Test Report. File No.: SHV11085/16-01 Test Report No.:

Transcription

1

2 File No.: SHV11085/16-01 No.: Applicant... : Manufacturer... : Order No.... : Sunrise Solartech Co., Ltd. No.20 Tongzi River West Road, Zhonglou Development Zone Changzhou, Jiangsu , P.R. China Sunrise Solartech Co., Ltd. No.20 Tongzi River West Road, Zhonglou Development Zone Changzhou, Jiangsu , P.R. China QT- SHV11085/16 Date of Application... : 12/02/2016 Product... : Module type(s)... : Crystalline Silicon Photovoltaic Modules PV module with 6 Mono-crystalline Solar Cell: 72 cells: SR-M672xxx (xxx= in steps of 5) 72 cells: SR-M672xxx-B (xxx= in steps of 5) 60 cells: SR-M660xxx (xxx= in steps of 5) 60 cells: SR-M660xxx-B (xxx= in steps of 5) 54 cells: SR-M654xxx (xxx= in steps of 5) 54 cells: SR-M654xxx-B (xxx= in steps of 5) 48 cells: SR-M648xxx (xxx= in steps of 5) 48 cells: SR-M648xxx-B (xxx= in steps of 5) PV module with 5 Mono-crystalline Solar Cell: 72 cells: SR-M572*** (***= in steps of 5) 72 cells: SR-M572***B (***= in steps of 5) 72 cells: SR-M572***-1 (*** = in steps of 5) B means with black backsheet. General Information Maximum System Voltage... : Application Class... : Electrical Protection Class... : Fire Safety Class... : Type of examination... : DC 1000V Class A Class II Class C Conformity testing with TÜV mark Testing Period... : 01/06/ /27/2017 Testing Laboratory... : National Center of Supervision & Inspection on Solar Photovoltaic Products Quality Suite A-10F, No. 5 Xinhua Road, Wuxi New District Wuxi City, Jiangsu Province, , P.R. China Test results listed in this test report refer exclusively to the mentioned test sample. Partly copying is not permitted without explicit agreement of the owner. The submitted test samples as described in the reports hereunder are in compliance with the requirements: IEC / EN 61215:2005 Crystalline Silicon Terrestrial Photovoltaic (PV) Modules - Design Qualification and Type Approval IEC :2004+A1:2011+A2:2013 / EN :2007+A1:2012+A2:2013 Photovoltaic (PV) module safety qualification. Part 1: Requirements for construction IEC :2004+A1:2011 / EN :2007+A1:2012 Photovoltaic (PV) module safety qualification. Part 2: Requirements for testing PV-F-009 TRF Page 2 of 45 Version 1.5

3 File No.: SHV11085/16-01 No.: List of contents List of contents... 3 History of certification... 4 Summary of testing General remarks General product information Module type: SR-M Testing procedure Module type: SR-M Module group assignment Module type: SR-M Test result overview Module type: SR-M Test results of IEC / EN Module type: SR-M Visual inspection (initial) Maximum power determination (initial) Insulation test (initial) Wet leakage current test (Initial) A Performance at STC B Bypass diode thermal test B Hot-spot endurance test F Maximum power determination (final) F Wet leakage current test (final) Test results of IEC / EN Test results of IEC / EN Module type: SR-M MST26 Reverse current overload test MST17 Wet leakage current test Annex 1: Constructional Data Form (CDF) Annex 2: List of measurement equipment Annex 3: Statement of the estimated uncertainty of the test results Annex 4: Photos Module type: SR-M PV-F-009 TRF Page 3 of 45 Version 1.5

4 File No.: SHV11085/16-01 No.: History of certification File no.... : SHV04021/13 Certificate no... : , Date of issue... : 06/05/2013 Report no.... : Module type(s). : Description:... : PV module with 6 Mono-crystalline Solar Cell: 72 cells: SR-M672xxx (xxx= in steps of 5) 72 cells: SR-M672xxx-B (xxx= in steps of 5) 60 cells: SR-M660xxx (xxx= in steps of 5) 60 cells: SR-M660xxx-B (xxx= in steps of 5) 54 cells: SR-M654xxx (xxx= in steps of 5) 54 cells: SR-M654xxx-B (xxx= in steps of 5) 48 cells: SR-M648xxx (xxx= in steps of 5) 48 cells: SR-M648xxx-B (xxx= in steps of 5) PV module with 5 Mono-crystalline Solar Cell: 72 cells: SR-M572*** (***= in steps of 5) 72 cells: SR-M572***B (***= in steps of 5) 72 cells: SR-M572***-1 (*** = in steps of 5) PV module with 6 Poly-crystalline Solar Cell: 72 cells: SR-P672xxx (xxx= in steps of 5) 72 cells: SR-P672xxx-B (xxx= in steps of 5) 66 cells: SR-P666xxx (xxx= in steps of 5) 66 cells: SR-P666xxx-B (xxx= in steps of 5) 60 cells: SR-P660xxx (xxx= in steps of 5) 60 cells: SR-P660xxx-B (xxx= in steps of 5) 54 cells: SR-P654xxx (xxx= in steps of 5) 54 cells: SR-P654xxx-B (xxx= in steps of 5) 48 cells: SR-P648xxx (xxx= in steps of 5) 48 cells: SR-P648xxx-B (xxx= in steps of 5) B means with black backsheet. Add fire test for 6 sets of raw materials combination File no.... : Certificate no... : Date of issue... : SHV04021/13-02 N/A N/A Report no.... : Module type(s). : Description:... : Same as above Test report verification File no.... : SHV11039/13 Certificate no... : , PV-F-009 TRF Page 4 of 45 Version 1.5

5 File No.: SHV11085/16-01 No.: Date of issue... : 12/11/2013 Report no.... : Module type(s). : Description:... : PV module with 6 Mono-crystalline Solar Cell: 72 cells: SR-M672xxx (xxx= in steps of 5) 72 cells: SR-M672xxx-B (xxx= in steps of 5) 60 cells: SR-M660xxx (xxx= in steps of 5) 60 cells: SR-M660xxx-B (xxx= in steps of 5) 54 cells: SR-M654xxx (xxx= in steps of 5) 54 cells: SR-M654xxx-B (xxx= in steps of 5) 48 cells: SR-M648xxx (xxx= in steps of 5) 48 cells: SR-M648xxx-B (xxx= in steps of 5) PV module with 5 Mono-crystalline Solar Cell: 72 cells: SR-M572*** (***= in steps of 5) 72 cells: SR-M572***B (***= in steps of 5) 72 cells: SR-M572***-1 (*** = in steps of 5) PV module with 6 Poly-crystalline Solar Cell: 72 cells: SR-P672xxx (xxx= in steps of 5) 72 cells: SR-P672xxx-B (xxx= in steps of 5) 66 cells: SR-P666xxx (xxx= in steps of 5) 66 cells: SR-P666xxx-B (xxx= in steps of 5) 60 cells: SR-P660xxx (xxx= in steps of 5) 60 cells: SR-P660xxx-B (xxx= in steps of 5) 54 cells: SR-P654xxx (xxx= in steps of 5) 54 cells: SR-P654xxx-B (xxx= in steps of 5) 48 cells: SR-P648xxx (xxx= in steps of 5) 48 cells: SR-P648xxx-B (xxx= in steps of 5) B means with black backsheet. Add some raw materials based on TÜV Rheinland test report and change manufacturing plant address as well File no.... : SHV03031/15 Certificate no... : , Date of issue... : 04/15/2015 Report no.... : Module type(s). : PV module with 6 Mono-crystalline Solar Cell: 72 cells: SR-M672xxx (xxx= in steps of 5) 72 cells: SR-M672xxx-B (xxx= in steps of 5) 60 cells: SR-M660xxx (xxx= in steps of 5) 60 cells: SR-M660xxx-B (xxx= in steps of 5) 54 cells: SR-M654xxx (xxx= in steps of 5) 54 cells: SR-M654xxx-B (xxx= in steps of 5) 48 cells: SR-M648xxx (xxx= in steps of 5) 48 cells: SR-M648xxx-B (xxx= in steps of 5) PV-F-009 TRF Page 5 of 45 Version 1.5

6 File No.: SHV11085/16-01 No.: PV module with 5 Mono-crystalline Solar Cell: 72 cells: SR-M572*** (***= in steps of 5) 72 cells: SR-M572***B (***= in steps of 5) 72 cells: SR-M572***-1 (*** = in steps of 5) PV module with 6 Poly-crystalline Solar Cell: 72 cells: SR-P672xxx (xxx= in steps of 5) 72 cells: SR-P672xxx-B (xxx= in steps of 5) 66 cells: SR-P666xxx (xxx= in steps of 5) 66 cells: SR-P666xxx-B (xxx= in steps of 5) 60 cells: SR-P660xxx (xxx= in steps of 5) 60 cells: SR-P660xxx-B (xxx= in steps of 5) 54 cells: SR-P654xxx (xxx= in steps of 5) 54 cells: SR-P654xxx-B (xxx= in steps of 5) 48 cells: SR-P648xxx (xxx= in steps of 5) 48 cells: SR-P648xxx-B (xxx= in steps of 5) B means with black backsheet. Description:... : Add some raw materials based on TÜV Rheinland test report. File no.... : SHV07014/15-01 Certificate no... : , Date of issue... : 09/18/2015 Report no.... : Module type(s). : Description:... : PV module with 6 Mono-crystalline Solar Cell: 72 cells: SR-M672xxx (xxx= in steps of 5) 72 cells: SR-M672xxx-B (xxx= in steps of 5) 60 cells: SR-M660xxx (xxx= in steps of 5) 60 cells: SR-M660xxx-B (xxx= in steps of 5) 54 cells: SR-M654xxx (xxx= in steps of 5) 54 cells: SR-M654xxx-B (xxx= in steps of 5) 48 cells: SR-M648xxx (xxx= in steps of 5) 48 cells: SR-M648xxx-B (xxx= in steps of 5) PV module with 5 Mono-crystalline Solar Cell: 72 cells: SR-M572*** (***= in steps of 5) 72 cells: SR-M572***B (***= in steps of 5) 72 cells: SR-M572***-1 (*** = in steps of 5) PV module with 6 Poly-crystalline Solar Cell: 60 cells: SR-P660xxx (xxx= in steps of 5) 60 cells: SR-P660xxx-B (xxx= in steps of 5) 54 cells: SR-P654xxx (xxx= in steps of 5) 54 cells: SR-P654xxx-B (xxx= in steps of 5) 48 cells: SR-P648xxx (xxx= in steps of 5) 48 cells: SR-P648xxx-B (xxx= in steps of 5) Add new frame and add new module types based on TÜV Rheinland test report. PV-F-009 TRF Page 6 of 45 Version 1.5

7 File No.: SHV11085/16-01 No.: File no.... : SHV08044/15 Certificate no... : , Date of issue... : 11/18/2015 Report no.... : Module type(s). : Description:... : PV module with 6 Mono-crystalline Solar Cell: 72 cells: SR-M672xxx (xxx= in steps of 5) 72 cells: SR-M672xxx-B (xxx= in steps of 5) 60 cells: SR-M660xxx (xxx= in steps of 5) 60 cells: SR-M660xxx-B (xxx= in steps of 5) 54 cells: SR-M654xxx (xxx= in steps of 5) 54 cells: SR-M654xxx-B (xxx= in steps of 5) 48 cells: SR-M648xxx (xxx= in steps of 5) 48 cells: SR-M648xxx-B (xxx= in steps of 5) PV module with 5 Mono-crystalline Solar Cell: 72 cells: SR-M572*** (***= in steps of 5) 72 cells: SR-M572***B (***= in steps of 5) 72 cells: SR-M572***-1 (*** = in steps of 5) PV module with 6 Poly-crystalline Solar Cell: 60 cells: SR-P660xxx (xxx= in steps of 5) 60 cells: SR-P660xxx-B (xxx= in steps of 5) 54 cells: SR-P654xxx (xxx= in steps of 5) 54 cells: SR-P654xxx-B (xxx= in steps of 5) 48 cells: SR-P648xxx (xxx= in steps of 5) 48 cells: SR-P648xxx-B (xxx= in steps of 5) Add new frame and increase the fuse rating File no.... : Certificate no... : SHV09028/15 Declaration Date of issue... : 12/21/2015 Report no.... : Module type(s). : Description:... : PV module with 6 Poly-crystalline Solar Cell: 60 cells: SR-P660xxx (xxx= in steps of 5) 60 cells: SR-P660xxx-B (xxx= in steps of 5) 54 cells: SR-P654xxx (xxx= in steps of 5) 54 cells: SR-P654xxx-B (xxx= in steps of 5) 48 cells: SR-P648xxx (xxx= in steps of 5) 48 cells: SR-P648xxx-B (xxx= in steps of 5) Extend the 4 bus bars poly solar cell File no.... : Certificate no... : SHV12036/15 Declaration Date of issue... : 03/29/2016 PV-F-009 TRF Page 7 of 45 Version 1.5

8 File No.: SHV11085/16-01 No.: Report no.... : Module type(s). : Description:... : PV module with 6 Poly-crystalline Solar Cell: 72 cells: SR-P672xxx (xxx= in steps of 5) 72 cells: SR-P672xxx-B (xxx= in steps of 5) 66 cells: SR-P666xxx (xxx= in steps of 5) 66 cells: SR-P666xxx-B (xxx= in steps of 5) B means with black backsheet. Extend the frame for poly modules File no.... : SHV03048/16 Certificate no... : Date of issue... : 07/15/2016 Report no.... : Module type(s). : Description:... : PV module with 6 Poly-crystalline Solar Cell: 72 cells: SR-P672xxx (xxx= in steps of 5) 72 cells: SR-P672xxx-B (xxx= in steps of 5) 66 cells: SR-P666xxx (xxx= in steps of 5) 66 cells: SR-P666xxx-B (xxx= in steps of 5) 60 cells: SR-P660xxx (xxx= in steps of 5) 60 cells: SR-P660xxx-B (xxx= in steps of 5) 54 cells: SR-P654xxx (xxx= in steps of 5) 54 cells: SR-P654xxx-B (xxx= in steps of 5) 48 cells: SR-P648xxx (xxx= in steps of 5) 48 cells: SR-P648xxx-B (xxx= in steps of 5) B means with black backsheet. Extend the power range File no.... : Certificate no... : SHV12036/15-02 Declaration Date of issue... : 07/20/2016 Report no.... : Module type(s). : Description:... : PV module with 6 Mono-crystalline Solar Cell: 72 cells: SR-M672xxx (xxx= in steps of 5) 72 cells: SR-M672xxx-B (xxx= in steps of 5) 60 cells: SR-M660xxx (xxx= in steps of 5) 60 cells: SR-M660xxx-B (xxx= in steps of 5) 54 cells: SR-M654xxx (xxx= in steps of 5) 54 cells: SR-M654xxx-B (xxx= in steps of 5) 48 cells: SR-M648xxx (xxx= in steps of 5) 48 cells: SR-M648xxx-B (xxx= in steps of 5) B means with black backsheet. Extend raw materials PV-F-009 TRF Page 8 of 45 Version 1.5

9 File No.: SHV11085/16-01 No.: Supplementary information: N/A PV-F-009 TRF Page 9 of 45 Version 1.5

10 File No.: SHV11085/16-01 No.: Summary of testing According to the enquiry of the applicant, based on certificate no , extend to higher power for 6 mono PV modules: PV module with 6 Mono-crystalline Solar Cell: 72 cells: SR-M672xxx (xxx= in steps of 5) 72 cells: SR-M672xxx-B (xxx= in steps of 5) 60 cells: SR-M660xxx (xxx= in steps of 5) 60 cells: SR-M660xxx-B (xxx= in steps of 5) 54 cells: SR-M654xxx (xxx= in steps of 5) 54 cells: SR-M654xxx-B (xxx= in steps of 5) 48 cells: SR-M648xxx (xxx= in steps of 5) 48 cells: SR-M648xxx-B (xxx= in steps of 5) Module type SR-M was selected as representative test samples and conducted with all the related tests. All tests were successfully completed. The factory inspection was performed periodically. Therefore, from the result of testing, it is recommended that the mono certification should be granted. Detailed product information are to be found in the CDF (constructional data form) in Annex 1 of this report. PV-F-009 TRF Page 10 of 45 Version 1.5

11 File No.: SHV11085/16-01 No.: General remarks Test item particulars: Accessories and detachable parts included in the evaluation... : Options included... : Abbreviations used in the report: HF - Humidity Freeze DH - Damp Heat Impp - Maximum power current Isc - Short circuit current Pmpp - Maximum power NOCT - Nominal Operating Cell Temperature STC - Standard Test Conditions CTI - Comparative Tracking Index Possible test case verdicts: Test case does not apply to the test object... : Test object does meet the requirement... : Test object does not meet the requirement... : Other remarks: N/A N/A TC - Temperature Cycling Vmpp - Maximum power voltage Voc - Open circuit voltage FF - Fill factor α - Current temperature coefficient β - Voltage temperature coefficient γ - power temperature coefficient PD - Partial Discharge Not Applicable (N/A) Pass (P) Fail (F) The test verdicts presented in this report relate only to the object tested. This report shall not be reproduced, except in full, with the written approval of the issuing testing laboratory. (see Annex #) refers to additional information appended to the report. (see Table #) refers to a table appended to the report. Throughout this report, a point is used as the decimal separator. PV-F-009 TRF Page 11 of 45 Version 1.5

12 File No.: SHV11085/16-01 No.: General product information Module type: SR-M Product Electrical Ratings at STC: Nominal maximum power (Pmax) [W]...: 350 Nominal open circuit voltage at (Voc) [V]...: Nominal maximum power voltage (Vmpp) [V]...: Nominal short circuit current at (Isc) [A]...: 9.63 Nominal maximum power current (Impp) [A]...: 9.09 Product Safety Ratings: Maximum system voltage [V]...: 1000 Fuse rating [A]...: 15 Application class...: Safety class in accordance with IEC : Fire safety class...: Recommended maximum series module configurations..: Recommended maximum parallel module configurations : Class A Class II Class C Written in installation manual Written in installation manual PV-F-009 TRF Page 12 of 45 Version 1.5

13 File No.: SHV11085/16-01 No.: Testing procedure Module type: SR-M Random sampling from production Prototype submitted by client New module type Modifications (if yes, please choose the applicable modification according to the Retesting Guideline) Change in cell technology Modification to encapsulation system Modification to superstrate Increase in module size Modification to backsheet/ substrate Modification to frame and/ or mounting structure Modification to junction box/ electrical termination Change in cell interconnect materials or technique Change in electrical circuit of an identical package Higher or lower power output (by 10%) in the identical package including size and using the identical cell process Qualification of a frameless module after the design has received certification as a framed module Others Change in bypass diode or number of diodes Others Description of similarity (differences) between the applied model and the previously tested model: - Extend to higher power output for 6 mono PV modules PV-F-009 TRF Page 13 of 45 Version 1.5

14 File No.: SHV11085/16-01 No.: TEST SEQUENCE Components Modules Module Module H F G Preconditioning MST 15 Partial Discharge Test MST 33 Conduit Bending Test MST 44 Terminal Box Knock Out Test 10.1/MST 01 Visual Inspection 10.1/MST 01 Visual Inspection 10.1/MST 01 Visual Inspection 10.2 Max. Power Determination MST 32 Module Breakage Test MST 23 Fire Test 10.3/MST 16 Insulation Test / Dielectric Withstand Test 10.15/MST 17 Wet Leakage Current Test A B1 B2 B3 C1 C2 D1 D2 E1 E Measurement of Temperature Coefficients MST 21 Temperature Test MST 13 Ground Continuity Test MST 13 Ground Continuity Test MST 13 Ground Continuity Test MST 13 Ground Continuity Test 10.6 Performance at STC and NOCT MST 26 Reverse Current Overload Test MST 11 Accessibility Test MST 11 Accessibility Test MST 11 Accessibility Test MST 11 Accessibility Test 10.7 Performance at Low Irradiance 10.5 Measurement of NOCT 10.18/MST 25 Bypass Diode Test 10.10/MST 54 UV Precondition Test D /MST 51a Thermal Cycling Test 200 Cycles E /MST 53 Damp Heat Test 10.8 Outdoor Exposure Test 10.9/MST 22 Hot-spot Endurance Test 10.11/MST 51b Thermal Cycling Test 50 Cycles MST 12 Cut Susceptibility Test 10.16/MST 34 Mechanical Load Test MST 12 Cut Susceptibility Test 10.12/MST 52 Humidity-freeze Test 10 cycles C2 MST 13 Ground Continuity Test MST 12 Cut Susceptibility Test MST 13 Ground Continuity Test Robustness of Terminations Test MST 11 Accessibility Test D1 MST 13 Ground Continuity Test MST 11 Accessibility Test MST 12 Cut Susceptibility Test MST14 Impulse Voltage Test ` MST 11 Accessibility Test E1 MST 13 Ground Continuity Test ` Hail Impact Tests MST 11 Accessibility Test ` 10.15/MST 17 Wet Leakage Current Test PV-F-009 TRF Page 14 of 45 Version 1.5

15 File No.: SHV11085/16-01 No.: Module group assignment Module type: SR-M Sample # Group ID Serial number Dimension (l x w x h) [mm] Remark 1 A S6M RBB x 992 x 40 REF 2 B3 S6M RBB x 992 x 40 BD,HS 3 B2 S6M RBB x 992 x 40 RC PV-F-009 TRF Page 15 of 45 Version 1.5

16 File No.: SHV11085/16-01 No.: Clause Requirement + Test Result - Remark Verdict Test result overview 4 Marking - P - Name, monogram or symbol of manufacturer... : Written on the nameplate - Type or model number... : Written on the nameplate P - Serial number... : Stuck on the string connectors - Polarity of terminals or leads... : Polarised by color P - Maximum system voltage... : 1000VDC P - The date and place of manufacture... : Traceable from serial number P P P - Initial examination All modules P 10 Preconditioning... : Performed by manufacturer N/A 10.1 / MST 01 Visual inspection... : See table 10.1 P 10.2 Maximum power determination... : See table 10.2 P 10.3 / MST 16 Insulation test / Dielectric withstand test... : See table 10.3 P / MST 17 Wet leakage current test... : See table P Module type: SR-M Group A 1 Module See Group ID A P 10.4 Measurement of temperature coefficients... : N/A N/A 10.6 Performance at STC and NOCT... : See table 10.6A Performance at low irradiance... : N/A N/A Group B2 1 Module Sample Group ID B2 P MST 21 Temperature test... : N/A N/A MST 26 Reverse current overload test... : See table MST26 P Group B3 1 Module Sample Group ID B3 P MST 13 Ground continuity test... : N/A N/A MST 11 Accessibility test... : N/A N/A / MST 25 Bypass diode thermal test... : N/A N/A 10.9 / MST 22 Hot spot endurance test... : See table 10.9B P MST 12 Cut susceptibility test : N/A N/A - Final measurements All modules P / MST 17 Wet leakage current test... : See table 10.15F P PV-F-009 TRF Page 16 of 45 Version 1.5

17 File No.: SHV11085/16-01 No.: IEC / EN Clause Requirement + Test Result - Remark Verdict Test results of IEC / EN Module type: SR-M Visual inspection (initial) - Test date [MM/DD/YYYY]... : 01/06/ Sample # Nature and position of initial findings comments or attach photos - 1 No visual defects P 2 No visual defects P 3 No visual defects P Supplementary information: N/A - PV-F-009 TRF Page 17 of 45 Version 1.5

18 File No.: SHV11085/16-01 No.: IEC / EN Clause Requirement + Test Result - Remark Verdict 10.2 Maximum power determination (initial) - Test date [MM/DD/YYYY]... : 01/06/ Module temperature [ C]... : Corrected to 25 - Irradiance [W/m 2 ]... : Corrected to Sample # Voc [V] Vmpp [V] Isc [A] Impp [A] Pmpp [W] FF [%] Supplementary information: N/A - PV-F-009 TRF Page 18 of 45 Version 1.5

19 File No.: SHV11085/16-01 No.: IEC / EN Clause Requirement + Test Result - Remark Verdict 10.3 Insulation test (initial) Test date [MM/DD/YYYY]... : 01/06/ Test voltage applied [V]... : 2 minutes of 1000 and 1 minute of Sample # Required [MΩ] Measured [MΩ] Dielectric breakdown? >1000 No P >1000 No P >1000 No P Supplementary information: Minimum requirement according to the standard is 40MΩ m 2. Area of is 1.94m PV-F-009 TRF Page 19 of 45 Version 1.5

20 File No.: SHV11085/16-01 No.: IEC / EN Clause Requirement + Test Result - Remark Verdict Wet leakage current test (Initial) - Test date [MM/DD/YYYY]... : 01/06/ Test voltage applied [V]... : 2 minutes of Solution resistivity [Ω cm] / < : 407 P Solution temperature [ C] / 22±3... : 19.2 P Sample # Required [MΩ] Measured [MΩ] >1000 P >1000 P >1000 P Supplementary information: Minimum requirement according to the standard is 40MΩ m 2. Area of the module is 1.94m 2. - PV-F-009 TRF Page 20 of 45 Version 1.5

21 File No.: SHV11085/16-01 No.: IEC / EN Clause Requirement + Test Result - Remark Verdict 10.6A Performance at STC - Test date [MM/DD/YYYY]... : 01/06/ Sample #... : 1 - Test method... : Indoor Outdoor - Irradiance [W/m2]... : Module temperature [ C]... : Condition Voc [V] Vmp [V] Isc [A] Impp [A] Pmpp [W] FF [%] - STC Supplementary information: N/A - PV-F-009 TRF Page 21 of 45 Version 1.5

22 File No.: SHV11085/16-01 No.: IEC / EN Clause Requirement + Test Result - Remark Verdict 10.18B Bypass diode thermal test Test date [MM/DD/YYYY]... : 01/22/ Sample #... : 2 - Module temperature [ C]... : 75 - Number of diodes in junction box... : 3 - Diode manufacturer... : Tonglin - Diode type designation... : TL Max. permissible junction temperature Tjmax [ C]... : Diode #... : N/A N/A N/A - Current flow applied [A]... : Max. diode surface temperature [ C] a : a a a N/A N/A N/A - Voltage drop [V]... : N/A N/A N/A - Power dissipation [W]... : N/A N/A N/A - Thermal resistance junction to case (RTHJC) [ C/W]... : Calculated max. junction temperature Tjcalc [ C] a... : N/A N/A N/A a a a N/A N/A N/A - Tjcalc < Tjmax?... : Yes Yes Yes N/A N/A N/A P Current flow (1.25 * Isc) applied [A]... : Max. diode surface temperature [ C] a. : a a a N/A N/A N/A - Diode still work?... : Yes Yes Yes N/A N/A N/A P Supplementary information: a: measured at diode case Visual inspection after bypass diode thermal test - Test date [MM/DD/YYYY]... : 01/24/ Sample # Nature and position of findings - comments or attach photos - 2 No visual defects P Supplementary information: N/A Maximum power determination after bypass diode thermal test - Test date [MM/DD/YYYY]... : 01/24/ Module temperature [ C]... : Corrected to 25 - Irradiance [W/m 2 ]... : Corrected to Sample # Voc [V] Vmpp [V] Isc [A] Impp [A] Pmpp [W] FF [%] Pmpp degradation after test [%] / 5.. : P Supplementary information: N/A - - PV-F-009 TRF Page 22 of 45 Version 1.5

23 File No.: SHV11085/16-01 No.: IEC / EN Clause Requirement + Test Result - Remark Verdict 10.3 Insulation test after bypass diode thermal test - Test date [MM/DD/YYYY]... : 01/24/ Test voltage applied [V]... : 2 minutes of 1000 and 1 minute of Sample # Required [MΩ] Measured [MΩ] Dielectric breakdown? >1000 No P Supplementary information: Minimum requirement according to the standard is 40MΩ m 2. Area of the module is 1.94m 2. - PV-F-009 TRF Page 23 of 45 Version 1.5

24 File No.: SHV11085/16-01 No.: IEC / EN Clause Requirement + Test Result - Remark Verdict 10.9B Hot-spot endurance test Test date [MM/DD/YYYY]... : 02/24/ Sample #... : 2 - Cell interconnection circuit... : S / SP / SPS - Module temperature [ C]... : Determination of worst case cell - Maximum measured cell temperature in 5 cycles [ C]... : Shading rate: 15 - Supplementary information: N/A Visual inspection after hot-spot endurance test - Test date [MM/DD/YYYY]... : 02/27/ Sample # Nature and position of findings - comments or attach photos - 2 No visual defects P Supplementary information: N/A Maximum power determination after hot-spot endurance test - Test date [MM/DD/YYYY]... : 02/27/ Module temperature [ C]... : Corrected to 25 - Irradiance [W/m 2 ]... : Corrected to Sample # Voc [V] Vmpp [V] Isc [A] Impp [A] Pmpp [W] FF [%] Pmpp degradation after test [%] / 5.. : P Supplementary information: N/A Insulation test after hot-spot endurance test - Test date [MM/DD/YYYY]... : 02/27/ Test voltage applied [V]... : 2 minutes of 1000 and 1 minute of Sample # Required [MΩ] Measured [MΩ] Dielectric breakdown? >1000 No P Supplementary information: Minimum requirement according to the standard is 40MΩ m 2. Area of the module is 1.94m PV-F-009 TRF Page 24 of 45 Version 1.5

25 File No.: SHV11085/16-01 No.: IEC / EN Clause Requirement + Test Result - Remark Verdict 10.2F Maximum power determination (final) - Sample # Pmpp initial [W] Pmpp final [W] Pmpp degradation after test sequence [%] / P Supplementary information: N/A - - PV-F-009 TRF Page 25 of 45 Version 1.5

26 File No.: SHV11085/16-01 No.: IEC / EN Clause Requirement + Test Result - Remark Verdict 10.15F Wet leakage current test (final) - Test voltage applied [V]... : 2 minutes of Sample # Required [MΩ] Measured [MΩ] >1000 P Supplementary information: Minimum requirement according to the standard is 40MΩ m 2. Area of the module is 1.94m 2. - PV-F-009 TRF Page 26 of 45 Version 1.5

27 File No.: SHV11085/16-01 No.: IEC / EN Clause Requirement + Test Result - Remark Verdict Test results of IEC / EN Application class P - The module(s) has/have been evaluated for the following application class (Class A, B, C): Class A P Supplementary information: Since there re no constructional changes compared with the already certified module types, this part is considered as passed. Please refer to test reports as listed from for detail information. - Remark: Application Class as in IEC : - Class A: Modules rated for use in this application class may be used in systems operating at greater than 50V DC or 240W, where general contact access is anticipated. Modules qualified for safety through this part of IEC and IEC and within this application class are considered to meet the requirements for safety class II. - Class B: Modules rated for use in this application class are restricted to systems protected from public access by fences, location, etc. Modules evaluated within this application class provide protection by basic insulation, are considered to meet the requirements for safety class 0. - Class C: Modules rated for use in this application class are restricted to systems operating at less than 50V DC and 240 W, where general contact access is anticipated. Modules qualified for safety through this part of IEC and IEC within this application class are considered to meet the requirements for safety class III. Application Class as in EN : - Class A: Modules rated for use in this application class may be used in systems operating at greater than 120V DC. Modules qualified for safety through this part of EN and EN within this application class are considered to meet the requirements for safety class II. - Class B: Modules rated for use in this application class are restricted to systems protected from public access by fences, location, etc. Modules evaluated within this application class provide protection by basic insulation, are considered to meet the requirements for safety class 0. - Class C: Modules rated for use in this application class are restricted to systems operating at less than 120V DC. Modules qualified for safety through this part of EN and EN within this application class are considered to meet the requirements for safety class III. PV-F-009 TRF Page 27 of 45 Version 1.5

28 File No.: SHV11085/16-01 No.: IEC / EN Clause Requirement + Test Result - Remark Verdict Test results of IEC / EN Module type: SR-M MST26 Reverse current overload test - Maximum over-current protection rating [A]... : 20 - Applied current [A]... : 27 - Applied voltage [V] / high - low... : Test duration [h]... : 2 - Sample # Nature and position of findings - Comments or attach photos - 3 No flaming of the module No flaming or charring of the cheesecloth No flaming of the tissue paper MST 17 requirements fulfilled (see table MST17) P Supplementary information: N/A - PV-F-009 TRF Page 28 of 45 Version 1.5

29 File No.: SHV11085/16-01 No.: IEC / EN Clause Requirement + Test Result - Remark Verdict MST17 Wet leakage current test - Maximum system voltage [V]... : Test voltage applied [V]... : Minimum allowable insulation resistance [MΩ]... : Sample # Position in test sequence Resistance [MΩ] - 3 Initial examination >1000 P Preconditioning: MST Final examination >1000 P Supplementary information: Minimum requirement according to the standard is 40MΩ m 2. Area of the module is 1.94m 2. - PV-F-009 TRF Page 29 of 45 Version 1.5

30 File No.: SHV11085/16-01 No.: Annex 1: Constructional Data Form (CDF) PV-F-009 TRF Page 30 of 45 Version 1.5

31 File No.: SHV11085/16-01 No.: PV-F-009 TRF Page 31 of 45 Version 1.5

32 File No.: SHV11085/16-01 No.: PV-F-009 TRF Page 32 of 45 Version 1.5

33 File No.: SHV11085/16-01 No.: PV-F-009 TRF Page 33 of 45 Version 1.5

34 File No.: SHV11085/16-01 No.: PV-F-009 TRF Page 34 of 45 Version 1.5

35 File No.: SHV11085/16-01 No.: PV-F-009 TRF Page 35 of 45 Version 1.5

36 File No.: SHV11085/16-01 No.: PV-F-009 TRF Page 36 of 45 Version 1.5

37 File No.: SHV11085/16-01 No.: PV-F-009 TRF Page 37 of 45 Version 1.5

38 File No.: SHV11085/16-01 No.: PV-F-009 TRF Page 38 of 45 Version 1.5

39 File No.: SHV11085/16-01 No.: PV-F-009 TRF Page 39 of 45 Version 1.5

40 File No.: SHV11085/16-01 No.: PV-F-009 TRF Page 40 of 45 Version 1.5

41 File No.: SHV11085/16-01 No.: PV-F-009 TRF Page 41 of 45 Version 1.5

42 File No.: SHV11085/16-01 No.: Annex 2: List of measurement equipment Test clause Equipment Identification Next calibration date 10.1/MST01 Irradiance Illuminometer OI /10/ Pulsed solar simulator EV /29/2017 Data Acquisition Unit TT /09/ /MST /MST17 Withstanding voltage / Insulation resistance tester EV /03/ /MST22 MST21 Pulsed solar simulator TT /13/2017 BBB Steady-State Light Source ES /11/2017 Temperature tester TT /01/ MST26 Power supply ES /03/2017 Temperature tester TT /01/2017 PV-F-009 TRF Page 42 of 45 Version 1.5

43 File No.: SHV11085/16-01 No.: Annex 3: Statement of the estimated uncertainty of the test results The total measuring uncertainty of Pmpp is 2.8% The total measuring uncertainty of Isc is 2.6% The total measuring uncertainty of Voc is 0.7% PV-F-009 TRF Page 43 of 45 Version 1.5

44 File No.: SHV11085/16-01 No.: Annex 4: Photos Module type: SR-M Front overview Back overview Label Solar cell Frame Grounding Mark PV-F-009 TRF Page 44 of 45 Version 1.5

45 File No.: SHV11085/16-01 No.: Junction box (TL-BOX026-15ENP) Junction box (opened) N/A Bypass diode (junction box with potting material) Cable (PV1-F 1x4.0mm 2 ) Mark (Do not disconnect under load) Connectors (TL-CABLE01S) End of test report PV-F-009 TRF Page 45 of 45 Version 1.5