ype Order No. Flat.2 x LB Flat, cropped.2 x LB Round Ø LB Round, bent Ø LB hree-square LB Crossing 4.0 x LB Set: Order No. iamond machine file set IPROFIL LB Contents: 6 files 28 el. +49 (0) / Fax +49 (0) / info@joke.de
62 . iamond and boron nitride tools Ñ.6. iamond files Original IPROFIL IPROFIL LF diamond riffle files shank Ø, total length 85 IPROFIL LF diamond riffle files, shank Ø, galvanic bonding imensions Coating length; otal length; ype Order No. from 10 pieces Flat 4.5 x LF x LF x LF Round Ø LF Ø LF Ø LF Square x LF x LF x LF Crossing 5 x LF x LF x LF el. +49 (0) / Fax +49 (0) / info@joke.de 29
63 . iamond and boron nitride tools Ñ.6. iamond files IPROFIL BE diamond machine files shank Ø, total length 90 Original IPROFIL IPROFIL LE diamond machine files, shank Ø, galvanic bonding imensions Coating length; otal length; ype Order No. from 5 pieces Flat 4 x BE x BE x BE Round Ø BE Ø BE Ø BE hree-square.5 x.5 x BE x.5 x BE x.5 x BE Square 2.5 x BE x BE x BE Halfround 5 x BE x BE x BE Crossing 5 x BE x BE x BE Sets Order No. iamond machine file set IPROFIL BE Contents: 6 files iamond machine file set IPROFIL BE Contents: 6 files iamond machine file set IPROFIL BE Contents: 6 files 0 el. +49 (0) / Fax +49 (0) / info@joke.de
64 . iamond and boron nitride tools Ñ.6. iamond files LGB diamond machine files shank Ø 5, total length 180 LGB diamond machine files, shank Ø 5, galvanic bonding imensions Coating length; otal length; ype Order No. Flat 10 x LGB x LGB x LGB Round Ø LGB Ø LGB Ø LGB hree-square LGB LGB LGB Square 4.5 x LGB x LGB x LGB Halfround 8.5 x LGB x LGB x LGB Sets Order No. iamond machine file set LGB Contents: 5 files iamond machine file set LGB Contents: 5 files iamond machine file set LGB Contents: 5 files el. +49 (0) / Fax +49 (0) / info@joke.de 1
65 . iamond and boron nitride tools Ñ.6. iamond files LG-F diamond machine files shank Ø 5.5 x 25, total length 150 LG-F diamond machine files, shank Ø 5.5 x 25, galvanic bonding imensions Coating length; otal length; ype Order No. Flat 10 x LG-F x LG-F x LG-F Round Ø LG-F Ø LG-F Ø LG-F hree-square 10 x LG-F x LG-F x LG-F Square 5 x LG-F x LG-F x LG-F Halfround 11 x LG-F x LG-F x LG-F Sets Order No. iamond machine file set LG-F Contents: 5 files iamond machine file set LG-F Contents: 5 files iamond machine file set LG-F Contents: 5 files 2 el. +49 (0) / Fax +49 (0) / info@joke.de
66 . iamond and boron nitride tools Ñ.6. iamond files LM diamond machine files total length 150 / 200 LM diamond machine files, galvanic bonding imensions Coating length; otal length ype Order No. Flat 9.0 x LM x LM x LM x LM / / 200 el. +49 (0) / Fax +49 (0) / info@joke.de
67 . iamond and boron nitride tools Ñ.6. iamond files IPROFIL BH diamond hand files shank Ø, total length 140 Original IPROFIL IPROFIL BH diamond hand files, shank-ø, galvanic bonding imensions Coating length; otal length; ype Order No. Flat 6 x BH x BH x BH Flat, rounded 6 x BH x BH x BH Round Ø BH Ø BH Ø BH hree-square BH BH BH Square 2.5 x BH x BH x BH Crossing 5 x BH x BH x BH Knife 1.7 x BH x BH x BH Pointed 5.4 x BH x BH x BH Barette 6 x BH x BH x BH Halfround 5 x BH x BH x BH el. +49 (0) / Fax +49 (0) / info@joke.de
68 . iamond and boron nitride tools Ñ.6. iamond files Original IPROFIL IPROFIL BH diamond hand files shank Ø, total length 140 Sets Order No. iamond grinding point set IPROFIL BH, 10 pieces el. +49 (0) / Fax +49 (0) / info@joke.de 5
69 . iamond and boron nitride tools Ñ.6. iamond files LH diamond hand files shank Ø, total length 140 HL diamond hand files shank Ø, galvanic bonding imensions Coating length; otal length; ype Order No. Flat 5 x LH x LH x LH å ç é Flat, rounded 5 x LH x LH x LH Round Ø LH Ø LH Ø LH å ç é hree-square LH LH LH å ç é Square 2.5 x LH x LH x LH å ç é Halfround 5.5 x LH x LH x LH å ç é Crossing 5 x LH Knife 5 x LH x LH x LH Pointed 5 x LH Barette 5 x LH Sets Order No. å ç é iamond hand files LH, 5 pieces
70 . iamond and boron nitride tools Ñ.6. iamond files Original IPROFIL IPROFIL L diamond hand files shank Ø, total length 140 IPROFIL L diamond hand files, shank Ø, galvanische Bond imensions Coating length; otal length; ype Order No. Flat 2.0 x L x L Flat, bent.2 x L Round Ø L Round, bent Ø L hree-square.0 x L Square 2.5 x L Halfround 5.0 x L Crossing 4.0 x L Knife 5.0 x L Set Order No. iamond hand file set IPROFIL L, 10 pieces el. +49 (0) / Fax +49 (0) / info@joke.de 7
71 . iamond and boron nitride tools Ñ.6. iamond files LK diamond hand files shank Ø 2.2 x 2.2, total length 140 LK diamond hand files, shank Ø 2.2 x 2.2, galvanic bonding imensions Coating length; otal length; ype Order No. Flat 4 x LK x LK x LK x LK Round Ø KL Ø KL Ø KL Ø KL hree-square.2 x KL x KL x KL x KL Square 1.8 x KL x KL x KL x KL Halfround 4.1 x KL x KL x KL x KL Sets Order No. iamond hand files LK, 5 pieces el. +49 (0) / Fax +49 (0) / info@joke.de
72 . iamond and boron nitride tools Ñ.6. iamond files Original IPROFIL IPROFIL LN diamond hand files shank Ø 2.2 x 2.2, total length 140 IPROFIL LN diamond hand files, shank 2.2 x 2.2, galvanic bonding imensions Coating length; otal length; ype Order No. Flat 4.0 x LN x LN x LN Round Ø LN Ø LN Ø LN hree-square.0 x LN x LN x LN Square 1.9 x LN x LN x LN Semicircular 4.0 x LN x LN x LN Crossing 4.0 x LN x LN x LN Barette 4.1 x LN x LN x LN Sets Order No. iamond hand file set IPROFIL LN, 7 pieces el. +49 (0) / Fax +49 (0) / info@joke.de 9
73 . iamond and boron nitride tools Ñ.6. iamond files IPROFIL LQ diamond hand files shank Ø 4, total length 200 Original IPROFIL IPROFIL LQ diamond hand files, shank Ø 4, galvanic bonding imensions Coating length; otal length; ype Order No. Flat 8,5 x 1, LQ Round Ø 4, LQ hree-square 4, LQ Square,5 x, LQ Halfround 7,0 x 2, LQ Set Order No. iamond hand file set IPROFIL LQ, 5 pieces el. +49 (0) / Fax +49 (0) / info@joke.de
74 . iamond and boron nitride tools Ñ.6. iamond files NEW! XS diamond hand files shank Ø 2-, total length 140 XS diamond hand files, shank-ø 2-, galvanic bonding imensions Coating length; otal length; ype Order No. from 10 pieces Flat 5.1 x XS x XS x XS Round Ø XS Ø XS Ø XS hree-square XS XS XS Square XS XS XS Halfround.8 x XS x XS x XS i XS = EXRA NARROW Flat files are ideal for working in narrow slots. When there is barely space for a sheet in between, these extra flat files with diamond coating are ideal. hey allow you to access slots, which you have only been dreaming about. Sets Order No. iamond hand file set XS, 5 pieces el. +49 (0) / Fax +49 (0) / info@joke.de 41
75 . iamond and boron nitride tools Ñ.6. iamond files LG diamond hand files shank Ø 6 x 6, total length 215 LG diamond hand files, shank Ø 6 x 6, galvanic bonding imensions Coating length; otal length; ype Order No. Flat 10 x LG x LG x LG Round Ø LG Ø LG Ø LG hree-square LG LG LG Square LG LG LG Halfround 12.5 x LG x LG x LG Sets Order No. iamond hand files LG, 5 pieces el. +49 (0) / Fax +49 (0) / info@joke.de
76 . iamond and boron nitride tools Ñ.6. iamond files Original IPROFIL IPROFIL LG diamond hand files shank Ø 6 x 6, total length 215 IPROFIL LG iamond hand files, shank Ø 6 x 6, galvanic bonding imensions Coating length; otal length; ype Order No. Flat 10 x LG Round Ø LG hree-square LG Square LG Halfround 12 x LG Set Order No. iamond hand file set IPROFIL LG, 5 pieces el. +49 (0) / Fax +49 (0) / info@joke.de 4
77 . iamond and boron nitride tools Ñ.6. iamond files LR diamond riffle hand files otal length 150 LR diamond riffle hand files galvanic bonding imensions Coating length; otal length; ype Order No. Flat 2.5 x x LR x x LR x x LR Round Ø x LR Ø x LR Ø x LR Round, bent Ø x LR Ø x LR Ø x LR hree-square x LR x LR x LR Square 2.6 x x LR x x LR x x LR Square, flat 2 x 2 2 x LR x 2 2 x LR x 2 2 x LR Crossing.8 x x LR x x LR x x LR matching holder Order No. Riffle file holder RFH el. +49 (0) / Fax +49 (0) / info@joke.de
78 . iamond and boron nitride tools Ñ.6. iamond files Original IPROFIL IPROFIL LX diamond hand files shank 5 x 5 / 10 x, total length 200 IPROFIL LX diamond hand files, galvanic bonding imensions Coating length otal length Shank dimensions; ype Order No. Flat 11.0 x x 151 LX Round Ø x LX hree-square x 151 LX Square x LX Halfround 10.5 x x 151 LX Set Order No. iamond hand file set IPROFIL LX, 5 pieces Original IPROFIL IPROFIL KS diamond ruler IPROFIL KS diamond ruler imensions A x C Coating dimensions B otal length L Order No. Blank in stainless steel. Galvanic coating 25 x x A B C L el. +49 (0) / Fax +49 (0) / info@joke.de 45
79 . iamond and boron nitride tools Ñ.6. iamond files JOKE Multi diamond hand files Ñ JOKE Multi diamond hand files Extra thin diamond files. For use mainly in plastic mould technology and in processing aluminium extrusion tools. he conical files are suitable for processing ribs. ip: In combination with the JOKE Multimaster, these files can also be used mechanically. Set: JOKE Multi diamond hand files SE 1 Order No consists of: 1 Multi-Grip handpiece 1 storage box 1 key 4 files: MS 15-0 MS MS 25-0 MS Set: Order No. JOKE Multi diamond hand files - SE 2 as above, but with the following 4 files: MS MS MS MS Set: Order No. JOKE Multi diamond hand files - SE as above, but with the following 4 files: MS 25-0 MS MS MS JOKE Multi diamond hand files Coating measurements otal length; ype Order No. Flat 15 x 15 x MS x 15 x MS x 15 x MS x 15 x MS x 25 x MS x 25 x MS x 25 x MS x 25 x MS Conical 15 x 15 x MS 15x x 15 x MS 15x x 15 x MS 15x x 15 x MS 15x el. +49 (0) / Fax +49 (0) / info@joke.de
80 . iamond and boron nitride tools Ñ.6. iamond files WF diamond toolshop files coating length 180, total length 220 WF diamond workshop files, galvanic bonding imensions Coating length; otal length; ype Order No. Flat 5 x WF x WF x WF hree-square WF WF WF Square 8 x WF x WF x WF Halfround 6 x WF x WF x WF Round Ø WF Ø WF Ø WF NEW! WF-K diamond toolshop files coating length 160, total length 200 WF-K diamond workshop files, galvanic bonding imensions Coating length; otal length; ype Order No. Flat 5 x WF-K hree-square WF-K Square WF-K Halfround Ø 6 x WF-K Round Ø WF-K el. +49 (0) / Fax +49 (0) / info@joke.de 47
81 . iamond and boron nitride tools Ñ.6. iamond files IPROFIL LM Conical diamond machine files shank Ø x 5, total length 90 Original IPROFIL IPROFIL LM Conical diamond machine files, shank Ø x 5 Coating dimensions B x LB Rasp thickness C/C1 Shank dimensions S/S1; otal length 2.5 x 0 0./1.6 Ø x /1.6 Ø x /1.6 Ø x /1.6 Ø x Order No. from 10 pieces from 1 piece 4 x 0 0./1.4 Ø x /1.4 Ø x /1.4 Ø x /1.4 Ø x x 0 0./1.6 Ø x /1.6 Ø x /1.6 Ø x /1.6 Ø x S C1 B S1 LB C Sets Order No. IPROFIL LM Conical diamond machine file set, 6 pieces 46/ / / el. +49 (0) / Fax +49 (0) / info@joke.de
82 . iamond and boron nitride tools Ñ.6. iamond files NEW! LSF Conical diamond machine files shank Ø x 20, total length 56/72 LSF Conical diamond machine files, shank Ø x 20 Coating dimensions B x LB Rasp thickness C/C1 Shank dimensions S/S1 otal length Order No. from 10 pieces from 1 piece S C1 B x / 0.9 Ø x # / 0.9 Ø x # S1 LB C 0.5/ 0.9 Ø x # / 1. Ø x # / 1. Ø x # / 1. Ø x # x / 0.9 Ø x # / 0.9 Ø x # / 0.9 Ø x # / 1. Ø x # / 1. Ø x # / 1. Ø x # Set: Order No. Conical diamond machine files LSF, 12 pieces el. +49 (0) / Fax +49 (0) / info@joke.de 49
83 . iamond and boron nitride tools Ñ.6. iamond files LC Conical diamond machine files shank Ø 4 x 1 x 15, total length 7 NEW! LC Conical diamond machine files, shank 4 x 1 x 15 Coating dimensions B/B1 x LB Rasp thickness C/C1 Shank dimensions S/S1; otal length Order No. from 5 pieces from 1 piece S B1 LB B 2/ x / 1 4 x 15 7 # / 1 4 x 15 7 # S1 C1 C 0.5/ 1 4 x 15 7 # /4 x / 1 4 x 15 7 # / 1 4 x 15 7 # / 1 4 x 15 7 # / 1 4 x 15 7 # /6 x / 1 4 x 15 7 # / 1 4 x 15 7 # / 1 4 x 15 7 # Set: Order No. Conical diamond machine file set LC, 10 pieces LFL Conical diamond machine files shank Ø 8 x 1 x 20, total length 60/70/90 NEW! LFL Conical diamond machine files, shank 8 x 1 x 20 Coating dimensions B/B1 x LB Rasp thickness C/C1 Shank dimensions S/S1; otal length Order No. from 5 pieces from 1 piece S S1 C1 B1 LB B C 2/4 x / 1 8 x # / 1 8 x # / 1 8 x # /4 x / 1 8 x # / 1 8 x # / 1 8 x # /6 x / 1 8 x # / 1 8 x # / 1 8 x # /6 x / 1 8 x # / 1 8 x # / 1 8 x # matching file holder Order No. File holder Ø 11 x 120 for conical diamond files el. +49 (0) / Fax +49 (0) / info@joke.de
84 . iamond and boron nitride tools Ñ.6. iamond files IPROFIL LL Conical diamond hand files shank Ø, total length 10 IPROFIL LL Conical diamond hand files, shank Ø Coating dimensions B/B1 x LB Rasp thickness C/C1 Shank dimensions S/S1; otal length 0.5/ x /.0 Ø x Order No. from 10 pieces from 1 piece Round file 2.5 x / 1.6 Ø x / 1.6 Ø x / 1.6 Ø x x / 1.6 Ø x / 1.6 Ø x / 1.6 Ø x x / 1.6 Ø x / 1.6 Ø x / 1.6 Ø x S1 B S C1 LB C Set: Order No. Conical diamond machine file set IPROFIL LL, 10 pieces Plastic covering for hand files Colour Order No. Ø 5 x 55, for hand files with shank Ø yellow black blue el. +49 (0) / Fax +49 (0) / info@joke.de 51
85 . iamond and boron nitride tools Ñ.6. iamond files LP Conical diamond hand files shank Ø, total length 10 LP Conical diamond hand files with plastic covering, shank Ø Round file Coating dimensions B/B1 x LB Rasp thickness C/C1 Shank dimensions S/S1; otal length 0.2/ x / Ø x # Order No. from 10 pieces from 1 piece S1 S C1 LB B C 2 x 0 0.5/ 1.9 Ø x # / 1.9 Ø x # / 1.9 Ø x # x 0 0.5/ 1. Ø x # / 1. Ø x # / 1. Ø x # x 0 0.5/ 1. Ø x # / 1. Ø x # / 1. Ø x # Set: Order No. Conical diamond hand file set LP, 10 pieces File holder Order No. File holder for conical diamond files LP Conical diamond hand files LV shank Ø 4/ 6 / 8, total length 120 Conical diamond hand files LV, shank Ø 4/ 6 x 120 Coating dimensions B/B1 x LB Rasp thickness C/C1 Shank dimensions S/S1; otal length Order No. from 10 pieces from 1 piece S1 B1 B 2/ x / 2 4 x # / 2 4 x # S C1 LB C 0.5/ 2 4 x # /4 x / 2 4 x # / 2 4 x # / 2 4 x # /6 x / x # / x # / x # /8 x / x # / x # / x # Set: Order No. Conical diamond hand file set LV, 12 pieces el. +49 (0) / Fax +49 (0) / info@joke.de
86 . iamond and boron nitride tools Ñ.6. iamond files IPROFIL LS Conical diamond hand files shank Ø 4 / 6 / 8, total length 170 IPROFIL LS Conical diamond hand files, shank Ø 4 / 6 / 8 Coating dimensions B/B1 x LB Rasp thickness C/C1 Shank dimensions S/S1; otal length 2/ x / x Order No. from 10 pieces from 1 piece /4 x / x / x / x /6 x / x / x / x /8 x / x / x / x S1 B1 B S C1 LB C Set: Order No. Conical diamond hand file set IPROFIL LS, 10 pieces el. +49 (0) / Fax +49 (0) / info@joke.de 5
277 Diamond spring steel wires. 278 Diamond hand lappers. 279 Diamond grinding discs. 285 Diamond abrasive sheets. 286 Diamond-coated PET strips
3. iamond and CBN tools iamond and CBN tools Overview iamond and CBN grinding points 256 261 260 260 iamond and CBN grinding point sets iamond cut-off discs iamond point IAIP 269 iamond hollow drill 276
More information304 Diamond point DIATIP. 320 Diamond spring steel wires. 321 Diamond hand lappers. 328 Diamond abrasive sheets. 329 Diamond-coated strips
1. iamond and CBN tools iamond and CBN tools Overview iamond and CBN grinding points 9 99 00 iamond cut-off discs iamant- und CBN grinding point sets 0 iamond point IAIP 09 iamond hollow drill 19 iamond
More informationDiamond and CBN tools Overview
. Diamond and CBN tools Diamond and CBN tools Overview 9 Diamond and CBN grinding points Diamond cut-off discs Diamond point DIATIP Diamond hollow drill 0 CBN grinding point sets Diamond honing tools Diamond
More informationStep drills And, with higher dimensional precision the drills will last considerably longer while maintaining the precise process tolerances.
» STEP DRILLS Step drills The flutes of RUKO high performance step drills are CBN ground from the solid hardened form. Because CBN (cubical boron nitride) is a much harder abrasive than even silicium carbide
More informationCOMPETENCE IN PRECISION AND QUALITY STEP DRILLS
COMPETENCE IN PRECISION AND QUALITY STEP DRILLS Product information The flutes of new RUKO high performance step drills are CBN ground from the solid hardened form. Because CBN (cubical boron nitride)
More information343 Accessories for milling. 357 Carbide milling cutters Sets. 361 Gravers, solid carbide metal. 369 Deburring knife. Chipping tools Overview
. Chipping tools Chipping tools Overview Accessories for milling Miniature carbide milling cutters/finishers 9 Carbide milling cutters, shank Ø, mm Milling cutters for processing aluminium Engraver s milling
More information343 Accessories for milling. 357 Carbide milling cutters Sets. 361 Gravers, solid carbide metal. 369 Deburring knife. Chipping tools Overview
. Chipping tools Chipping tools Overview Accessories for milling Miniature carbide milling cutters/finishers 9 Carbide milling cutters, shank Ø, mm Milling cutters for processing aluminium Engraver s milling
More informationStep drills. And, with higher dimensional precision the drills will last considerably longer while maintaining the precise process tolerances.
STUFENBOHRER FORETS TRAPPENBOREN TRINBOR FRESE BROAS STUPŇOVITÉ WIERTŁA СТУПЕНЧАТЫЕ BURGHIE KADEMELİ STOPNIČASTI STEPENASTA LÉPSŐS PAKOPINIAI DRILLS A ÉTAGÉS ESALONADAS GRADINI STOPNIOWE ÎN FÚRÓ sac GRĄŽTAI
More information158 Rubber-bonded grinding tools. 86 Compounds and fluids. 174 Grinding and polishing stones. 106 Felts and cloths. 214 Ceramic-fibre tools
. Grinding and polishing tools 86 Compounds and fluids 158 Rubber-bonded grinding tools 174 Grinding and polishing stones 106 Felts and cloths 14 Ceramic-fibre tools 116 Lapping tools 130 Polishing brushes
More information132 Drilling brushes. 200 Ceramic-fibre tools. 232 Grinding stars Polistar. 238 Emery sheets and strips. Grinding and polishing tools Overview
. Grinding and polishing tools Grinding and polishing tools Overview Diamond compound polishing system joke Magic 74 90 9 10 Lapping, polishing and grinding compounds Felts and cloths Lapping tools 114
More informationALUMINIUM ROLLERS MADE IN ITALY
ALUMINIUM ROLLERS MADE IN ITALY Alveolar aluminium rollers, diameter 60mm to 250mm (natural or anodized). Roller manufacturing will be completely based on customer's drawings. The rollers can be supplied
More informationDÖRRIES SCHARMANN ECOSPEED HSK-A63/80 STARRAG WERKZEUGAUFNAHMEN TOOL HOLDERS HSK A63/80.
DÖRRIES SCHRMNN ECOSPEED HSK-63/80 STRRG STC TOO 800X HODERS WERKZEUGUFNHMEN TOO HODERS HSK 63/80 www.haimer.com POWER SHRINK CHUCK HSK 63/80 (TPER 63 mm/fnge 80 mm) 10 4.5 D3 CERTIFICTE OF QUITY ll functional
More informationgrinding wheels 322 z Cloth z With centre hole z Combi z Convolute z Unitized z Spindle mounted
320 grinding wheels z With centre hole 322 z Cloth 322 z Tex 326 z CSD 329 z Combi 330 z Convolute 332 z Unitized 334 z Spindle mounted 338 z Cloth 338 z Tex 342 z Combi 345 z CSD 348 z Unitized 349 Cibo
More informationteckentrup-sperrkant The Original
teckentrup-sperrkant The Original www.teckentrup.de New Serrated Locking Washer NSK Innovative Screw and Bolt Locking Technology» Reliable bolt locking at low and high preload forces» Locking function
More informationMachine volt/hz Watt r.p.m. kg Plug R ref. ES / EU
ES EP EU STR: Single discs Machine volt/hz Watt r.p.m. kg Plug R ref. ES 330 ES 330 230/50 600 165 22 EU 611500 ES 420 ES 420 duo 230/50 1300/1600 140/280 48 EU 612400 ES 420 230/50 1200 175 40 EU 614205
More informationPOLISHING MATERIALS. z Introduction 380. z Polishing wheels 380. z Finimaster wheels 384. z Felt discs 385. z Compound sponges 388.
378 z Introduction 380 z Polishing wheels 380 z Sisal 380 z Sewn 380 z Cotton 380 z Single 380 z Sewn 381 z Ventilated 381 z Flannel 382 z Sewn 382 z Ventilated 382 z Finimaster wheels 384 z Finimaster
More informationFLEXIBLE DUCT. Providing comfort to Australia
FLEXIBLE DUCT Duct Core Firebreak Duct R0.6 Firebreak Duct R1.0 Firebreak Duct R1.5 Firebreak Duct Plus 4 Zero Firebreak Duct Silent Firebreak Duct Superior R2.0 58 59 60 61 62 63 64 Providing comfort
More informationBrilliant solutions for perfect surfaces NEW PRODUCTS
Brilliant solutions for perfect surfaces NEW PRODUCTS 2009 Battery deburring system MVK-line Page 04 Rapid-Change for ENESKA 3-1 Page 6 Storage suitcase for ENESKA systems Page 08 Hand filing machine DIPROFIL
More informationLaparoscopic Reusable Trocars and Sleeves
High quality trocars and sleeves are essential during multi-puncture, minimally invasive surgical procedures. Our wide range of reusable trocars and sleeves are more economically beneficial and technologically
More informationROUNDO Section Bending Machines Type R-1 through R-21-S
ROUNDO Section Bending Machines Type R-1 through R-21-S Friläggas 1 Roundo Section Bending Machines - Largest selection on the market ROUNDO is the worlds leading manufacturer of plate and section bending
More informationM-Series, Actuator Overview. Machine Screw Cutaway. UNI-LIFT Machine Screw Actuators offer precise. 12
M-, Actuator Overview UNI-LIFT Machine Screw Actuators offer precise positioning, uniform lifting speeds and capacity up to 250 tons. Standard model configurations include upright or inverted units with
More informationCITY OF WHITE HOUSE REQUEST FOR BID FOR PORTLAND ROAD LIFT STATION DRY PIT SUBMERSIBLE PUMP. August 22, 2017
CITY OF WHITE HOUSE REQUEST FOR BID FOR PORTLAND ROAD LIFT STATION DRY PIT SUBMERSIBLE PUMP August 22, 2017 105 College Street White House, Tennessee, 37188 Page 1 of 9 CITY OF WHITE HOUSE REQUEST FOR
More informationB-Series Section Overview. Ball Screw Cutaway. UNI-LIFT Ball Screw Actuators provide high. 34
B- Section Overview UNI-LIFT Actuators provide high efficiency and high speed in a linear positioning package up to 100 tons. The low friction ball screw and nut design provides longer life at load and
More informationTrocar Systems. Complete and efficient. Trocar systems
Trocar Systems Complete and efficient Trocar systems Quality workmanship: PAJUNK Trocar systems Requirements for a trocar system vary greatly. The type and length of the respective surgical procedure has
More informationAir Grinders with Collets
Screwdriving technology Automation Air motors Air tools Air Grinders with Collets AngleHead Design Power Output: 130 W, 300 W, 700 W (.17 /.40 /.94 HP) highest power output at a low weight ergonomic highly
More informationteckentrup-sperrkant The Original
teckentrup-sperrkant The Original New NSK detent-edged washer Innovative screw locking technology Reliable screw locking protects against loosening and unscrewing where high vibration is present Settling
More informationD.T.D Ministry of Defence Defence Procurement Agency, ADRP2 Abbey Wood Bristol BS34 8JH OBSOLESCENCE NOTICE
Ministry of Defence Defence Procurement Agency, ADRP2 Abbey Wood Bristol BS34 8JH D.T.D.5036 OBSOLESCENCE NOTICE All DTD specifications were declared obsolescent from 1 st April 1999. All DTD 900 series
More informationCase studies Vertical bearing GGG40 (GJS )
Vertical bearing GGG40 (GJS-400-15) Machine: MC HSK63 Material: GGG 40 (EN-GJS-400-15) Parts/Year: ca. 100 000 Pre-machining: boring Coolant : Minimum quantity lubrication (MQL) Ø 33N5 x 142mm MQL CircoTec
More informationTECHNOLOGY FOR THE WELDER S WORLD. MIG/MAG CATALOG 4.1. MIG/MAG Welding Technology for all Metalworking Industries.
TECHNOLOGY FOR THE WELDER S WORLD. MIG/MAG CATALOG 4.1 MIG/MAG Welding Technology for all Metalworking Industries. www.binzel-abicor.com Index MIG/MAG welding torches (wear parts system MB) MB EVO PRO
More informationDiamond Sawblades and Parts Thereof from the People s Republic of China: Initiation of Anti-Circumvention Inquiry
This document is scheduled to be published in the Federal Register on 12/07/2017 and available online at https://federalregister.gov/d/2017-26398, and on FDsys.gov BILLING CODE: 3510-DS-P DEPARTMENT OF
More informationPIPING, VALVES AND JOINTS
Piping and accessories... page 208-209 PVC Valves... page 210-213 Clamp saddle... page 213 Clapet Valve, Hose Holder Joints, Galvanised Collar... page 214 Compression connections... page 215 Pasting PVC
More informationA C O R N 4 1 S E R I E S S T A I N L E S S S T E E L R A N G E A mm Straight Lever on concealed bearing rose A4103.
41 SERIES Tubular A4100 19mm Straight Lever A4101 A4102 16mm Straight Lever 19mm Straight Lever on concealed sprung rose Tubular A4103 16mm Safety Lever on concealed sprung rose A4104 A4105 A4106 A4107
More informationTHE WORLD OF EXTRACTION PRICE LIST.
THE WORLD OF EXTRACTION PRICE LIST 2017 We look forward to receiving your order In the price list you will find the complete range of ESTA equipment and all available accessories with order number and
More informationBID RESPONSE LABEL THIS LABEL FOR USE WITH UNITED STATES POSTAL SERVICE DELIVERY RECONDITION MUFFIN MONSTER ELECTRIC (DATE): DEC.
BID RESPONSE LABEL Proposals sent by U.S. Mail should be addressed to Director of General Services, Town of Manchester, 494 Main Street, P.O. Box 191, Manchester, CT 06045-0191. Proposals hand delivered
More informationfiber optic through-beam and dif. reflection sensors
ipf electronic gmbh Kalver Straße 25 27 through-beam sensors diffuse reflection sensors accessories fiber optic through-beam and dif. reflection sensors plastic optic fibers 1800 1 2 1800 plastic fiber
More informationINK/DOCTORING CUPS. For all hermetic standard pad printing machines. Ink/doctoring cup 1-, 2-, 3-colour
ACCESSORIES INK/DOCTORING CUPS ACCESSORIES PAD printing machines For all hermetic standard pad printing machines Ink/ cup 1-, 2-, 3-colour Thrust collar 2-colour for hermetic pad printing machines Ø 90
More informationTT SERIES OD ORBITAL CUTTING & BEVELING MACHINES 1/8 TO 168 OD 1/9
TT SERIES OD ORBITAL CUTTING & BEVELING MACHINES 1/8 TO 168 OD PRACTICAL TOOLS INC. P.O. Box 233 Aurora, ON L4G 3H3, Canada Phone: 905-727-0014 / 888-847-8880 Fax: 905-727-8483 info@practicaltoolsinc.com
More information2015 SOM Ballot Number 1. No/No Vote. Sponsored by Technical Section 3a
2015 SOM Ballot Number 1 Sponsored by Technical Section 3a 1 2 3 4 5 6 7 8 9 10 11 Concurrent ballot item to revise M 240 to remove MBI and TOC requirements. See page 3, 37 & 39-44. 44 2/6 Concurrent ballot
More informationAn Urgent Bulletin from CSA Group
An Urgent Bulletin from CSA Group Occupational Health & Safety Products No. 114 Effective Date: June 1, 2019 Date: May 24, 2018 Apply Before December 1, 2018 Announcing: Publication of ASTM F2413-17 Standard
More informationStainless Steel Gas Springs
Stainless Steel Gas Springs Gas Springs in 4 (V2A) Stainless Steel As well as its very extensive range of standard adjustable force gas springs ACE can offer a wide range of stainless steel gas springs.
More informationUSTOMED Flexi-Kit Smart. Flexible. Individualized.
USTOMED Flexi-Kit Smart. Flexible. Individualized. www.ustomed.de One Set 1001 Options Create your own set for all common implantological indications. Competence in Instruments MADE IN GERMANY Start to
More informationrecool for lathes Fast and easy retrofitting to internal cooling with oil and emulsion
recool for lathes Fast and easy retrofitting to internal cooling with oil and emulsion www.rego-fix.com External flood cooling Peripheral cooling Internal cooling The differences of wet and dry machining
More informationPPG Series High Precision Gearbox. Datasheet
PPG Series High Precision Gearbox Datasheet Version PPG-2014-01 http://www.primopal.com Description PrimoPal s PPG series High Precision Planetary Gearboxes are mainly used with kinds of servo motors and
More informationDIAPHRAGM VACUUM PUMPS AND COMPRESSORS
DIAPHRAGM VACUUM PUMPS AND COMPRESSORS DATA SHEET N 816 N 816 KNE (w/ AC motor) N 816 KN.29DC-B-M (w/ standard-life BLDC motor) N 816 KN.29DC-B (w/ long-life, multi-function BLDC motor) Concept The diaphragm
More informationmicrun System The ultimate precision toolholding system
micrun System The ultimate precision toolholding system Product catalog Company profile Providing solutions for cutting-edge tool clamping Product offering 4 Medical engineering with micrun 6 1.0 MR colletholders
More informationHOT WORK PROGRAM OSHA
HOT WORK PROGRAM 1910.252 OSHA Table of Contents Purpose... 3 Definitions... 3 Responsibilities... 3 Hot Work Permitted Locations... 5 Fire Prevention Precautions... 5 Personal Protective Equipment...
More informationHYPE. Cementless Acetabular Cup SURGICAL TECHNIQUE
HYPE Cementless Acetabular Cup SURGICAL TECHNIQUE Contents Range of acetabular cups 4 Implant references 6 Surgical technique 7 Instrumentation 12 Access to the dematerialized IFU 14 SERF CEMENTLESS PRESSFIT
More informationREAMERS YE-RM18. HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South Korea Phone:
YERM REAMERS CARBIDE / HSSE NC MACHINE REAMERS HSS HAND REAMERS HSSE CHUCKING REAMERS HEAD OFFICE, Sewolcheonro, Bupyeonggu, Incheon, South Korea Phone: +00 Http://www.yg.kr Email:yg@yg.kr Note The new
More informationDAS Series Submersible Waste Water and Sewage Pumps
art DAS Series Submersible Waste Water and Sewage s ALICATIONS: ing of domestic and industrial sewage At sewage treatment plants ing of chemical and industrial waste water. ing of rain water All kinds
More informationMIG/MAG Welding Torch MB 401 D / MB 501 D. liquid-cooled. ABICOR BINZEL. The right welding torch for every job!
MIG/MAG Welding Torch MB 401 D / MB 501 D liquid-cooled C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M ABICOR BINZEL. The right welding torch for every job! BINZEL liquid cooled welding torches incorporate
More informationTHE NEXT SENSATION by Alpha-Bio Tec. Experience NeO to fully understand how brilliant it is!
by Alpha-Bio Tec. 1 THE NEXT SENSATION by Alpha-Bio Tec. Alpha-Bio Tec. is proud to present the next sensation of dental solutions - the NeO implant system. NeO is the next generation of the company s
More informationFeel the quality, be exclusive. Cartridge Guide 1
Feel the quality, be exclusive Guide 1 Index High Technology for quality soldering 4 Bigger is better 6 Factors limiting life of tips 7 Cleaning systems 8 C105 s range 12 C120 s range 16 C130 s range 18
More informationPerfect sealing, a guarantee of economy
RCS Compressed air Perfect sealing, a guarantee of economy 1 2 3 he problem 15 to 30% of compressed air is lost by leakage between the compressor and the tool. he calculation A 1mm hole in your circuit
More informationChapter Five: Forces. Ø 5.1 Forces. Ø 5.2 Friction. Ø 5.3 Forces and Equilibrium
Chapter Five: Forces Ø 5.1 Forces Ø 5.2 Friction Ø 5.3 Forces and Equilibrium 5.1 The cause of forces Ø A force is a push or pull, or an action that has the ability to change motion. Ø Forces can increase
More informationDIAPHRAGM VACUUM PUMPS AND COMPRESSORS
DIAPHRAGM VACUUM PUMPS AND COMPRESSORS DATA SHEET N 816 N 816 KNE N 816 KN.29DC-B-M N 816 KN.29DC-B Concept The diaphragm pumps from KNF are based on a simple principle an elastic diaphragm, fixed on its
More informationCITY OF KINGSTON. Ontario. By-Law Number A By-Law To Regulate Fences. By-Law Number: Date Passed: September 9, 2014
CITY OF KINGSTON Ontario By-Law Number 2003-405 A By-Law To Regulate Fences Passed: November 4, 2003 As Amended By By-Law Number: By-Law Number: Date Passed: 2014-140 September 9, 2014 (Office Consolidation)
More information38 Lucerna - LED 01E LED_AU_Lucerna.indd 38 27/12/16 10:39
38 Lucerna - LED Lucerna - LED Technical Specifications: Housing, lid, spokes, and connection for die-cast aluminium pressed poles. Diffuser: Tempered glass, 5 mm thick, withstands thermal shock and impacts.
More informationIPC/WHMA-A-620B TRAINING AND CERTIFICATION PROGRAM FOR CERTIFIED IPC TRAINERS (CIT)
5. Module(s) are prerequisite training for IPC/WHMA-A-620 Certified IPC Application Specialist (CIS) certification. A. 1 and 3 B. 1 and 2 C. 1 through 18 D. 1 Answer: D Reference: Lecture 6. CITs should
More informationAXILOCK PIPE TEEKAY COUPLINGS
TEEKAY AXILOCK PIPE COUPLINGS Ultra high security axial restraint pipe coupling system for plain ended pipes Original patented double casing design GL LR DNV BV ABS RINA approved Frequently specified for
More informationMax. flow absorbed (l/mn) Torque (N.m/bar) R
M series motors Characteristics of the m series motors Motor model Displacement (cc/rev) Continuous max. speed (1) (rpm) Intermittent max. speed (1) (rpm) Max. flow absorbed (l/mn) Torque (N.m/bar) Torque
More informationE Series Back Pull Out End Scution. Centrifugal Pump DIN 24255
Back Pull Out End Scution Centrifugal Pump DIN 24255 MARKET SECTORS Buidling Services, RHVAC, Agriculture, Civil, Industries Back Pull Out End Suction Centrifugal Pump DIN 24255 MATERIAL OF CONSTRUCTION
More informationBone-Fixation-Set and Pin-Set
and Pin-Set www.ustomed.de Implant-Steel in Ø 1,0 mm Innovations made by USTOMED Competence in Instruments Skilled and experienced surgical mechanics create top-quality instruments MADE BY HAND Technical
More informationOther variations which are not mentioned in this document are on demand (if possible).
GENERAL INFORMATION This specification document is for gas-filled thermometers manufactured by: STIKO, Industrieweg 5, 9301 LM Roden, The Netherlands. STIKO is a manufacturer of mechanical instruments
More informationRecent Situation of the Japanese Intellectual Property Protection Scheme
Recent Situation of the Japanese Intellectual Property Protection Scheme Japan Patent Attorneys Association 1/51 INDEX / LIST OF DOCUMENTS SECTION 1: Changes in Environments for Obtaining IP rights in
More informationMetal Bellows Couplings Servo-Insert Couplings Line Shafts
US 08 2009 Metal Bellows Couplings Servo-Insert Couplings Line Shafts Partner for performance www.gerwah.com A Global Presence For You The RINGFEDER POWER TRANSMISSION GMBH was founded in 1922 in Krefeld,
More informationPHASED OUT. LED light engine / OLED LED linear / area. Module CLE Shallow G1 ADV Modules CLE
Product description For round and and ultra flat, wall-mounted, ceiling-mounted and suspended luminaries Backlighting depth of 3 mm can be realized Wide beam chip enables high homogeneity despite low backlighting
More informationMAAG TM PPU gear unit for roller presses, horizontal mills and kilns
MAAG TM PPU gear unit for roller presses, horizontal mills and kilns 2 Our quality policy FLSmidth MAAG Gear is committed to creating long lasting relationships that establish us as a trustworthy, reliable
More informationBEL Engineering Plant List. June 2016
BEL Engineering Plant List June 2016 Horizontal Boring Mill Skoda HCW2 Floor Boring Mill Envelope X10000 x Y4000 x Z3000 Table 1 3000 x 3000 40,000 kg Table 2 2500 x 2000 20,000 kg Tool holder ISO 60 Facing
More informationStandard pumps. Dimensions, weights Wilo-CronoLine-IL
Standard pumps Dimensions, weights Wilo-CronoLine-IL Standard pumps Dimensions, weights Wilo-CronoLine-IL Subject to change without prior notice /7 WILO AG / WILO AG Special features/product advantages
More informationNE-Metalle Non-ferrous metals
NE-Metalle Non-ferrous metals aus from einer Hand a single source Non-ferrous metals Your contacts Richard Odendahl Non-ferrous metals Tel.: +49 (0) 211 509-2145 Fax: +49 (0) 211 509-1145 r.odendahl@schmolz-bickenbach.com
More informationHot Work Program. Purpose of Procedure:
BGSU Hot Work Program Page 1 Bowling Green State University Purpose of Procedure: Hot Work Program These procedures have been established to comply with Ohio s Public Employee Risk Reduction Act, the OSHA
More informationEXPERIENCE MAXIMUM QUALITY
1 EXPERIENCE MAXIMUM QUALITY Qulamax is dedicated to the success of our customers by being a world-class provider of innovative test product solutions to the semiconductor and mobile device industry. Qualmax,
More informationv.43f, no.8-34 Circuit Court, N. D. Illinois. February 10, CONSOLIDATED ROLLER-MILL CO. V. BARNARD & LEAS MANUF'G CO.
CONSOLIDATED ROLLER-MILL CO. V. BARNARD & LEAS MANUF'G v.43f, no.8-34 CO. Circuit Court, N. D. Illinois. February 10, 1890. 1. PATENTS FOR INVENTION ANTICIPATION MECHANICAL EQUIVALENTS. Patent No. 222,895,
More informationHot Work Permit Program
Environmental Health and Safety Office Hot Work Permit Program Permitting Process for welding, cutting and brazing. Adopted: March 6, 2007 Revised: 7/18/16 http://www.stlawu.edu/environmentalhealth-and-safety/environmental-healthand-safety-policies
More informationCO. ET AL. with an oscillating roll of toilet-paper, actuated in one direction by a pull upon its free
1. PATENTS FOR INVENTIONS TOILET-PAPER PACKAGES NOVELTY. Letters patent No. 325,410, granted to Oliver H. Hicks, September 1, 1885, for a package of toiletpaper, the claim of which was for a bundle of
More informationNM, NMS. Close Coupled Centrifugal Pumps with flanged connections. Construction. Applications. Operating conditions. Motor
lose oupled entrifugal Pumps The electropumps,, S, S series comply with the Regulation no. 7/ in force starting from.. European Materials omponents, S, S Pump casing ast iron ronze Lantern bracket asing
More informationROHACELL WF (dry condition) can be processed up to temperature of 130 C (266 F) and maximum pressure up to 0,7 MPa (100 PSI).
Product Info on ROHACELL WF ROHACELL WF (Grade with increased heat distortion resistance) is a closed-cell rigid foam based on PMI (polymethacrylimide) chemistry, which does not contain any CFC's. ROHACELL
More informationConduit Entry System. At a Glance. FWS Assembly. 1. Fast and Easy Assembly. 2. Easy to Maintain. 3. Flexible
Conduit Entry System At a Glance CONFIX FWS The 90 angled conduit fitting CONFIX FWS is perfect for installation of parallel corrugated cable protection conduits, e.g. in machines, control panels or other
More informationFENCING/SCREENING/LANDSCAPING
FENCING/SCREENING/LANDSCAPING Sec. 117-1127. Fences. (a) Purpose. The purpose of this section is to provide for the installation of fences and protect the public's health, safety, and general welfare.
More informationM40 Size 1.5/Size 1.5i Power Connectors
M40 Size 1.5/Size 1.5i Power Connectors Approvals Tested acc. to DIN EN 61984 UL/CSA metallic connectors Number of ways: Contact diameter: Nominal current (VDE) / 20 C: Nominal current (UL): Nominal current
More informationCEF POLYMERES. Spring. CEF POLYMERES sa.com DT.STRA.E l Fv F1 F. Strocke (S)
Spring S Sv S 0 Sv Série 0R 5R R 6 R 700R CR 0 R 4 M M 167 M Strocke Max. 35% % % 25% % U90 % 9 UR % l S Creep value compression max 4 6% 3 5% 5 7% 7 9% 8 % 5 6% 6 8% l Fv F1 F Strocke (S) The value on
More informationBase for Stable Mounting an Eco Pedestal
Eco Air Meter Stand With Inspection Door Before you buy your stand, make sure to ask the seller about the main post if he s using a 1/8 solid metal post instead of a 1/16 thin metal. Eco Top Light Full
More informationsyriq Glass Prefillable Syringes
syriq Glass Prefillable Syringes 2 3 SCHOTT is a leading international technology group in the areas of specialty glass and glass-ceramics. With more than 130 years of outstanding development, materials
More informationNovenco Axial Flow Fans. Novax St andard and hot Smoke
Novenco Axial Flow Fans Novax St andard and hot Smoke Product facts Product Axial flow fans with adjustable blades. ACN for duct installation ACG free intake with connection to duct ACP free suction and
More informationUnvalidated References: Explosives Act 1953
Unvalidated References: Explosives Act 1953 This reprint of this Statutory Instrument incorporates all amendments, if any, made before25 November 2006 and in force at 1 January 2003.... Legislative Counsel
More informationSECTION DETENTION DOOR HARDWARE
#C1305-0l SECTION 087163 - PART 1- GENERAL 1.1 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationAPPLICATION SOLUTIONS CUTTING TECHNOLOGY
APPLICATION SOLUTIONS CUTTING TECHNOLOGY THE HISTORY ABOUT THE COVER PICTURE ALFRA is expert for holes. This may initially sound a bit strange, but also very simple. In fact, we deal with various techniques
More informationData sheet: Wilo-CronoNorm-NL 80/200-3/4
Data sheet: Wilo-CronoNorm-NL /-3/ Pump curves H/m 1 1 1 1 NPSH/m,5, 1,5 1,,5 P /kw 5 3 1 3 5 55% % 5% 7% 7% 7,9% 1 5 15 5 3 35 3 5 1 3 5 7% 7,3% 7% 7% 77,9% 7,% 7,% Ø 17 Eff. 7,9% Ø 1 Ø 19 7% Ø 19 Ø 1
More informationFull Automatic Mounting Press
Full Automatic Mounting Press B/B-E3 One button start Perfect mounting Intuitive operation http://www.toptech.tw Instruction Operation video Top cover Quick release Indicator light LED display Mounting
More informationElevator and escalator electrical equipment CSA B / ASME A
Elevator and escalator electrical equipment CSA B44.1-11/ ASME A17.5-2011 Legal Notice for Harmonized Standard Jointly Developed by ASME and CSA Intellectual property rights and ownership As between The
More informationHIGH PRESSURE + STAINLESS STEEL. Rotary Union Solutions HPS. Series FLOW PASSAGE OPTIONS
RESSURE + SAESS SEE Rotary Union Solutions S Series FW ASSAE S 1 3 4 6 8 12 16 Rotary Union Solutions S Contents About DS 3 What is a Rotary Union? 4 S Series verview 5 ow o rder 6 Specifi cations & perating
More informationRequest for Proposals Tree Pruning
Request for Proposals Tree Pruning Issue Date: September 18, 2017 Deadline for Submission October 6, 2017 TREE PRUNING SPECIFICATIONS BOROUGH OF SAYRE I. Scope of Work: To provide all labor, supervision,
More informationWire rope and chain scraper
The chain scraper head enz golden jet is a highly effective multi-purpose tool designed for easy use and maintenance under rugged work conditions. All rotating chain scraper models can be adapted to a
More informationBonding solutions in e-passports
34 Bonding solutions in e-passports How adhesives contribute to secure biometric passports by Erwin Herzog In this article, Erwin Herzog describes how adhesives contribute to secure biometric and non-biometric
More informationGEAR PUMPS. Displacement from 10 to 100 ccm Pressure up to 290 bar Speed from 350 to 3200 RPM
Displacement from 10 to 100 ccm Pressure up to 290 bar Speed from 350 to 3200 PM GEA PUMPS Q2 Gear Pump Catalogue Q2 TABE OF CONTENTS DESCIPTION......................................................................................................................
More informationDelivery and Payment Conditions of (valid from 01 January 2012) Salzgitter Bauelemente GmbH
Delivery and Payment Conditions of (valid from 01 January 2012) Salzgitter Bauelemente GmbH A. General Provisions I. Contract Formation 1. Any provision by us of goods and services to any party which is
More informationHot Work Permitting Program
Hot Work Permitting Program Environmental Health, Safety, and Risk Management Department Box 6113, SFA Station Nacogdoches, Texas 75962-6113 Original: January 2004 Revised: January 2011, April 2018 Table
More informationLast Time. Bit banged SPI I2C LIN Ethernet. u Embedded networks. Ø Characteristics Ø Requirements Ø Simple embedded LANs
Last Time u Embedded networks Ø Characteristics Ø Requirements Ø Simple embedded LANs Bit banged SPI I2C LIN Ethernet Today u CAN Bus Ø Intro Ø Low-level stuff Ø Frame types Ø Arbitration Ø Filtering Ø
More informationNorth American EDM Supplies Inc.
North American EDM Supplies Inc. 4277 Hamann Parkway * Willoughby, OH 44094 1-440-918-3770 Phone 1-440-918-3838 Fax Dear Customer, Thank you for your interest in establishing an account with our company.
More informationB/54. Ergonomically designed handle. Motor with highperformance. Bajonet-snap buckle for blade cover
Ergonomically designed handle Motor with highperformance gear box Bajonet-snap buckle for blade cover Solid base plate Automatically retracting blade guard Cut indicator Continuously adjustable mitres
More information