304 Diamond point DIATIP. 320 Diamond spring steel wires. 321 Diamond hand lappers. 328 Diamond abrasive sheets. 329 Diamond-coated strips

Transcription

1 1. iamond and CBN tools iamond and CBN tools Overview iamond and CBN grinding points iamond cut-off discs iamant- und CBN grinding point sets 0 iamond point IAIP 09 iamond hollow drill 19 iamond and CBN reamers 0 iamond spring steel wires 1 iamond hand lappers iamond cup grinding wheels iamond dressers 8 iamond abrasive sheets 9 iamond-coated strips iamond and CBN special tools 0 iamond machine files iamond hand files Conical diamond files 80 el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

2 8 iamond and CBN grinding points iamond grinding points CBN grinding points iamond hollow drill 0 iamond and CBN deburring tools iamond/boron nitride reamers iamond spring steel wires iamond hand lappers 08 iamond abrasive discs and sheets iamond cup wheels iamond grinding discs iamond cut-off discs iamond abrasive discs. iamond and CBN tools 1 11 iamond dressers iamond single-stone dressers iamond multiple-stone dressers iamond multi-grit dressers 1 iamond sheets and strips iamond abrasive sheets Flexible diamond files iamond strips 18 iamond files iamond machine files iamond hand files Conical diamond machine files Conical diamond hand files 0

3 1. iamond and CBN tools iamond and CBN tools Interesting facts iamond and CBN tools are available in galvanic, resin, metal or the new vacuum-brazed bonding Galvanic bonding With this type of bonding, the diamond or boron nitride grain is bonded to the carrier by galvanisation. he coating is applied in layers, the thickness of which is dictated by the grit. In special cases, however, several layers may also be applied. In galvanic bonding, the abrasive grits project to a relatively high degree from the bonding. he cutting action of these tools is highly effective and allows high cutting rates. his bonding allows economical and rapid manufacture of special tools. he worn grinding tool can be recoated. Applications ungsten carbide and tungsten carbide green blanks, glass-fibre reinforced (GFR) plastics, carbon fibre-reinforced (CFR) plastics, duroplastics and thermoplastics, electrocarbon, ferrite, graphite, glass and rubber (diamond), but also high-speed steels, hardened steels, high alloy steels (boron nitride). Cutting speed: Approximately 0-0 m/sec. Metal bonding he abrasive coating in this type of bonding consists of a mixture of metal powder and diamond or boron nitride grit. Grinding tools with metal bonding are manufactured by sintering. he high degree of hardness of the metal bonding renders the tool very resistant to wear, but does not achieve the same cutting effectiveness as the other bonding systems. Concentration C100 as standard Applications Ceramic materials, glass, profile grinding of tungsten carbide, ferrite (diamond). Cutting speed: Approximately 10-0 m/sec. Vacuum-brazed bonding With this bonding type, the abrasive grits are directly fused to the carrier. he adhesion of the grits can thus be greatly improved. he grain protrusion results in very high stock removal. Applications hese tools are particularly suited for glass fibre-reinforced and carbon-fibre reinforced plastics (in aircraft construction and shipbuilding), tungsten carbide green blanks (unsintered carbide metal), ceramics (i.e. valve coverings for car engines), carbon products (i.e. brake discs, carbon brushes) and cast materials. Cutting speed: Approximately 0-0 m/sec. Resin bonding In resin bonding, the diamond or boron nitride grit is densely compacted over the entire coating. Synthetic materials with different properties are used as binders. he number of grit particles distributed over the abrasive coating depends on the concentration. his bonding is characterised by a low grinding temperature and high stock removal. It has established itself for tool grinding applications. It allows a high surface quality to be obtained. i s FEPA standard U. S. standard mesh (micron) tight loose tight loose / / / / /0 11 / / /0 01 / coarse Concentration C0 and C as standard 0/ - 0/0 /B /0-00 /B 01 0/ Applications ungsten carbide (diamond), high-speed steel, tool steel (CBN). /B 1 0/0 0-1 /B 0/80 /B 1 0/ /B / Cutting speed: Approximately 10-0 m/sec. /B / /B 1 10/ /B 10 10/ /B 91 10/ /B 00/0 - /B 0/0 - /B 0/ - /B /00-8 fine 8 el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

4 . iamond and CBN tools 1 iamond and CBN tools Interesting facts i Max. speed depending on cutting speed and tool diameter Ø mm m/s m/s m/s m/s m/s /roughness ratio (for grinding discs with resin bonding) he table opposite shows the approximate possible surface roughness values that can be achieved with the various grits. he surface roughness is heavily influenced not only by the grit, but also by the grinding conditions, e.g. machine rigidity R a 0,0 0,1 0, 0, 0,8 1,, iamond and boron nitride abrasives iamond and boron nitride are the hardest abrasives in the world. hey are far harder in comparison to conventional abrasives such as corundum and silicon carbide. iamonds exist in natural and synthetic form though synthetic diamonds are almost exclusively used today. Boron nitride exists only in synthetic form. iamonds consist of carbon and are excellent for grinding short-chipping materials. Owing to the fact that the carbon in diamond is incompatible with the carbon contained in steel, diamonds are unsuitable for steel processing. Boron nitride contains no carbon and is optimally suitable for grinding different types of steel. he high level of hardness of diamond and boron nitride offers a number of advantages, such as a long service life, precise reproduction of shape and exact dimensions during the machining process. Concentration (for grinding discs with resin and metal bonding) he concentration is indicated in carat/cm. his value represents the ratio between the weight of the diamond/boron nitride and the coating volume. hree concentrations are generally proposed: C0, C and C100. he concentration C contains. carat per cm grinding layer. 1 carat = 0. g C , ct ct, ct ct, ct ct, ct, ct, ct el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de 8

5 1. iamond and CBN tools //.1. iamond and CBN grinding points iamond grinding points shank Ø 1. mm iamond grinding points shank Ø. mm iamond grinding points shank Ø mm iamond hollow drill iamond grinding points shank Ø mm CBN grinding points shank Ø mm CBN grinding points shank Ø mm iamond deburring tools iamond spring steel wires iamond hand lappers iamond grinding wheels and discs iamond dressers iamond abrasive sheets and films iamond and CBN grinding points iamond and CBN grinding points are available in four different bonding types. he standard is galvanic bonding, in which a layer of abrasive is applied to the base material. In addition, we offer tools with a metal or resin bonding, in which the diamond grits are completely embedded in the bonding. Finally, vacuum brazed bonding, in which the grit is directly welded to the base material for even better service lives and maximum cutting efficiency: Galvanic bonding Abrasive is applied in a layer of nickel. Metal/resin bonding he diamonds are completely embedded in the bonding. Vacuum-brazed bonding 8 he grit is directly welded to the base material.

6 Precision diamond grinding points hese points are the perfect partner for our high-speed handpiece P 0 and the handpieces of the ENESKA systems - and -1. Areas of use: Casting alloys Precious metal alloys Ceramic Plastics Precision diamond grinding points, galvanic bonding, shank Ø 1. mm Minimum order amount: pieces Shape. iamond and CBN tools //.1. iamond and CBN grinding points Precision diamond grinding points shank Ø 1. mm i Which speed for which tool diameter? Working Ø of the tool mm mm mm.1 -. mm. -. mm mm. - mm. - mm. - mm 8-10 mm Head dimensions Shank Ø x total Max. perm. rpm 0,000 1/min 0,000 1/min 0,000 1/min 00,000 1/min 10,000 1/min 10,000 1/min 10,000 1/min 9,000 1/min 0,000 1/min,000 1/min Price cylinder Ø 1 x mm Ø 1. x 19 mm S Ø 1 x mm Ø 1. x 19 mm S Ø 1. x 8 mm Ø 1. x 1 mm S Ø 1.8 x 8 mm Ø 1. x 1 mm S Recommended rpm 100,000-00,000 1/min 0,000-0,000 1/min,000-10,000 1/min 0,000-10,000 1/min, ,000 1/min 0,000-9,000 1/min,000 -,000 1/min 1,000-0,000 1/min 1,000-0,000 1/min 10,000-0,000 1/min 1 rounded cylinder Ø 1 x mm Ø 1. x 19 mm S Ø 1. x 8 mm Ø 1. x 1 mm S Ø 1. x 8 mm Ø 1. x 1 mm S sphere Ø 0.9 mm Ø 1. x 19 mm S Ø 0.9 mm Ø 1. x 19 mm S Ø 1. mm Ø 1. x 19 mm S Ø 1. mm Ø 1. x 19 mm S Ø 1.8 mm Ø 1. x 19 mm S Ø.1 mm Ø 1. x 19 mm S Ø.1 mm Ø 1. x 19 mm S rounded cone Ø 1. x 10 mm Ø 1. x mm S Ø 1. x 10 mm Ø 1. x mm S Ø 1. x 10 mm Ø 1. x mm S Ø 1. x 10 mm Ø 1. x mm S pointed cone Ø 1. x 8 mm Ø 1. x mm S Ø 1. x 8 mm Ø 1. x mm S Ø 1. x 8 mm Ø 1. x 0 mm S Ø 1. x 8 mm Ø 1. x 0 mm S i Recommendations for the use of these precision grinding points? Always observe recommended rotation speed Avoid excess grinding pressure Bring grinding tools to working speed before use o not use damaged and/or blunt tools Avoid tilting and leverage pear Ø 1 x mm Ø 1. x 19 mm S Ø 1 x mm Ø 1. x 19 mm S Sets Set price Set (1) of diamond grinding points, shank-ø 1. mm S 1 per grit respectively of the points listed above el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de S 8

7 1. iamond and CBN tools //.1. iamond and CBN grinding points iamond grinding points IPROFIL shank Ø. mm Vrecom. = 1-0 m/s (head-ø > 10 mm Vmax. = 0 m/s) max. extension mm IPROFIL diamond grinding points, galvanic bonding, shank Ø. mm d L1 Head dimensions /1 x Neck dimensions d x L1 Angle Radius R Shank Ø x total Original IPROFIL,,0,0 cylinder Ø 1. x mm Ø 1.1 x 9 mm - - Ø. x mm Ø 1. x mm Ø 1. x mm - - Ø. x mm Price from 10 pieces Price from 1 piece Ø 1.9 x mm Ø 1. x mm - - Ø. x mm Ø. x mm Ø. x 1 mm - - Ø. x mm sphere Ø 0.8 mm Ø 0. x mm - - Ø. x mm d L1 Ø 1. mm Ø 1 x mm - - Ø. x mm Ø 1. mm Ø 1 x mm - - Ø. x mm Ø 1.9 mm Ø 1. x mm - - Ø. x mm Ø. mm Ø 1. x mm - - Ø. x mm Ø mm Ø 1.9 x mm - - Ø. x mm Ø.1 mm Ø 1.9 x mm - - Ø. x mm wheel Ø 9 / x 0. mm Ø. x 0 mm Ø 1.9 / 9. x 1. mm Ø. x mm Ø 0 / 1. x 1 mm Ø. x mm rounded wheel Ø 9.8 x. mm Ø. x 1 mm R wheel with front screw Ø 1 / 1 x 0. mm Ø. x mm Ø 18 / 1 x 0. mm Ø. x mm Ø 0 / 18 x 0. mm Ø. x mm Ø / 0 x 0. mm Ø. x mm tree with pointed end Ø 1. x mm Ø. x mm R Ø 1. x. mm - - Ø. x mm Ø. x. mm Ø. x mm Ø. x 10 mm Ø. x mm pointed cone Ø. x. mm Ø. x mm Ø.1 x 9. mm - - Ø. x 8 mm Ø. x mm Ø. x mm rounded cone Ø 1. / 0. x 9 mm - - Ø. x mm Ø 1. / 0.8 x 9 mm - - Ø. x mm Ø 1.9 / 1.1 x 9 mm - - Ø. x mm el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

8 ,,0,0 iamond grinding points, galvanic bonding, shank Ø. mm d L1 rounded cone Ø. /. x 9. mm - Ø, x, mm HP tree with pointed end R Ø. x 9 mm - Ø, x, mm HP 1 Head dimensions /1 x. iamond and CBN tools //.1. iamond and CBN grinding points Precision diamond grinding points shank Ø. mm Vrecom. = 1-0 m/s max. extension = 0. x L Angle Shank Ø x total sphere Ø 1 mm - Ø, x, mm HP Ø 1.8 mm - Ø, x, mm HP Ø.9 mm - Ø, x, mm HP Ø mm Ø, x, mm HP pointed cone Ø. x.9 mm / 0 0 Ø, x, mm HP pieces 1,,0 iamond cut-off discs IPROFIL for shank mounting shank Ø. and mm iamond cut-off discs IPROFIL, galvanic bonding imensions rilling dimension pieces Ø 0 x 0. mm Ø. mm Ø 0 x 0. mm Ø. mm Ø 0 x 0.8 mm Ø. mm Ø 0 x 1 mm Ø. mm Ø x 0. mm Ø. mm Ø x 0.8 mm Ø. mm Ø x 1 mm Ø. mm matching shanks Shank dimensions hardened stainless steel, thread M. Ø. x mm 0 0 Ø x mm 0 0 pieces el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de 8

9 1. iamond and CBN tools //.1. iamond and CBN grinding points iamond grinding point sets shank Ø, mm and shank Ø mm iamond grinding point sets With these sets, you will always have the right diamond grinding point at hand at an unbeatable price. 10 for head Ø up to. mm 1 for head Ø more than. mm,,0 Bestseller! iamond grinding point set (0 pieces), shank Ø. mm Set price he set contains 0 diamond grinding points in spherical, trapezium, pointed cone, rounded cone, tree with pointed end, flame, lens and wheel shapes. 0 0 iamond grinding point set (0 pieces), shank Ø mm Set price he set contains diamond grinding points in cylinder, rounded cylinder, sphere, trapezium, rounded cone, tree with pointed end and pointed cone shapes Original IPROFIL iamond grinding point sets IPROFIL shank Ø mm Vrecom. = 1-0 m/s (head-ø > 10 mm Vmax. = 0 m/s) max. extension mm,0 IPROFIL diamond grinding point sets Set price IPROFIL diamond grinding point set, 10 pieces he set contains diamond grinding points sphere, cylinder, tree with pointed end, cone, pointed cone, rounded cone and trapezium shapes. 88 el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

10 d L1,,0,0 IPROFIL diamond grinding points, galvanic bonding, shank Ø mm Original IPROFIL Head dimensions /1 x. iamond and CBN tools //.1. iamond and CBN grinding points iamond grinding points IPROFIL shank Ø mm Vrecom. = 1-0 m/s (head-ø > 10 mm Vmax. = 0 m/s) max. extension mm Neck dimensions d x L1 Angle Radius R Shank Ø x total cylinder Ø 0.8 x mm Ø 0. x mm - - Ø x mm Ø 1 x mm Ø 0. x 8 mm - - Ø x mm Ø 1. x mm Ø 1. x 10 mm - - Ø x mm Ø x mm Ø 1. x 1 mm - - Ø x mm Ø x mm Ø 1. x 1 mm - - Ø x mm Ø. x mm Ø.1 x 19 mm - - Ø x mm Ø. x mm Ø.1 x 19 mm - - Ø x mm Ø x mm Ø. x 1 mm - - Ø x mm Ø x mm Ø. x 1 mm Ø x mm Ø. x mm Ø x 0 mm Ø x mm Ø x 0 mm Ø x mm Ø x 0 mm Ø x 10 mm Ø x 9 mm pieces 1 sphere Ø 1. mm Ø 1 x mm - - Ø x mm d L1 Ø 1. mm Ø 1 x mm - - Ø x mm Ø.1 mm Ø 1. x mm - - Ø x mm Ø. mm Ø 1. x mm - - Ø x mm Ø mm Ø 1. x mm - - Ø x mm Ø mm Ø 1. x mm - - Ø x mm Ø.1 mm Ø 1.8 x mm - - Ø x mm Ø mm Ø x mm Ø mm Ø x mm lens Ø.1 x 1. mm Ø 1.8 x mm - 0 Ø x 8 mm Ø 9. x 1. mm - - Ø x 1 mm wheel Ø. x 0.8 mm Ø x 0 mm Ø 9 / x 0. mm Ø x 0 mm Ø 1. / 1. x. mm Ø x 8 mm Ø 0 / 1. x 1 mm Ø x 8 mm wheel with front screw Ø / 0 x 0. mm Ø x 8 mm R wheel, rounded Ø.8 x. mm Ø x 1 mm Ø 9.8 x. mm Ø x mm wheel, front coated Ø / x 0. mm Ø x 8 mm

11 1. iamond and CBN tools //.1. iamond and CBN grinding points iamond grinding points IPROFIL shank Ø mm Vrecom. = 1-0 m/s (head-ø > 10 mm Vmax. = 0 m/s) max. extension mm IPROFIL diamond grinding points, galvanic bonding, shank Ø mm Head dimensions /1 x Neck dimensions d x L1 Angle Radius R Original Shank Ø x total IPROFIL,,0,0 pieces tree with pointed end Ø 1. x. mm - - Ø x mm R Ø 1. x 10 mm - - Ø x mm Ø 1. x 10 mm - - Ø x mm Ø. x. mm Ø x mm Ø. x 10 mm Ø x mm Ø. x 10 mm Ø x mm Ø x 10 mm Ø x 9 mm cone Ø 1. / 0.9 x 10 mm - - Ø x mm Ø.1 / 1. x 10 mm - - Ø x mm Ø. / 1. x mm - - Ø x mm pointed cone Ø.1 x mm Ø 1.8 x mm 0 - Ø x mm Ø.1 x mm Ø 1.8 x mm 0 - Ø x mm Ø x 10 mm Ø x 9 mm Ø 8 x 8. mm - - Ø x mm Ø 8 x. mm Ø x mm Ø 8 x.9 mm Ø x mm round cone Ø 1. / 0. x 9 mm - - Ø x mm Ø 1. / 0.8 x 9 mm - - Ø x mm Ø 1.9 / 1.1 x 9 mm - - Ø x mm Ø 1.9 / 1.1 x 9 mm - Ø x mm trapezium Ø. x mm Ø 1. x mm 0 - Ø x mm d L1 trapezium, outline coated Ø 8 x mm Ø x mm barrel Ø x 10 mm Ø x 9 mm R drop Ø x 10 mm Ø x 9 mm R rounded cylinder Ø x 10 mm - - Ø x 9 mm R 90 el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

12 Precision diamond grinding points, galvanic bonding, shank Ø mm d L1 d L1 Head dimensions /1 x. iamond and CBN tools //.1. iamond and CBN grinding points Precision diamond grinding points shank Ø mm Vrecom. = 1-0 m/s max. extension = 0. x L Angle Shank Ø x total pieces cylinder Ø 1. x. mm - Ø x. mm Ø 1.9 x mm - Ø x. mm Ø. x. mm - Ø x. mm Ø. x.8 mm - Ø x. mm sphere Ø 0. mm - Ø x 0 mm Ø 0. mm - Ø x 0 mm Ø 0. mm - Ø x 0 mm Ø 0.8 mm - Ø x 0 mm Ø 0.9 mm - Ø x 0 mm Ø 1 mm - Ø x. mm Ø 1.8 mm - Ø x. mm Ø mm - Ø x. mm Ø.9 mm - Ø x. mm wheel Ø. x 0.8 mm - Ø x. mm Ø. x mm - Ø x. mm Ø. x mm - Ø x. mm wheel with front screw Ø / 1 x 0. mm - Ø x. mm Ø / 8 x 0. mm - Ø x. mm Ø / 8 x 0. mm - Ø x. mm Ø / 8 x 0. mm - Ø x. mm Ø / 1 x 0.1 mm - Ø x. mm cone Ø 1. / 1 x. mm - Ø x. mm pointed cone Ø. x.9 mm 0 Ø x. mm Ø x 10 mm 1 Ø x 0 mm Ø.1 x. mm - Ø x. mm Ø x mm 90 Ø x 0 mm rounded cone Ø. /. x 9. mm - Ø x. mm Ø. x 10 mm - Ø x. mm trapeze Ø 1. / 1. x 1.8 mm 10, Ø x. mm d L1 Ø. / 1.9 x. mm, Ø x. mm Ø. /.1 x. mm 10, Ø x. mm Ø. /. x 9. mm Ø x. mm el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de 91

13 1. iamond and CBN tools //.1. iamond and CBN grinding points Precision diamond grinding points shank Ø mm Vrecom. = 1-0 m/s max. extension = 0. x L Precision diamond grinding points, galvanic bonding, shank Ø mm R Head dimensions /1 x,,0 rounded cylinder Ø x 1 mm - Ø x 0 mm Angle Shank Ø x total pieces trapezium, outline coated Ø. / x.1 mm Ø x. mm Ø 8. / x mm Ø x. mm trapezium, front coated Ø. / x. mm Ø x. mm Ø 9. / x. mm Ø x. mm Ø x 10 mm Ø x 0 mm Ø x 10 mm - Ø x 0 mm tree with pointed end R Ø. x 9 mm - Ø x. mm lens Ø.1 x. mm - Ø x. mm iamond point IAIP shank Ø mm,0 Bestseller! he secret weapon for rib machining. hanks to a long coating and small diameter, you can reach the deepest ribs. Erosion skin is easily torn open, erodible points removed safely. Less time is therefore needed during subsequent stages. iamond point IAIP otal Coating Angle Shank dimensions mm 0 mm 1, Ø mm Price Illustration 00 %! 9 el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

14 iamond grinding points with carbide metal shank Extra long for special grinding tasks in deep bores etc.,0,0 iamond grinding points with carbide metal shank, galvanic bonding, shank Ø mm. iamond and CBN tools //.1. iamond and CBN grinding points Head dimensions x iamond grinding points with carbide metal shank shank Ø mm Shank Ø x total Price cylinder Ø x mm Ø x 8 mm 0 0 Ø x mm Ø x 8 mm Ø x mm Ø x 8 mm Ø x mm Ø x 8 mm Ø x mm Ø x 8 mm Ø x mm Ø x 8 mm Ø 8 x mm Ø x 8 mm 0 0 Ø 8 x mm Ø x 8 mm Ø 8 x mm Ø x 8 mm sphere Ø mm Ø x mm Ø mm Ø x mm Ø mm Ø x mm Ø mm Ø x mm Ø mm Ø x mm Ø mm Ø x mm Ø 8 mm Ø x mm Ø 8 mm Ø x mm Ø 8 mm Ø x mm el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de 9

15 1. iamond and CBN tools //.1. iamond and CBN grinding points iamond grinding points shank Ø mm Vrecom. wet = 1 - m/s Vrecom. dry = 10-0 m/s max. max. extension = 0. x L, shaft tolerance = h, head tolerance = ± 0. mm iamond grinding points, galvanic bonding, shank Ø mm Head dimensions x Neck dimensions d x L1 Shank Ø x total,,0,0 Bestseller! pieces cylinder Ø 0. x mm Ø 0. x mm Ø x mm d L1 Ø 0. x mm Ø 0. x mm Ø x mm Ø 0. x mm Ø 0. x mm Ø x 0 mm Ø 0. x mm Ø 0. x mm Ø x mm Ø 0. x mm Ø 0. x mm Ø x 0 mm Ø 0.8 x mm Ø 0. x mm Ø x mm Ø 0.8 x mm Ø 0. x mm Ø x mm Ø 0.8 x mm Ø 0. x 10 mm Ø x 0 mm Ø 1 x mm Ø 0. x mm Ø x mm Ø 1 x mm Ø 0. x mm Ø x mm Ø 1 x mm Ø 0. x 10 mm Ø x mm Ø 1 x mm Ø 0. x 10 mm Ø x mm Ø 1. x mm Ø 1. x 1 mm Ø x mm Ø 1. x mm Ø 1. x 1 mm Ø x mm Ø x mm Ø 1. x 1 mm Ø x mm Ø x mm Ø 1. x 1 mm Ø x mm Ø x mm Ø 1. x 1 mm Ø x mm Ø. x mm Ø. x 1 mm Ø x mm Ø. x mm Ø. x 1 mm Ø x mm Ø. x mm Ø. x 1 mm Ø x mm Ø x mm Ø. x 1 mm Ø x mm Ø x mm Ø. x 1 mm Ø x mm Ø x mm Ø. x 1 mm Ø x mm Ø. x mm - Ø x mm Ø. x mm - Ø x mm Ø. x mm - Ø x mm Ø x mm - Ø x mm Ø x mm - Ø x mm Ø x mm - Ø x mm el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

16 sphere d Ø 1 mm - Ø x mm Ø 1 mm - Ø x mm L1 Bestseller! iamond grinding points, galvanic bonding, shank Ø mm,,0,0. iamond and CBN tools //.1. iamond and CBN grinding points iamond grinding points shank Ø mm Vrecom. wet = 1 - m/s Vrecom. dry = 10-0 m/s max. max. extension = 0. x L, shaft tolerance = h, head tolerance = ± 0. mm Head dimensions x Neck dimensions d x L1 Shank Ø x total Ø x mm - Ø x mm Ø x mm - Ø x mm Ø x mm - Ø x mm Ø x mm - Ø x mm Ø x mm - Ø x mm Ø x mm - Ø x mm Ø 1 mm - Ø x mm pieces 1 Ø 1. mm - Ø x mm Ø 1. mm - Ø x mm Ø 1. mm - Ø x mm Ø mm - Ø x mm Ø mm - Ø x mm Ø mm - Ø x mm Ø. mm - Ø x mm Ø. mm - Ø x mm Ø. mm - Ø x mm Ø mm - Ø x mm Ø mm - Ø x mm Ø mm - Ø x mm Ø mm - Ø x mm Ø mm - Ø x mm Ø mm - Ø x mm Ø mm - Ø x 0 mm Ø mm - Ø x 0 mm Ø mm - Ø x 0 mm Ø mm - Ø x 0 mm Ø mm - Ø x 0 mm Ø mm - Ø x 0 mm el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de 9

17 1. iamond and CBN tools //.1. iamond and CBN grinding points iamond grinding points solid tungsten carbide shank Ø mm iamond grinding points, solid carbide metal he diamond grinding points made from solid carbide metal convince through their high rigidity and the resulting precise true running. hey are available in ascending increments of 1/10 mm with a head diameter from 0. to mm. iamond grinding points, solid carbide metal, galvanic bonding, shank Ø mm d d L1 L1 Head dimensions x Neck dimensions d x L1 Shank Ø x total i,0 Suitable for every dimension! hese grinding points are available in increments of 1/10 mm between 0. and mm diameter. You can be sure to find the right one for your application! cylinder Ø 0. x mm Ø 0. x mm Ø x 0 mm Ø 0. x mm Ø 0. x mm Ø x 0 mm Ø 0. x mm Ø 0. x mm Ø x 0 mm Ø 0. x mm Ø x 0 mm Ø 0. x mm Ø 0. x mm Ø x 0 mm Ø 0. x mm Ø x 0 mm Ø 0.8 x mm Ø 0. x mm Ø x 0 mm Ø 0. x mm Ø x 0 mm Ø 0.9 x mm Ø 0.8 x 10 mm Ø x 0 mm Ø 0. x 10 mm Ø x 0 mm Ø 1 x mm Ø 0.8 x 10 mm Ø x 0 mm Ø 0. x 10 mm Ø x 0 mm Ø 0. x mm Ø x 0 mm Ø 1. x mm Ø 1. x 1 mm Ø x 0 mm Ø 1. x 1 mm Ø x 0 mm Ø 1. x 1 mm Ø x 0 mm Ø x mm Ø 1.8 x 1 mm Ø x 0 mm Ø 1. x 1 mm Ø x 0 mm Ø 1. x 1 mm Ø x 0 mm Ø. x mm Ø. x 1 mm Ø x 0 mm Ø. x 1 mm Ø x 0 mm Ø. x 1 mm Ø x 0 mm Ø x mm Ø.8 x 1 mm Ø x 0 mm Ø. x 1 mm Ø x 0 mm Ø. x 1 mm Ø x 0 mm pieces 9 el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

18 ,0 iamond hollow drill, electroplated Head dimensions Interior Ø Shank dimensions. iamond and CBN tools //.1. iamond and CBN grinding points rilling depth Flush drilling iamond hollow drill shank Ø mm Ø 1. x mm 0. mm Ø x 8 mm Ø x mm 0.8 mm Ø x 8 mm Ø 1 x mm Ø x 10 mm 1. mm Ø x mm Ø 1. x mm Ø x 10 mm. mm Ø x mm Ø x mm Ø x 10 mm. mm Ø x 8 mm Ø x mm Ø x 10 mm. mm Ø x mm Ø x mm Ø 8 x 10 mm.1 mm Ø x mm Ø x mm Ø 10 x 1 mm 8 mm Ø x 0 10 mm Ø x mm Ø 11 x 1 mm 9 mm Ø x 0 10 mm Ø x mm pieces 1 Examples of use: Plate drilling Useful accessories for your workplace: Fine dust mask FFP Professional protection against solid and liquid particles, fine dusts and even smog Incl. expiration valve Protective goggles Clear, optically correct, scratchproof PC glasses Comfort cushions on the sidepiece ends Soft nose pad Cleaning fluid X 01-A Ideal for cleaning moulds and workpieces Evaporates rapidly and without leaving residues For all metals, glass, ceramics and almost all plastics Price Price Price el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de 9

19 1. iamond and CBN tools //.1. iamond and CBN grinding points iamond grinding points shank Ø mm Vrecom. = 1-0 m/s (head-ø > 10 mm Vmax. = 0 m/s) max. extension 0. L, shank tolerance = h, head tolerance = ± 0. mm iamond grinding points, galvanic bonding, shank Ø mm Head dimensions x Neck dimensions d x L1 Angle Radius R Shank Ø x total,,0,0 Bestseller! pieces cylinder Ø x mm Ø. x 0 mm - - Ø x 0 mm d L1 Ø x mm Ø. x 0 mm - - Ø x 0 mm Ø x mm Ø. x 0 mm - - Ø x 0 mm Ø x mm Ø. x 0 mm - - Ø x 0 mm Ø x mm Ø. x 0 mm - - Ø x 0 mm Ø x 8 mm Ø. x 0 mm - - Ø x 0 mm Ø x 8 mm Ø. x 0 mm - - Ø x 0 mm Ø x 8 mm Ø. x 0 mm - - Ø x 0 mm Ø x 0 mm Ø x 0 mm Ø x 0 mm Ø x 0 mm Ø x 0 mm Ø x 0 mm Ø 8 x mm Ø x 0 mm Ø 8 x mm Ø x 0 mm Ø 8 x mm Ø x 0 mm Ø 10 x mm Ø x 0 mm Ø 10 x mm Ø x 0 mm Ø 10 x mm Ø x 0 mm Ø 10 x 10 mm Ø x 0 mm Ø 10 x 10 mm Ø x 0 mm Ø 10 x 10 mm Ø x 0 mm Ø 1 x mm Ø x 0 mm Ø 1 x mm Ø x 0 mm Ø 1 x 0 mm Ø x 0 mm Ø 1 x 0 mm Ø x 0 mm Ø 1 x 0 mm Ø x 0 mm Ø 1 x mm Ø x 0 mm Ø 1 x mm Ø x 0 mm Ø 1 x 10 mm Ø x 0 mm Ø 1 x 10 mm Ø x 0 mm Ø 1 x 0 mm Ø x 0 mm Ø 1 x 0 mm Ø x 0 mm el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

20 Bestseller! iamond grinding points, galvanic bonding, shank Ø mm,,0,0. iamond and CBN tools //.1. iamond and CBN grinding points iamond grinding points shank Ø mm Vrecom. = 1-0 m/s (head-ø > 10 mm Vmax. = 0 m/s) max. extension 0. L, shank tolerance = h, head tolerance = ± 0. mm Head dimensions x Neck dimensions d x L1 Angle Radius R Shank Ø x total sphere Ø 8 mm Ø x 0 mm Ø 8 mm Ø x 0 mm Ø 8 mm Ø x 0 mm Ø 10 mm Ø x 0 mm Ø 10 mm Ø x 0 mm Ø 10 mm Ø x 0 mm Ø 1 mm Ø x 0 mm Ø 1 mm Ø x 0 mm Ø 1 mm Ø x 0 mm pieces 1 Ø 0 mm Ø x 0 mm Ø 0 mm Ø x 0 mm Ø 0 mm Ø x 0 mm pointed cone Ø x mm - - Ø x 100 mm Ø x mm Ø x 100 mm Ø x mm Ø x 100 mm Ø x 18 mm Ø x 8 mm Ø x 1 mm Ø x mm Ø 10 x 1 mm - - Ø x mm Ø 10 x 1 mm - - Ø x mm Ø 10 x 9 mm Ø x 0 mm Ø 10 x 9 mm Ø x 0 mm Ø 10 x 9 mm Ø x 0 mm Ø 1 x 1 mm Ø x mm Ø 1 x 1 mm Ø x mm Ø 1 x 1 mm Ø x mm continued on page 00! Ø 0 x 18 mm Ø x 8 mm Ø 0 x 18 mm Ø x 8 mm Ø 0 x 18 mm Ø x 8 mm el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de 99

21 1. iamond and CBN tools //.1. iamond and CBN grinding points iamond grinding points shank Ø mm Vrecom. = 1-0 m/s (head-ø > 10 mm Vmax. = 0 m/s) max. extension 0. L, shank tolerance = h, head tolerance = ± 0. mm iamond grinding points, galvanic bonding, shank Ø mm Head dimensions x Neck dimensions d x L1 Angle Radius R Shank Ø x total,,0,0 pieces pointed cone (cont.) Ø 10 x mm Ø x mm Ø 10 x mm Ø x mm Ø 10 x mm Ø x mm Ø 0 x 10 mm Ø x 0 mm Ø 0 x 10 mm Ø x 0 mm Ø 0 x 10 mm Ø x 0 mm Ø 0 x 1 mm Ø x mm Ø 0 x 1 mm Ø x mm Ø 0 x 1 mm Ø x mm rounded cylinder Ø x 0 mm Ø x 0 mm Ø x 0 mm Ø x 0 mm R Ø 10 x 1 mm Ø x mm Ø 10 x 1 mm Ø x mm Useful accessories for your workplace: Allround glove Maxi-Hit Abrasion-resistant, pleasant, flexible, breathable and liquid-repellant Highly stretchable and quick drying Earplugs Super-Fit incl. box Very comfortable to wear Noise attenuation by 0 decibels (db) Incl. practical storage box, belt clip and safety cord Protective goggles Clear, optically correct, scratchproof PC glasses Comfort cushions on the sidepiece ends Soft nose pad Price Price Price el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

22 d L1,0,0 CBN grinding points, galvanic bonding, shank Ø mm Head dimensions x. iamond and CBN tools //.1. iamond and CBN grinding points Neck dimensions d x L1 CBN grinding points shank Ø mm Vrecom. wet = 0 m/s Vrecom. dry = 0 m/s max. max. extension = 0. x L Shank Ø x total pieces cylinder Ø 0. x mm Ø 0. x mm Ø x mm B 0 0 Ø 0. x mm Ø 0. x mm Ø x mm B 0 0 Ø 0. x mm Ø 0. x mm Ø x mm B 0 0 Ø 0.8 x mm Ø 0. x mm Ø x mm B Ø 0.8 x mm Ø 0. x mm Ø x mm B Ø 1 x mm Ø 0.8 x mm Ø x mm B Ø 1 x mm Ø 0. x mm Ø x mm B Ø 1 x mm Ø 0. x 10 mm Ø x mm B Ø 1. x mm Ø 1. x 1 mm Ø x mm B Ø 1. x mm Ø 1.1 x 1 mm Ø x mm B Ø x mm Ø 1. x 1 mm Ø x mm B Ø x mm Ø 1. x 1 mm Ø x mm B Ø x mm Ø 1. x 1 mm Ø x mm B Ø. x mm Ø. x 1 mm Ø x mm B 91 0 Ø. x mm Ø.1 x 1 mm Ø x mm B 1 0 Ø. x mm Ø x 1 mm Ø x mm B Ø x mm Ø. x 1 mm Ø x mm B Ø x mm Ø. x 1 mm Ø x mm B Ø x mm Ø. x 1 mm Ø x mm B Ø. x mm - Ø x mm B 91 0 Ø. x mm - Ø x mm B 1 0 Ø. x mm - Ø x mm B Ø x mm - Ø x mm B Ø x mm - Ø x mm B Ø x mm - Ø x mm B Ø x mm - Ø x mm B Ø x mm - Ø x mm B Ø x mm - Ø x mm B Ø x mm - Ø x mm B 91 0 Ø x mm - Ø x mm B 1 0 Ø x mm - Ø x mm B el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de 01

23 1. iamond and CBN tools //.1. iamond and CBN grinding points CBN grinding points, solid carbide metal shank Ø mm CBN grinding points, solid carbide metal he new boron nitride grinding points made from solid carbide metal convince through their high rigidity and the resulting precise true running. hey are available in ascending increments of 1/10 mm with a head diameter from 0. to mm. CBN grinding points, solid carbide metal, galvanic bonding, shank Ø mm d L1 Head dimensions x Neck dimensions d Shank Ø x total i,0 cylinder Ø 0. x mm Ø 0. x mm Ø x 0 mm B 0 01 Ø 0. x mm Ø 0. x mm Ø x 0 mm B 0 0 Ø 0. x mm Ø 0. x mm Ø x 0 mm B 0 0 Ø 0. x mm Ø x 0 mm B Ø 0. x mm Ø 0. x mm Ø x 0 mm B 0 0 Ø 0. x mm Ø x 0 mm B Ø 0.8 x mm Ø 0. x mm Ø x 0 mm B 0 0 Ø 0. x mm Ø x 0 mm B Ø 0.9 x mm Ø 0.8 x 10 mm Ø x 0 mm B 0 09 Ø 0. x 10 mm Ø x 0 mm B Ø 1 x mm Ø 0.8 x 10 mm Ø x 0 mm B 0 01 Ø 0. x 10 mm Ø x 0 mm B Ø 1. x mm Ø 1. x 1 mm Ø x 0 mm B 0 0 Ø 1. x 1 mm Ø x 0 mm B Ø x mm Ø 1.8 x 1 mm Ø x 0 mm B Ø 1. x 1 mm Ø x 0 mm B Ø. x mm Ø. x 1 mm Ø x 0 mm B 0 10 Ø. x 1 mm Ø x 0 mm B Ø x mm Ø.8 x 1 mm Ø x 0 mm B 0 11 Ø. x 1 mm Ø x 0 mm B Suitable for every measurement! hese grinding points are available in increments of 1/10 mm between 0. and mm diameter. You can be sure to find the right one for your application! pieces CBN grinding point set shank Ø mm Bestseller! CBN grinding point set (0 pieces), shank Ø mm Set price he set contains CBN grinding points in cylinder, rounded cylinder, sphere, trapezium, rounded cone, tree with pointed end and pointed cone shapes el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

24 d L1,0,0 CBN grinding points, galvanic bonding, shank Ø mm Head dimensions x Neck dimensions d x L1. iamond and CBN tools //.1. iamond and CBN grinding points CBN grinding points shank Ø mm Vrecom. wet = 0 m/s Vrecom. dry = 0 m/s max. max. extension = 0. x L Shank Ø x total mm pieces cylinder Ø x mm Ø. x 0 mm Ø x 0 mm B Ø x mm Ø. x 0 mm Ø x 0 mm B Ø x mm Ø. x 0 mm Ø x 0 mm B 1 0 Ø x 0 mm - Ø x 0 mm B Ø 8 x mm - Ø x 0 mm B Ø 10 x mm - Ø x 0 mm B 91 0 Ø 10 x mm - Ø x 0 mm B Ø 10 x 10 mm - Ø x 0 mm B Ø 10 x 10 mm - Ø x 0 mm B Ø 1 x mm - Ø x 0 mm B Ø 1 x mm - Ø x 0 mm B Ø 1 x 10 mm - Ø x 0 mm B Ø 1 x 10 mm - Ø x 0 mm B Ø 1 x 10 mm - Ø x 0 mm B Ø 1 x 10 mm - Ø x 0 mm B Useful accessories for your workplace: Cleaning fluid X 01-A Ideal for cleaning moulds and workpieces Evaporates rapidly and without leaving residues For all metals, glass, ceramics and almost all plastics Ear plugs with headband Plastic headband provides a secure hold in case of jerky or rapid movements Pleasantly comfortable to wear Noise attenuation by decibels (db) Gloves Ultra Lite PU Hyflex Lint-free and breathable Exact fit and adjustability Multiple use Price Price Price el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de 0

25 1. iamond and CBN tools //.1. iamond and CBN grinding points iamond grinding points, vacuum brazed shank Ø mm iamond grinding points vacuum-brazed bonding he vacuum-brazed bonding provides a much better adhesion of grits to the carrier thanks to direct fusing. hese tools are particularly suited for fibre glass reinforced materials GFR and CFR plastics (in aircraft construction and shipbuilding), tungsten carbide green components (unsintered carbide), ceramics (i.e. valve cover rings for car engines), coal products (i.e. brake discs, carbon brushes), cast materials. Benefits of this new bonding: Very good stock removal thanks to higher grit protrusion Allows production of more complex forms, e.g. inner radiuses Markedly better grit retention force Cooler grinding thanks to larger chipping spaces iamond grinding points vacuum brazed bonding, shank Ø mm Head dimensions /1 x Angle Radius R Shank Ø x total cylinder Ø x mm - - Ø x mm 0 0 Price round cylinder Ø x mm -.0 Ø x mm 0 08 Ø x 10 mm -.0 Ø x mm 0 09 sphere Ø mm - - Ø x mm 0 00 Ø mm - - Ø x mm 0 01 pointed cone Ø x mm 0 - Ø x mm 0 0 Ø x 10 mm 0 - Ø x mm 0 0 rounded cone Ø / 1 x 10 mm 1 0. Ø x mm 0 0 Ø / x 10 mm 0 1. Ø x mm 0 0 Ø / x mm 1. Ø x mm 0 0 Special tools available on request. Set Price iamond grinding points, vacuum brazed, 10 pieces el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

26 . iamond and CBN tools //.. iamond/cbn deburring tools iamond honing tools for through bores and blind bores iamond honing tools are the ideal implements for very fine processing of bores in toolmaking and mould building, machine and gauge construction, e.g. final processing, hardened bores or reworking of ejector bores. Versatile in use (lathe, drilling machine, CNC machining centre, milling machine, etc.)... they improve surface quality... they increase accuracy of diameter... they enhance geometric roundness. hrough bore Blind bore 1 iamond honing tools for blind bores Each of these awls has diamond inserts. he body has slots. hese awls are suitable for processing carbide metal, hardened steel and nonferrous metals, etc. and likewise for use on drilling machines and lathes. Important: only work with petroleum and honing oil! i Practical tip Only push the workpiece on to the relaxed awl without any resistance Subsequently expand the honing tool until slight friction is felt. Burr in the bore will damage the honing tool! iamond honing tools for blind bores, metallic bond Original Nominal dimensions Shank dimensions d otal L Expansion iamond inserts Coating dimensions (W x H) mm Ø. mm 0 mm 0. mm x 1 mm mm Ø. mm 0 mm 0. mm x 1 mm mm Ø. mm 0 mm 0. mm x 1 mm mm Ø mm 0 mm 0. mm x 1 mm mm Ø. mm 8 mm 0. mm x 1 mm mm Ø mm 8 mm 0. mm x 1 mm mm Ø. mm 8 mm 0. mm 11 x 1. mm mm Ø mm 100 mm 0. mm 11 x 1. mm mm Ø. mm 100 mm 0. mm 11 x 1. mm mm Ø mm 100 mm 0. mm 11 x 1. mm mm Ø. mm 100 mm 0. mm 11 x 1. mm mm Ø 8 mm 10 mm 0. mm 1 x mm mm Ø 8. mm 10 mm 0. mm 1 x mm mm Ø 9 mm 10 mm 0. mm 1 x mm mm Ø 9. mm 10 mm 0. mm 1 x mm mm Ø 10 mm 10 mm 0. mm 1 x mm mm Ø 10. mm 10 mm 0. mm 1 x mm mm Ø 11 mm 10 mm 0. mm 1 x mm mm Ø 11. mm 10 mm 0. mm 1 x mm Recommended cutting speed: Vc = 1-0 m/min Approximate stroke speed: Va = 10 m/min Price el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de 0

27 1. iamond and CBN tools //.. iamond/cbn deburring tools iamond honing tools for through bores iamond honing tools for through bores he cone of the expansion element is hard chrome-plated and fits in the awl body over the entire. hese awls are suitable for processing carbide metal, hardened steel and non-ferrous metals, etc. and can be used on drilling machines and lathes. Important: only work with petroleum or honing oil! iamond honing tools for through bores, metallic bond Original Nominal dimensions Neck dimensions d x L1 otal L Expansion iamond inserts i Coating dimensions (W x H) iamond honing tools with double coating available at short notice on request! Consult Stefan Spiegel: el. +9 (0) 0 / s.spiegel@joke.de mm 1.8 x 1 mm mm 0. mm 10 x 0.8 mm mm x 1 mm mm 0. mm 10 x 1 mm 8 0 mm. x 1 mm mm 0. mm 10 x 1 mm 8 0. mm. x 1 mm mm 0. mm 10 x 1 mm 8 0 mm. x 18 mm 80 mm 0. mm 1 x 1. mm 8 0. mm x 18 mm 80 mm 0. mm 1 x 1. mm 8 0 mm. x mm 100 mm 0. mm 1 x mm 8 0. mm x mm 100 mm 0. mm 1 x mm mm. x mm 10 mm 0. mm 1 x mm mm x mm 10 mm 0. mm 1 x mm mm. x mm 10 mm 0. mm 1 x mm mm x 0 mm 10 mm 0. mm 0 x mm mm. x 0 mm 10 mm 0. mm 0 x mm mm 8 x 0 mm 10 mm 0. mm 0 x mm mm 8. x 0 mm 10 mm 0. mm 0 x mm mm 9 x 0 mm 10 mm 0. mm 0 x mm mm 9. x mm 10 mm 0. mm x mm mm 9. x mm 10 mm 0. mm x mm mm 10. x mm 10 mm 0. mm x mm mm 11 x mm 10 mm 0. mm x mm mm 11 x mm 10 mm 0. mm x mm mm 1 x mm 10 mm 0. mm x mm mm 1. x mm 10 mm 1 mm x mm mm 1 x mm 10 mm 1 mm x mm mm 1. x mm 10 mm 1 mm x mm mm 1 x mm 10 mm 1 mm x mm mm 1. x mm 00 mm 1 mm x mm mm 1 x mm 00 mm 1 mm x mm mm 1. x mm 00 mm 1 mm x mm mm 1. x mm 00 mm 1 mm x mm mm 1. x mm 00 mm 1 mm x mm mm 18. x mm 00 mm 1 mm x mm mm 19. x mm 00 mm 1 mm x mm 8 0 Price 0 el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

28 iamond/cbn reamers hese tools appeal by their robust and userfriendly design and extraordinary durability. As the advancement of conventional lapping arbors, these reamers can be used without compound so that no time-consuming cleaning is necessary. esign features fixed shank, cylindrical clamping, slotted front and continuous adjustability by means of a locking screw. Main applications Finishing-machining of hardened press bores for tool and mould making Reworking on hard ejector bores and sleeves for the plastics industry Fine machining and finishing for largescale production on transfer lines and machining centres. iamond and CBN tools //.. iamond/cbn deburring tools iamond/cbn reamers with adjustable recess i iamond or CBN? It all depends on the hardness of the material: iamond for tungsten carbide, ceramics and steel up to HRC Boron nitride for hardened steel up to 8 HRC 1 iamond/cbn reamers esign Nominal x coating Ø Shank dimensions otal diamond Ø x 10 mm Ø x mm 80 mm Ø x 0 mm Ø x mm 80 mm Ø x 0 mm Ø x mm 80 mm Ø x 0 mm Ø x mm 100 mm Ø x 0 mm Ø x mm 100 mm Ø 8 x 0 mm Ø 8 x mm 10 mm Ø 10 x 0 mm Ø 10 x mm 10 mm Ø 1 x 0 mm Ø 1 x mm 10 mm Price CBN Ø x 10 mm Ø x mm 80 mm B 0 0 Ø x 0 mm Ø x mm 80 mm B Ø x 0 mm Ø x mm 80 mm B 1 0 Ø x 0 mm Ø x mm 100 mm B 1 0 Ø x 0 mm Ø x mm 100 mm B 1 0 Ød Ø 8 x 0 mm Ø 8 x mm 10 mm B 1 0 Ø 10 x 0 mm Ø 10 x mm 10 mm B 1 0 Ø 1 x 0 mm Ø 1 x mm 10 mm B 1 0 Recommended cutting speed: V = 1 1 m/min. maximum processing range: nominal dimensions Ø + 0. mm mm Special dimensions available on request! optimum processing range: nominal dimensions Ø ± 0.0 mm el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de 0

29 1. iamond and CBN tools //.. iamond/cbn deburring tools iamond spring steel wires iamond spring steel wires Flexible application for example for dividing outline parts, reworking of bores or slots in hard materials. iamond spring steel wires, galvanic bonding imensions Coating otal pieces Ø 0. mm 0 mm 10 mm Ø 0. mm 0 mm 10 mm Ø 0. mm 0 mm 10 mm Ø 0. mm 0 mm 10 mm Ø 0.8 mm 0 mm 10 mm Ø 0.9 mm 0 mm 10 mm Ø 1 mm 0 mm 10 mm Ø 1.1 mm 0 mm 10 mm Ø 1. mm 0 mm 10 mm Ø 1. mm 0 mm 10 mm Ø 1. mm 0 mm 10 mm Ø 1. mm 0 mm 10 mm Ø mm 0 mm 10 mm i Wire as desired Coating centred as standard! All wires are 0. mm and are available in grit s 0,,, 91, 10 and 1 at short notice. If desired, wires can also be delivered in 00, 0 and 0 mm. Custom-made coating, wire with or without tip. Consult Stefan Spiegel: el. +9 (0) 0 / s.spiegel@joke.de 08 el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

30 iamond hand lappers Hand lappers are suitable for sharpening, eliminating built-up edges, removal of microcracks, chamfering and breaking of tool cuts. Preferably for carbide metal tools and also suitable for processing of hardened or ground tools. With aluminium handles. he hand lappers are available in two types of bond: synthetic bond for fine reworking, e.g. on turning tools, knife heads and cutters. the metal bond is highly wear-resistant and suitable for robust applications, for example on turnover boards, turntables, cutters, etc.. iamond and CBN tools //.. iamond/cbn deburring tools iamond hand lappers Synthetic and metal bond 1 iamond hand lappers with aluminium handles Bonding imensions Coating dimensions pieces synthetic 10 x 10 mm 10 x x 0 mm / # synthetic 10 x 10 mm 10 x x 0 mm 0 / # synthetic 10 x 10 mm 10 x x 0 mm 1 / # metal 10 x 10 mm 10 x 1 x 0 mm 0 11 metal 10 x 10 mm 10 x 1 x 0 mm 0 1 metal 10 x 10 mm 10 x 1 x 0 mm el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de 09

31 1. iamond and CBN tools //.. iamond abrasive discs and sheets iamond cup grinding wheels resin bonding iamond grinding wheels, resin bonding E W X imensions ia. x Coating W x X rilling dimension H Bottom dimension E H i Concentration 1 A- Ø 100 x mm x mm Ø 0 mm 10 C Ø 100 x mm x mm Ø 0 mm 10 C Ø 100 x mm x mm Ø 0 mm 10 C Ø 100 x mm x mm Ø 0 mm 10 C Ø 100 x mm 10 x mm Ø 0 mm 10 C Ø 100 x mm 10 x mm Ø 0 mm 10 C Ø 100 x mm 10 x mm Ø 0 mm 10 C Ø 100 x mm 10 x mm Ø 0 mm 10 C Price Other grinding wheels on request! We can also offer you grinding wheels with boron nitride coating or other shapes, dimensions and grit s. Please discuss your requirements with Stefan Spiegel: el. +9 (0) 0 / s.spiegel@joke.de iamond cup grinding wheels galvanic bonding iamond grinding wheels, galvanic bonding imensions ia. x Coating W / W1 rilling dimension H 1 A- Ø 100 x mm x mm Ø 0 mm Ø 100 x mm x mm Ø 0 mm Ø 100 x mm x mm Ø 0 mm Price Ø 100 x mm 10 x mm Ø 0 mm Ø 100 x mm 10 x mm Ø 0 mm Ø 100 x mm 10 x mm Ø 0 mm Cleaning stone Price In order to keep the cutting surface of the abrasive discs clean and sharp, they should be regularly dressed with a cleaning stone. Available for resin and metal bonded abrasive discs el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

32 Plastic/diamond cut-off discs joke ia-isc hin, highly flexible plastic discs filled with natural diamonds. he discs can be used on both sides for polishing zirconium, glass, titanium, stone and all steels. Ideal for narrow slots. Can be used with fluid or diamond paste. Max. speed:,000 rpm matching mandrels imensions. iamond and CBN tools //.. iamond abrasive discs and sheets Plastic/diamond cut-off discs joke ia isc rilling dimensions Colour pieces Ø x 0. mm Ø 1.8 mm 0 µm green Ø x 0. mm Ø 1.8 mm 9 µm blue Shank dimensions rilling dimensions Max. disc Ø. x 0/8 mm Ø mm Ø. x. mm 0 Ø x 0 mm Ø mm Ø. x. mm 0 Ø x 0/0 mm Ø mm Ø 8 x mm pieces 1 Cut-off disc receptacles with carbide metal shank Cut-off disc receptacles with carbide metal shank ype for drilling dim. A Head dimensions C Shank dimensions B x L A mm Ø 9 mm Ø x mm A mm Ø 9 mm Ø x mm Price, B A mm Ø 9 mm Ø x mm C A A mm Ø 9 mm Ø x mm SW L L1 A mm Ø 1 mm Ø x mm A mm Ø 1 mm Ø x mm A8 8 mm Ø 1 mm Ø x mm A8 8 mm Ø 1 mm Ø x mm A8-G 8 mm Ø mm Ø x mm B C C A A10 10 mm Ø mm Ø x mm L L1 A1 1 mm Ø mm Ø x mm el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de 11

33 1. iamond and CBN tools //.. iamond abrasive discs and sheets iamond cut-off discs with closed rim iamond cut-off discs, galvanic bonding imensions ia. x rilling dimension H Blade thickness E Matching receptacles pieces Ø 1 x 0. mm Ø mm 0.1 mm A 0 1 Ø 1 x 0. mm Ø mm 0. mm A 0 1 Ø 1 x 0. mm Ø mm 0. mm 10 A 0 1 Ø 1 x 0. mm Ø mm 0. mm 10 A 0 1 Ø 1 x 0. mm Ø mm 0. mm 10 A 0 1 Ø 0 x 0.8 mm Ø mm 0. mm 1 A Ø 0 x 0.9 mm Ø mm 0. mm 181 A 0 1 Ø 0 x 1. mm Ø mm 1 mm 1 A 0 1 Ø 0 x 1. mm Ø mm 1 mm 181 A 0 1 Ø 0 x 0. mm Ø mm 0. mm 1 A E Ø 0 x 0.8 mm Ø mm 0. mm 181 A Ø 0 x 0.9 mm Ø mm 0. mm 1 A 0 1 H Ø 0 x 1 mm Ø mm 0. mm 181 A 0 1 Ø 0 x 1. mm Ø mm 1 mm 1 A 0 1 Ø 0 x 1. mm Ø mm 1 mm 181 A 0 1 Ø 0 x 0.8 mm Ø 10 mm 0. mm 1 A Ø 0 x 1. mm Ø 10 mm 1 mm 1 A Ø 0 x 0.8 mm Ø 1 mm 0. mm 1 A Ø 0 x 1. mm Ø 1 mm 1 mm 1 A1 0 1 Ø x 0.9 mm Ø 8 mm 0. mm 1 A8-G Ø x 1 mm Ø 8 mm 0. mm 181 A8-G Ø 100 x 0.9 mm Ø mm 0. mm Ø 100 x 1 mm Ø mm 0. mm Ø 100 x 1. mm Ø mm 1 mm Ø 100 x 1. mm Ø mm 1 mm Ø 1 x 1. mm Ø mm 1 mm Ø 1 x 1. mm Ø mm 1 mm Ø 10 x 1. mm Ø mm 1 mm i Other dimensions and grit s on request! Please consult Stefan Spiegel: el. +9 (0) 0 / s.spiegel@joke.de 1 el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

34 iamond single-stone dressers he single diamonds have at least three working points (quality 0). hey have a block-shaped, firmly textured crystal shape with inclusions. he following aspects should be noted when dressing: ressing sideways forward feed mm/revolution Adequate continuous cooling Always protect the diamond against blows and impacts Max. feed motion 0.0 mm Place something under the centre of the disc at an angle of inclination of - 1 i Wheel width in mm Scheibenbreite in mm ,0 ct 0, ct 0, ct 0, ct. iamond and CBN tools //.. iamond dressers iamond single-stone dressers Choice of single-stone dresser in relation to the grinding wheel Scheibendurchmesser Wheel diameter in mm in mm 1 iamond single-stone dressers otal iamond weight; carat MK 0 1. mm 0. ct mm 0. ct mm 0. ct mm 1 ct pieces MK 1 9 mm 0. ct mm 0. ct mm 1 ct 0 08 Ø 8 x 0 mm 0 mm 0. ct mm 0. ct 0 10 Ø 8 x 80 mm 80 mm 0. ct mm 0. ct mm 1 ct 0 19 Ø 10 x 0 mm 0 mm 0. ct mm 0. ct mm 0. ct 0 1 el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de 1

35 1. iamond and CBN tools //.. iamond dressers iamond multiple-stone dressers iamond multiple-stone dressers Multi stone dressers are normally used for large, very wide grinding wheels. Since a large diamond surface is used in the multiple-stone dresser, the load is optimally distributed. iamond multiple-stone dressers otal iamond distribution i Choice of a multiple-stone dresser in relation to the grinding wheel. Scheibenbreite Wheel width in in mm mm iamond weight; carat stones Steine 1,0 ct stones Steine 1,0 ct Scheibendurchmesser Wheel diameter mm in mm MK 0 1. mm 1 layer - stones 1 ct 0 0 pieces 1. mm 1 layer - stones 1 ct 0 MK 1 1 mm 1 layer - stones 1 ct mm 1 layer - stones 1 ct 0 Ø 8 x 90 mm 90 mm 1 layer - stones 1 ct 0 90 mm 1 layer - stones 1 ct 0 1 el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

36 iamond multi-grit dressers Multi-grit dressers can be used until completely worn out. he diamond disc is interspersed throughout with diamond grit. ue to the low planing forces, these dressers are predominately used for narrow, sharp-edged and pointed wheels. iamond multi-grit dressers otal. iamond and CBN tools //.. iamond dressers iamond multi-grit dressers of grinding wheel to be dressed i Scheibenbreite Wheel width in in mm mm iamond weight; carat Choice of multi-grit dressers in relation to the grinding wheel ct 1, ct, ct 1, ct Wheel diameter Scheibendurchmesser in mm in mm MK 0 0 mm ct mm ct Price from pieces Price from 1 piece 1 MK 1 0 mm ct mm -10. ct Ø 8 x 100 mm 100 mm ct mm ct 81 0 Ø 1 x 10 mm 10 mm ct mm -10. ct iamond dresser, galvanic Price For dressing and shaping grinding points, dimensions: x x 1, total 11 mm iamond multiple-grit manual dresser pieces otal 10 mm, for dressing grinding points and grinding wheels, usable diamond area Ø x mm el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de 1

37 1. iamond and CBN tools //.. iamond sheets and strips iamond abrasive sheets joke ia-speed iamond abrasive sheets joke ia-speed, self-adhesive hickness mm. Highly flexible, diamond-coated abrasive sheets. Only to be used wet in order to avoid overheating and separation of the diamond layer. Furthermore, coolants improve the chip clearance and consequently result in better surface finishing with less wear. hanks to the high abrasive power of the diamonds, ia-speed abrasive sheets can also be used with low contact pressure. Applications: carbide metal, ceramic, glass, hardened steels, stone. imensions Bonding Colour Price x mm metal 1 black metal red metal yellow metal 0 white resin 1 yellow resin blue resin orange Flexible diamond files Flexible diamond files imensions Coating otal sitze Price Flexible diamond files with galvanic coating, applied in spots. PCB material serves as a base. For processing hard materials with short chips. 1 x 1.8 mm 8 mm 1 mm x 1.8 mm 8 mm 1 mm x 1.8 mm 8 mm 1 mm Set Price Flexible diamond file set ( pieces) he set contains one file of each grit iamond strips iamond strips imensions Price Flexible strips with galvanic coating and synthetic backing. High stock removal with a fine grinding pattern. 80 x 0 mm x 0 mm el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

38 . iamond and CBN tools //.. iamond sheets and strips iamond-coated PE strips PE and metal iamond-coated PE strips, self-adhesive imensions pieces Strip thickness µm. Highly flexible abrasive film for use in tool and mould building. Particularly suited to high gloss polishing. he sheets are waterproof and are characterised by very high tensile strength and heat resistance. Can be cut to any desired dimension. Applications: carbide metal, ceramic, glass, hardened steels, jewellery, stone. x 10 mm 0 µm µm µm µm µm 0 0 µm 0 0 µm 0 0 Set Set price iamond-coated PE strip set he set contains one sheet of each grit 1 iamond-coated metal foils, self-adhesive imensions Bonding pieces Strip thickness mm. iamondcoated 10 x 100 mm galvanic # 10/ metal foil. Galvanic bonding. Very high stock removal. Flexible and galvanic # 10/ can be cut to with scissors. galvanic # 00/ 0 0 Applications: carbide metal, ceramic, glass, hardened steels, fibreglass, jewellery, stone. galvanic # 00/ 0 0 galvanic # 00/ galvanic # 00/ galvanic # 800/ galvanic # 100/ galvanic # 1800/ x 100 mm galvanic # 10/ galvanic # 10/ galvanic # 00/ galvanic # 00/ galvanic # 00/ galvanic # 00/ galvanic # 800/ galvanic # 100/ galvanic # 1800/ el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de 1

39 1. iamond and CBN tools //.. iamond sheets and strips iamond and CBN Special tools For service You have an aim, but not yet a solution. We can develop the complete tool on your behalf - starting with the design drafting stage, including manufacture of the blank, to coating. You already know your requirements, but are still not aware of the best possible, most economical solution. You provide us with your drawing (or even just a sketch) and we will deal with the rest, right down to the ready-to-use tool. You already have a blank of the tool, or even a worn tool. We will rework the tool on your behalf and apply the necessary coating. beyond the call of duty. Notes on manufacture of the carriers (blanks) Material: Blanks should preferably be made of low alloyed or unalloyed chromium-free steels, e.g. C 0, C, S, which guarantees optimum bonding between the galvanic layer and blank. Prerequisite: fine turning, milling or grinding are adequate machining operations for surfaces to be coated. Selection of the grit : It is advisable to select the grit as coarse as the desired surface quality allows. We recommend 1 as a medium grit for general grinding of metals and hard materials. s > should preferably not be used. Coarser diamond grits in the range of 181 to 0 can be used in plastic and rubber finishing. Fine and extremely fine grits can be used for special applications. Recoating of worn tools ools with galvanic bonding, like any other tools, are subject to natural wear and tear. Since the service life of a tool considerably affects the productivity of the working process and the price of the product to be manufactured, extending tool service life is a decisive factor. his is why our tools can be recoated several times. his is of value primarily when on the one hand, the proportion of expenditure for design and/or manufacture of the carrier has incurred a considerable percentage of the costs or when appropriately high numbers of the same tools exist. he prerequisite in this case is merely that the carrier remains free of defects in terms of true running and geometrical shape. ressing of a damaged carrier after the coating is lost is worthwhile only in exceptional cases, since in most cases, the requisite expenditure for repairs approximates that of a newly manufactured product. hickness of the abrasive coating For a tolerated dimension in the coated area, account must be taken of the coating thickness when manufacturing the blank. Please contact our Product Manager Stefan Spiegel on all issues regarding (special) diamond tools: el. +9 (0) 0 / s.spiegel@joke.de 18 el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

40 . iamond and CBN tools //.. iamond sheets and strips iamond and CBN special tools iamond and boron nitride (CBN) special tools with galvanic coating iamond and CBN belong to the group of super-hard cutting materials owing to their hardness and resistance to wear. Galvanic bonded tools are used both in wet and dry grinding. In the case of the galvanic bonded abrasives, the diamond or CBN grit is applied to the base in a nickel layer. he grits are between 0 and 0 % embedded as standard and a high chip space volume and aggressive stock removal results from the high grit projection. he embedding depth can be further reduced for processing rubber in order to achieve a cooler cut. he range of grit s for manufacturing special tools ranges from 1 (ultrafine) to 01 (very coarse). 1 Whether a diamond or CBN coating is used depends on the material to be processed. iamond is employed for carbide metal, rubber, fibreglass reinforced plastic (FRP), carbon fibre reinforced plastic (CFR), ferrite, glass and porcelain, whereas CBN is used for HSS and annealed and hardened steels. el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de 19

41 1 1 iamond machine files iamond hand files iamond slot files Conical diamond files iamond files iamond files are the universal tools for mould builders and toolmakers. hey are rapid and precise in stock removal and hard-wearing and are therefore economical to use. Optimally usable on case hardening and tenacious unhardened steels, for example during elimination of hardness distortion or burr formation on cutting, moulding and punching tools. iamond-coated files are also used for processing of carbide metal, ceramic, glass fibre-reinforced plastics, carbon fibre-reinforced plastics, carbide metal green products, ferrites and many more. Owing to the diamond grits projecting from the bond, optimum results can already be obtained with light contact pressure. s of 0 (very fine) to (very coarse) are available. You have a choice between diamond files for use in hand-filing machines or for manual use. he range is rounded off by conically shaped diamond files, likewise for machine and manual use. Now completely new in the range: the joke diamond slot files allow work in even the narrowest gaps - available from 0. mm thickness and above (page ). 0

42 iamond machine riffle files JLB, shank Ø mm, galvanic bonding imensions Coating. iamond and CBN tools //.. iamond files iamond machine riffle files, JLB shank Ø mm, total mm otal ype pieces flat. x 1. mm mm mm 10 JLB x 1. mm mm mm 10 JLB flat, bent. x 1. mm mm mm 10 JLB flat, offset. x 1. mm mm mm 10 JLB flat, angled. x 1. mm mm mm 10 JLB round Ø mm mm mm 10 JLB round, bent Ø mm mm mm 10 JLB triangular. x. mm mm mm 10 JLB crossing x mm mm mm 10 JLB semicircular, offset x mm mm mm 10 JLB Set Price iamond machine file set JLB contents: 10 files 1

43 1. iamond and CBN tools //.. iamond files iamond machine files JA shank Ø mm, total 0 mm iamond machine files JA, shank Ø mm, galvanic bonding seller! imensions Coating otal Best- ype pieces flat x 1 mm 1 mm 0 mm JA x 1 S x 1 mm 1 mm 0 mm 91 JA x 1 S x 1 mm 1 mm 0 mm 1 JA x 1 S x 1 mm 1 mm 0 mm 11 JA x 1 S x 1 mm 1 mm 0 mm JA x 1 S x 1 mm 1 mm 0 mm 91 JA x 1 S x 1 mm 1 mm 0 mm 1 JA x 1 S x 1 mm 1 mm 0 mm 1 JA x 1 S x 1 mm 1 mm 0 mm JA x 1 S x 1 mm 1 mm 0 mm 91 JA x 1 S x 1 mm 1 mm 0 mm 1 JA x 1 S x 1 mm 1 mm 0 mm 11 JA x 1 S x mm 1 mm 0 mm JA x S x mm 1 mm 0 mm 91 JA x S x mm 1 mm 0 mm 1 JA x S x mm 1 mm 0 mm 11 JA x S flat, safe-sided file x 1 mm 1 mm 0 mm JA x x 1 mm 1 mm 0 mm 11 JA x x 1 mm 1 mm 0 mm JA x x 1 mm 1 mm 0 mm 11 JA x x 1 mm 1 mm 0 mm JA x x 1 mm 1 mm 0 mm 11 JA x x mm 1 mm 0 mm JA x x mm 1 mm 0 mm 11 JA x flat, file, only edges coated 0. x mm 1 mm 0 mm JA 0. x x mm 1 mm 0 mm 11 JA 0. x x mm 1 mm 0 mm JA 0. x x mm 1 mm 0 mm 11 JA 0. x x mm 1 mm 0 mm JA 1 x x mm 1 mm 0 mm 11 JA 1 x el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

44 iamond machine files JA, shank Ø mm, galvanic bonding Coating otal. iamond and CBN tools //.. iamond files iamond machine files JA shank Ø mm, total 0 mm ype pieces round Ø 1 mm 1 mm 0 mm JA Ø 1 mm 1 mm 0 mm 91 JA Ø 1 mm 1 mm 0 mm 1 JA Ø mm 1 mm 0 mm JA Ø mm 1 mm 0 mm 91 JA Ø mm 1 mm 0 mm 1 JA Ø mm 1 mm 0 mm JA Ø mm 1 mm 0 mm 91 JA Ø mm 1 mm 0 mm 1 JA triangular x mm 1 mm 0 mm JA S x mm 1 mm 0 mm 91 JA S x mm 1 mm 0 mm 1 JA S x mm 1 mm 0 mm JA S x mm 1 mm 0 mm 91 JA S x mm 1 mm 0 mm 1 JA S i Other shapes, dimensions and grit s available at short notice! Please consult Stefan Spiegel: el. +9 (0) 0 / s.spiegel@joke.de iamond machine files JE shank Ø mm, total 8 mm iamond machine files JE, shank Ø mm, galvanic bonding Bestseller! imensions imensions Coating otal ype pieces flat, safe-sided file x 1. mm mm 8 mm 0 JE x 1. mm mm 8 mm JE x 1. mm mm 8 mm 91 JE x 1. mm mm 8 mm 1 JE x 1. mm mm 8 mm 181 JE round Ø mm mm 8 mm 0 JE Ø mm mm 8 mm JE 0 0 Ø mm mm 8 mm 91 JE 0 0 Ø mm mm 8 mm 1 JE 0 0 Ø mm mm 8 mm 181 JE 0 0 el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

45 1. iamond and CBN tools //.. iamond files iamond machine files LM total 10 / 00 mm iamond machine files LM, galvanic bonding imensions Coating otal 80 / 10 mm ype pieces flat 9 x. mm 80 mm 10 mm 91 LM x. mm 80 mm 10 mm 1 LM x.8 mm 10 mm 00 mm 91 LM x.8 mm 10 mm 00 mm 1 LM / 00 mm Other shapes, dimensions and grit s available at short notice! iamond machine files LGB shank Ø mm, total 180 mm iamond machine files LGB, shank Ø mm, galvanic bonding imensions Coating otal ype pieces flat 10 x. mm 90 mm 180 mm 91 LGB x. mm 90 mm 180 mm 1 LGB x. mm 90 mm 180 mm 181 LGB Set Price iamond machine file set LGB contents: files iamond machine file set LGB contents: files iamond machine file set LGB contents: files he sets consist of the following files respectively: 1 x flat 10 x. mm 1 x round Ø. mm 1 x triangular mm 1 x square. mm 1 x semi-circular 8. x mm

46 Original IPROFIL iamond hand files IPROFIL BH, shank Ø mm, galvanic bonding. iamond and CBN tools //.. iamond files imensions Coating iamond hand files IPROFIL BH shank Ø mm, total 10 mm otal ype pieces flat x 1. mm 0 mm 10 mm BH x 1. mm 0 mm 10 mm BH x 1. mm 0 mm 10 mm 1 BH flat, rounded x 1. mm 0 mm 10 mm BH x 1. mm 0 mm 10 mm BH x 1. mm 0 mm 10 mm 1 BH round Ø mm 0 mm 10 mm BH Ø mm 0 mm 10 mm BH Ø mm 0 mm 10 mm 1 BH triangular. mm 0 mm 10 mm BH mm 0 mm 10 mm BH mm 0 mm 10 mm 1 BH square. x. mm 0 mm 10 mm BH x. mm 0 mm 10 mm BH x. mm 0 mm 10 mm 1 BH crossing x mm 0 mm 10 mm BH x mm 0 mm 10 mm BH x mm 0 mm 10 mm 1 BH knife 1. x mm 0 mm 10 mm BH x mm 0 mm 10 mm BH x mm 0 mm 10 mm 1 BH pointed. x 1. mm 0 mm 10 mm BH x 1. mm 0 mm 10 mm BH x 1. mm 0 mm 10 mm 1 BH barrette x mm 0 mm 10 mm BH x mm 0 mm 10 mm BH x mm 0 mm 10 mm 1 BH semicircular x mm 0 mm 10 mm BH x mm 0 mm 10 mm BH x mm 0 mm 10 mm 1 BH Set Price iamond hand files set IPROFIL BH, 10 pieces

47 1. iamond and CBN tools //.. iamond files iamond hand files LH shank Ø mm, total 10 mm iamond hand files LH, shank Ø mm, galvanic bonding imensions Coating otal Bestseller! ype pieces flat x 1. mm 0 mm 10 mm 91 LH x 1. mm 0 mm 10 mm 1 LH x 1. mm 0 mm 10 mm 181 LH round Ø mm 0 mm 10 mm 91 LH Ø mm 0 mm 10 mm 1 LH Ø mm 0 mm 10 mm 181 LH triangular. mm 0 mm 10 mm 91 LH mm 0 mm 10 mm 1 LH mm 0 mm 10 mm 181 LH square. x. mm 0 mm 10 mm 91 LH x. mm 0 mm 10 mm 1 LH x. mm 0 mm 10 mm 181 LH semicircular. x mm 0 mm 10 mm 91 LH x mm 0 mm 10 mm 1 LH x mm 0 mm 10 mm 181 LH crossing x. mm 0 mm 10 mm 1 LH he matching file handles are to be found on page Illustration approx. original! Set Price iamond hand files LH, pieces el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

48 Original IPROFIL iamond hand files IPROFIL L, shank Ø mm, galvanic bonding. iamond and CBN tools //.. iamond files imensions Coating iamond hand files IPROFIL L shank Ø mm, total 10 mm otal ype pieces flat x 1. mm 0 mm 10 mm 10 L x 1. mm 0 mm 10 mm 10 L flat, bent. x 1. mm 0 mm 10 mm 10 L round Ø. mm 0 mm 10 mm 10 L round, bent Ø. mm 1 mm 10 mm 10 L triangular x mm 0 mm 10 mm 10 L square. x. mm 0 mm 10 mm 10 L semicircular x mm 0 mm 10 mm 10 L crossing x. mm 0 mm 10 mm 10 L knife x 1. mm 0 mm 10 mm 10 L Set Price iamond hand file set IPROFIL L, 10 pieces

49 1. iamond and CBN tools //.. iamond files iamond hand files LK shank. x. mm, total 10 mm iamond hand files LK, shank Ø. x. mm, galvanic bonding imensions Coating otal ype pieces flat x 1. mm 0 mm 10 mm 0 LK x 1. mm 0 mm 10 mm LK x 1. mm 0 mm 10 mm 91 LK x 1. mm 0 mm 10 mm 1 LK round Ø 1. mm 0 mm 10 mm 0 LK Ø 1. mm 0 mm 10 mm LK Ø 1. mm 0 mm 10 mm 91 LK Ø 1. mm 0 mm 10 mm 1 LK triangular. x. mm 0 mm 10 mm 0 LK x. mm 0 mm 10 mm LK x. mm 0 mm 10 mm 91 LK x. mm 0 mm 10 mm 1 LK square 1.8 x 1.8 mm 0 mm 10 mm 0 LK x 1.8 mm 0 mm 10 mm LK x 1.8 mm 0 mm 10 mm 91 LK x 1.8 mm 0 mm 10 mm 1 LK semicircular.1 x 1.8 mm 0 mm 10 mm 0 LK x 1.8 mm 0 mm 10 mm LK x 1.8 mm 0 mm 10 mm 91 LK x 1.8 mm 0 mm 10 mm 1 LK Set Price iamond hand files LK, pieces el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

50 iamond hand files XS, shank-ø - mm, galvanic bonding imensions Coating. iamond and CBN tools //.. iamond files iamond hand files XS shank Ø - mm, total 10 mm otal ype pieces flat.1 x 0.9 mm 0 mm 10 mm XS x 0.9 mm 0 mm 10 mm 91 XS x 0.9 mm 0 mm 10 mm 1 XS round Ø.8 mm 0 mm 10 mm XS Ø.8 mm 0 mm 10 mm 91 XS Ø.8 mm 0 mm 10 mm 1 XS triangular. mm 0 mm 10 mm XS mm 0 mm 10 mm 91 XS mm 0 mm 10 mm 1 XS square.9 mm 0 mm 10 mm XS mm 0 mm 10 mm 91 XS mm 0 mm 10 mm 1 XS semicircular.8 x 1. mm 0 mm 10 mm XS x 1. mm 0 mm 10 mm 91 XS x 1. mm 0 mm 10 mm 1 XS i XS = EXRA NARROW Flat files are ideal for working on components were access is difficult. When there is barely space for a sheet in between, these extra flat files with diamond coating are ideal. hey allow you to reach slots or corners that you would previously never dared to imagine. Set Price iamond hand files set XS, pieces el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de 9

51 1. iamond and CBN tools //.. iamond files iamond hand files LG shank x mm, total 1 mm LG diamond hand files, shank Ø x mm, galvanic bonding imensions Coating otal ype pieces flat 10 x mm 110 mm 1 mm 91 LG x mm 110 mm 1 mm 1 LG x mm 110 mm 1 mm 181 LG round Ø.8 mm 110 mm 1 mm 91 LG Ø.8 mm 110 mm 1 mm 1 LG Ø.8 mm 110 mm 1 mm 181 LG triangular 10 mm 110 mm 1 mm 91 LG mm 110 mm 1 mm 1 LG mm 110 mm 1 mm 181 LG square.1 mm 110 mm 1 mm 91 LG mm 110 mm 1 mm 1 LG mm 110 mm 1 mm 181 LG semicircular 1. x mm 110 mm 1 mm 91 LG x mm 110 mm 1 mm 1 LG x mm 110 mm 1 mm 181 LG Set Price iamond hand files LG, pieces matching holder Price File holder, with spring-loaded rotary knob tensioning, for LG diamond files el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

52 Bestseller!. iamond and CBN tools //.. iamond files iamond hand file sets shank Ø mm 1 x 1.9 mm Coating otal Set price.9 mm.9 mm 0 mm 10 mm Ø. mm x 1. mm.9 mm x 1.9 mm.9 mm Coating otal Set price 0 mm 180 mm Ø. mm x 1. mm iamond workshop files WF-K coating 10 mm, total 00 mm iamond workshop files WF-K, galvanic bonding imensions Coating otal ype pieces flat x 0 mm 10 mm 00 mm 1 WF-K triangular 1 mm 10 mm 00 mm 1 WF-K square 8 mm 10 mm 00 mm 1 WF-K semicircular Ø x 1 mm 10 mm 00 mm 1 WF-K round Ø 8 mm 10 mm 00 mm 1 WF-K iamond workshop files WF coating 180 mm, total 0 mm iamond workshop files WF-K, galvanic bonding imensions Coating otal ype pieces flat x 0 mm 180 mm 0 mm 1 WF x 0 mm 180 mm 0 mm 181 WF el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de 1

53 1. iamond and CBN tools //.. iamond files iamond riffle hand files LR total 10 mm iamond riffle hand files LR, galvanic bonding imensions Coating otal ype pieces flat. x 1.8 mm x mm 10 mm 91 LR x 1.8 mm x mm 10 mm 1 LR x 1.8 mm x mm 10 mm 181 LR round Ø. mm x mm 10 mm 91 LR Ø. mm x mm 10 mm 1 LR 0 0 Ø. mm x mm 10 mm 181 LR 0 0 round, bent Ø. mm x mm 10 mm 91 LR Ø. mm x mm 10 mm 1 LR 0 0 Ø. mm x mm 10 mm 181 LR 0 0 triangular.9 mm x mm 10 mm 91 LR mm x mm 10 mm 1 LR mm x mm 10 mm 181 LR 0 0 square. x. mm x mm 10 mm 91 LR x. mm x mm 10 mm 1 LR x. mm x mm 10 mm 181 LR square, flat x mm x mm 10 mm 91 LR x mm x mm 10 mm 1 LR x mm x mm 10 mm 181 LR crossing.8 x 1. mm x mm 10 mm 91 LR x 1. mm x mm 10 mm 1 LR x 1. mm x mm 10 mm 181 LR matching holder Price File holder for riffle files up to 10 mm el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

54 iamond slot file SF, with wooden haft, galvanic bonding imensions Coating otal. iamond and CBN tools //.. iamond files iamond slot files SF total mm ype pieces flat x 0. mm 0 mm 10 mm SF x 0. mm 0 mm 10 mm SF x 0. mm 0 mm 10 mm SF mm 10 mm 91 SF x 0. mm 0 mm 10 mm SF mm 10 mm 91 SF x 0. mm 0 mm 10 mm SF x 0. mm 0 mm 10 mm SF x 0. mm 0 mm 10 mm SF mm 10 mm 91 SF x 0. mm 0 mm 10 mm SF mm 10 mm 91 SF x 0. mm 80 mm 180 mm SF x 0. mm 80 mm 180 mm SF x 0. mm 80 mm 180 mm SF mm 180 mm 1 SF x 0. mm 80 mm 180 mm SF mm 180 mm 1 SF i Looking for another? No problem! Other widths, grit s and thicknesses of between 0.1 and 1 mm are available at short notice! Please consult Stefan Spiegel: el. +9 (0) 0 / s.spiegel@joke.de el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

55 1. iamond and CBN tools //.. iamond files Conical diamond machine files IPROFIL LM shank Ø x mm, total 90 mm Conical diamond machine files IPROFIL LM, shank Ø x mm Coating dimensions B x LB Coating thickness C/C1 Shank dimensions S/S1 otal Original IPROFIL. x 0 mm 0. / 1. mm Ø x mm 90 mm / 1. mm Ø x mm 90 mm / 1. mm Ø x mm 90 mm / 1. mm Ø x mm 90 mm pieces x 0 mm 0. / 1. mm Ø x 0 mm 90 mm / 1. mm Ø x 0 mm 90 mm / 1. mm Ø x 0 mm 90 mm / 1. mm Ø x 0 mm 90 mm x 0 mm 0. / 1. mm Ø x mm 90 mm / 1. mm Ø x mm 90 mm / 1. mm Ø x mm 90 mm / 1. mm Ø x mm 90 mm S C1 B S1 LB C Set Price IPROFIL LM Conical diamond machine file set, pieces / / / el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

56 . iamond and CBN tools //.. iamond files Conical diamond machine files LSF shank Ø x 0 mm, total / mm 1 Conical diamond machine files LSF, shank Ø x 0 mm S S1 C1 LB B C Coating dimensions B x LB Coating thickness C/C1 Shank dimensions S/S1 otal x 1 mm 0. / 0.9 mm Ø x 0 mm mm # / 0.9 mm Ø x 0 mm mm # / 0.9 mm Ø x 0 mm mm # / 1. mm Ø x 0 mm mm # / 1. mm Ø x 0 mm mm # / 1. mm Ø x 0 mm mm # pieces x 1 mm 0. / 0.9 mm Ø x 18 mm mm # / 0.9 mm Ø x 18 mm mm # / 0.9 mm Ø x 18 mm mm # / 1. mm Ø x 18 mm mm # / 1. mm Ø x 18 mm mm # / 1. mm Ø x 18 mm mm # Set Price Conical diamond machine files LSF, s el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

57 1. iamond and CBN tools //.. iamond files Conical diamond machine files LC shank Ø x 1 x 1 mm, total mm Conical diamond machine files LC, shank x 1 x 1 mm Coating dimensions B/B1 x LB Coating thickness C/C1 Shank dimensions S/S1 otal pieces S S1 C1 B1 LB B C / x 0 mm 0. / 1 mm Ø x 1 mm mm # / 1 mm Ø x 1 mm mm # / 1 mm Ø x 1 mm mm # / x 0 mm 0. / 1 mm Ø x 1 mm mm # / 1 mm Ø x 1 mm mm # / 1 mm Ø x 1 mm mm # / 1 mm Ø x 1 mm mm # / x 0 mm 0. / 1 mm Ø x 1 mm mm # / 1 mm Ø x 1 mm mm # / 1 mm Ø x 1 mm mm # Set Price Conical diamond machine file set LC, 10 pieces Conical diamond machine files LFL shank Ø 8 x 1 x 0 mm, total 0 / 0 / 90 mm Conical diamond machine files LFL, shank 8 x 1 x 0 mm Coating dimensions B/B1 x LB Coating thickness C/C1 Shank dimensions S/S1 otal pieces / x mm 0. / 1 mm Ø 8 x 0 mm 0 mm # S B1 B 0. / 1 mm Ø 8 x 0 mm 0 mm # / 1 mm Ø 8 x 0 mm 0 mm # S1 C1 LB C / x mm 0. / 1 mm Ø 8 x 0 mm 0 mm # / 1 mm Ø 8 x 0 mm 0 mm # / 1 mm Ø 8 x 0 mm 0 mm # / x 0 mm 0. / 1 mm Ø 8 x 0 mm 0 mm # / 1 mm Ø 8 x 0 mm 0 mm # / 1 mm Ø 8 x 0 mm 0 mm # / 8 x 0 mm 0. / 1 mm Ø 8 x 0 mm 90 mm # / 1 mm Ø 8 x 0 mm 90 mm # / 1 mm Ø 8 x 0 mm 90 mm # File holder Price File holder Ø 11 x 10 mm for conical diamond files el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

58 Conical diamond hand files JM, shank Ø mm Coating dimensions B/B1 x LB. iamond and CBN tools //.. iamond files Conical diamond hand files JM shank Ø mm, total 10 mm Coating thickness C/C1 Shank dimensions S/S1 otal. x 0 mm 0. / 1. mm Ø x mm 10 mm / 1. mm Ø x mm 10 mm / 1. mm Ø x mm 10 mm x 0 mm 0. / 1. mm Ø x mm 10 mm / 1. mm Ø x mm 10 mm / 1. mm Ø x mm 10 mm x 0 mm 0. / 1. mm Ø x mm 10 mm / 1. mm Ø x mm 10 mm / 1. mm Ø x mm 10 mm pieces 1 S1 B S C1 LB C Set Price Conical diamond hand file set JM, 10 pieces iamond files are particularly suitable for processing hardened steel, carbide metal, ceramic, porcelain, glass, rubber or plastic in toolmaking and jig construction. hese files are also excellent for filing work on tools for cutting, punching, embossing and shaping. Slight pressure is sufficient to achieve good abrasion. High pressure on the other hand may promote wear. Available as standard in different grit s (FEPA standard). Should you require special grit s or other models, please consult us. 0-91, for fine filing 10-1, for universal use , for pre-filing plastic covering for hand files Colour Price Ø x mm, for hand files with shank Ø mm yellow black blue el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

59 1. iamond and CBN tools //.. iamond files Conical diamond hand files LP shank Ø mm, total 10 mm Conical diamond hand files LP, with plastic covering, shank Ø mm Coating dimensions B/B1 x LB Coating thickness C/C1 Shank dimensions S/S1 otal 10 pieces S1 S C1 LB B C x 0 mm 0. / 1.9 mm Ø x 8 mm 10 mm # / 1.9 mm Ø x 8 mm 10 mm # / 1.9 mm Ø x 8 mm 10 mm # x 0 mm 0. / 1. mm Ø x mm 10 mm # / 1. mm Ø x mm 10 mm # / 1. mm Ø x mm 10 mm # x 0 mm 0. / 1. mm Ø x mm 10 mm # / 1. mm Ø x mm 10 mm # / 1. mm Ø x mm 10 mm # Ø 0. / x 0 mm 0. / mm Ø x 90 mm 10 mm # Round files 0. / mm Ø x 90 mm 10 mm # / mm Ø x 80 mm 10 mm # Set Price Conical diamond hand file set LP, 10 pieces File holder Price File holder for conical diamond files LP Conical diamond hand files LV shank / / 8 mm, total 10 mm Conical diamond hand files LV, shank Ø / / 8 x 10 mm Coating dimensions B/B1 x LB Coating thickness C/C1 mm Shank dimensions S/S1 otal Price from 10 pieces Price from 1 pieces S1 B1 B / x 0 mm 0. / mm x 10 mm 10 mm # / mm x 10 mm 10 mm # S C1 LB C 0. / mm x 10 mm 10 mm # / x 0 mm 0. / mm x 10 mm 10 mm # / mm x 10 mm 10 mm # / mm x 10 mm 10 mm # / x 0 mm 0. /. mm x 10 mm 10 mm # /. mm x 10 mm 10 mm # /. mm x 10 mm 10 mm # / 8 x 0 mm 0. /. mm 8 x 10 mm 10 mm # /. mm 8 x 10 mm 10 mm # /. mm 8 x 10 mm 10 mm # Set Price Conical diamond hand file set LV, s el. +9 (0) 0 / Fax +9 (0) 0 / info@joke.de

60 Original IPROFIL Conical diamond hand files IPROFIL LS, shank Ø / / 8 mm. iamond and CBN tools //.. iamond files Conical diamond hand files IPROFIL LS shank Ø / / 8 mm, total 10 mm Coating dimensions B/B1 x LB Coating thickness C/C1 Shank dimensions S/S1 otal / x 0 mm 0. / mm x 10 mm 10 mm / mm x 10 mm 10 mm / mm x 10 mm 10 mm / mm x 10 mm 10 mm / x 0 mm 0. / mm x 10 mm 10 mm / mm x 10 mm 10 mm / mm x 10 mm 10 mm / mm x 10 mm 10 mm / x 0 mm 0. /. mm x 10 mm 10 mm /. mm x 10 mm 10 mm /. mm x 10 mm 10 mm /. mm x 10 mm 10 mm pieces 1 8 / 8 x 0 mm 0. /, mm 8 x 10 mm 10 mm /. mm 8 x 10 mm 10 mm /. mm 8 x 10 mm 10 mm /. mm 8 x 10 mm 10 mm S1 B1 B S C1 LB C Set Price Conical diamond hand file set IPROFIL LS, 10 pieces Set Price Conical diamond hand file set IPROFIL LS-F, 10 pieces