MPF Multiport. Maximum pressure 8 bar F l o w r a t e s t o l / m i n
|
|
- Bennett Reeves
- 5 years ago
- Views:
Transcription
1 MPF Multiport Maximum pressure 8 bar F l o w r a t e s t o 7 5 l / m i n
2 echnical data Filter housing (Materials) ead: luminium Cover: Nylon (only for: MPF 4) luminium (all the other) owl: Nylon Pressure Working pressure: 8 bar emperature From 5 C to + C ypass valve Opening pressure.75 bar ±% Opening pressure bar ±% Δp Elements type Series N and elements: bar Oil flow from outside to inside. s Standard NR Optional FPM series series V MPF FILERS RE PROVIDED FOR VERICL MOUNING Compatibility (to ISO 94) ousings compatible with: Mineral oils, synthetic fluids. queous emulsions, water and glycol (series W required). he filter elements are compatible with: Mineral oils, synthetic fluids. queous emulsions, water and glycol (series W required). NR seals series, compatible with: Mineral oils, synthetic fluids. queous emulsions, water and glycol. FPM seals V series, compatible with: Synthetic fluids type SFDRFDSFDU Filter housings Δp pressure drop he curves are plotted utilising mineral oil with density of.86 kg/dm to ISO 968. Δp varies proportionally with density., MPF MPF Weights (kg) Length 4 MPF, MPF,4 MPF,6,64,67,74 MPF 4,8,96,,5 MPF,64,68,7,78 MPF 8,, MPF 8,, MPF 84,55,45 MPF 9, MPF 9, MPF 94,45 MPF 4,5,65,9 MPF 4545,95 4,5 4,5 MPF 75 6, Volumes (dm ) Length 4 MPF,6 MPF,9 MPF,64,85,,65 MPF 4,64,85,,65 MPF 8,5 4, MPF 8,5 4, MPF 84,65 4,45 MPF 9 4,5 MPF 9 4,5 MPF 94 4,45 MPF 4,7 4,6 5,4 MPF 4545,7 4,6 5,4 MPF 75 8,45,5,,5,6,45,, MPF 4 Length G /4
3 ,4 MPF 4 Length 4 Valves ypass valve pressure drop,,, G /4 5,75,5 MPF bar,75 bar 6 8 4,5,4,,, MPF MPF MPF 8x MPF 9x 6 4, MPF 4 bar,75 bar , ,6 MPF Length G / G 8 MPF MPF ,45 6 bar,,5 4,75 bar ,4 MPF Length MPF 75 Length 6 MPF bar, G / G 4,5,75 bar,,,
4 Recoended maximum flow rate Pressure drop of filter assembly equal to Δp,5 bar. Oil kinematic viscosity /s (cst). Density,86 kg/dm. Length Filtration P P5 M5 M6 M9 MPF MPF MPF MPF MPF MPF MPF MPF
5 Dimensions MPF MPF Ø No. Spotfaces Ø No. holes Ø 6,5 Flat seal Ø 76 4 Ø 4 Ø 59 Ø Ø G / G /8 Ø 7 oles on the tank oles on the tank 6 Ø 77 IN Ø 67 9 Ø 94 M6 M6 MPF Connection P 4 ose barb Ø MPF hread connections G / NP SE 8 /4 6 UNF
6 MPF Ø 88 Ø 8 4 G /8 Ø 8 55 oles on the tank M8 66 8,5 68 Ø 89 hread connections Filter Length ,5 46,5 indicator port G /4 /4 NP ON REQUES G G G G G6 G G9 G not machined C C C C C4 C5 C6 C C7 C8 C9 C G /8 G /8 G /8 G /8 /8 NP /8 NP /8 NP /8 NP /8 NP /8 NP /8 NP /8 NP G / NP /4 NP NP /4 NP SE 8 /4 6 UNF SE /6 UN SE 6 5/6 UN SE 5/8 UN 5
7 MPF Ø 88 4 Flat seal 4 G /8 9 Ø 8 7 oles on the tank Ø 89 Ø 4 Ø 8 45 M8 hread connections Filter Length ,5 46,5 G G G G6 G9 not machined C C C C4 C5 C6 C7 C8 C9 G /8 G /8 G /8 /8 NP /8 NP /8 NP /8 NP /8 NP /8 NP G / NP /4 NP NP SE 8 /4 6 UNF SE /6 UN SE 6 5/6 UN 6
8 MPF Multiport Standard Single In Port Multiport Double In Port Option: Double Indicator Port Multiport Double In Port Drain Port Option: Indicator Port Multiport Double In Port Double Drain Port 8
9 MPF Ø 88 4 Øe Ø 8 5 Ø 8 G /8 55 oles on the tank M8 8,5 4 Ø hread connections G G G G G6 G G9 G G /8 G /8 G /8 G /8 /8 NP /8 NP /8 NP /8 NP /8 NP /8 NP /8 NP /8 NP G / NP /4 NP NP /4 NP SE 8 /4 6 UNF SE /6 UN SE 6 5/6 UN SE 5/8 UN Filter Length ,5 46,5 indicator port G /4 /4 NP ON REQUES hread connections G G G G G6 G G9 G hread connections G /8 /8 NP SE 6 9/6 8 UNF / NP SE 8 /4 6 UNF 9
10 MPF 8 9 MPF Ø 9,5 5 9 Ø 9,5 9 Ø Ø Ø 95 Ø 95 G /8 Indicator port 95 G / Ø 95 Ø option holes on the tank MPF Filter Length holes assembly 4 holes assembly Ø 75 Ø 75 MPF 8 9 hread connections Ø Ø 9 G G not machined C C4 C7 C C5 C8 G /8 /8 NP /4 NP /8 NP SE 5/8 UN G /8 G / /8 NP / NP /8 NP SE 4 7/8 UN M IN 45 M IN 45 MPF 8 9 hread connections G Ind. port not mach. C C4 C7 G /8 /8 NP /4 NP /8 NP SE 5/8 UN hread connections G C C4 C7 hread connections (only for MPF 8 9) / NP SE 8 /4 6 UNF /4 NP SE /6 UN indicator port G /4 /4 NP ON REQUES
11 MPF connection port MPF connection port Ø 56 4 Ø 5,5 Ø 4 Ø 5,5 56 Ø 59 oles on the tank Ø 6,5 M hread connections G G G G G6 G G / /4 NP / NP SE 5/8 UN SE 4 7/8 UN G / /4 NP / NP SE 5/8 UN SE 4 7/8 UN /4 NP /4 NP SE 5/8 UN SE 5/8 UN G /8 G /8 /8 NP /8 NP /8 NP /8 NP G /8 G /8 /8 NP /8 NP /8 NP /8 NP Flange connections* MPF Filter Length F / SE psi/m F / SE psi/unc F F4 / SE psi/m / SE psi/unc / SE psi/m / SE psi/unc *Connections table DN SE flange see page 5 G /8 /8 NP G /8 /8 NP
12 MPF 4 MPF ,5,5 Ø 7,5 97 E dditional port only for MPF Ø 7,5 48, Øe Ø 5 Ø 5 G /8 Ø,5 Ø,5 G /8 Indicator port 5 5 E 6 45 oles on the tank M Ø 74,5 9 MPF 4 hread connections Ø IN MPF hread connections G G NP SE / UN E () /4 NP SE G /8 /8 NP /8 NP G G G G6 G9 G / G /4 NP / NP NP SE 5/8 UN SE 4 7/8 UN SE / UN MPF Filter Length Flange connections MPF () F F SE psi/m SE psi/unc E () /4 NP G /8 /8 NP () dditional port only for MPF 45 () Connections table DN SE flange see page 5
13 MPF 75 48,5 4 Ø 7, Ø 64 Ø 5 G /8 Ø,5 6 oles on the tank M Ø 74,5 9 Ø IN hread connections Flange connections* G G NP SE / UN F F SE psi/m SE psi/unc *Connections table DN SE flange see page 5
14 Spare parts a b d c 6
15 Spare parts Item Description Q.ty FILER Series MPF 4 Filter assembly See order table See order table Kit NR FPM NR FPM NR FPM NR FPM a Cover seal OR 74 Ø 7,44 x,5 OR 74 Ø 7,44 x,5 OR 487 Ø 98, x,5 OR 487 Ø 98, x,5 b owl seal OR 5 Ø 56,8 x,6 OR 4 Ø 78,97 x,5 OR 4 Ø 78,97 x,5 c ead seal OR 75 Ø 69,5 x,6 OR 66 Ø 9,44 x 5, Length OR 4 Length OR 4 d seal OR 9 Ø,47 x,6 OR 9 Ø,47 x,6 Ø 8,7 x,5 Length 4 OR 46 Ø 8,7 x,5 Length 4 OR 46 Ø 4,86 x,5 Ø 4,86 x,5 Item Description Q.ty FILER Series MPF Filter assembly See order table See order table Kit NR FPM NR FPM NR FPM NR FPM a Cover seal OR 457 Ø 6, x,5 OR 45 Ø 9,8 x,5 OR 457 Ø 6, x,5 OR 45 Ø 9,8 x,5 b owl seal OR 445 Ø 7,5 x,5 OR 445 Ø 7,5 x,5 OR 445 Ø 7,5 x,5 OR 445 Ø 7,5 x,5 c ead seal OR 655 Ø 5,89 x 5,4 OR Ø,4 x 5,4 OR 655 Ø 5,89 x 5,4 OR Ø,4 x 5,4 d seal OR 46 Ø 4,86 x,5 OR 46 Ø 4,86 x,5 OR Metric Ø 5 x 4 OR Metric Ø 5 x 4 Item Description Q.ty FILER Series MPF Filter assembly See order table See order table Kit NR FPM NR FPM NR FPM a Cover seal OR 4675 Ø 7 x,5 OR 4675 Ø 7 x,5 OR 4675 Ø 7 x,5 b owl seal OR Ø 49, x 5,4 OR Ø 49, x 5,4 OR Ø 49, x 5,4 c ead seal OR Ø 8 x 6,99 OR Ø 8 x 6,99 OR 67 Ø 8,5 x 5,4 Length OR 55 Length OR 55 d seal Ø 5,8 x,5 Length OR 68 Ø 5,8 x,5 Length OR 68 OR 68 Ø 65,9 x,5 Ø 65,9 x,5 Ø 65,9 x,5 7
16 Ordering information MPF 4 Filter assembly MPF Example : MPF 4 G 6 E P Example : MPF G P 8 9 MF Example : MF 6 E P Example : MF P Style Filter 4 Filter length 4 4 Filter seals & reatment V NR FPM W* NR, head anodized Z* FPM, head anodized 4 Connections MPF P MPF G MPF 4 G G G G6 G9 not machined ose barb Ø / NP SE 8 /4 6 UNF C C C C4 C5 C6 C7 C8 C9 G /8 G /8 G /8 /8 NP /8 NP /8 NP /8 NP /8 NP /8 NP G / NP /4 NP NP SE 8 /4 6 UNF SE /6 UN SE 6 5/6 UN 5 Inorganic microfibre μ M5 M6 M9 P P5 7 seals V NR FPM 8 ypass valve E 9 Option P Inorganic microfibre 6 μ Inorganic microfibre μ Inorganic microfibre 6 μ Inorganic microfibre 5 μ 6 Δp N W* Resin impregnated paper Resin impregnated paper Δp bar (only for filter element type Pxx and Mxx) Δp bar (only for filter element type xx) Δp bar (only for filter element type xx and Mxx) bar MP Filtri standard bsolute filtration ßx (c) Nominal Filtration Nominal Filtration.75 bar (Omit in the element code only for.75 bar) * Compatible with fluid F, F, FC 8 MP Filtri he filter functions as described in this bulletin are valid exclusively for original MP Filtri filter elements and replacement parts. ll rights reserved he data in this publication are purely guideline. MP Filtri reserves the right to make changes to the models described herein at any time it deems fit in relation to technical or coercial requirements. he colours of the products shown on the cover are purely guideline. Copyright. ll rights reserved.
17 Filter assembly MPF Ordering information MPF Example : MPF G 6 E P Example : MPF W G W P 7 9 MF Example : MF 6 E P Example : MF W P Style Filter Filter length 4 4 Filter seals & reatment NR V FPM W* NR, head anodized Z* FPM, head anodized 4 Connections MPF G G G G G6 G G9 G MPF G G G G G6 G G9 G not machined G /8 G /8 G /8 G /8 /8 NP /8 NP /8 NP /8 NP /8 NP /8 NP /8 NP /8 NP C C C C C4 C5 C6 C C7 C8 C9 C G /8 G /8 G /8 G /8 /8 NP /8 NP /8 NP /8 NP /8 NP /8 NP /8 NP /8 NP G / NP /4 NP NP /4 NP SE 8 /4 6 UNF SE /6 UN SE 6 5/6 UN SE 5/8 UN G / NP /4 NP NP /4 NP SE 8 /4 6 UNF SE /6 UN SE 6 5/6 UN SE 5/8 UN 5 Connections (only for MPF ) G G G G G6 G G9 G 7 Δp N Δp bar (only for filter element type Pxx and Mxx) Δp bar (only for filter element type xx) W* Δp bar (only for filter element type xx and Mxx) 8 seals NR V FPM 9 ypass valve E bar.75 bar (Omit in the element code only for.75 bar) Option P G /8 6 Connections /8 NP / NP Inorganic microfibre μ 6 Inorganic microfibre 6 μ Inorganic microfibre μ 6 Inorganic microfibre 6 μ 5 Inorganic microfibre 5 μ M5 M6 M9 P P5 Resin impregnated paper Resin impregnated paper MP Filtri standard SE 6 9/6 8 UNF SE 8 /4 6 UNF * Compatible with fluid F, F, FC bsolute filtration ßx (c) Nominal Filtration Nominal Filtration MP Filtri he filter functions as described in this bulletin are valid exclusively for original MP Filtri filter elements and replacement parts. ll rights reserved he data in this publication are purely guideline. MP Filtri reserves the right to make changes to the models described herein at any time it deems fit in relation to technical or coercial requirements. he colours of the products shown on the cover are purely guideline. Copyright. ll rights reserved. 9
18 Ordering information NEW MPF 8899 Filter assembly MPF MF Example : MPF 8 G 6 E P Example : MPF 9 G P N P b Example : MF 8 6 E P Example : MF 9 P N P 7 9 a Style Filter Filter length 4 Connections MPF 8 9 G G MPF 8 9 G C C4 C7 C C5 C8 C C4 C Filter seals & reatment NR V FPM W* NR, head anodized Z* FPM, head anodized NR, flat seal on head D FPM, flat seal on head L NR, flat seal on head, head anodized M FPM, flat seal on head, head anodized not machined Ind. port not mach. G /8 /8 NP /8 NP G /8 /8 NP /8 NP G /8 /8 NP /8 NP /4 NP SE 5/8 UN G / / NP SE 4 7/8 UN /4 NP SE 5/8 UN 5 Connections (only for MPF 8 9) G C 6 Connections C4 / NP /4 NP Inorganic microfibre μ 6 Inorganic microfibre 6 μ Inorganic microfibre μ 6 Inorganic microfibre 6 μ 5 Inorganic microfibre 5 μ M5 M6 M9 P P5 C7 SE 8 /4 8 UNF SE /6 UN 7 Δp N Δp bar (only for filter element type Pxx and Mxx) Δp bar (only for filter element type xx) Δp bar W* (only for filter element type xx and Mxx) 8 seals NR V FPM 9 ypass valve E bar.75 bar (Omit in the element code only for.75 bar) Option a) Filter P Sxx MP Filtri standard Filter assembly with steel extension tube mounted (only for MPF 99) b) P Resin impregnated paper Resin impregnated paper MP Filtri standard bsolute filtration ßx (c) Nominal Filtration Nominal Filtration * Compatible with fluid F, F, FC MP Filtri he filter functions as described in this bulletin are valid exclusively for original MP Filtri filter elements and replacement parts. ll rights reserved he data in this publication are purely guideline. MP Filtri reserves the right to make changes to the models described herein at any time it deems fit in relation to technical or coercial requirements. he colours of the products shown on the cover are purely guideline. Copyright. ll rights reserved.
19 MPF MF Ordering information MPF Filter assembly Example : MPF 84 G 6 E P Example : MPF 75 P N P b Example : MF 8 6 E P Example : MF 75 P N P 8 9 a Style Filter Filter length Filter seals & reatment V NR FPM W* NR, head anodized Z* FPM, head anodized 4 Connections MPF G G G G G6 G F F F F4 G / /4 NP / NP SE 5/8 UN SE 4 7/8 UN G / /4 NP / NP SE 5/8 UN SE 4 7/8 UN / SE psi/m / SE psi/unc / SE psi/m / SE psi/unc MPF 4 G G G / G G /4 NP / NP G6 G9 /4 NP /4 NP SE 5/8 UN SE 5/8 UN / SE psi/m / SE psi/unc NP SE 5/8 UN SE 4 7/8 UN SE / UN MPF G G NP SE / UN F SE psi/m F SE psi/unc 5 Inorganic microfibre μ 6 Inorganic microfibre 6 μ Inorganic microfibre μ 6 Inorganic microfibre 6 μ 5 Inorganic microfibre 5 μ M5 M6 M9 P P5 6 Δp N Δp bar (only for filter element type Pxx and Mxx) Δp bar (only for filter element type xx) Δp bar W* (only for filter element type xx and Mxx) 7 seals NR V FPM 8 ypass valve E bar.75 bar (Omit in the element code only for.75 bar) 9 Option a) Filter P Sxx MP Filtri standard Filter assembly with steel extension tube mounted (only for MPF ) b) P Resin impregnated paper Resin impregnated paper MP Filtri standard E () /4 NP SE /4 NP * Compatible with fluid F, F, FC () dditional port only for MPF 45 bsolute filtration ßx (c) Nominal Filtration Nominal Filtration MP Filtri he filter functions as described in this bulletin are valid exclusively for original MP Filtri filter elements and replacement parts. ll rights reserved he data in this publication are purely guideline. MP Filtri reserves the right to make changes to the models described herein at any time it deems fit in relation to technical or coercial requirements. he colours of the products shown on the cover are purely guideline. Copyright. ll rights reserved.
Catalog HY /US SERIES DESCRIPTION BODY NO. PAGE NO.
Catalog HY15-350/US Contents odies and SERIES DESCRITION ODY NO. GE NO. RKER STNDRD ODIES ND ITIES C04-... 04, Way... 04--*... 7 C04-3... 04, 3 Way... 04-3-*... 8 C08-... 08, Way... 08--*... 9 C08-3...
More informationfrom 500 to 5000 RPM GEAR PUMPS P23
Displacement Pressure Speed from 0,80 to 11,80 ccm up to 310 bar from 500 to 5000 PM GEA PUMPS P23 Table of Contents P23 TABE OF CONTENTS DESCIPTION... 2 BASIC PATS... 2 PAAMET TABE... 3 FOMUAS USED FO
More informationGEAR PUMPS. Displacement from 10 to 100 ccm Pressure up to 290 bar Speed from 350 to 3200 RPM
Displacement from 10 to 100 ccm Pressure up to 290 bar Speed from 350 to 3200 PM GEA PUMPS Q2 Gear Pump Catalogue Q2 TABE OF CONTENTS DESCIPTION......................................................................................................................
More informationData sheet: Wilo-CronoNorm-NL 80/200-3/4
Data sheet: Wilo-CronoNorm-NL /-3/ Pump curves H/m 1 1 1 1 NPSH/m,5, 1,5 1,,5 P /kw 5 3 1 3 5 55% % 5% 7% 7% 7,9% 1 5 15 5 3 35 3 5 1 3 5 7% 7,3% 7% 7% 77,9% 7,% 7,% Ø 17 Eff. 7,9% Ø 1 Ø 19 7% Ø 19 Ø 1
More informationStandard pumps. Dimensions, weights Wilo-CronoLine-IL
Standard pumps Dimensions, weights Wilo-CronoLine-IL Standard pumps Dimensions, weights Wilo-CronoLine-IL Subject to change without prior notice /7 WILO AG / WILO AG Special features/product advantages
More informationMax. flow absorbed (l/mn) Torque (N.m/bar) R
M series motors Characteristics of the m series motors Motor model Displacement (cc/rev) Continuous max. speed (1) (rpm) Intermittent max. speed (1) (rpm) Max. flow absorbed (l/mn) Torque (N.m/bar) Torque
More informationSOURIAU Extends its High Density Offer with Size #26 Contact Technology
SOURIU xtends its Offer with Size #26 ontact Technology SOURIU brings to market a lightweight, robust and reliable 8ST High ensity solution from the smallest to the largest. reliable & robust solution
More informationStainless Steel Gas Springs
Stainless Steel Gas Springs Gas Springs in 4 (V2A) Stainless Steel As well as its very extensive range of standard adjustable force gas springs ACE can offer a wide range of stainless steel gas springs.
More informationFull Automatic Mounting Press
Full Automatic Mounting Press L1/L1-E3/L2/L2-E3 Dual cylinder High efficiency User-friendly Touch panel http://www.toptech.tw 0 Instruction Model type: L1 Operation video Top cover Quick release Thermostat
More informationFull Automatic Mounting Press
Full Automatic Mounting Press B/B-E3 One button start Perfect mounting Intuitive operation http://www.toptech.tw Instruction Operation video Top cover Quick release Indicator light LED display Mounting
More informationNM, NMS. Close Coupled Centrifugal Pumps with flanged connections. Construction. Applications. Operating conditions. Motor
lose oupled entrifugal Pumps The electropumps,, S, S series comply with the Regulation no. 7/ in force starting from.. European Materials omponents, S, S Pump casing ast iron ronze Lantern bracket asing
More informationLaparoscopic Reusable Trocars and Sleeves
High quality trocars and sleeves are essential during multi-puncture, minimally invasive surgical procedures. Our wide range of reusable trocars and sleeves are more economically beneficial and technologically
More informationPerfect sealing, a guarantee of economy
RCS Compressed air Perfect sealing, a guarantee of economy 1 2 3 he problem 15 to 30% of compressed air is lost by leakage between the compressor and the tool. he calculation A 1mm hole in your circuit
More informationE Series Back Pull Out End Scution. Centrifugal Pump DIN 24255
Back Pull Out End Scution Centrifugal Pump DIN 24255 MARKET SECTORS Buidling Services, RHVAC, Agriculture, Civil, Industries Back Pull Out End Suction Centrifugal Pump DIN 24255 MATERIAL OF CONSTRUCTION
More informationNESD / NESE. SINGLE-STAGE SELF-COOLED CENTRIFUGAL PUMPS TO STANDARD EN (NPE 44121) High-temperature water OPERATING LIMITS APPLICATIONS
OERATING LIMITS Flow up to: Head up to: 9 m CE Service pressure up to: up to bar* Temperature: min: C* / max: C* *: depending on model NESD / NESE SINGLE-STAGE SELF-COOLED CENTRIFUGAL UMS TO STANDARD EN
More informationPIPING, VALVES AND JOINTS
Piping and accessories... page 208-209 PVC Valves... page 210-213 Clamp saddle... page 213 Clapet Valve, Hose Holder Joints, Galvanised Collar... page 214 Compression connections... page 215 Pasting PVC
More informationSensyflow P. Thermal air-mass flowmeter for test rigs and quality assurance 10/ EN. Function and System Design
Sensyflow P Thermal air-mass flowmeter for test rigs and quality assurance 10/1-6.8 EN Direct mass flow measurement Wide measuring range (1:0) High measuring accuracy measuring deviation < 1 % of measured
More informationrecool for lathes Fast and easy retrofitting to internal cooling with oil and emulsion
recool for lathes Fast and easy retrofitting to internal cooling with oil and emulsion www.rego-fix.com External flood cooling Peripheral cooling Internal cooling The differences of wet and dry machining
More informationDAS Series Submersible Waste Water and Sewage Pumps
art DAS Series Submersible Waste Water and Sewage s ALICATIONS: ing of domestic and industrial sewage At sewage treatment plants ing of chemical and industrial waste water. ing of rain water All kinds
More informationRazor Blade 26D-28D Razor Blade 28C
Razor Blade 26D-28D Razor Blade 28C PARTS LIST KENT MODELS: 908 7099 020-908 7100 020 908 7101 020 2005-12 TABLE OF CONTENTS 2007-11 RAZOR BLADE 26D - 28D - 28C 1 DESCRIPTION PLAN GENERAL VIEW 2-3 TANKS
More informationALUMINIUM ROLLERS MADE IN ITALY
ALUMINIUM ROLLERS MADE IN ITALY Alveolar aluminium rollers, diameter 60mm to 250mm (natural or anodized). Roller manufacturing will be completely based on customer's drawings. The rollers can be supplied
More informationCAPILLARY DIAL THERMOMETERS TYPE TXC
CAPILLARY DIAL THERMOMETERS TYPE TXC TYPE DRAWING DIMENSIONS mm A TXCxxxXA B 38 37 45 45 55 C 13 13 13 13 13 B B 41 40 51 51 57 C 13 13 13 13 13 TXCxxxXB D 86 110 132 196 285 D B 33 29 31 32 45 C 13 13
More informationNovax. Axial flow fans Standard and hot smoke
Novax Axial flow fans Standard and hot smoke Product facts Product Axial flow fans with adjustable blades. ACN for duct installation ACW for heavy duty ACG free intake with connection to duct ACP free
More informationChemical Resistance Properties
Chemical Resistance Properties for Saint-Gobain Tubing (last updated May 2011) Support The ratings in these charts are based on the results of laboratory tests. They reflect the relative capabilities of
More informationNM, NMS. Close Coupled Centrifugal Pumps with flanged connections
lose oupled entrifugal Pups Materials oponents, S, S Pup casing ast iron ronze Lantern bracket asing cover for S GJL N Gu Sn N Lantern bracket S ast iron GJL N Ipeller ast iron ronze GJL N Gu Sn N rass
More informationRW-175 and RW-175-E SLEEVING
RW 3029/1 Revision 4 Page 1 of 6 Date Printed 17-Mar-14 Specification RW 3029/1 Revision 4 RW-175 and RW-175-E SLEEVING SCOPE This Quality Assurance Specification establishes the quality standard for a
More informationNM, NMD: Close Coupled Centrifugal Pumps with threaded ports
, D Construction Close-coupled, centrifugal pups; electric otor with extended shaft directly connected to the pup. : single-ipeller D: with two back-to-back ipellers (with axial thrust balancing). Connections:
More informationM-Series, Actuator Overview. Machine Screw Cutaway. UNI-LIFT Machine Screw Actuators offer precise. 12
M-, Actuator Overview UNI-LIFT Machine Screw Actuators offer precise positioning, uniform lifting speeds and capacity up to 250 tons. Standard model configurations include upright or inverted units with
More informationMEMORANDUM. Technical Committee on Liquefied Petroleum Gases. Subject: NFPA 58 Proposed Tentative Interim Amendment (TIA) No. 1153
National Fire Protection Association 1 Batterymarch Park, Quincy, MA 02169-7471 Phone: 617-770-3000 Fax: 617-770-0700 www.nfpa.org MEMORANDUM To: From: Technical Committee on Liquefied Petroleum Gases
More informationSALES & PURCHASE AGREEMENT SPOT/ CIF ROTTERDAM SPOT
SALES & PURCHASE AGREEMENT SPOT/ CIF ROTTERDAM SPOT For Russian Gasoil Diesel (D2) L-0.02-62, GOST 305-82 SELLER S TRANSACTION CODE: BUYERS S TRANSACTION CODE: 10 MILX12-040608 Sales and Purchase Agreement
More informationCABLE FIXING CLAMPS FOR HIGH VOLTAGE CABLE SYSTEMS
LE FIXING LPS FOR HIGH VOLTGE LE SYSTES P: 0 00 W: www.cablegrid.com.au ustralia Pty Ltd EELE able leats are available for trefoil and single cable applications where moderate to levels upto 0 k- sec/0k-
More informationOur most important values are, environmental consciousness, high quality of the products, top-notch energy-efficiency and low life-cycle cost.
PUMP CATALOGUE Kolmeks Ltd is a Finnish pump and electric motor manufacturer and part of the privately owned Brandt Group. It is one of the most successful companies in the pump business in Finland, operating
More informationMetal Bellows Couplings Servo-Insert Couplings Line Shafts
US 08 2009 Metal Bellows Couplings Servo-Insert Couplings Line Shafts Partner for performance www.gerwah.com A Global Presence For You The RINGFEDER POWER TRANSMISSION GMBH was founded in 1922 in Krefeld,
More informationPRODUCT BROCHURE FLUE GAS & VENTILATION SOLUTIONS
PRODUCT BROCHURE FLUE GAS & VENTILATION SOLUTIONS PRODUCT BROCHURE FLUE GAS & VENTILATION SOLUTIONS CONTENT FLUE GAS SYSTEMS Coaxline Concentric Flue System... 5 Benefits... 7 Coaxline Standard/Plus...
More informationBase for Stable Mounting an Eco Pedestal
Eco Air Meter Stand With Inspection Door Before you buy your stand, make sure to ask the seller about the main post if he s using a 1/8 solid metal post instead of a 1/16 thin metal. Eco Top Light Full
More informationMachine volt/hz Watt r.p.m. kg Plug R ref. ES / EU
ES EP EU STR: Single discs Machine volt/hz Watt r.p.m. kg Plug R ref. ES 330 ES 330 230/50 600 165 22 EU 611500 ES 420 ES 420 duo 230/50 1300/1600 140/280 48 EU 612400 ES 420 230/50 1200 175 40 EU 614205
More informationMAAG TM PPU gear unit for roller presses, horizontal mills and kilns
MAAG TM PPU gear unit for roller presses, horizontal mills and kilns 2 Our quality policy FLSmidth MAAG Gear is committed to creating long lasting relationships that establish us as a trustworthy, reliable
More informationTHE WORLD OF EXTRACTION PRICE LIST.
THE WORLD OF EXTRACTION PRICE LIST 2017 We look forward to receiving your order In the price list you will find the complete range of ESTA equipment and all available accessories with order number and
More informationK Series. Medium & High Density PCB Connectors
K Series Medium & High Density PC Connectors Hypertac Hyperboloid Technology Smiths Interconnect offers an extensive range of superior contact technologies suitable for standard and custom solutions. Hypertac
More informationTT SERIES OD ORBITAL CUTTING & BEVELING MACHINES 1/8 TO 168 OD 1/9
TT SERIES OD ORBITAL CUTTING & BEVELING MACHINES 1/8 TO 168 OD PRACTICAL TOOLS INC. P.O. Box 233 Aurora, ON L4G 3H3, Canada Phone: 905-727-0014 / 888-847-8880 Fax: 905-727-8483 info@practicaltoolsinc.com
More information38 Lucerna - LED 01E LED_AU_Lucerna.indd 38 27/12/16 10:39
38 Lucerna - LED Lucerna - LED Technical Specifications: Housing, lid, spokes, and connection for die-cast aluminium pressed poles. Diffuser: Tempered glass, 5 mm thick, withstands thermal shock and impacts.
More informationAir Grinders with Collets
Screwdriving technology Automation Air motors Air tools Air Grinders with Collets AngleHead Design Power Output: 130 W, 300 W, 700 W (.17 /.40 /.94 HP) highest power output at a low weight ergonomic highly
More informationNovenco Axial Flow Fans. Novax St andard and hot Smoke
Novenco Axial Flow Fans Novax St andard and hot Smoke Product facts Product Axial flow fans with adjustable blades. ACN for duct installation ACG free intake with connection to duct ACP free suction and
More informationHIGH PRESSURE + STAINLESS STEEL. Rotary Union Solutions HPS. Series FLOW PASSAGE OPTIONS
RESSURE + SAESS SEE Rotary Union Solutions S Series FW ASSAE S 1 3 4 6 8 12 16 Rotary Union Solutions S Contents About DS 3 What is a Rotary Union? 4 S Series verview 5 ow o rder 6 Specifi cations & perating
More informationSUBMERSIBLE PUMPS FOR WASTE WATER VORTEX IMPELLER
G BEBE WE WE EX EE ade in high quality engineering cast iron. ortex ipeller. he subersible pups are supplied coplete with threaded counterflanges, packings and stainless steel bolts. pplications - ewage
More informationACTUATEC CORPORATION
TUT OPOTION : No.41, u-huan 7 d, u-ku Ind. Park, u-ku Hsiang, Taipei Hsien, Taiwan. TL : 886-2-2299-1588 FX : 886-2-2299-3786 http://www.actuatec.com -Mail : sale@actuatec.com TUT OPOTION TUT OPOTION :
More informationFormal Interpretations/ Interprétation formelle
Formal Interpretations/ Interprétation formelle This section lists questions that individuals have submitted about a particular standard. Each question has been reviewed and answered by the appropriate
More informationCONNECTOR SERIES. Medium & High Density PCB Connectors
K CONNECTOR SERIES Medium & High Density PC Connectors Hyperboloid Technology Smiths Connectors offers an extensive range of superior contact technologies suitable for standard and custom solutions. Hypertac
More informationcentrotex / captex / mandotex
UK N-OV SYSTMS centrotex standard size M. Machine adapter with short taper / cylinder fit Short taper 2 V S V S J M J M Spindle nose U 2-6 2-8 P170 P220 Outer Ø 2 [mm] 73 g7 76 g7 85 g7 91 g7 101 g7 110
More informationPUMP. Type EVM APPLICATIONS MATERIALS TECHNICAL DATA. Washing system Water treatment plants Reverse Osmosis system Some chemical applications
PUMP Type APPLICATIONS Washing system Water treatment plants Reverse Osmosis system Some chemical applications Conditioning systems Heating systems Industrial boilers Pressure boosting for industrial systems
More informationExpansion Vessels & Separators
Expansion Vessels & Separators Winkelmann is one of the global leading original equipment manufacturers (OEM) for water storage tanks, expansion vessels, separators and manifolds. As part of the Winkelmann
More informationPPG Series High Precision Gearbox. Datasheet
PPG Series High Precision Gearbox Datasheet Version PPG-2014-01 http://www.primopal.com Description PrimoPal s PPG series High Precision Planetary Gearboxes are mainly used with kinds of servo motors and
More informationM40 Size 1.5/Size 1.5i Power Connectors
M40 Size 1.5/Size 1.5i Power Connectors Approvals Tested acc. to DIN EN 61984 UL/CSA metallic connectors Number of ways: Contact diameter: Nominal current (VDE) / 20 C: Nominal current (UL): Nominal current
More informationcrimp 68 N 113 N Mechanical endurance : 500 cycles (full mating-unmating)
pplications ormer connector for military applications. Now used in the fields of professional and general electronics. tandards I- 26482 eries 1 N 934-He 301 V 95328 95 0017 T1 list Q approved ( version)
More informationIn-line Air Filter. ZFC Series kpa to 1.0 MPa (20 C) Operating pressure range kpa
In-line Air Filter RoHS Positive pressure 1. MPa e.g.) Protection of solenoid valves - kpa to 1. MPa ( C) Operating pressure range Both positive pressure and vacuum pressure can be used with one unit!
More informationSMART MOTION C A T A L O G 2009:1
SMART MOTION C A T A L O G 2009:1 Which arm do you need? To ensure that the balancing arm you order meets your expectations it is important to consider the following aspects. 1. Which type? PARALLEL ARM
More informationPOLISHING MATERIALS. z Introduction 380. z Polishing wheels 380. z Finimaster wheels 384. z Felt discs 385. z Compound sponges 388.
378 z Introduction 380 z Polishing wheels 380 z Sisal 380 z Sewn 380 z Cotton 380 z Single 380 z Sewn 381 z Ventilated 381 z Flannel 382 z Sewn 382 z Ventilated 382 z Finimaster wheels 384 z Finimaster
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
More informationFleck Valve Timer & Replacement Parts On-Line Catalog
1437 Brewster Creek Blvd Bartlett, Illinois 60103 Phone: (630) 289-6400 Fax: (630) 289-6571 Email: midamerica@att.net Web: www.midamericawater.com Fleck Valve Timer & Replacement Parts On-Line Catalog
More informationRitmo meets all your welding needs in your jobsite
Ritmo meets all your welding needs in your jobsite A RITMO DVANTAGE RITMO WORLDWIDE Ritmo has professional distributors and resellers all over the world. Our staff is ready to assist you in English, Spanish,
More informationDISTRICT OF KITIMAT PURCHASING DEPARTMENT
DISTRICT OF KITIMAT PURCHASING DEPARTMENT 206 ENTERPRISE AVENUE, KITIMAT, B.C.,V8C 2C7 PH: (250) 632-8925 FAX: (250) 632-4650 INVITATION TO TENDER U ntil the time designated in the attached schedule as
More informationEfficient-Tec International LLC.
Efficient-Tec International LLC. Walkway Handrail Stairway Handrail Illuminated Handrail Wire Rope Infills Rod Infills Glass Infills Spiral Staircases Glass Canopies Efficient-Tec International LLC. This
More informationNor East. 2-1/2 6 Series 8100 Cage Valves. Figure 1 2-1/2 6 Valves
2-1/2 6 Series 8100 Cage Valves Figure 1 2-1/2 6 Valves SP-8100 Page 2 December 2010 2-1/2 6 Series 8100 Cage Valves Figure 2 Teflon V-Ring Packing December 2010 Page 3 SP-8100 2-1/2 6 8100 Series Single
More informationCOILS AND CONNECTORS FOR SERIES 70 AND NAMUR VALVES
COILS AND CONNECTORS FOR SERIES 70 AND NAMUR VALVES COILS SIDE 22 mm Voltage tolerance: -10% + 15% Degree of protection: IP65 DIN 40050 with connector Avoid prolonged exposure to atmospheric agents Coil
More informationRitmo meets all your welding needs in your jobsite
Ritmo meets all your welding needs in your jobsite A RITMO DVANTAGE RITMO WORLDWIDE Ritmo has professional distributors and resellers all over the world. Our staff is ready to assist you in English, Spanish,
More informationAndreani Tools List MTB
Andreani Tools List MTB Code Description Pompa spurgo (vacuum pump) 1001/SP2110 Vacuum pump SP2, 110 v. 1001/SP2220 Vacuum pump SP2, 220 v. 1001/SP4110 Vacuum pump SP4, 110 v. 1001/SP4220 Vacuum pump SP4,
More informationmineral leases have heretofore executed a "Unit Operating
IN THE STATE OIL AND GAS BOARD OF MISSISSIPPI DOCKET NO. 119-68-145 GLASSCOCK FIELD, ADAMS COUNTY, MISSISSIPPI. ORDER NO. 233-68 O R D E R This day this cause came on for hearing before the Mis sissippi
More informationB-Series Section Overview. Ball Screw Cutaway. UNI-LIFT Ball Screw Actuators provide high. 34
B- Section Overview UNI-LIFT Actuators provide high efficiency and high speed in a linear positioning package up to 100 tons. The low friction ball screw and nut design provides longer life at load and
More informationAn Urgent Bulletin from CSA Group
An Urgent Bulletin from CSA Group Gas Products No. 406 Effective Date: August 17, 2018 Date: February 13, 2017 Apply Before March 16, 2018 Announcing: Publication of CSA/ANSI NGV 2-2016 Compressed natural
More informationSupplement price list
Supplement price list EN - - 04/2017 FST GmbH Filtrations-Separations-Technik Sales office: Im Teelbruch 106-45219 Essen - Germany Head office / Production / Logistics: Weiherdamm 17-57250 Netphen-Deuz
More informationPAS. Heavy Duty Pressure Transmitter
Heavy Duty Pressure Transmitter measuring monitoring analyzing PAS Span: -14.7 21 PSIG up to 0 8700 PSIG t max : 248 F Process Connection: ½" NPT, ¼" NPT, or Various Diaphragm Seals on Request Material:
More information158 Rubber-bonded grinding tools. 86 Compounds and fluids. 174 Grinding and polishing stones. 106 Felts and cloths. 214 Ceramic-fibre tools
. Grinding and polishing tools 86 Compounds and fluids 158 Rubber-bonded grinding tools 174 Grinding and polishing stones 106 Felts and cloths 14 Ceramic-fibre tools 116 Lapping tools 130 Polishing brushes
More informationOther variations which are not mentioned in this document are on demand (if possible).
GENERAL INFORMATION This specification document is for gas-filled thermometers manufactured by: STIKO, Industrieweg 5, 9301 LM Roden, The Netherlands. STIKO is a manufacturer of mechanical instruments
More informationHF04-50 Powder Hopper
En Spare parts list HF04-50 Powder Hopper Translation of the original operating instructions Documentation HF04-50 Copyright 2006 Gema Switzerland GmbH All rights reserved. This publication is protected
More informationROUNDO Section Bending Machines Type R-1 through R-21-S
ROUNDO Section Bending Machines Type R-1 through R-21-S Friläggas 1 Roundo Section Bending Machines - Largest selection on the market ROUNDO is the worlds leading manufacturer of plate and section bending
More information1.0 Tender Submission :
GWALIOR SAHAKARI DUGDHA SANGH MARYADIT, GWALIOR GOLA KA MANDIR,GWALIOR SCHEDULE I Ref : GSDS/IM/Packing Material/2017-18 (13 th Call) The Gwalior Sahakari Dugdha Sangh Maryadit, Gwalior invites sealed
More informationSPEEA. for. Open Positions: President Treasurer Secretary CONTENTS
SPEEA EXECUTIVE BOARD ELECTION INFORMATION & PETITION for 2018 EXECUTIVE BOARD CANDIDATES Open Positions: President Treasurer Secretary CONTENTS Dates to Remember If you have questions Eligibility Requirements
More informationISO TC 130 US TAG ISO TC 130
ISO TC 130 AND US TAG TO ISO TC 130 ISO TC 130 and US TAG to ISO TC 130 Background The International Organization for Standardization Technical Committee 130, Graphic Technology (ISO TC 130), is the international
More informationFormal Interpretations/ Interprétation formelle
Formal Interpretations/ Interprétation formelle This section lists questions that individuals have submitted about a particular standard. Each question has been reviewed and answered by the appropriate
More informationDIMENSIONS...R20 Series MOUNTING AND SHAFT OPTIONS CONNECTORS SIDE VIEW ENGLISH (INCHES) METRIC (MILLIMETERS) REAR MOUNTED MS CONNECTOR OPTION
DIMENSIONS...R20 Series SIDE VIEW AND THERMISTOR (FLYING LEADS AL) (3.11) (79) SECONDARY 2.28 MAX. 57,9 MAX. 18.0 MIN. 457,2 MIN. REF. R21 6.38 (4.93) R22 7.38 (5.93) R23 8.38 (6.93) R24 9.38 (7.93) REF.
More informationwafer level chip-scale package, 6 bumps SOT1454 Footprint dimensions (mm) 0.65 x 0.44 Footprint area (mm²) 0.29
18 October 2018 Package information 1. Package summary Terminal position code Package type descriptive code Package type industry code Package style descriptive code Package body material type Mounting
More informationTerminal Blocks. DINA Series. AB Type Block. AC Type Block. AD Type Block. 46mm fixings to accompany Terminal Heads with this keycode.
DIN Series Type lock mm mm fixings to accompany Terminal Heads with this keycode. PC % lo.00.0 PC % lo.0. 7..... 7. CTCLP Clips for assemling ceramic tues to locks availale 0.0 0. PC. Ø. PC.. Ø C Type
More informationB (bottom) Package type descriptive code. LFBGA624 Package type industry code. LFBGA624 Package style descriptive code
LFBGA624, plastic, low profile finepitch ball grid array; 624 bumps; 0.8 pitch; 21 x 21 x 1.6 body 24 January 2019 1 Package information Package suary Terminal position code B (bottom) Package type descriptive
More informationPHASED OUT. LED light engine / OLED LED linear / area. Module CLE Shallow G1 ADV Modules CLE
Product description For round and and ultra flat, wall-mounted, ceiling-mounted and suspended luminaries Backlighting depth of 3 mm can be realized Wide beam chip enables high homogeneity despite low backlighting
More informationFaymonville Mega- Z- 4H- V- AT- A (2.74) Details. Mega-Z-4H-V-AT-A (2.74)
Faymonville Mega- Z- 4H- V- AT- A45-7.50(2.74)- 19.5-2.74 Details ID. Number FA.2759 Manufacturer Faymonville Type Mega-Z-4H-V-AT-A45-7.50(2.74)-19.5-2.74 Price On request Year New Axles 4 Speed Speed
More information2015 SOM Ballot Number 1. No/No Vote. Sponsored by Technical Section 3a
2015 SOM Ballot Number 1 Sponsored by Technical Section 3a 1 2 3 4 5 6 7 8 9 10 11 Concurrent ballot item to revise M 240 to remove MBI and TOC requirements. See page 3, 37 & 39-44. 44 2/6 Concurrent ballot
More informationSPARES KF7 KFGL35. In addition all of these couplings can be supplied and fitted with:-
PRESSED STEEL DELTA Type Capacity (kg) Part Number* Centres (mm) KF7,5 375-750 KPB7AOD 110/120 KF13 750-1300 KPB13AOD 110/120 KF17 1100-1700 KPB17AOD 110/120 KF20 1100-2000 KPB20AOD 110/120 KF27 1400-2700
More informationMIG/MAG Welding Torch MB 401 D / MB 501 D. liquid-cooled. ABICOR BINZEL. The right welding torch for every job!
MIG/MAG Welding Torch MB 401 D / MB 501 D liquid-cooled C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M ABICOR BINZEL. The right welding torch for every job! BINZEL liquid cooled welding torches incorporate
More informationRef No: N Date: May 25, 2005
Ref No: N05-045 Date: May 25, 2005 GAS PRODUCTS NO. 64 Effective Date: May 1, 2006 Call us today! We can help you stay on top of changes that will affect your Certification! 1-866-797-4272 Announcing:
More informationDownlights. The right solution for a wide variety in applications
Downlights The right solution for a wide variety in applications 26 Reflector Downlights REFLECTOR DOWN LIGHT ECO Dimmable: Optional Driver: Class A driver Eaglerise included (non-dimmable) Beam: 50 UGR:
More informationSteel Pipes. Plastic Pipes. Seamless Pipes
Steel Pipes Plastic Pipes Seamless Pipes We, Hatboru Sanayi ve Ticaret A.S., are pleased to introduce ourselves as one of the leading producer and exporter for spiral submerged arc welded steel pipes (SSAW)
More informationAny person violating any provisions of such code shall be punished as provided in section of this code. (Ord. 1004)
ARTICLE 4. PLUMBING CODE 4-401. A) UNIFORM PLUMBING CODE INCORPORATED. There is hereby adopted and incorporated by reference, for the purpose of establishing rules and regulations for the practice of plumbing
More informationVersatile Linear Systems
Versatile Linear Systems Q2-19 Contents 06 elcome 07 Pendants 04 Province Lighting Contents Versatile Linear Systems Versatile Linear Systems Province Lighting 05 elcome 06 Our range of linear lighting
More informationThe creation of Danish Design watches goes back to 1988 when the demand of modern designs was high but the
WATCH CATALOGUE SPRING / SUMMER 2016 The creation of Danish Design watches goes back to 1988 when the demand of modern designs was high but the offer in design watches was very low. Although nowadays the
More informationConcentric butterfly valves, wafer, lugged and flanged
Concentric butterfly valves, wafer, lugged and flanged Table of contents Introduction Technimex is an international supplier of products needed for urban infrastructure such as water-, sewage-, and gas
More informationRegulations of the 24 hours International Event /8 scale onroad track race Classique de Châteauroux
Châteauroux, 30nd November 2018 Regulations of the 24 hours International Event 2019 1/8 scale onroad track race Classique de Châteauroux The 11 th edition of the 24 Hours International on road pan cars
More informationKIT COLLEGAMENTO. KIT RACCORDI E TUBAZIONI / FITTINGS AND PIPEs KIT COMPOSIZIONE DEL KIT N 1 COMPOSIZIONE OPTIONAL KIT 1 COMPOSIZIONE DEL KIT N 2
KIT RACCORDI E TUBAZIONI / FITTINGS AND PIPEs KIT 00000 0000 0000 000 00006 00007 00008 000 KIT filtro 00 impianto fino a 9 m /h KIT 00 filter system up to 9 m / h KIT filtro 60 impianto fino a 6 m /h
More informationDECLARATION OF PERFORMANCE
EN DECLARATION OF PERFORMANCE according to Annex III of the Regulation (EU) Nr. 305/2011 (Construction Products Regulation) Hilti Firestop Wrap CFS-W P No. Hilti CFS-W P 1. Unique identification code of
More informationCEF POLYMERES. Spring. CEF POLYMERES sa.com DT.STRA.E l Fv F1 F. Strocke (S)
Spring S Sv S 0 Sv Série 0R 5R R 6 R 700R CR 0 R 4 M M 167 M Strocke Max. 35% % % 25% % U90 % 9 UR % l S Creep value compression max 4 6% 3 5% 5 7% 7 9% 8 % 5 6% 6 8% l Fv F1 F Strocke (S) The value on
More informationUncertainty in Measurements
Uncertainty in Measurements Ø A measurement is a number with a unit attached. Ø It is not possible to make exact measurements, and all measurements have uncertainty. Ø We will generally use metric system
More information