. A. report to the security guard B. inform the foreman C. drink more water D. apply for a Permit-to-work.

Size: px
Start display at page:

Download ". A. report to the security guard B. inform the foreman C. drink more water D. apply for a Permit-to-work."

Transcription

1 01 In a shipyard, before you are allowed to carry out any hot work, you must. A. report to the security guard B. inform the foreman C. drink more water D. apply for a Permit-to-work. 02 Which is a good example of clean and safe workplace? A. Leave the tools around the floor after use B. Keep the tools properly after use C. Pass the tools to your co-workers by throwing D. Keep several days of rubbish before throwing them away 03 What type of permit-to-work is required before carrying out fuel oil transfer? A. Bunkering permit B. Radiography permit C. Hot-work permit D. Spray painting permit 04 If a worker is sick and needs to take sick leave, he should. A. inform the employer within 48 hours B. stay home and inform his employer at a suitable time C. write a letter to the employer D. get a friend to inform the employer 05 Singapore laws apply to. A. Singapore citizens only B. Foreigners only C. Singapore citizens and permanent residents only D. Singapore citizens, permanent residents and foreigners. Page 1 of 10

2 06 What happens if you do gas cutting near a leaking gas hose? A. Nothing will happen. B. Fire and explosion will occur. C. The area will be more cooling. D. The job can be done faster. 07 If an employer is late in paying a worker s salary by more than a week, the worker should call the Ministry of Manpower at the following telephone number: A. 999 B. 995 C D Which of the following will NOT happen if any of the work permit conditions is being breached? A. the worker may be jailed or fined B. the worker's work permit may be cancelled C. the worker may be asked to work overtime D. the worker may not be allowed to work in Singapore in the future 09 When you maintained good housekeeping at your workplace, you will. A. cause fire and explosion B. cause tripping and slipping C. reduce productivity D. prevent accident 10 Which of the following working environment is more likely to cause heat stress? A. Working in an air-conditioned room. B. Working under the hot sun. C. Working under water. D. Working under a shelter. Page 2 of 10

3 11 Which is an example of a heat source that lead to a fire? A. B. C. D. 12 Refer to the sample work permit card. Label (B) shows that the foreign worker can only work in the industry. A. marine B. manufacturing C. construction D. cleaning Page 3 of 10

4 13 Before you climb up the mobile tower scaffold to carry out work activity, you should ensure that. A. all the castor wheels are locked B. all the castor wheels are not locked C. you have obtained permission from the security D. you have obtained permission from the police 14 What does this safety sign tell you? A. Wear your face shield B. No peeping C. Wash your face D. Strap your hair 15 Which one of the following statements is correct? A. A foreign worker cannot renew his work permit B. A foreign worker cannot set up his own business C. A foreign worker cannot keep his own work permit card D. A foreign worker cannot take sick leave 16 What does the safety sign stand for? A. Caution, risk of fire. B. Caution, risk of radiation. C. Caution, risk of smoking. D. Caution, risk of lightning. Page 4 of 10

5 17 Before you work onboard a ship, it is important for you to know. A. where to find food B. where to sleep C. how to work more overtime D. the emergency escape route 18 Which of the following statements is CORRECT? A worker is entitled to. A. 1 rest day per week. B. 1 rest day per fortnight. C. 1 rest day per month. D. 1 rest day per year. 19 Refer to the sample work permit card. If the worker wants to continue working in Singapore after, he must renew his work permit. A. 16/06/2004 B. 25/06/2004 C. 25/06/2006 D. 24/06/2006 Page 5 of 10

6 20 Which of the following machinery will be used to shift heavy materials around the shipyard? A. Welding machine B. Photocopy machine C. Forklift D. Grinding machine 21 If you are being caught by the authority for removing guardrails for the first time, you will be. A. fined B. killed C. rewarded D. promoted 22 You are doing hot-work in a cargo tank. Which other work CANNOT be done at the same location? A. Painting B. Grinding C. Gas cutting D. Arc welding 23 Which of the following will NOT be punished under the Singapore laws? A. sprain ankle during work B. make a false police report C. join others in rioting D. take part in a robbery 24 Why is tank cleaning necessary before hot work can be carried out? A. The tank can be filled with ballast safely. B. The work can be done safely. C. The tank is clean for workers to work in. D. The tank is less hot when hot work is carried out. Page 6 of 10

7 25 Which of these materials does NOT burn easily? A. Steel B. Wood C. Paper D. Plastic 26 Which is correct about the dangers of using a damaged hand tools when working? A. You will be promoted by your boss. B. You will grow taller. C. You may injured your co-workers. D. You may get a pay raise. 27 What can you do to prevent irritation of eyes when handling of chemical onboard a ship? A. Wear a safety helmet B. Wear a safety goggle or face shield C. Wear a safety harness D. Wear leather glove 28 If you are jaywalking, you may be. A. issued with a warning letter only B. fined up to S$1,000 or imprisoned up to 3 mths C. given death sentence D. suffer a pay cut 29 What does the safety sign stand for? A. Hearing protection must be worn. B. Eye protection must be worn. C. Head protection must be worn. D. Face-shield must be worn. Page 7 of 10

8 30 Which work requires a permit-to-work? A. Sweeping the store. B. Housekeeping on deck. C. Cleaning the hand tools. D. Spray painting work. 31 When working on a scaffold platform in the shipyard, you must. A. not anchor your safety harness B. anchor the safety harness on a proper anchorage point C. ask someone to hold your lanyard properly D. not wear a safety harness 32 Can you leave the lids of drums of paints or chemicals open after use? A. Yes, this helps to release cool the paints or chemicals. B. No, the lid must be closed after used. C. No, unless you want to use later. D. Yes, if there is a fire watchman. 33 In the shipyard, which of the following activity is considered a high risk work which requires a permit to work? A. Bending of steel. B. Hot work. C. Housekeeping. D. Tightening of bolt and nut. 34 Why do you need the hot work permit to be approved before you can do welding works in the oil tank? A. To make the ship repair manager happy. B. Because the boss says so. C. To prevent fire and explosion. D. So that your salary will increase. Page 8 of 10

9 35 How can flammable and explosive gases be removed from a confine space in a shipyard? A. Use hand to fan B. Chemical cleaning. C. Forced ventilation D. Using water 36 What kind of permit is designed to prevent fire and explosion? A. Hot work B. Deck washing C. Toilet cleaning D. Scaffolding erection 37 What does this safety sign tell you? A. Radiation hazard B. Electrical hazard C. Lightning hazard D. Falling hazard 38 To prevent fire, what must you check before doing hot work? A. There is no combustible material and flammable vapour. B. There is no oxygen. C. There is no security around. D. There is no hot work permit. Page 9 of 10

10 39 Referring to the picture. What operation is in progress? A. High pressure coating. B. High pressure washing. C. High pressure welding. D. High pressure ballasting. 40 Which safety measure can prevent falling from height? A. Wear life jacket when working at height. B. Cover floor opening with plastic. C. Anchor safety harness properly anchored when working at height D. Use barricade tape as guardrail and midrail Page 10 of 10

Hot Work Program. Purpose of Procedure:

Hot Work Program. Purpose of Procedure: BGSU Hot Work Program Page 1 Bowling Green State University Purpose of Procedure: Hot Work Program These procedures have been established to comply with Ohio s Public Employee Risk Reduction Act, the OSHA

More information

DUQUESNE UNIVERSITY HOT WORK PROGRAM

DUQUESNE UNIVERSITY HOT WORK PROGRAM DUQUESNE UNIVERSITY HOT WORK PROGRAM Prepared by: Environmental Health and Safety Department TABLE OF CONTENTS Page Purpose 1 Scope 1 Responsibilities 2 General Requirements 2 Welding or Cutting Containers

More information

The Ohio State University. Hot Work Permit Program (Welding, Cutting and Brazing)

The Ohio State University. Hot Work Permit Program (Welding, Cutting and Brazing) Environmental Health & Safety 1314 Kinnear Rd. Columbus, Ohio 43212 Phone (614) 292-1284 Fax (614) 292-6404 http://www.ehs.osu.edu/ The Ohio State University Hot Work Permit Program (Welding, Cutting and

More information

University of Central Missouri Hot Work Permit Program

University of Central Missouri Hot Work Permit Program 1. Introduction University of Central Missouri Hot Work Permit Program The University of Central Missouri's (UCM) Hot Work Program is designed to minimize risks to our campus community, which includes

More information

HOT WORK PROGRAM OSHA

HOT WORK PROGRAM OSHA HOT WORK PROGRAM 1910.252 OSHA Table of Contents Purpose... 3 Definitions... 3 Responsibilities... 3 Hot Work Permitted Locations... 5 Fire Prevention Precautions... 5 Personal Protective Equipment...

More information

HOT WORK SAFETY GUIDE. Specific responsibilities relating to hot work operations are outlined below.

HOT WORK SAFETY GUIDE. Specific responsibilities relating to hot work operations are outlined below. HOT WORK SAFETY GUIDE Version Date Comments 5 March, 2012 Revised document 6 June, 2015 Update code citation - SFPC 2012 A. INTRODUCTION The purpose of this Guide is to provide information regarding welding

More information

OFFICE OF STATE HUMAN RESOURCES

OFFICE OF STATE HUMAN RESOURCES OFFICE OF STATE HUMAN RESOURCES NUMBER: HWP-1 TOTAL PAGES: 6 SUBJECT: Hot Work Program Effective Date: Revision Date: Revision #: RELATED LEGISLATION: This program outlines procedures for [Agency/University]

More information

Hot Work Safety Program

Hot Work Safety Program Hot Work Safety Program 6900-2.0 Associated OHS Process: General Industry & Construction Safety The master copy of this document resides in electronic format. Printed copies of this document are for convenience

More information

Villanova University Department of Environmental Health and Safety Policy and Procedure Manual

Villanova University Department of Environmental Health and Safety Policy and Procedure Manual Villanova University Department of Environmental Health and Safety Policy and Procedure Manual Subject: Hot Works Procedure Number: S15 Effective: 20 Apr 99 Revised: 9-15-15 I Purpose: To establish a procedure

More information

Classification: Public Rev. 00 June 2018 Page 1 of 25

Classification: Public Rev. 00 June 2018 Page 1 of 25 Classification: Public Rev. 00 June 2018 Page 1 of 25 Rev. 00 June 2018 Page 2 of 25 Rev. 00 June 2018 Page 3 of 25 Rev. 00 June 2018 Page 4 of 25 Rev. 00 June 2018 Page 5 of 25 Rev. 00 June 2018 Page

More information

Roger Williams University Hot Work Plan

Roger Williams University Hot Work Plan Roger Williams University Hot Work Plan Roger Williams University Dept. Of Environmental Health and Safety One Old Ferry Road Bristol, RI 02809 Adopted: April 26, 2011(President s Cabinet) Roger Williams

More information

(WELDING, CUTTING, AND OPEN FLAME WORK)

(WELDING, CUTTING, AND OPEN FLAME WORK) THE UNIVERSITY OF TEXAS AT TYLER Hot Work (WELDING, CUTTING, AND OPEN FLAME WORK) Program 2016 Table of Contents 1. INTRODUCTION... 3 2. PURPOSE... 3 3. APPLICATION... 3 4. DEFINITIONS... 3 5. PROGRAM

More information

HOT WORK GUIDELINES 3. MANDATORY AREAS REQUIRING HOT WORK PERMITS Within the Service Station Site

HOT WORK GUIDELINES 3. MANDATORY AREAS REQUIRING HOT WORK PERMITS Within the Service Station Site 1. GENERAL This procedure gives guidelines for the precautions and preparation that should be followed to ensure that work covered by a hot work permit can be carried out safely without risk to people

More information

HOT WORK MANAGEMENT PROGRAM

HOT WORK MANAGEMENT PROGRAM HOT WORK MANAGEMENT PROGRAM Rose-Hulman Institute of Technology Table of Contents SECTION 1.0 Purpose 2.0 Regulatory Reference 3.0 Scope 4.0 Elements of the Program 5.0 Responsibility 6.0 Training and

More information

TAMPA ELECTRIC COMPANY ENERGY SUPPLY HOT WORK PERMITTING PROGRAM

TAMPA ELECTRIC COMPANY ENERGY SUPPLY HOT WORK PERMITTING PROGRAM TABLE OF CONTENTS TITLE PAGE # PURPOSE / INTRODUCTION 1 RESPONSIBILITY 2 EMPLOYEE TRAINING AND DOCUMENTATION 3 PROGRAM REQUIREMENTS 4 HOT WORK PERMIT PLANNING AND PRECAUTIONS 4 6 FIREWATCH 6, 7 HOT WORK

More information

Hot Work Safety and the Permitting Process. Leaders Guide and Quiz

Hot Work Safety and the Permitting Process. Leaders Guide and Quiz ! Hot Work Safety and the Permitting Process Leaders Guide and Quiz 4879 INTRODUCTION TO THE PROGRAM Structure and Organization Information in this program is presented in a definite order so that employees

More information

Hot Work Program June 2017

Hot Work Program June 2017 Hot Work Program June 2017 Hot Work Program TABLE of CONTENTS I. General Information II. Definitions III. Roles and Responsibilities IV. Hot Work Areas V. Hot Work Permit VI. Hot Work Permit-Not Required

More information

Hot Work Permitting Program

Hot Work Permitting Program Hot Work Permitting Program Environmental Health, Safety, and Risk Management Department Box 6113, SFA Station Nacogdoches, Texas 75962-6113 Original: January 2004 Revised: January 2011, April 2018 Table

More information

Hot Work Program. Program Origination: October, 2017

Hot Work Program. Program Origination: October, 2017 Hot Work Program Program Origination: October, 2017 Contact Personnel: Jason Kayser, Fire & Safety Specialist Jason.kayser@uni.edu 319-273-2004 Hot Work Program UNI Employees & Contractors October, 2017

More information

KENNECOTT UTAH COPPER

KENNECOTT UTAH COPPER 16.1.1 INTRODUCTION 16.1.1.1 The purpose of this standard is to define the requirement for performing hot work operations on certain components of machinery, equipment and structures and preventing the

More information

"HOT WORK SAFETY AND THE PERMITTING PROCESS"

HOT WORK SAFETY AND THE PERMITTING PROCESS PRESENTER'S GUIDE "HOT WORK SAFETY AND THE PERMITTING PROCESS" Part of the "SAFETY MEETING KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS OUTLINE

More information

Safe Code of Practice. No.05 Hot Works Procedure

Safe Code of Practice. No.05 Hot Works Procedure Safe Code of Practice No.05 Hot Works Procedure Version: 1.0 Date: 28 TH June 2016 Date: 28/0616 Review Date: 28/06/19 Issue No: 6 Page 1 of 7 INTRODUCTION The aim of this Safe Code of Practice is to give

More information

IWU PHYSICAL PLANT SAFETY PROGRAM

IWU PHYSICAL PLANT SAFETY PROGRAM STANDARDS Welding, Cutting and Brazing/General Requirements OSHA 1910.252, 1. Purpose Hot work is any temporary or permanent operation involving open flames or producing heat and/or sparks. This includes

More information

AUTORIDAD DEL CANAL DE PANAMÁ EXECUTIVE VICE PRESIDENCY FOR OPERATIONS

AUTORIDAD DEL CANAL DE PANAMÁ EXECUTIVE VICE PRESIDENCY FOR OPERATIONS AUTORIDAD DEL CANAL DE PANAMÁ EXECUTIVE VICE PRESIDENCY FOR OPERATIONS 3654-A (OPXI) ADVISORY TO SHIPPING No. A-28-2018 August 14, 2018 TO : All Shipping Agents, Owners, and Operators SUBJECT: Revision

More information

Areas that have been designed and constructed for performing open-flame or spark-producing work.

Areas that have been designed and constructed for performing open-flame or spark-producing work. PURPOSE Baylor University recognizes that there is a potential for injury to people and damage to property that can result from fire or sparks that arise when hot work is performed outside of a designated

More information

Hot Work Procedures. Competent means possessing knowledge, experience and training to perform a specific duty.

Hot Work Procedures. Competent means possessing knowledge, experience and training to perform a specific duty. Hot Work Procedures Purpose This procedure will provide the knowledge and equipment required to minimize the identified workplace hazards associated with Hot Work. These procedures will provide: information

More information

SUNY Geneseo ENVIRONMENTAL HEALTH & SAFETY

SUNY Geneseo ENVIRONMENTAL HEALTH & SAFETY Revision No.: 1 Page 1 of 7 I. PURPOSE The purpose of this policy is to establish minimum standards for safely conducting hot work tasks to help mitigate hazards that could occur during hot work operations.

More information

HOT WORK 1. PURPOSE 2. SCOPE 3. KEY TERMS

HOT WORK 1. PURPOSE 2. SCOPE 3. KEY TERMS Doc owner: Authorised by: HR Manager WHS Group Executive Human Resources HOT WORK Version PRO-05-11-01 Issue date 08/2017 1. PURPOSE The purpose of this procedure is to provide guidance to David Jones

More information

SHOULD BE CHANGED TO READ:

SHOULD BE CHANGED TO READ: ERRATA NOTICE TO ALL RECEIVERS OF AND USERS OF: PORT OF LOS ANGELES TARIFF NO. 4 Item 1700 (b) DANGEROUS CARGO AND EXPLOSIVES ON VESSELS (b) It shall be unlawful for any person to handle, transport, load,

More information

HOT WORK PERMIT PROGRAM REVISED AND DISTRIBUTED BY: THE UNIVERSITY OF VERMONT DEPARTMENT OF PHYSICAL PLANT TRAINING & COMPLIANCE OFFICE

HOT WORK PERMIT PROGRAM REVISED AND DISTRIBUTED BY: THE UNIVERSITY OF VERMONT DEPARTMENT OF PHYSICAL PLANT TRAINING & COMPLIANCE OFFICE University of Vermont Department of Physical Plant Burlington, Vermont HOT WORK PERMIT PROGRAM REVISED AND DISTRIBUTED BY: THE UNIVERSITY OF VERMONT DEPARTMENT OF PHYSICAL PLANT TRAINING & COMPLIANCE OFFICE

More information

RISKTOPICS. DISCUSSION For the purposes of this document, hot work: Management practices: Hot work Property and Business Interruption January 2013

RISKTOPICS. DISCUSSION For the purposes of this document, hot work: Management practices: Hot work Property and Business Interruption January 2013 RISKTOPICS Management practices: Hot work Property and Business Interruption January 2013 This document highlights the property conservation responsibilities of those who utilize hot work outside of areas

More information

University of Nevada, Reno

University of Nevada, Reno University of Nevada, Reno HOT WORK PERMIT PROGRAM Program Contact Person: John A. Braun, CSP Environmental Health and Safety University of Nevada, Reno Phone: 775-784-6478 HOT WORK PERMIT PROGRAM UNIVERSITY

More information

PURPOSE:... 3 EMPLOYEE CLASSIFICATIONS:... 3 OUTSIDE PERSONNEL (I.E., CONTRACTORS):... 4 HOT WORK REQUIREMENTS:... 4 EMPLOYEE TRAINING:...

PURPOSE:... 3 EMPLOYEE CLASSIFICATIONS:... 3 OUTSIDE PERSONNEL (I.E., CONTRACTORS):... 4 HOT WORK REQUIREMENTS:... 4 EMPLOYEE TRAINING:... South Central College North Mankato/Mankato Campus 1920 Lee Boulevard N. Mankato, MN 56002-1920 Faribault Campus 1225 Third Street SW Faribault, MN 55021-5782 Adoption Date: 09-18-15 Revision Date: 02-23-17

More information

Desert Research Institute Hot Work Permit Program

Desert Research Institute Hot Work Permit Program 1.0 INTRODUCTION 1.1 PURPOSE The purpose of this policy is to prevent any fires that may result from hot work processes. 1.2 SCOPE 1.2.1 For the purposes of this policy, hot work is defined as any temporary

More information

HOT WORK SAFETY GUIDELINE

HOT WORK SAFETY GUIDELINE HOT WORK SAFETY GUIDELINE SAFETY GUIDELINE 2017 1 Hot work safety guideline Index 1 Hot work training... 2 2 Purpose of the safety guidelines... 2 3 Binding force of the safety guidelines... 2 4 Definitions...

More information

MCW s Hot Work Permit Program

MCW s Hot Work Permit Program 2019 MCW s Hot Work Permit Program - Hot Work/Fire Watch Operations This document is the Medical College of Wisconsin s (MCW) written program for conducting hot work, and identifies roles and responsibilities

More information

General Hot Work Program Guidelines. Lyndsey Beaudin

General Hot Work Program Guidelines. Lyndsey Beaudin General Hot Work Program Guidelines Lyndsey Beaudin WHY SUCH A HOT TOPIC? NEW YORK STATE OFFICE OF FIRE PROTECTION AND CONTROL Violation: Hot Work Permit not issued for Hot Work Area 2603.4 Hot Work Program

More information

KENNECOTT UTAH COPPER

KENNECOTT UTAH COPPER 16.1.1 INTRODUCTION 16.1.1.1 The purpose of this standard is to define the requirement for performing hot work operations on certain components of machinery, equipment and structures and preventing the

More information

Statutory Instrument 1992 No.3004 The Workplace (Health, Safety and Welfare) Regulations 1992

Statutory Instrument 1992 No.3004 The Workplace (Health, Safety and Welfare) Regulations 1992 Statutory Instrument 1992 No.3004 The Workplace (Health, Safety and Welfare) Regulations 1992 CDM 2007 Regulation 11 requires that: in designing any structure for use as a workplace the designer shall

More information

Risk Control Guide HOT WORK

Risk Control Guide HOT WORK HOT WORK RCG003 (E)-v2-01/2017 Page 1 2017 Royal & Sun Alliance Insurance plc Introduction Hot work is defined as any operation that involves open flames or produces heat or sparks, e.g. cutting, grinding,

More information

Making sense of risk Risk engineering. Marine hot work Permit to Work (PTW) systems

Making sense of risk Risk engineering. Marine hot work Permit to Work (PTW) systems Marine hot work Permit to Work (PTW) systems Marine hot work Permit to Work (PTW) systems Hot work is any operation involving open flames or producing heat and/or sparks, including but not limited to welding,

More information

Permit to Work Systems

Permit to Work Systems Permit to Work Systems Guidance Note 12 Jul 16 1 Permits to work systems Introduction This Guidance Note gives practical information about permit to work systems. A sample template has been included in

More information

Hot Work Permit Program

Hot Work Permit Program Environmental Health and Safety Office Hot Work Permit Program Permitting Process for welding, cutting and brazing. Adopted: March 6, 2007 Revised: 7/18/16 http://www.stlawu.edu/environmentalhealth-and-safety/environmental-healthand-safety-policies

More information

Coles Express Work Clearance: Induction for Contractors

Coles Express Work Clearance: Induction for Contractors Coles Express Work Clearance: Induction for Contractors Part of the Coles Online Contractor Induction system, for completion by contractors who will conduct works on Coles Express sites. Prerequisites

More information

HOT WORK PROCEDURE. A Page 1 of 20

HOT WORK PROCEDURE. A Page 1 of 20 TABLE OF CONTENTS 1. OBJECTIVE...4 2. SCOPE...4 3. DEFINITIONS...4 4. RESPONSIBILITIES...5 5. HAZARD AND RISK ASSESSMENT...5 5.1 PPA Controlled Hot Work Requirements Flow Chart...5 6. HOT WORK PERMIT...6

More information

Safety & Risk Management

Safety & Risk Management Safety & Risk Management (B) Construction Safety Law http://www.mom.gov.sg/legislation/ occupational-safetyhealth/pages/default.aspx ACTS Work Injury Compensation Act (WICA) Workplace Safety and Health

More information

Hot Work Program. Roles and Responsibilities. Management. PAI Responsibilities

Hot Work Program. Roles and Responsibilities. Management. PAI Responsibilities Hot Work Program Scope is aware of the hazards associated with hot work operations (cutting, welding, brazing and soldering, grinding, etc.) is committed to keeping our employees safe and to control hazards

More information

Hot Work. Approved by: Ruth Hampton Review Date: 6 th December 2015

Hot Work. Approved by: Ruth Hampton Review Date: 6 th December 2015 5 WHS PROCEDURE P28-01 Page 1 of 7 Issue: 2 1. Intent The Salvation Army Australia Eastern Territory (TSA-AUE) is committed to the provision of a safe, healthy and injury free environment for all persons

More information

CHAPTER 1 GENERAL. 1

CHAPTER 1 GENERAL.  1 MINISTERIAL REGULATION ON THE PRESCRIBING OF STANDARD FOR ADMINISTRATION AND MANAGEMENT OF OCCUPATIONAL SAFETY, HEALTH AND WORK ENVIRONMENT IN CONFINED SPACE B.E. 2547 -------------------------------------

More information

Permit to Work System Training for Supervisors Managing Hot Works & Other Permits - Presenter s Guide

Permit to Work System Training for Supervisors Managing Hot Works & Other Permits - Presenter s Guide Permit to Work System Training for Supervisors Managing Hot Works & Other Permits - Presenter s Guide TABLE OF CONTENTS 1.0 PURPOSE... 3 2.0 SCOPE... 3 3.0 RELATED DOCUMENTS... 3 4.0 TRAINING DELIVERY...

More information

Program Title Hot Work Program. Classification Fire Safety and Emergency Response. Program No INTRODUCTION

Program Title Hot Work Program. Classification Fire Safety and Emergency Response. Program No INTRODUCTION 1.0 INTRODUCTION ENVIRONMENTAL HEALTH AND SAFETY PROGRAM MANUAL As part of the Weill Cornell Medical College (WCMC) Environmental Health and Safety (EHS) Program Manual, this has been established. The

More information

SAFETY AND HEALTH STANDARD HOT WORK PERMIT Effective Date: 06/10/10 Standard: 16.1 Document Number: KUCSH0040 Rev: 04

SAFETY AND HEALTH STANDARD HOT WORK PERMIT Effective Date: 06/10/10 Standard: 16.1 Document Number: KUCSH0040 Rev: 04 16.1.1 INTRODUCTION 16.1.1.1 The purpose of this standard is to prevent the inadvertent ignition of combustible materials when performing hot work. 16.1.2 DEFINITIONS 16.1.2.1 Hot work - includes welding,

More information

Legal Obligations in Construction Contracts Concluded by Employers Operating in Egypt

Legal Obligations in Construction Contracts Concluded by Employers Operating in Egypt Legal Obligations in Construction Contracts Concluded by Employers Operating in Egypt Copyright 2015, L&E Global We set out below important legal information that applies to all companies and entities

More information

Environmental, Health and Safety. UNC Charlotte Hot Work Program (Welding, Cutting, and Brazing)

Environmental, Health and Safety. UNC Charlotte Hot Work Program (Welding, Cutting, and Brazing) Environmental, Health and Safety UNC Charlotte Hot Work Program (Welding, Cutting, and Brazing) January 2014 TABLE OF CONTENTS PURPOSE:... 2 SCOPE:... 2 HOT WORK RESPONSIBILITIES... 2 SPECIFIC DEPARTMENTAL

More information

Hot Work Policy & Procedure

Hot Work Policy & Procedure Hot Work Policy & Procedure Policy: Reference: The purpose of the PCS General Contractor Hot Work policy is to protect personnel and property from a fire caused by hot work. The PCS Hot Work procedure

More information

VIRU KEEMIA GRUPP AS. Hot Works Safety Management Instruction No. 136

VIRU KEEMIA GRUPP AS. Hot Works Safety Management Instruction No. 136 VKGj.TTO/39 VIRU KEEMIA GRUPP AS KINNITAN (allkirjastatud digitaalselt) Priit Rohumaa Juhatuse esimees veebruar 2013 (allkirjastatud digitaalselt) Meelis Eldermann Juhatuse liige veebruar 2013 Hot Works

More information

Hot Work Permit Program

Hot Work Permit Program Hot Work Permit Program 1 2 TABLE OF CONTENTS Section Title Page 1.0 Scope 3 2.0 Standards and Regulations Involved/Target Groups 3 3.0 Responsibilities 4 4.0 Training.. 5 5.0 Recordkeeping. 5 6.0 Permits

More information

Unvalidated References: Explosives Act 1953

Unvalidated References: Explosives Act 1953 Unvalidated References: Explosives Act 1953 This reprint of this Statutory Instrument incorporates all amendments, if any, made before25 November 2006 and in force at 1 January 2003.... Legislative Counsel

More information

PROCEDURES FOR HOT WORK PERMITS, HOT WORK DISPENSATIONS & GAS FREE CERTIFICATES

PROCEDURES FOR HOT WORK PERMITS, HOT WORK DISPENSATIONS & GAS FREE CERTIFICATES PROCEDURES FOR HOT WORK PERMITS, HOT WORK DISPENSATIONS & GAS FREE CERTIFICATES Hot work permits, hot work dispensations and gas free certificates Version 9 - Aug 2015 Page 1 of 13 DOCUMENT CONTROL Document

More information

STANDARD PROCEDURE INSTRUCTION

STANDARD PROCEDURE INSTRUCTION STANDARD PROCEDURE INSTRUCTION Title SPI Department Hot Work Permit Supersedes SPI Dated # 34-3 Effective Date Safety, Health and Environment Dec 22, 2014 Jan 19, 2016 Hot Work Permit 1. PURPOSE 1.1 To

More information

Fire safety basics for hot work operatives. CFPA-E Guideline No 12:2012 F

Fire safety basics for hot work operatives. CFPA-E Guideline No 12:2012 F Fire safety basics for hot work operatives CFPA-E Guideline No 12:2012 F FOREWORD The European fire protection associations have decided to produce common guidelines in order to achieve similar interpretation

More information

CP Motors Storage Terms & Conditions (2014)

CP Motors Storage Terms & Conditions (2014) CP Motors Storage Terms & Conditions (2014) You may have other rights granted by law in addition to those set out in these terms and conditions which We may not exclude. These terms and conditions do not

More information

WORKPLACE SAFETY AND HEALTH ACT (CHAPTER 354A) WORKPLACE SAFETY AND HEALTH (WORK AT HEIGHTS) REGULATIONS 2013

WORKPLACE SAFETY AND HEALTH ACT (CHAPTER 354A) WORKPLACE SAFETY AND HEALTH (WORK AT HEIGHTS) REGULATIONS 2013 WORKPLACE SAFETY AND HEALTH ACT (CHAPTER 354A) WORKPLACE SAFETY AND HEALTH (WORK AT HEIGHTS) REGULATIONS 2013 In exercise of the powers conferred by section 65 of the Workplace Safety and Health Act, Mr

More information

CHAPTER 220 THE FACTORIES ACT. Arrangement of Sections.

CHAPTER 220 THE FACTORIES ACT. Arrangement of Sections. CHAPTER 220 THE FACTORIES ACT. Arrangement of Sections. Section PART I APPLICATION OF ACT. 1. General application of Act. 2. Application to factories belonging to Government. 3. Power to exempt in case

More information

Hot Work and Welding Management Procedures Attached to FIN-INS Introduction. 1.1 Purpose

Hot Work and Welding Management Procedures Attached to FIN-INS Introduction. 1.1 Purpose 1. Introduction 1.1 Purpose Hot Work and Welding Management Procedures Attached to FIN-INS-22 Indiana University Insurance, Loss Control and Claims (INLOCC) and Indiana University Environmental Health

More information

SAFETY. EHS Pledge Vol 3 Issue 3 March 2017 RESPONSIBILITY. is everyone s STAY ALERT! Never dismiss a NEAR MISS

SAFETY. EHS Pledge Vol 3 Issue 3 March 2017 RESPONSIBILITY. is everyone s STAY ALERT! Never dismiss a NEAR MISS EHS Pledge Vol 3 Issue 3 March 2017 Accidents occur when we don t care SAFETY is everyone s RESPONSIBILITY Never dismiss a NEAR MISS A near miss is described as an unplanned event that did not result in

More information

HEALTH & SAFETY HOT WORK INSTRUCTIONS

HEALTH & SAFETY HOT WORK INSTRUCTIONS HEALTH & SAFETY HOT WORK INSTRUCTIONS 1. RISK ASSESSMENT 1.1 Requirements The hot work authoring officer (HW authorising officer), in conjunction with the employee/contractor conducting the hot work activity

More information

HSE - Permit to Work Procedure

HSE - Permit to Work Procedure Date Adopted: April 2016 Current Date: August 2016 Due for Review: August 2018 Division: HSE HSE - Permit to Work Procedure 1. SCOPE... 2 2. DEFINITIONS... 3 3. RESPONSIBILITIES... 5 4. PROCEDURE... 6

More information

BUILDING MAINTENANCE (STRATA MANAGEMENT) REGULATIONS SECOND SCHEDULE PRESCRIBED BY-LAWS

BUILDING MAINTENANCE (STRATA MANAGEMENT) REGULATIONS SECOND SCHEDULE PRESCRIBED BY-LAWS BUILDING MAINTENANCE (STRATA MANAGEMENT) REGULATIONS SECOND SCHEDULE PRESCRIBED BY-LAWS Regulations 20 and 21 Noise 1. A subsidiary proprietor or an occupier of a lot shall not create any noise on a lot

More information

HOT / COLD WORK PERMIT DIRECTIONS NFPA 51B /306 NAVSEA Standard Item Box Title Instructions Examples

HOT / COLD WORK PERMIT DIRECTIONS NFPA 51B /306 NAVSEA Standard Item Box Title Instructions Examples General Instructions: NOTE: For all sections fill in the appropriate information. Print legibly or type information into the form. This notice is effective for 24 hours unless a shorter period of time

More information

DRAFT Hot Work Procedure South Shore Regional School Board

DRAFT Hot Work Procedure South Shore Regional School Board Hot Work Procedure South Shore Regional School Board SSRSB Hot Work Procedure - 2010 Page 1 of 12 Introduction DRAFT Hot work comes in a variety of applications each with its own heat source severity.

More information

Hot Work Permit Guidelines

Hot Work Permit Guidelines 2408 Wanda Daley Drive Ames, Iowa 50011-3602 (515) 294-5359 www.ehs.iastate.edu Copyright 2014 Reviewed 2015 2 Hot Work Permit Guidelines Directory of Service and Emergency Providers Services Environmental

More information

SAINT LUCIA EMPLOYEES (OCCUPATIONAL HEALTH AND SAFETY) ACT CHAPTER Revised Edition Showing the law as at 31 December 2001

SAINT LUCIA EMPLOYEES (OCCUPATIONAL HEALTH AND SAFETY) ACT CHAPTER Revised Edition Showing the law as at 31 December 2001 SAINT LUCIA EMPLOYEES (OCCUPATIONAL HEALTH AND SAFETY) ACT CHAPTER 16.02 Revised Edition Showing the law as at 31 December 2001 Act 10 of 1985 in force 10 December 1985 (S.I.93/1985) ARRANGEMENT OF SECTIONS

More information

Health and Safety Policy

Health and Safety Policy Corporate Permit to Work SOP Document Control Summary Status: Version: Author/Title: Owner/Title: Approved by: Ratified: Related Trust Strategy and/or Strategic Aims Implementation Date: Review Date: Key

More information

RUTGERS UNIVERSITY HOT WORK PERMIT PROGRAM

RUTGERS UNIVERSITY HOT WORK PERMIT PROGRAM RUTGERS UNIVERSITY HOT WORK PERMIT PROGRAM REV 10/2015 TABLE OF CONTENTS HOT WORK PERMIT PROGRAM Contents A. PURPOSE AND SCOPE... 3 B. HOT WORK PERMIT PROCEDURES... 3 C. HOT WORK PERMIT PROHIBITED CONDITIONS:...

More information

University of Arizona AMENDMENTS TO THE INTERNATIONAL FIRE CODE 2012 EDITION

University of Arizona AMENDMENTS TO THE INTERNATIONAL FIRE CODE 2012 EDITION University of Arizona AMENDMENTS TO THE INTERNATIONAL FIRE CODE 2012 EDITION The following provisions of the International Fire Code, 2012 Edition, as published by the International Code Council, Inc.

More information

HOT WORK PERMIT PROGRAM AUBURN UNIVERSITY RISK MANAGEMENT & SAFETY

HOT WORK PERMIT PROGRAM AUBURN UNIVERSITY RISK MANAGEMENT & SAFETY HOT WORK PERMIT PROGRAM AUBURN UNIVERSITY RISK MANAGEMENT & SAFETY WHAT IS HOT WORK? WORK INVOLVING BURNING, WELDING, OR A SIMILAR OPERATION THAT IS CAPABLE OF INITIATING FIRES OR EXPLOSIONS. EXAMPLES

More information

Dangers of Hot Work: Key Lessons from CSB Investigations

Dangers of Hot Work: Key Lessons from CSB Investigations 2017 NFPA Conference & Expo Dangers of Hot Work: Key Lessons from CSB Investigations Presented by: Samuel A. Oyewole, PhD. Office of Investigations U.S. Chemical Safety Board Washington, DC 1 Disclaimer

More information

Hot Work Procedure. Work Health and Safety Policy Responsible Officer. Executive Director, Infrastructure Services and Development Approved by

Hot Work Procedure. Work Health and Safety Policy Responsible Officer. Executive Director, Infrastructure Services and Development Approved by Hot Work Procedure Related Policy Work Health and Safety Policy Responsible Officer Executive Director, Infrastructure Services and Development Approved by Executive Director, Infrastructure Services and

More information

HOT WORK PERMIT PROGRAM AUBURN UNIVERSITY SAFETY AND HEALTH RISK MANAGEMENT AND SAFETY

HOT WORK PERMIT PROGRAM AUBURN UNIVERSITY SAFETY AND HEALTH RISK MANAGEMENT AND SAFETY HOT WORK PERMIT PROGRAM AUBURN UNIVERSITY SAFETY AND HEALTH RISK MANAGEMENT AND SAFETY WORK INVOLVING BURNING, WELDING, OR A SIMILAR OPERATION THAT IS CAPABLE OF INITIATING FIRES OR EXPLOSIONS. WHAT IS

More information

INDUSTRIAL SAFETY AND HEALTH ACT Act No. 4220, Jan. 13, 1990

INDUSTRIAL SAFETY AND HEALTH ACT Act No. 4220, Jan. 13, 1990 INDUSTRIAL SAFETY AND HEALTH ACT Act No. 4220, Jan. 13, 1990 Amended by Act No. 4622, Dec. 27, 1993 Act No. 4826, Dec. 22, 1994 Act No. 4916, Jan. 5, 1995 Act No. 5248, Dec. 31, 1996 Act No. 5453, Dec.

More information

PRO Hot Work

PRO Hot Work MS&L Procedure PRO-4.5-0001-1-07 Hot Work Document Owner: Bill Kruesi HSSE Manager - Asset Mgmt. Owen Quake ANZ Engineering Authority Approved By: Bill Kruesi HSSE Manager - Asset Mgmt. Control of Work

More information

Municipal Ticket Information Utilization Bylaw No. 1598, 2012 adopted May 28, 2012

Municipal Ticket Information Utilization Bylaw No. 1598, 2012 adopted May 28, 2012 Municipal Ticket Information Utilization Bylaw No. 1598, 2012 adopted May 28, 2012 CONSOLIDATED FOR CONVENIENCE ONLY Includes amendments adopted up to October 9, 2018 Bylaw No. 1598, 2012 (CONSOLIDATION)

More information

Chapter 113 FIRE PREVENTION

Chapter 113 FIRE PREVENTION Chapter 113 FIRE PREVENTION ARTICLE I Fire Prevention Code 113-1. Adoption of standards. 113-2. Enforcing official. 113-3. Limits for certain uses established. 113-4. Amendments to standards. 113-5. Modifications.

More information

PRO Hot Work

PRO Hot Work MS&L Procedure PRO-4.5-0001-1-07 Hot Work Version: 3 Authorised by: Tom Angliss & Owen Quake Authorisation Date: 21/11/2017 This document has been approved for release and changed as per the associated

More information

RUTGERS UNIVERSITY HOT WORK PERMIT PROGRAM

RUTGERS UNIVERSITY HOT WORK PERMIT PROGRAM RUTGERS UNIVERSITY HOT WORK PERMIT PROGRAM REV 12/99 1 TABLE OF CONTENTS HOT WORK PERMIT PROGRAM A. Purpose and Scope.3 B. Hot Work Permit Procedures...3 C. Hot Work Permit - Prohibited Conditions...4

More information

Guide to Hot Work NFPA 51B Understanding the new requirements after July 1, 2018

Guide to Hot Work NFPA 51B Understanding the new requirements after July 1, 2018 Guide to Hot Work NFPA 51B Understanding the new requirements after July 1, 2018 What is the issue that caused the change? Unpermitted hot work was determined to be the cause of a fire that killed two

More information

University Environmental Health and Safety. Hot Work Permit Program

University Environmental Health and Safety. Hot Work Permit Program University Environmental Health and Safety Hot Work Permit Program 1 2 TABLE OF CONTENTS Section Title Page 1.0 Scope 3 2.0 Standards and Regulations Involved/Target Groups 3 3.0 Responsibilities 4 4.0

More information

TITLE 2 BUILDING AND FIRE REGULATION

TITLE 2 BUILDING AND FIRE REGULATION TITLE 2 BUILDING AND FIRE REGULATION Chapter 2-1: International Building Code Chapter 2-2: General Building Regulations Chapter 2-3: National Electrical Code and Regulations Chapter 2-4: National Plumbing

More information

HOT WORK PROGRAM October 2016

HOT WORK PROGRAM October 2016 HOT WORK PROGRAM October 2016 A. SCOPE AND APPLICATION The UNLV Hot Work Program is established in accordance with the standards listed in Section H and specifies the requirements and procedures necessary

More information

TOXIC CHEMICALS CONTROL ACT

TOXIC CHEMICALS CONTROL ACT TOXIC CHEMICALS CONTROL ACT Reproduced from statutes of Republic of Korea Copyright 1997 by the Korea Legislation Research Institute, Seoul, Korea TOXIC CHEMICALS CONTROL ACT Wholly Amended by Act No.

More information

PURPOSE To specify the minimum requirements for controlling risks associated with Hot Work activities.

PURPOSE To specify the minimum requirements for controlling risks associated with Hot Work activities. PURPOSE To specify the minimum requirements for controlling risks associated with Hot Work activities. 1 SCOPE This procedure defines Hot Work as any activity that may introduce a source of ignition or

More information

TITLE 12 BUILDING, UTILITY, ETC. CODES 1

TITLE 12 BUILDING, UTILITY, ETC. CODES 1 Change 2, September 15, 2015 12-1 TITLE 12 BUILDING, UTILITY, ETC. CODES 1 CHAPTER 1. BUILDING CODE. 2. PLUMBING CODE. 3. FUEL GAS CODE. 4. ENERGY CONSERVATION CODE. 5. MECHANICAL CODE. 6. RESIDENTIAL

More information

Motaleb Monowara Composite Ltd DBID (25241) CAP B Audit Date: 01/03/2015 Audit Type: Re Audit Score: Improvements Needed. Responsible Person

Motaleb Monowara Composite Ltd DBID (25241) CAP B Audit Date: 01/03/2015 Audit Type: Re Audit Score: Improvements Needed. Responsible Person Motaleb Monowara Composite Ltd DBID (25241) CAP B Audit Date: 01/03/2015 Audit Type: Re Audit Score: Improvements Needed Chapter Subchapter Crucial Score CAP B.2. Documentation B.2.1. Documentation Full

More information

LAWS OF SOLOMON ISLANDS CHAPTER 74 SAFETY AT WORK ARRANGEMENT OF SECTIONS PART I INTRODUCTORY PART II GENERAL DUTIES

LAWS OF SOLOMON ISLANDS CHAPTER 74 SAFETY AT WORK ARRANGEMENT OF SECTIONS PART I INTRODUCTORY PART II GENERAL DUTIES 1996 Edition] LAWS OF SOLOMON ISLANDS CHAPTER 74 SAFETY AT WORK ARRANGEMENT OF SECTIONS PART I INTRODUCTORY SECTION 1. SHORT TITLE 2. MEANING OF "EMPLOYER" AND "EMPLOYEE" 3. MEANING OF "WORKPLACE" PART

More information

BYLAW #797A OF THE TOWN OF KILLAM IN THE PROVINCE OF ALBERTA

BYLAW #797A OF THE TOWN OF KILLAM IN THE PROVINCE OF ALBERTA BYLAW #797A OF THE TOWN OF KILLAM IN THE PROVINCE OF ALBERTA BEING A BYLAW OF THE TOWN OF KILLAM IN THE PROVINCE OF ALBERTA, TO PROVIDE FOR THE PREVENTION, REGULATION AND CONTROL OF THE LIGHTING OF FIRES

More information

STRATA SCHEMES MANAGEMENT ACT (1996) Schedule 1 BY-LAWS

STRATA SCHEMES MANAGEMENT ACT (1996) Schedule 1 BY-LAWS 1 of 6 STRATA SCHEMES MANAGEMENT ACT (1996) Schedule 1 BY-LAWS 1 Noise An owner or occupier of a lot must not create any noise on the parcel likely to interfere with the peaceful enjoyment of the owner

More information

Hot Work. A printed or saved copy is an UNCONTROLLED copy. Check that it is the latest available version before use. Full Review of Document

Hot Work. A printed or saved copy is an UNCONTROLLED copy. Check that it is the latest available version before use. Full Review of Document A printed or saved copy is an UNCONTROLLED copy. Check that it is the latest available version before use. Title: Number: HOT WORK GM-11-036-06 Version Number: 10.0 Date Revised: 11 June 2015 Owner: Authoriser:

More information

105 CMR: DEPARTMENT OF PUBLIC HEALTH

105 CMR: DEPARTMENT OF PUBLIC HEALTH 105 CMR 123.000: TANNING FACILITIES Section Purpose and Scope Definitions Operation of Tanning Facilities Inspections Application for a License Issuance of a License Renewal of a License Report of Changes

More information

Hot Work Program. SUNY Canton. Purpose

Hot Work Program. SUNY Canton. Purpose SUNY Canton Hot Work Program Purpose Hot Work is defined as welding, thermite welding, thermal spraying, installation of torch applied roof systems, cutting, soldering, brazing, grinding, thawing pipe

More information