from 500 to 5000 RPM GEAR PUMPS P23
|
|
- Randolph McGee
- 5 years ago
- Views:
Transcription
1 Displacement Pressure Speed from 0,80 to 11,80 ccm up to 310 bar from 500 to 5000 PM GEA PUMPS P23
2 Table of Contents P23 TABE OF CONTENTS DESCIPTION... 2 BASIC PATS... 2 PAAMET TABE... 3 FOMUAS USED FO CACUATION... 4 PUMP EFFICIENCIES... 4 WOKING IQUID... 5 PESSUE OAD... 5 DIECTION OF OTATION... 6 EVESIBE DESIGN... 6 PŮTOKOVÉ A VÝKONOVÉ CHAAKTEISTIKY... 7 ODE KEY SINGE VESION ODE KEY MUTIPE VESION COMBINATION OF FANGES AND SHAFTS FANGE DESIGN DIVE SHAFTS COMBINATION OF IQUID INETS AND OUTETS CATAOGUE SHEETS OF P23 SEIES BASIC DESIGN version 01/2014 1
3 P23 DESCIPTION Basic Description P23 line pumps are designed for advanced hydraulic systems with lower capacity (approximately up to 10 kw) with high operational reliability and long service life. They have been produced in both one-way and reversible version with internal or external drainage. A wide variety of designs with diverse drives, connecting flanges, fluid inlets and outlets enable the pumps to be used in hydraulic systems of both fixed and mobile machines and equipment. They are available in a special version modified for small hydraulic aggregates, too. Types of connections and flanges as well as the other connecting dimensions correspond to all worldwide standards. P23 line pumps are also available as multiple versions (2 sections, 3 sections, etc.) with separate inlets of working fluid into individual sections or with one common inlet. Individual sections can be sealed from each other. The pumps are made of high-quality aluminum alloys with steel gear-wheels and they are equipped with hydraulic axial play compensation of new generation. Compared with the previous versions P and P2, the pressure and noise parameters as well as the effectivity in the entire range of speed have been improved. As for their dimensions, P23 pumps are fully interchangeable with P and P2 pumps. BASIC PATS 1. Body 8. Shaft seal 2. Flange 9. Bearing sleeves 3. Cover 10. Nut 4. Driving gear 11. Safety ring 5. Driven gear 12. Connection bolts 6. Balancing sealing 13. Spring washer 7. Sealing protective plate 14. Woodruff key 2 version 01/2014
4 PAAMET TABE Basic Description P23 P23 P23 P23 P23 P23 P23 P23 Nominal Size Parametrs Sym. Unit 0,8 1,2 1,6 2,1 2,5 3,3 3,6 Actual displacement V g [cm 3 /rev] 0,855 1,257 1,686 2,086 2,514 3,316 3,611 otation speed Pressure at inlet * Pressure at outlet ** nominal n n [min -1 ] 1500 minimum n min [min -1 ] maximum n max [min -1 ] minimum p 1min [bar] -0,3 maximum p 1max [bar] 0,5 max. continuous p 2n [bar] maximum p 2max [bar] peak p 3 [bar] Nominal flow rate (min.) at n n and p 2n Q n [dm 3.min -1 ] 1,07 1,6 2,13 2,71 3,35 4,54 4,98 Maximum flow rate at n max and p 2max Q max [dm 3.min -1 ] 3,92 5,88 7,06 9,26 9,80 12,94 14,11 Nominal input power (max.) at n n and p 2n P n [kw] 0,7 1,04 1,39 1,72 2,07 2,97 3,35 Maximum input power at n max and p 2max P max [kw] 2,51 3,7 4,96 5,52 6,65 7,8 7,93 Weight m [kg] 0,82 0,84 0,85 0,87 0,89 0,92 0,93 P23 P23 P23 P23 P23 P23 Nominal Size Parametrs Sym. Unit 4,4 4,8 5,8 6,2 7,9 11,8 Actual displacement V g [cm 3 /rev] 4,386 4,787 5,804 6,205 7,890 11,795 otation speed Pressure at inlet * Pressure at outlet ** nominal n n [min -1 ] 1500 minimum n min [min -1 ] 500 maximum n max [min -1 ] minimum p 1min [bar] -0,30 maximum p 1max [bar] 0,50 max. continuous p 2n [bar] maximum p 2max [bar] peak p 3 [bar] Nominal flow rate (min.) at n n and p 2n Q n [dm 3.min -1 ] 6,06 6,61 8,00 8,56 10,90 16,30 Maximum flow rate at n max and p 2max Q max [dm 3.min -1 ] 17,25 17,88 21,60 21,27 23,23 20,82 Nominal input power (max.) at n n and p 2n P n [kw] 3,23 3,24 3,41 3,29 3,71 3,47 Maximum input power at n max and p 2max P max [kw] 9,29 8,29 9,51 8,52 8,35 2,64 Weight m [kg] 0,96 0,98 1,02 1,04 1,10 1,25 P23 P23 P23 P23 P23 P23 Nominal Size Parametrs Sym. Unit 1,0 2,3 2,65 6,4 7,0 10,0 Actual displacement V g [cm 3 /rev] 1,016 2,301 2,674 6,419 7,007 10,003 otation speed Pressure at inlet * Pressure at outlet ** nominal n n [min -1 ] 1500 minimum n min [min -1 ] maximum n max [min -1 ] minimum p 1min [bar] -0,30 maximum p 1max [bar] 0,50 max. continuous p 2n [bar] maximum p 2max [bar] peak p 3 [bar] Nominal flow rate (min.) at n n and p 2n Q n [dm 3.min -1 ] 1,28 3,12 3,62 8,85 9,65 13,90 Maximum flow rate at n max and p 2max Q max [dm 3.min -1 ] 4,90 10,14 11,69 21,95 20,58 17,64 Nominal input power (max.) at n n and p 2n P n [kw] 0,84 1,89 2, 20 3,40 3,50 2,94 Maximum input power at n max and p 2max P max [kw] 2,99 6,09 7,08 8,81 7,83 5,30 Weight m [kg] 0,83 0,88 0,90 1,05 1,08 1,20 * Inlet pressure in the reversible design can be up to p 1 = p 2n -70 bar max. External drainage must be used in case of the reversible design. ** Outlet pressure in the reversible design is 10% lower than shown in the table (depending on operating conditions - it is necessary to consult with the manufacturer). version 01/2014 3
5 P23 Basic Description FOMUAS USED FO CACUATION Flow rate V g n Q [dm 3 min -1 ] V g [cm 3 ] pump displacement 1000 v n [min -1 ] rotation speed η v [-] volumetric efficiency Displacement V g Q 1000 n V [cm 3 ] Torque M k Vg p [Nm] p [bar] required pressure at outlet 20 m η m [-] mechanical efficiency Input power Vg n p P t [kw] η t [-] total efficiency PUMP EFFICIENCIES Volumetric efficiency η v It determines the amount of flow losses. Its value is η v = (depending on rotation speed, viscosity of working liquid and outlet pressure). It can be expressed as follows: η v = Q Q act. theor. [-] Q act. [dm 3 min -1 ] actual flow rate Q theor [dm 3 min -1 ] theoretical flow rate Mechanical efficiency η m It determines mechanical losses. Its value is about η m = It can be expressed as follows: η m = M M theor act. [-] M act. [Nm] actual torque M theor [Nm] theoretical torque Total efficiency η t It is defined as product of η v and η m and determines difference between theoretical and actual required input power: P theor t v m [-] P act. [kw] actual input power Pact P theor [kw] theoretical input power 4 version 01/2014
6 WOKING IQUID Basic Description P23 - Mineral oils for hydraulic drives - Hydraulic liquids based on vegetable oils suitable for hydraulic drives iquid temperature t = [ C] when used with FKM (Viton) seal up to 120 [ C] Cinematic viscosity ecommended (during continuous operation): = [m 2 s -1 ] Maximum (cold starting, at viscosity >1000, operating = [m 2 s -1 ] pressure <10 bar is permissible, speed <1500 min -1 ): Minimum (operating mode at up to should be consulted with manufacturer): = [m 2 s -1 ] Filtration coefficient (for pressure p bar) (for pressure p bar) iquid contamination class according to ISO /18/15 (for pressure p bar) 20/17/14 (for pressure p bar) iquid contamination class according to NAS (for pressure p bar) 8 (for pressure p bar) PESSUE OAD p 2n max. contin. pressure max. working pressure, at which the pump can be operated without time limitation. p 2max max. pressure maximum pressure permissible for a short time, max. 20s. p 3 peak pressure short-time pressure (fractions of a second) arising in case of a sudden change of the operating mode; any excess of this pressure during operation is impermissible. version 01/2014 5
7 P23 Basic Description DIECTION OF OTATION Determine direction of rotation by looking at the drive shaft. The pump can only be used in the specified direction of rotation. EVESIBE DESIGN The pumps with the possibility of bidirectional rotation have a different internal arrangement requiring drainage. Two types of drain are used - internal and external. The internal drainage is always interconnected with the outlet by means of valves. The external drainage is solved by an orifice located in the cover opposite the driven gear (see. picture below). 6 version 01/2014
8 PŮTOKOVÉ A VÝKONOVÉ CHAAKTEISTIKY Basic Description P23 version 01/2014 7
9 P23 Basic Description Above curves apply to ISO Vg 46 oil at temperature t = 45 C. 8 version 01/2014
10 Basic Description P23 version 01/2014 9
11 P23 Basic Description 10 version 01/2014
12 Ákladní popis ODE KEY SINGE VESION Order Key P23 Example of designation for the anti-clockwise pump P23 with displacement of 4,4 cm 3 /rev, SAE A flange, traper 1:8 with key 2,5x3,7, BSP side inlets and standard NB seal without special arrangements: P23-4,4-S1C1-SG03G03-N version 01/
13 P23 Order Key ODE KEY MUTIPE VESION Example of designation for the two-section clockwise pump P23 with displacements of 4,4 and 3,3 cm 3, rectangular flange, centre ring 25,4, Traper 1:8 with key 2,4x5 13, one common input and to outputs with metric threads, FKM sealing without special arrangemets: P23 4,4/3,3 1C2 SM05M05/NM05 V 12 version 01/2014
14 Design of Flange, Drive Shaft and inlets and Outlets COMBINATION OF FANGES AND SHAFTS FANGE DESIGN 1 S1 A1 A2 A3 A4 P23 DIVE SHAFTS C1 C2 C3 K1 K2 V1 V2 V3 V4 D1 - SUGGESTED - POSSIBE version 01/
15 P23 Design of Flange, Drive Shaft and Inlets and Outlets FANGE DESIGN 1: S1: A1: A2: A3: A4: 14 version 01/2014
16 DIVE SHAFTS Design of Flange, Drive Shaft and inlets and Outlets P23 C1 C2: C3: D1: K1: K2: version 01/
17 P23 Design of Flange, Drive Shaft and Inlets and Outlets V1: V2: V3: V4: 16 version 01/2014
18 COMBINATION OF IQUID INETS AND OUTETS Metric thread according to ISO 6149 BSPP pipe thread according to Design of Flange, Drive Shaft and inlets and Outlets P23 Displacement Inlet Outlet [cm 3 Code Code ] A B C D A B C D A M02 M 12x1, M03 M 14x1, ,8-3,3 M03 M 14x1, A M04 M 16x1, M04 M 16x1, A M05 M 18x1, M05 M 18x1, A M06 M 20x1, M02 M05 3,3-11,8 M07 M 22x1, DAIN M01 M 10x Displacement [cm 3 ] A Inlet Outlet Code Code A B C D A B C D G01 G 1/4 26 G02 G 3/ G02 G 3/ G03 G 1/2 34 G03 G 1/2 34 UNF thread according SAE Displacement [cm 3 ] A Inlet Outlet Code Code A B C D A B C D 9/16-18 U02 24,6 U03 3/4-16 UNF 13 24,6 UNF U03 3/4-16 UNF 30 U04 7/8-14 UNF Flanged fittings according to DIN 8901/8902 Displacement [cm 3 ] A Code Inlet Code Outlet E F G E F G H01 8 H01 8 M5, depth M5, depth 12 H02 10 H H03 8 H03 8 M6, depth M6, depth 12 H04 12 H NOTE: All inlets and outlets can be combination Inlet / Outlet in flange Code E F G P ,4 1,4 version 01/
19 Gear Pump catologue P23 Catologue Sheets of P23 Series Basic Design CATAOGUE SHEETS OF P23 SEIES BASIC DESIGN P23-7,9-S1V2-SU04U04-N P23-7,9-S1V2-SU04U04-N 7, ,8 95,6 7/8-14 UNF-2B Ø 34,2 7/8-14 UNF-2B Ø 34,2 P23-6,2-S1V2-SU04U04-N P23-6,2-S1V2-SU04U04-N 6, ,6 89,3 7/8-14 UNF-2B Ø 34,2 7/8-14 UNF-2B Ø 34,2 P23-5,8-S1V2-SU04U04-N P23-5,8-S1V2-SU04U04-N 5, ,9 87,8 7/8-14 UNF-2B Ø 34,2 7/8-14 UNF-2B Ø 34,2 P23-4,8-S1V2-SU04U04-N P23-4,8-S1V2-SU04U04-N 4, ,0 84,0 7/8-14 UNF-2B Ø 34,2 7/8-14 UNF-2B Ø 34,2 P23-4,4-S1V2-SU04U04-N P23-4,4-S1V2-SU04U04-N 4, ,2 82,5 7/8-14 UNF-2B Ø 34,2 7/8-14 UNF-2B Ø 34,2 P23-3,6-S1V2-SU04U04-N P23-3,6-S1V2-SU04U04-N 3, ,8 79,6 7/8-14 UNF-2B Ø 34,2 7/8-14 UNF-2B Ø 34,2 P23-3,3-S1V2-SU04U04-N P23-3,3-S1V2-SU04U04-N 3, ,2 78,5 7/8-14 UNF-2B Ø 34,2 7/8-14 UNF-2B Ø 34,2 P23-2,5-S1V2-SU03U03-N P23-2,5-S1V2-SU03U03-N 2, ,7 75,5 3/4-16 UNF-2B Ø 30,2 3/4-16 UNF-2B Ø 30,2 P23-2,1-S1V2-SU03U03-N P23-2,1-S1V2-SU03U03-N 2, ,9 73,9 3/4-16 UNF-2B Ø 30,2 3/4-16 UNF-2B Ø 30,2 P23-1,6-S1V2-SU03U03-N P23-1,6-S1V2-SU03U03-N 1, ,1 72,3 3/4-16 UNF-2B Ø 30,2 3/4-16 UNF-2B Ø 30,2 P23-1,2-S1V2-SU03U03-N P23-1,2-S1V2-SU03U03-N 1, ,4 70,8 3/4-16 UNF-2B Ø 30,2 3/4-16 UNF-2B Ø 30,2 P23-0,8-S1V2-SU03U03-N P23-0,8-S1V2-SU03U03-N 0, ,6 69,3 3/4-16 UNF-2B Ø 30,2 3/4-16 UNF-2B Ø 30,2 ODE PUCH. DIECT. DISPA- NOM.. MIN. MAX. A B C D E F KEY CODE OF OT. CEMENT PESS. SPEED DIMENSION [cm 3 /rev] [bar] [min -1 ] [mm] 18 version 01/2014
20 Ákladní popis Catalogue Sheets of P23 Series Basic Design P23 P23-7,9-1C1-SG02G02-N P23-7,9-1C1-SG02G02-N P23-6,2-1C1-SG02G02-N P23-6,2-1C1-SG02G02-N P23-5,8-1C1-SG02G02-N P23-5,8-1C1-SG02G02-N P23-4,8-1C1-SG02G02-N P23-4,8-1C1-SG02G02-N P23-4,4-1C1-SG02G02-N P23-4,4-1C1-SG02G02-N P23-3,6-1C1-SG02G02-N P23-3,6-1C1-SG02G02-N P23-3,3-1C1-SG02G02-N P23-3,3-1C1-SG02G02-N P23-2,5-1C1-SG02G02-N P23-2,5-1C1-SG02G02-N P23-2,1-1C1-SG02G02-N P23-2,1-1C1-SG02G02-N P23-1,6-1C1-SG02G02-N P23-1,6-1C1-SG02G02-N P23-1,2-1C1-SG02G02-N P23-1,2-1C1-SG02G02-N P23-0,8-1C1-SG02G02-N P23-0,8-1C1-SG02G02-N 7, ,8 95,6 G 3/8 Ø 24 G 3/8 Ø 24 6, ,6 89,3 G 3/8 Ø 24 G 3/8 Ø 24 5, ,9 87,8 G 3/8 Ø 24 G 3/8 Ø 24 4, ,0 84,0 G 3/8 Ø 24 G 3/8 Ø 24 4, ,2 82,5 G 3/8 Ø 24 G 3/8 Ø 24 3, ,8 79,6 G 3/8 Ø 24 G 3/8 Ø 24 3, ,2 78,5 G 3/8 Ø 24 G 3/8 Ø 24 2, ,7 75,5 G 3/8 Ø 24 G 3/8 Ø 24 2, ,9 73,9 G 3/8 Ø 24 G 3/8 Ø 24 1, ,1 72,3 G 3/8 Ø 24 G 3/8 Ø 24 1, ,4 70,8 G 3/8 Ø 24 G 3/8 Ø 24 0, ,6 69,3 G 3/8 Ø 24 G 3/8 Ø 24 ODE PUCH. DI. DISPA- NOM. MIN. MAX. A B C D E F KEY CODE OF OT. CEMET PESS. SPEED DIMENSION [cm 3 /rev] [bar] [min -1 ] [mm] version 01/
21 Gear Pump catologue P23 Catologue Sheets of P23 Series Basic Design P23-7,9-1C2-SG02G02-N 7, ,8 95,6 G 3/8 Ø 24 G 3/8 Ø 24 P23-7,9-1C2-SG02G02-N P23-6,2-1C2-SG02G02-N , ,6 89,3 G 3/8 Ø 24 G 3/8 Ø 24 P23-6,2-1C2-SG02G02-N P23-5,8-1C2-SG02G02-N , ,9 87,8 G 3/8 Ø 24 G 3/8 Ø 24 P23-5,8-1C2-SG02G02-N P23-4,8-1C2-SG02G02-N , ,0 84,0 G 3/8 Ø 24 G 3/8 Ø 24 P23-4,8-1C2-SG02G02-N P23-4,4-1C2-SG02G02-N , ,2 82,5 G 3/8 Ø 24 G 3/8 Ø 24 P23-4,4-1C2-SG02G02-N P23-3,6-1C2-SG02G02-N 3, ,8 79,6 G 3/8 Ø 24 G 3/8 Ø 24 P23-3,6-1C2-SG02G02-N P23-3,3-1C2-SG02G02-N , ,2 78,5 G 3/8 Ø 24 G 3/8 Ø 24 P23-3,3-1C2-SG02G02-N P23-2,5-1C2-SG02G02-N , ,7 75,5 G 3/8 Ø 24 G 3/8 Ø 24 P23-2,5-1C2-SG02G02-N P23-2,1-1C2-SG02G02-N , ,9 73,9 G 3/8 Ø 24 G 3/8 Ø 24 P23-2,1-1C2-SG02G02-N P23-1,6-1C2-SG02G02-N , ,1 72,3 G 3/8 Ø 24 G 3/8 Ø 24 P23-1,6-1C2-SG02G02-N P23-1,2-1C2-SG02G02-N , ,4 70,8 G 3/8 Ø 24 G 3/8 Ø 24 P23-1,2-1C2-SG02G02-N P23-0,8-1C2-SG02G02-N , ,6 69,3 G 3/8 Ø 24 G 3/8 Ø 24 P23-0,8-1C2-SG02G02-N ODE PUCH. DI. DISPA- NOM. MIN. MAX. A B C D E F KEY CODE OF OT. CEMENT PESS. SPEED DIMENSION [cm 3 /rev] [bar] [min -1 ] [mm] 20 version 01/2014
22 Ákladní popis Catalogue Sheets of P23 Series Basic Design P23 P23-7,9-1C2-SH04H03-N , ,8 95,6 P23-7,9-1C2-SH04H03-N P23-6,2-1C2-SH04H03-N , ,6 89,3 P23-6,2-1C2-SH04H03-N P23-5,8-1C2-SH04H03-N , ,9 87,8 P23-5,8-1C2-SH04H03-N P23-4,8-1C2-SH04H03-N , ,0 84,0 P23-4,8-1C2-SH04H03-N P23-4,4-1C2-SH04H03-N , ,2 82,5 P23-4,4-1C2-SH04H03-N P23-3,6-1C2-SH04H03-N , ,8 79,6 P23-3,6-1C2-SH04H03-N P23-3,3-1C2-SH04H03-N , ,2 78,5 P23-3,3-1C2-SH04H03-N P23-2,5-1C2-SH04H03-N , ,7 75,5 P23-2,5-1C2-SH04H03-N P23-2,1-1C2-SH04H03-N , ,9 73,9 P23-2,1-1C2-SH04H03-N P23-1,6-1C2-SH04H03-N , ,1 72,3 P23-1,6-1C2-SH04H03-N P23-1,2-1C2-SH04H03-N , ,4 70,8 P23-1,2-1C2-SH04H03-N P23-0,8-1C2-SH04H03-N 0, ,6 69,3 P23-0,8-1C2-SH04H03-N ODE PUCH. DI. DISPA- NOM. MIN. MAX. A B C D E F KEY CODE OF OT. CEMENT PESS. SPEED DIMENSION [cm 3 /rev] [bar] [min -1 ] [mm] version 01/
23 Gear Pump catologue P23 Catologue Sheets of P23 Series Basic Design P23-7,9-1C1-SM07M07-N P23-7,9-1C1-SM07M07-N , ,8 95,6 M22x1,5 Ø 28 M22x1,5 Ø 28 P23-6,2-1C1-SM07M07-N P23-6,2-1C1-SM07M07-N , ,6 89,3 M22x1,5 Ø 28 M22x1,5 Ø 28 P23-5,8-1C1-SM07M05-N P23-5,8-1C1-SM07M05-N , ,9 87,8 M18x1,5 Ø 24 M22x1,5 Ø 28 P23-4,8-1C1-SM05M05-N P23-4,8-1C1-SM05M05-N , ,0 84,0 M18x1,5 Ø 24 M18x1,5 Ø 24 P23-4,4-1C1-SM05M05-N P23-4,4-1C1-SM05M05-N , ,2 82,5 M18x1,5 Ø 24 M18x1,5 Ø 24 P23-3,6-1C1-SM05M05-N P23-3,6-1C1-SM05M05-N , ,8 79,6 M18x1,5 Ø 24 M18x1,5 Ø 24 P23-3,3-1C1-SM05M05-N P23-3,3-1C1-SM05M05-N , ,2 78,5 M18x1,5 Ø 24 M18x1,5 Ø 24 P23-2,5-1C1-SM05M05-N P23-2,5-1C1-SM05M05-N , ,7 75,5 M18x1,5 Ø 24 M18x1,5 Ø 24 P23-2,1-1C1-SM05M05-N P23-2,1-1C1-SM05M05-N , ,9 73,9 M18x1,5 Ø 24 M18x1,5 Ø 24 P23-1,6-1C1-SM03M03-N P23-1,6-1C1-SM03M03-N , ,1 72,3 M14x1,5 Ø 20 M14x1,5 Ø 20 P23-1,2-1C1-SM03M03-N P23-1,2-1C1-SM03M03-N , ,4 70,8 M14x1,5 Ø 20 M14x1,5 Ø 20 P23-0,8-1C1-SM03M03-N P23-0,8-1C1-SM03M03-N , ,6 69,3 M14x1,5 Ø 20 M14x1,5 Ø 20 ODE PUCH. DIECT DISPA- NOM. MIN. MAX. A B C D E F KEY CODE OF OT. CEMENT PESS. SPEED DIMENSION [cm 3 /rev] [bar] [min -1 ] [mm] 22 version 01/2014
24 Ákladní popis Catalogue Sheets of P23 Series Basic Design P23 P23-7,9-1V4-SG02G02-N P23-7,9-1V4-SG02G02-N P23-6,2-1V4-SG02G02-N P23-6,2-1V4-SG02G02-N P23-5,8-1V4-SG02G02-N P23-5,8-1V4-SG02G02-N P23-4,8-1V4-SG02G02-N P23-4,8-1V4-SG02G02-N P23-4,4-1V4-SG02G02-N P23-4,4-1V4-SG02G02-N P23-3,6-1V4-SG02G02-N P23-3,6-1V4-SG02G02-N P23-3,3-1V4-SG02G02-N P23-3,3-1V4-SG02G02-N P23-2,5-1V4-SG02G02-N P23-2,5-1V4-SG02G02-N P23-2,1-1V4-SG02G02-N P23-2,1-1V4-SG02G02-N P23-1,6-1V4-SG02G02-N P23-1,6-1V4-SG02G02-N P23-1,2-1V4-SG02G02-N P23-1,2-1V4-SG02G02-N P23-0,8-1V4-SG02G02-N P23-0,8-1V4-SG02G02-N 7, ,8 95,6 G 3/8 Ø 24 G 3/8 Ø 24 6, ,6 89,3 G 3/8 Ø 24 G 3/8 Ø 24 5, ,9 87,8 G 3/8 Ø 24 G 3/8 Ø 24 4, ,0 84,0 G 3/8 Ø 24 G 3/8 Ø 24 4, ,2 82,5 G 3/8 Ø 24 G 3/8 Ø 24 3, ,8 79,6 G 3/8 Ø 24 G 3/8 Ø 24 3, ,2 78,5 G 3/8 Ø 24 G 3/8 Ø 24 2, ,7 75,5 G 3/8 Ø 24 G 3/8 Ø 24 2, ,9 73,9 G 3/8 Ø 24 G 3/8 Ø 24 1, ,1 72,3 G 3/8 Ø 24 G 3/8 Ø 24 1, ,4 70,8 G 3/8 Ø 24 G 3/8 Ø 24 0, ,6 69,3 G 3/8 Ø 24 G 3/8 Ø 24 ODE PUCH. DI. DISPA- NOM.. MIN. MAX. A B C D E F KEY CODE OF OT. CEMENT PESS. SPEED DIMENSION [cm 3 /rev] [bar] [min -1 ] [mm] version 01/
25 Gear Pump catologue P23 Catologue Sheets of P23 Series Basic Design P23-7,9-A1K1-SG02G02-N , ,8 101,6 G 3/8 Ø 24 G 3/8 Ø 24 P23-7,9-A1K1-SG02G02-N P23-6,2-A1K1-SG02G02-N P23-6,2-A1K1-SG02G02-N P23-5,8-A1K1-SG02G02-N P23-5,8-A1K1-SG02G02-N P23-4,8-A1K1-SG02G02-N P23-4,8-A1K1-SG02G02-N P23-4,4-A1K1-SG02G02-N P23-4,4-A1K1-SG02G02-N P23-3,6-A1K1-SG02G02-N P23-3,6-A1K1-SG02G02-N P23-3,3-A1K1-SG02G02-N P23-3,3-A1K1-SG02G02-N P23-2,5-A1K1-SG02G02-N P23-2,5-A1K1-SG02G02-N P23-2,1-A1K1-SG02G02-N P23-2,1-A1K1-SG02G02-N P23-1,6-A1K1-SG02G02-N P23-1,6-A1K1-SG02G02-N P23-1,2-A1K1-SG02G02-N P23-1,2-A1K1-SG02G02-N P23-0,8-A1K1-SG02G02-N P23-0,8-A1K1-SG02G02-N 6, ,6 95,3 G 3/8 Ø 24 G 3/8 Ø 24 5, ,9 93,8 G 3/8 Ø 24 G 3/8 Ø 24 4, ,0 90,0 G 3/8 Ø 24 G 3/8 Ø 24 4, ,2 88,5 G 3/8 Ø 24 G 3/8 Ø 24 3, ,8 85,6 G 3/8 Ø 24 G 3/8 Ø 24 3, ,2 84,5 G 3/8 Ø 24 G 3/8 Ø 24 2, ,7 81,5 G 3/8 Ø 24 G 3/8 Ø 24 2, ,9 79,9 G 3/8 Ø 24 G 3/8 Ø 24 1, ,1 78,3 G 3/8 Ø 24 G 3/8 Ø 24 1, ,4 76,8 G 3/8 Ø 24 G 3/8 Ø 24 0, ,6 75,3 G 3/8 Ø 24 G 3/8 Ø 24 ODE PUCH. DIECT DISPA- NOM. MIN. MAX. A B C D E F KEY CODE OF OT. CEMENT PESS. SPEED DIMENSION [cm 3 /rev] [bar] [min -1 ] [mm] 24 version 01/2014
26 Ákladní popis Catalogue Sheets of P23 Series Basic Design P23 P23-7,9-A3K1-SG02G02-N P23-7,9-A3K1-SG02G02-N.004 7, ,8 94,6 G 3/8 Ø 24 G 3/8 Ø 24 P23-6,2-A3K1-SG02G02-N P23-6,2-A3K1-SG02G02-N.004 6, ,6 88,3 G 3/8 Ø 24 G 3/8 Ø 24 P23-5,8-A3K1-SG02G02-N P23-5,8-A3K1-SG02G02-N.004 5, ,9 86,8 G 3/8 Ø 24 G 3/8 Ø 24 P23-4,8-A3K1-SG02G02-N P23-4,8-A3K1-SG02G02-N.004 4, ,0 83,0 G 3/8 Ø 24 G 3/8 Ø 24 P23-4,4-A3K1-SG02G02-N P23-4,4-A3K1-SG02G02-N , ,2 81,5 G 3/8 Ø 24 G 3/8 Ø 24 P23-3,6-A3K1-SG02G02-N P23-3,6-A3K1-SG02G02-N.004 3, ,8 78,6 G 3/8 Ø 24 G 3/8 Ø 24 P23-3,3-A3K1-SG02G02-N P23-3,3-A3K1-SG02G02-N.004 3, ,2 77,5 G 3/8 Ø 24 G 3/8 Ø 24 P23-2,5-A3K1-SG02G02-N P23-2,5-A3K1-SG02G02-N , ,7 74,5 G 3/8 Ø 24 G 3/8 Ø 24 P23-2,1-A3K1-SG02G02-N P23-2,1-A3K1-SG02G02-N , ,9 72,9 G 3/8 Ø 24 G 3/8 Ø 24 P23-1,6-A3K1-SG02G02-N P23-1,6-A3K1-SG02G02-N.004 1, ,1 71,3 G 3/8 Ø 24 G 3/8 Ø 24 P23-1,2-A3K1-SG02G02-N P23-1,2-A3K1-SG02G02-N.004 1, ,4 69,8 G 3/8 Ø 24 G 3/8 Ø 24 P23-0,8-A3K1-SG02G02-N P23-0,8-A3K1-SG02G02-N.004 0, ,6 68,3 G 3/8 Ø 24 G 3/8 Ø 24 ODE PUCH DIECT DISPA- NOM. MIN. MAX. A B C D E F KEY CODE OF OT. CEMET PESS. SPEED DIMENSION [cm 3 /rev] [bar] [min -1 ] [mm] version 01/
27 Gear Pump catologue P23 Catologue Sheets of P23 Series Basic Design P23-7,9-A4K2-SG02G02-N P23-7,9-A4K2-SG02G02-N P23-6,2-A4K2-SG02G02-N P23-6,2-A4K2-SG02G02-N P23-5,8-A4K2-SG02G02-N P23-5,8-A4K2-SG02G02-N P23-4,8-A4K2-SG02G02-N P23-4,8-A4K2-SG02G02-N P23-4,4-A4K2-SG02G02-N P23-4,4-A4K2-SG02G02-N P23-3,6-A4K2-SG02G02-N P23-3,6-A4K2-SG02G02-N P23-3,3-A4K2-SG02G02-N P23-3,3-A4K2-SG02G02-N P23-2,5-A4K2-SG02G02-N P23-2,5-A4K2-SG02G02-N P23-2,1-A4K2-SG02G02-N P23-2,1-A4K2-SG02G02-N P23-1,6-A4K2-SG02G02-N P23-1,6-A4K2-SG02G02-N P23-1,2-A4K2-SG02G02-N P23-1,2-A4K2-SG02G02-N P23-0,8-A4K2-SG02G02-N P23-0,8-A4K2-SG02G02-N 7, ,8 94,6 G 3/8 Ø 24 G 3/8 Ø 24 6, ,6 88,3 G 3/8 Ø 24 G 3/8 Ø 24 5, ,9 86,8 G 3/8 Ø 24 G 3/8 Ø 24 4, ,0 83,0 G 3/8 Ø 24 G 3/8 Ø 24 4, ,2 81,5 G 3/8 Ø 24 G 3/8 Ø 24 3, ,8 78,6 G 3/8 Ø 24 G 3/8 Ø 24 3, ,2 77,5 G 3/8 Ø 24 G 3/8 Ø 24 2, ,7 74,5 G 3/8 Ø 24 G 3/8 Ø 24 2, ,9 72,9 G 3/8 Ø 24 G 3/8 Ø 24 1, ,1 71,3 G 3/8 Ø 24 G 3/8 Ø 24 1, ,4 69,8 G 3/8 Ø 24 G 3/8 Ø 24 0, ,6 68,3 G 3/8 Ø 24 G 3/8 Ø 24 ODE PUCH. DIECT DISPA- NOM. MIN. MAX. A B C D E F KEY PUCH OF OT. CEMENT PESS. SPEED DIMENSION [cm 3 /rev] [bar] [min -1 ] [mm] 26 version 01/2014
28 Ákladní popis Catalogue Sheets of P23 Series Basic Design P23 P23-7,9-A2K2-AG02P01-N , ,6 100,6 P23-6,2-A2K2-AG02P01-N , ,3 94,3 P23-5,8-A2K2-AG02P01-N , ,8 92,8 P23-4,8-A2K2-AG02P01-N , ,0 89,0 P23-4,4-A2K2-AG02P01-N , ,5 87,5 P23-3,6-A2K2-AG02P01-N , ,6 84,6 P23-3,3-A2K2-AG02P01-N , ,5 83,5 P23-2,5-A2K2-AG02P01-N , ,5 80,5 P23-2,1-A2K2-AG02P01-N , ,9 78,9 P23-1,6-A2K2-AG02P01-N , ,3 77,3 P23-1,2-A2K2-AG02P01-N , ,8 75,8 P23-0,8-A2K2-AG02P01-N , ,3 74,3 ODE PUCH. DIECT DISPA- NOM. MIN. MAX. A B C D E F KEY CODE OF OT. CEMENT PESS. SPEED DIMENSION [cm 3 /rev] [bar] [min -1 ] [mm] version 01/
29 Gear Pump catologue P23 Catologue Sheets of P23 Series Basic Design 7, ,6 101,6 P23-7,9-A1D1-AG02P01-N , ,3 95,3 P23-6,2-A1D1-AG02P01-N , ,8 93,8 P23-5,8-A1D1-AG02P01-N , ,0 90,0 P23-4,8-A1D1-AG02P01-N , ,5 88,5 P23-4,4-A1D1-AG02P01-N , ,6 85,6 P23-3,6-A1D1-AG02P01-N , ,5 84,5 P23-3,3-A1D1-AG02P01-N , ,5 81,5 P23-2,5-A1D1-AG02P01-N , ,9 79,9 P23-2,1-A1D1-AG02P01-N , ,3 78,3 P23-1,6-A1D1-AG02P01-N , ,8 76,8 P23-1,2-A1D1-AG02P01-N , ,3 75,3 P23-0,8-A1D1-AG02P01-N ODE PUCH. DIECT DISPA- NOM. MIN. MAX. A B C D E F KEY CODE OF OT. CEMENT PESS. SPEED DIMENSION [cm 3 /rev] [bar] [min -1 ] [mm] 28 version 01/2014
30 Ákladní popis Catalogue Sheets of P23 Series Basic Design P23 P23-7,9-A1K1-AG02P01-N , ,6 101,6 P23-6,2-A1K1-AG02P01-N , ,3 95,3 P23-5,8-A1K1-AG02P01-N , ,8 93,8 P23-4,8-A1K1-AG02P01-N , ,0 90,0 P23-4,4-A1K1-AG02P01-N , ,5 88,5 P23-3,6-A1K1-AG02P01-N , ,6 85,6 P23-3,3-A1K1-AG02P01-N , ,5 84,5 P23-2,5-A1K1-AG02P01-N , ,5 81,5 P23-2,1-A1K1-AG02P01-N , ,9 79,9 P23-1,6-A1K1-AG02P01-N , ,3 78,3 P23-1,2-A1K1-AG02P01-N , ,8 76,8 P23-0,8-A1K1-AG02P01-N , ,3 75,3 ODE PUCH. DIECT DISPA- NOM. MIN. MAX. A B C D E F KEY CODE OF OT. CEMENT PESS. SPEED DIMENSION [cm 3 /rev] [bar] [min -1 ] [mm] version 01/
31 Gear Pump catologue P23 Catologue Sheets of P23 Series Basic Design P23-6,2/2,5-1C1-SH04H03/H04H03-N 6,2/2,5 180/ ,6 119,0 158,8 P23-4,8/2,5-1C1-SH04H03/H04H03-N ,8/2,5 230/ ,0 113,7 153,5 P23-3,6/3,6-1C1-SH04H03/H04H03-N ,6/3,6 200/ ,8 111,4 153,2 P23-3,6/2,5-1C1-SH04H03/H04H03-N ,6/2,5 260/ ,8 109,3 149,1 P23-2,5/2,5-1C1-SH04H03/H04H03-N 2,5/2,5 280/ ,7 105,2 145,0 P23-1,2/0,8-1C1-SH04H03/H04H03-N 1,2/0,8 280/ ,4 97,4 134,1 ODE PUCH. DIECT DISPA- NOM. MIN. MAX. A B C D E F G KEY CODE OF OT. CEMENT PESS. SPEED DIMENSION [cm 3 /rev] [bar] [min -1 ] [mm] 30 version 01/2014
32 Ákladní popis Catalogue Sheets of P23 Series Basic Design P23 P23-6,2/2,5-1C1-SM07M07/M05M05-N 6,2/2,5 180/ ,6 119,0 158,8 M22x1,5 Ø 28 M18x1,5 Ø 24 P23-4,8/2,5-1C1-SM05M05/M05M05-N 4,8/2,5 230/ ,0 113,7 153,5 M18x1,5 Ø 24 M18x1,5 Ø 24 P23-3,6/3,6-1C1-SM05M05/M05M05-N ,6/3,6 200/ ,8 111,4 153,2 M18x1,5 Ø 24 M18x1,5 Ø 24 P23-3,6/2,5-1C1-SM05M05/M05M05-N 3,6/2,5 260/ ,8 109,3 149,1 M18x1,5 Ø 24 M18x1,5 Ø 24 P23-2,5/2,5-1C1-SM05M05/M05M05-N 2,5/2,5 280/ ,7 105,2 145,0 M18x1,5 Ø 24 M18x1,5 Ø 24 P23-1,2/0,8-1C1-SM03M03/M03M03-N 1,2/0,8 280/ ,4 97,4 134,1 M14x1,5 Ø 20 M14x1,5 Ø 20 ODE PUCH. DIECT DISPA- NOM. MIN. MAX. A B C D E F G KEY CODE OF OT. CEMENT PESS. SPEED DIMENSION [cm 3 /rev] [bar] [min -1 ] [mm] version 01/
33 Gear Pump catologue P23 Catologue Sheets of P23 Series Basic Design P23-7,9/2,5-A1K1-CG02P01/G02G02G02-N ,9/2,5 160/ ,8 131,4 165,1 G 3/8 Ø 24 G 3/8 Ø 24 P23-7,9/1,2-A1K1-CG02P01/G02G02G02-N 7,9/1,2 160/ ,8 129,0 160,4 G 3/8 Ø 24 G 3/8 Ø 24 P23-6,2/1,6-A1K1-CG02P01/G02G02G02-N ,2/1,6 180/ ,6 123,4 155,6 G 3/8 Ø 24 G 3/8 Ø 24 P23-3,3/4,4-A1K1-CG02P01/G02G02G02-N 3,3/4,4 280/ ,2 117,7 155,0 G 3/8 Ø 24 G 3/8 Ø 24 P23-2,5/4,8-A1K1-CG02P01/G02G02G02-N 2,5/4,8 280/ ,7 115,5 153,5 G 3/8 Ø 24 G 3/8 Ø 24 P23-2,5/4,4-A1K1-CG02P01/G02G02G02-N 2,5/4,4 280/ ,7 114,7 152,0 G 3/8 Ø 24 G 3/8 Ø 24 P23-1,6/6,2-A1K1-CG02P01/G02G02G02-N 1,6/6,2 280/ ,1 115,0 155,6 G 3/8 Ø 24 G 3/8 Ø 24 P23-1,6/5,8-A1K1-CG02P01/G02G02G02-N 1,6/5,8 280/ ,1 114,2 154,1 G 3/8 Ø 24 G 3/8 Ø 24 P23-1,6/4,8-A1K1-CG02P01/G02G02G02-N ,6/4,8 280/ ,1 112,3 150,3 G 3/8 Ø 24 G 3/8 Ø 24 ODE PUCH. DIECT DISPA- NOM MIN. MAX. A B C D E F G KEY CODE OF OT. CEMENT PESS. SPEED OZMĚ [cm 3 /rev] [bar] [min -1 ] [mm] 32 version 01/2014
34 Ákladní popis Catalogue Sheets of P23 Series Basic Design P23 P23-7,9-1C1-SG02G02-N.002 7, ,8 103,6 G 3/8 Ø 24 G 3/8 Ø 24 P23-6,2-1C1-SG02G02-N.002 6, ,6 97,3 G 3/8 Ø 24 G 3/8 Ø 24 P23-5,8-1C1-SG02G02-N.002 5, ,9 95,8 G 3/8 Ø 24 G 3/8 Ø 24 P23-4,8-1C1-SG02G02-N.002 4, ,0 92,0 G 3/8 Ø 24 G 3/8 Ø 24 P23-4,4-1C1-SG02G02-N.002 4, ,2 90,5 G 3/8 Ø 24 G 3/8 Ø 24 P23-3,6-1C1-SG02G02-N ,6 60 ± ,8 87,6 G 3/8 Ø 24 G 3/8 Ø 24 P23-3,3-1C1-SG02G02-N.002 3, ,2 86,5 G 3/8 Ø 24 G 3/8 Ø 24 P23-2,5-1C1-SG02G02-N.002 2, ,7 83,5 G 3/8 Ø 24 G 3/8 Ø 24 P23-2,1-1C1-SG02G02-N.002 2, ,9 81,9 G 3/8 Ø 24 G 3/8 Ø 24 P23-1,6-1C1-SG02G02-N.002 1, ,1 80,3 G 3/8 Ø 24 G 3/8 Ø 24 P23-1,2-1C1-SG02G02-N.002 1, ,4 78,8 G 3/8 Ø 24 G 3/8 Ø 24 P23-0,8-1C1-SG02G02-N.002 0, ,6 77,3 G 3/8 Ø 24 G 3/8 Ø 24 ODE PUCH. DIECT DISPA- NOM. MIN. MAX. A B C D E F KEY CODE OF OT. CEMENT PESS. SPEED DIMENSION [cm 3 /rev] [bar] [min -1 ] [mm] version 01/
35 NOTES: 34 version 01/2014
36 version 01/
37 JIHOSTOJ a.s. Budějovická 148 CZ Velešín Czech epublic tel.: fax: http: // GPS N E
GEAR PUMPS. Displacement from 10 to 100 ccm Pressure up to 290 bar Speed from 350 to 3200 RPM
Displacement from 10 to 100 ccm Pressure up to 290 bar Speed from 350 to 3200 PM GEA PUMPS Q2 Gear Pump Catalogue Q2 TABE OF CONTENTS DESCIPTION......................................................................................................................
More informationMax. flow absorbed (l/mn) Torque (N.m/bar) R
M series motors Characteristics of the m series motors Motor model Displacement (cc/rev) Continuous max. speed (1) (rpm) Intermittent max. speed (1) (rpm) Max. flow absorbed (l/mn) Torque (N.m/bar) Torque
More informationE Series Back Pull Out End Scution. Centrifugal Pump DIN 24255
Back Pull Out End Scution Centrifugal Pump DIN 24255 MARKET SECTORS Buidling Services, RHVAC, Agriculture, Civil, Industries Back Pull Out End Suction Centrifugal Pump DIN 24255 MATERIAL OF CONSTRUCTION
More informationData sheet: Wilo-CronoNorm-NL 80/200-3/4
Data sheet: Wilo-CronoNorm-NL /-3/ Pump curves H/m 1 1 1 1 NPSH/m,5, 1,5 1,,5 P /kw 5 3 1 3 5 55% % 5% 7% 7% 7,9% 1 5 15 5 3 35 3 5 1 3 5 7% 7,3% 7% 7% 77,9% 7,% 7,% Ø 17 Eff. 7,9% Ø 1 Ø 19 7% Ø 19 Ø 1
More informationPUMP. Type EVM APPLICATIONS MATERIALS TECHNICAL DATA. Washing system Water treatment plants Reverse Osmosis system Some chemical applications
PUMP Type APPLICATIONS Washing system Water treatment plants Reverse Osmosis system Some chemical applications Conditioning systems Heating systems Industrial boilers Pressure boosting for industrial systems
More informationStandard pumps. Dimensions, weights Wilo-CronoLine-IL
Standard pumps Dimensions, weights Wilo-CronoLine-IL Standard pumps Dimensions, weights Wilo-CronoLine-IL Subject to change without prior notice /7 WILO AG / WILO AG Special features/product advantages
More informationMAAG TM PPU gear unit for roller presses, horizontal mills and kilns
MAAG TM PPU gear unit for roller presses, horizontal mills and kilns 2 Our quality policy FLSmidth MAAG Gear is committed to creating long lasting relationships that establish us as a trustworthy, reliable
More informationPPG Series High Precision Gearbox. Datasheet
PPG Series High Precision Gearbox Datasheet Version PPG-2014-01 http://www.primopal.com Description PrimoPal s PPG series High Precision Planetary Gearboxes are mainly used with kinds of servo motors and
More informationOur most important values are, environmental consciousness, high quality of the products, top-notch energy-efficiency and low life-cycle cost.
PUMP CATALOGUE Kolmeks Ltd is a Finnish pump and electric motor manufacturer and part of the privately owned Brandt Group. It is one of the most successful companies in the pump business in Finland, operating
More informationNM, NMD: Close Coupled Centrifugal Pumps with threaded ports
, D Construction Close-coupled, centrifugal pups; electric otor with extended shaft directly connected to the pup. : single-ipeller D: with two back-to-back ipellers (with axial thrust balancing). Connections:
More informationNM, NMS. Close Coupled Centrifugal Pumps with flanged connections. Construction. Applications. Operating conditions. Motor
lose oupled entrifugal Pumps The electropumps,, S, S series comply with the Regulation no. 7/ in force starting from.. European Materials omponents, S, S Pump casing ast iron ronze Lantern bracket asing
More informationrecool for lathes Fast and easy retrofitting to internal cooling with oil and emulsion
recool for lathes Fast and easy retrofitting to internal cooling with oil and emulsion www.rego-fix.com External flood cooling Peripheral cooling Internal cooling The differences of wet and dry machining
More informationROUNDO Section Bending Machines Type R-1 through R-21-S
ROUNDO Section Bending Machines Type R-1 through R-21-S Friläggas 1 Roundo Section Bending Machines - Largest selection on the market ROUNDO is the worlds leading manufacturer of plate and section bending
More informationMPF Multiport. Maximum pressure 8 bar F l o w r a t e s t o l / m i n
MPF Multiport Maximum pressure 8 bar F l o w r a t e s t o 7 5 l / m i n echnical data Filter housing (Materials) ead: luminium Cover: Nylon (only for: MPF 4) luminium (all the other) owl: Nylon Pressure
More informationM-Series, Actuator Overview. Machine Screw Cutaway. UNI-LIFT Machine Screw Actuators offer precise. 12
M-, Actuator Overview UNI-LIFT Machine Screw Actuators offer precise positioning, uniform lifting speeds and capacity up to 250 tons. Standard model configurations include upright or inverted units with
More informationNovax. Axial flow fans Standard and hot smoke
Novax Axial flow fans Standard and hot smoke Product facts Product Axial flow fans with adjustable blades. ACN for duct installation ACW for heavy duty ACG free intake with connection to duct ACP free
More informationNK End-suction centrifugal pumps
Being responsible is our founation Think ahea makes it possible Innovate is the essence HARD-WORKING AND RELIABLE MEETING YOUR NEEDS IS OUR JOB NK En-suction centrifugal pumps PT. GRUNDFOS POMPA Jl. Rawa
More informationCatalog HY /US SERIES DESCRIPTION BODY NO. PAGE NO.
Catalog HY15-350/US Contents odies and SERIES DESCRITION ODY NO. GE NO. RKER STNDRD ODIES ND ITIES C04-... 04, Way... 04--*... 7 C04-3... 04, 3 Way... 04-3-*... 8 C08-... 08, Way... 08--*... 9 C08-3...
More informationCR64. CR Series. Parts List & Kits. Parts List & Kits CR64. GRUNDFOS Commercial Industrial Service Manual
& Kits CR64 Being responsible is our foundation Thinking ahead makes it possible Innovation is the essence & Kits CR64 GRUNDFOS Commercial Industrial Service Manual CR64 & Kits Contents Spare Part Kits
More informationNESD / NESE. SINGLE-STAGE SELF-COOLED CENTRIFUGAL PUMPS TO STANDARD EN (NPE 44121) High-temperature water OPERATING LIMITS APPLICATIONS
OERATING LIMITS Flow up to: Head up to: 9 m CE Service pressure up to: up to bar* Temperature: min: C* / max: C* *: depending on model NESD / NESE SINGLE-STAGE SELF-COOLED CENTRIFUGAL UMS TO STANDARD EN
More informationKit Potentiometer Rotational Analog Displacement Sensor
Kit Potentiometer Rotational nalog Displacement Sensor FETURES Conductive plastic potentiometer technology, infinite resolution nalog or digital output Low height High flexibility of wires pplicable standards:
More informationUTS. UTS : Your first choice in waterproof connectors! Description. IP68/IP69K - Plastic connector
Description IP68/IP69K - Plastic connector UTS series is a range of industrial plastic circular connectors offering IP68/IP69K water protection. 4 shell s - up to 32 contact positions - are available with
More informationHIGH PRESSURE + STAINLESS STEEL. Rotary Union Solutions HPS. Series FLOW PASSAGE OPTIONS
RESSURE + SAESS SEE Rotary Union Solutions S Series FW ASSAE S 1 3 4 6 8 12 16 Rotary Union Solutions S Contents About DS 3 What is a Rotary Union? 4 S Series verview 5 ow o rder 6 Specifi cations & perating
More informationDAS Series Submersible Waste Water and Sewage Pumps
art DAS Series Submersible Waste Water and Sewage s ALICATIONS: ing of domestic and industrial sewage At sewage treatment plants ing of chemical and industrial waste water. ing of rain water All kinds
More informationNovenco Axial Flow Fans. Novax St andard and hot Smoke
Novenco Axial Flow Fans Novax St andard and hot Smoke Product facts Product Axial flow fans with adjustable blades. ACN for duct installation ACG free intake with connection to duct ACP free suction and
More informationB-Series Section Overview. Ball Screw Cutaway. UNI-LIFT Ball Screw Actuators provide high. 34
B- Section Overview UNI-LIFT Actuators provide high efficiency and high speed in a linear positioning package up to 100 tons. The low friction ball screw and nut design provides longer life at load and
More informationM40 Size 1.5/Size 1.5i Power Connectors
M40 Size 1.5/Size 1.5i Power Connectors Approvals Tested acc. to DIN EN 61984 UL/CSA metallic connectors Number of ways: Contact diameter: Nominal current (VDE) / 20 C: Nominal current (UL): Nominal current
More informationConcentric butterfly valves, wafer, lugged and flanged
Concentric butterfly valves, wafer, lugged and flanged Table of contents Introduction Technimex is an international supplier of products needed for urban infrastructure such as water-, sewage-, and gas
More informationPIPING, VALVES AND JOINTS
Piping and accessories... page 208-209 PVC Valves... page 210-213 Clamp saddle... page 213 Clapet Valve, Hose Holder Joints, Galvanised Collar... page 214 Compression connections... page 215 Pasting PVC
More informationDIAPHRAGM VACUUM PUMPS AND COMPRESSORS
DIAPHRAGM VACUUM PUMPS AND COMPRESSORS DATA SHEET N 816 N 816 KNE (w/ AC motor) N 816 KN.29DC-B-M (w/ standard-life BLDC motor) N 816 KN.29DC-B (w/ long-life, multi-function BLDC motor) Concept The diaphragm
More informationAir Grinders with Collets
Screwdriving technology Automation Air motors Air tools Air Grinders with Collets AngleHead Design Power Output: 130 W, 300 W, 700 W (.17 /.40 /.94 HP) highest power output at a low weight ergonomic highly
More informationOther variations which are not mentioned in this document are on demand (if possible).
GENERAL INFORMATION This specification document is for gas-filled thermometers manufactured by: STIKO, Industrieweg 5, 9301 LM Roden, The Netherlands. STIKO is a manufacturer of mechanical instruments
More informationSUBMERSIBLE PUMPS FOR WASTE WATER VORTEX IMPELLER
G BEBE WE WE EX EE ade in high quality engineering cast iron. ortex ipeller. he subersible pups are supplied coplete with threaded counterflanges, packings and stainless steel bolts. pplications - ewage
More informationFull Automatic Mounting Press
Full Automatic Mounting Press B/B-E3 One button start Perfect mounting Intuitive operation http://www.toptech.tw Instruction Operation video Top cover Quick release Indicator light LED display Mounting
More informationteckentrup-sperrkant The Original
teckentrup-sperrkant The Original www.teckentrup.de New Serrated Locking Washer NSK Innovative Screw and Bolt Locking Technology» Reliable bolt locking at low and high preload forces» Locking function
More informationRitmo meets all your welding needs in your jobsite
Ritmo meets all your welding needs in your jobsite The information and photos in this publication are not binding and RITMO S.P.A. is free to make any alterations without prior notice. A RITMO DVANTAGE
More informationStainless Steel Gas Springs
Stainless Steel Gas Springs Gas Springs in 4 (V2A) Stainless Steel As well as its very extensive range of standard adjustable force gas springs ACE can offer a wide range of stainless steel gas springs.
More informationCAPILLARY DIAL THERMOMETERS TYPE TXC
CAPILLARY DIAL THERMOMETERS TYPE TXC TYPE DRAWING DIMENSIONS mm A TXCxxxXA B 38 37 45 45 55 C 13 13 13 13 13 B B 41 40 51 51 57 C 13 13 13 13 13 TXCxxxXB D 86 110 132 196 285 D B 33 29 31 32 45 C 13 13
More informationMEMORANDUM. Technical Committee on Liquefied Petroleum Gases. Subject: NFPA 58 Proposed Tentative Interim Amendment (TIA) No. 1153
National Fire Protection Association 1 Batterymarch Park, Quincy, MA 02169-7471 Phone: 617-770-3000 Fax: 617-770-0700 www.nfpa.org MEMORANDUM To: From: Technical Committee on Liquefied Petroleum Gases
More informationRitmo meets all your welding needs in your jobsite
Ritmo meets all your welding needs in your jobsite A RITMO DVANTAGE RITMO WORLDWIDE Ritmo has professional distributors and resellers all over the world. Our staff is ready to assist you in English, Spanish,
More informationPAS. Heavy Duty Pressure Transmitter
Heavy Duty Pressure Transmitter measuring monitoring analyzing PAS Span: -14.7 21 PSIG up to 0 8700 PSIG t max : 248 F Process Connection: ½" NPT, ¼" NPT, or Various Diaphragm Seals on Request Material:
More informationDIMENSIONS...R20 Series MOUNTING AND SHAFT OPTIONS CONNECTORS SIDE VIEW ENGLISH (INCHES) METRIC (MILLIMETERS) REAR MOUNTED MS CONNECTOR OPTION
DIMENSIONS...R20 Series SIDE VIEW AND THERMISTOR (FLYING LEADS AL) (3.11) (79) SECONDARY 2.28 MAX. 57,9 MAX. 18.0 MIN. 457,2 MIN. REF. R21 6.38 (4.93) R22 7.38 (5.93) R23 8.38 (6.93) R24 9.38 (7.93) REF.
More informationFull Automatic Mounting Press
Full Automatic Mounting Press L1/L1-E3/L2/L2-E3 Dual cylinder High efficiency User-friendly Touch panel http://www.toptech.tw 0 Instruction Model type: L1 Operation video Top cover Quick release Thermostat
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
More informationMetal Bellows Couplings Servo-Insert Couplings Line Shafts
US 08 2009 Metal Bellows Couplings Servo-Insert Couplings Line Shafts Partner for performance www.gerwah.com A Global Presence For You The RINGFEDER POWER TRANSMISSION GMBH was founded in 1922 in Krefeld,
More informationfiber optic through-beam and dif. reflection sensors
ipf electronic gmbh Kalver Straße 25 27 through-beam sensors diffuse reflection sensors accessories fiber optic through-beam and dif. reflection sensors plastic optic fibers 1800 1 2 1800 plastic fiber
More informationRitmo meets all your welding needs in your jobsite
Ritmo meets all your welding needs in your jobsite A RITMO DVANTAGE RITMO WORLDWIDE Ritmo has professional distributors and resellers all over the world. Our staff is ready to assist you in English, Spanish,
More informationBID RESPONSE LABEL THIS LABEL FOR USE WITH UNITED STATES POSTAL SERVICE DELIVERY RECONDITION MUFFIN MONSTER ELECTRIC (DATE): DEC.
BID RESPONSE LABEL Proposals sent by U.S. Mail should be addressed to Director of General Services, Town of Manchester, 494 Main Street, P.O. Box 191, Manchester, CT 06045-0191. Proposals hand delivered
More informationcentrotex / captex / mandotex
UK N-OV SYSTMS centrotex standard size M. Machine adapter with short taper / cylinder fit Short taper 2 V S V S J M J M Spindle nose U 2-6 2-8 P170 P220 Outer Ø 2 [mm] 73 g7 76 g7 85 g7 91 g7 101 g7 110
More informationMIG/MAG. Catalogue 2004/2005. W elding & cutting brought to the point.
MIG/MAG Catalogue 2004/2005 W elding & cutting brought to the point. Content MIG/MAG Welding Torches MIG/MAG Welding Torches MB air-cooled (up to 230 A) Page 4 5 MB 15 AK / 15 AK-FX / 25 AK / 25 AK-FX
More informationSensyflow P. Thermal air-mass flowmeter for test rigs and quality assurance 10/ EN. Function and System Design
Sensyflow P Thermal air-mass flowmeter for test rigs and quality assurance 10/1-6.8 EN Direct mass flow measurement Wide measuring range (1:0) High measuring accuracy measuring deviation < 1 % of measured
More informationteckentrup-sperrkant The Original
teckentrup-sperrkant The Original New NSK detent-edged washer Innovative screw locking technology Reliable screw locking protects against loosening and unscrewing where high vibration is present Settling
More informationBase for Stable Mounting an Eco Pedestal
Eco Air Meter Stand With Inspection Door Before you buy your stand, make sure to ask the seller about the main post if he s using a 1/8 solid metal post instead of a 1/16 thin metal. Eco Top Light Full
More informationIntelligent Drivesystems, Worldwide Services. G1014 NORDBLOC.1 2-stage helical-bevel gear unit SK SK SK SK
Intelligent Driveytem, Worldwide Service GB G11 NORDBLOC.1 2tage helicalbevel gear unit SK 9272.1 SK 92772.1 SK 9372.1 SK 93772.1 Content INTRODUCTION................................... A 1 3 STANDARDS,
More informationKlinger Manometer Serie 200
Klinger Manometer Serie 200 All stainless steel Bourdon tube pressure gauges watertight casing, dry or liquid filled execution; NS 63-100 150 200-250; Ranges included between -1 and 1.600 bar. The instruments
More informationBORING KITS from Ø 6 mm up to 210 mm
Bohrstar BORING KITS from Ø mm up to 0 mm Coupling system COUPING SCREW ARBOR BORING HEAD COUPING SCREW HIGH RIGIDITY By tightening the two cone shaped coupling screws, high axial forces are developed
More informationFlue gas discharge material Dimensions configurations BFC 28 / 30 / 50 / 60
Flue gas discharge material Dimensions configurations / 30 / 50 / 60 Wall duct concentric Wall duct concentric Y B V A W X V 550 550 550 550 W 725 790 790 790 X 1535 2075 2075 2075 Y 1460 1480 1480 1480
More informationMIG/MAG Welding Torch MB 401 D / MB 501 D. liquid cooled. BINZEL. The right welding torch for every job! For welding and cutting come to the point.
MIG/MAG Welding Torch MB 401 D / MB 501 D liquid cooled C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M BINZEL. The right welding torch for every job! BINZEL liquid cooled welding torches incorporate
More informationNM, NMS. Close Coupled Centrifugal Pumps with flanged connections
lose oupled entrifugal Pups Materials oponents, S, S Pup casing ast iron ronze Lantern bracket asing cover for S GJL N Gu Sn N Lantern bracket S ast iron GJL N Ipeller ast iron ronze GJL N Gu Sn N rass
More informationMIG/MAG Welding Torch MB 401 D / MB 501 D. liquid-cooled. ABICOR BINZEL. The right welding torch for every job!
MIG/MAG Welding Torch MB 401 D / MB 501 D liquid-cooled C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M ABICOR BINZEL. The right welding torch for every job! BINZEL liquid cooled welding torches incorporate
More informationALUMINIUM ROLLERS MADE IN ITALY
ALUMINIUM ROLLERS MADE IN ITALY Alveolar aluminium rollers, diameter 60mm to 250mm (natural or anodized). Roller manufacturing will be completely based on customer's drawings. The rollers can be supplied
More informationPHASED OUT. LED light engine / OLED LED linear / area. Module CLE Shallow G1 ADV Modules CLE
Product description For round and and ultra flat, wall-mounted, ceiling-mounted and suspended luminaries Backlighting depth of 3 mm can be realized Wide beam chip enables high homogeneity despite low backlighting
More informationAXILOCK S PIPE TEEKAY COUPLINGS MORE VALUE LESS COST!
TEEKAY AXILOCK S PIPE COUPLINGS Axial Restraint Pipe Coupling System GL LR DNV BV ABS RINA approved Corrosion resistant engineering concept 100% rubber lined (no exposed metal) No spot welding 2 screws
More informationAXILOCK PIPE TEEKAY COUPLINGS
TEEKAY AXILOCK PIPE COUPLINGS Ultra high security axial restraint pipe coupling system for plain ended pipes Original patented double casing design GL LR DNV BV ABS RINA approved Frequently specified for
More informationDIST. AUTORIZADO MEX (55) QRO (442) MTY (81) Edition 10/2005
dition /0 IST. UTORIZO X () 1 QRO (4) 1 9 0 TY (81) 8 4 G R W H T h e o m p a n y GRWH GmbH was founded in 10. The idea of new, innovative products has made GRWH a recognized partner in the machine tool
More informationDIAPHRAGM VACUUM PUMPS AND COMPRESSORS
DIAPHRAGM VACUUM PUMPS AND COMPRESSORS DATA SHEET N 816 N 816 KNE N 816 KN.29DC-B-M N 816 KN.29DC-B Concept The diaphragm pumps from KNF are based on a simple principle an elastic diaphragm, fixed on its
More informationDÖRRIES SCHARMANN ECOSPEED HSK-A63/80 STARRAG WERKZEUGAUFNAHMEN TOOL HOLDERS HSK A63/80.
DÖRRIES SCHRMNN ECOSPEED HSK-63/80 STRRG STC TOO 800X HODERS WERKZEUGUFNHMEN TOO HODERS HSK 63/80 www.haimer.com POWER SHRINK CHUCK HSK 63/80 (TPER 63 mm/fnge 80 mm) 10 4.5 D3 CERTIFICTE OF QUITY ll functional
More informationTaper Pins, Unhardened DIN 1 B ISO 2339
Taper Pins, Unhardened DIN B ISO 339 Ø.5 Ø Ø.5 Ø 3 Ø 4 Ø 5 Ø 6 Ø Ø 4 Ø 6 Ø 0................ x8... x30 x3 x36... 3x3 3x36 x40 x45 x50... 3x40 3x45 3x50 0x40 0x45 0x50 3x55 0 5 4x55 0 5 5x55 5x60 5x65 6x65
More informationMIG/MAG. Catalogue 2006/2007. T echnology for the Welder s World.
MIG/MAG Catalogue 2006/2007 T echnology for the Welder s World. Content MIG/MAG-Welding Torches MIG/MAG Welding Torches MB GRIP air-cooled (up to 230 A) Page 4 5 MB GRIP 15 AK / 25 AK MIG/MAG Welding
More informationMedical technology Main catalog. Medicalline Medical industry connectors
Medical technology Main catalog Medicalline Medical industry connectors STÄUBLI ELECTRICAL CONNECTORS Long-term solutions Expert connections Stäubli Electrical Connectors is a leading international manufacturer
More informationCOLLARS and WASHERS. HEAVY TURNED WASHERS page 4 TURNED TAPER WASHERS 5 TURNED WASHERS FOR SWIVEL HEADS 5 COLLARS IN COMPLIANCE WITH DIN 705 6
COLLARS and WASHERS HEAVY TURNED WASHERS page 4 TURNED TAPER WASHERS 5 TURNED WASHERS FOR SWIVEL HEADS 5 COLLARS IN COMPLIANCE WITH DIN 705 6 CLAMPING COLLARS FORM C-AB 7 CLAMPING COLLARS WITH OPEN RING
More informationTT SERIES OD ORBITAL CUTTING & BEVELING MACHINES 1/8 TO 168 OD 1/9
TT SERIES OD ORBITAL CUTTING & BEVELING MACHINES 1/8 TO 168 OD PRACTICAL TOOLS INC. P.O. Box 233 Aurora, ON L4G 3H3, Canada Phone: 905-727-0014 / 888-847-8880 Fax: 905-727-8483 info@practicaltoolsinc.com
More informationACTUATEC CORPORATION
TUT OPOTION : No.41, u-huan 7 d, u-ku Ind. Park, u-ku Hsiang, Taipei Hsien, Taiwan. TL : 886-2-2299-1588 FX : 886-2-2299-3786 http://www.actuatec.com -Mail : sale@actuatec.com TUT OPOTION TUT OPOTION :
More informationcrimp 68 N 113 N Mechanical endurance : 500 cycles (full mating-unmating)
pplications ormer connector for military applications. Now used in the fields of professional and general electronics. tandards I- 26482 eries 1 N 934-He 301 V 95328 95 0017 T1 list Q approved ( version)
More informationPerfect sealing, a guarantee of economy
RCS Compressed air Perfect sealing, a guarantee of economy 1 2 3 he problem 15 to 30% of compressed air is lost by leakage between the compressor and the tool. he calculation A 1mm hole in your circuit
More informationSLANT BED CNC TURNING CENTER
1 SLANT BED CNC TURNING CENTER DESCRIPTION FTC-300 FTC-350 FTC-350L FTC-350XL FTC-350LY Swing Over Bed mm Ø 550 Ø 600 Ø 600 Ø 600 Ø 600 Max. Turning Diameter mm Ø 300 Ø 350 Ø 350 Ø 350 Ø 350 Max. Turning
More informationSMART MOTION C A T A L O G 2009:1
SMART MOTION C A T A L O G 2009:1 Which arm do you need? To ensure that the balancing arm you order meets your expectations it is important to consider the following aspects. 1. Which type? PARALLEL ARM
More informationSolar Isolator Range. Bright solutions
Solar Isolator Range Bright solutions The World s Finest Contents Page ON-OFF Switches for Panel Mounting 4 ON-OFF Switches for Single Hole Mounting 4 ON-OFF Switches for Base Mounting with Door Clutch
More informationCase 1:16-cv JAL Document 1 Entered on FLSD Docket 03/11/2016 Page 1 of 13 UNITED STATES DISTRICT COURT SOUTHERN DISTRICT OF FLORIDA
Case 1:16-cv-20921-JAL Document 1 Entered on FLSD Docket 03/11/2016 Page 1 of 13 UNITED STATES DISTRICT COURT SOUTHERN DISTRICT OF FLORIDA CASE NO.: 9:16-CV-80378 LITENS AUTOMOTIVE PARTNERSHIP, a Canadian
More informationRef No: N Date: May 25, 2005
Ref No: N05-045 Date: May 25, 2005 GAS PRODUCTS NO. 64 Effective Date: May 1, 2006 Call us today! We can help you stay on top of changes that will affect your Certification! 1-866-797-4272 Announcing:
More informationElektrospindeln / 2-Achsfräsköpfe Direct Drive Electrospindles / Direct Drive 2 Axis Heads READY TO PERFORM.
Elektrospindeln / 2-Achsfräsköpfe Direct Drive Electrospindles / Direct Drive 2 Axis Heads READY TO PERFORM. DIRECT DRIVE HST1 SINGLE SIDED HST1 DOUBLE SIDED HST1 SINGLE SIDED HST1 DOUBLE SIDED 2-ACHSFRÄSKÖPFE
More informationIgE 81 WELLPOINT SYSTEM
EWATERING EQUIPMENT IgE 8 WEPOINT SYSTEM EWATERING EQUIPMENT IgE 8 WEPOINT SYSTEM IgE 8 WEPOINT SYSTEM IgE 8 dewatering system Wellpoint systems are broadly used and recognized in the construction of drainage
More informationLED light engines LED compact. Module CLE G3 ADV Modules CLE ADVANCED
Module CLE G3 ADV Modules CLE ADVANCED Product description Ideal for ceiling-mounted and wallmounted luminaires LED system solution consisting of the LED module, the control gear with integrated emergency
More informationCOILS AND CONNECTORS FOR SERIES 70 AND NAMUR VALVES
COILS AND CONNECTORS FOR SERIES 70 AND NAMUR VALVES COILS SIDE 22 mm Voltage tolerance: -10% + 15% Degree of protection: IP65 DIN 40050 with connector Avoid prolonged exposure to atmospheric agents Coil
More informationLaparoscopic Reusable Trocars and Sleeves
High quality trocars and sleeves are essential during multi-puncture, minimally invasive surgical procedures. Our wide range of reusable trocars and sleeves are more economically beneficial and technologically
More informationAdvertising clocks, largesize clocks and facade
Swiss Time Systems The Clock as an Effective Eye-Catcher in City and Building Architecture Advertising clocks, largesize clocks and facade clocks are more than mere public displays of time. They attract
More informationPneufit C & Pneufit M metric Ø mm O/D tube
Pneufit & Pneufit M metric Ø... mm /D tube orgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range of over, composite
More informationPLASTICA. Martin. Levelling Components. Made in Italy
PLASTICA Made in Italy 59 standard description standard A B D F G H 18400 M16X100 30 100 Ø 83 13 M16 18 130 15000 18404 M16X150 30 150 Ø 83 13 M16 18 180 15000 18408 M16X200 30 200 Ø 83 13 M16 18 230 15000
More informationSOT1118D. 1. Package summary
1. Package summary Table 1. Package summary plastic, leadless thermally enhanced ultra thin and small outline package; 6 terminals; 0.65 mm pitch; 2 mm x 2 mm x 0.65 mm body 3 June 2018 Package information
More informationSOURIAU Extends its High Density Offer with Size #26 Contact Technology
SOURIU xtends its Offer with Size #26 ontact Technology SOURIU brings to market a lightweight, robust and reliable 8ST High ensity solution from the smallest to the largest. reliable & robust solution
More informationwafer level chip-scale package, 6 bumps SOT1454 Footprint dimensions (mm) 0.65 x 0.44 Footprint area (mm²) 0.29
18 October 2018 Package information 1. Package summary Terminal position code Package type descriptive code Package type industry code Package style descriptive code Package body material type Mounting
More informationClassification of Parts and Accessories in the Customs Tariff. In Brief
Ottawa, May 13, 2014 Memorandum D10-0-1 Classification of Parts and Accessories in the Customs Tariff In Brief The editing revisions made in this memorandum do not affect or change any of the existing
More informationMazak Quick Turn Smart 300, 350 M Toolholder Program
Toolholder Program Static Toolholders - Standard Program OD cutting holder 25 48-93004 1" 48-93005 Face and ID cutting holder 25 48-93006 1" 48-93007 Combination toolholder Ø 50 48-93008 Ø 2" 48-93009
More informationSPARE PARTS SINGLE-DISC, HAND PROPELLED SALT SPREADER F 80 / 2000
COSTRUZIONE MACCHINE AGRICOLE SPARE PARTS SINGLE-DISC, HAND PROPELLED SALT SPREADER F 80 / 2000 Rev.01 dated 14-12-2007 VARENR.: N-GA03 + POS.NR. EXPLODED DIAGRAM OF THE F 80 / 2000 SALT SPREADER F 80-2000
More informationSOT886 Footprint dimensions (mm) 1.45 x 1 Footprint area (mm²) 1.45
plastic, leadless extremely thin small outline package; 6 terminals; 0.5 mm pitch; 1 mm x 1.45 mm x 0.5 14 November 2018 Package information 1. Package summary Terminal position code Package type descriptive
More informationUNITED STATES DISTRICT COURT WESTERN DISTRICT OF NEW YORK
Robinson v. Garlock Equipment Co. et al Doc. 35 UNITED STATES DISTRICT COURT WESTERN DISTRICT OF NEW YORK EDWARD ROBINSON, Plaintiff, -vs- GARLOCK EQUIPMENT CO., RUSSELL DEAN, INC. and GARLOCK-EAST EQUIPEMENT
More informationMachine volt/hz Watt r.p.m. kg Plug R ref. ES / EU
ES EP EU STR: Single discs Machine volt/hz Watt r.p.m. kg Plug R ref. ES 330 ES 330 230/50 600 165 22 EU 611500 ES 420 ES 420 duo 230/50 1300/1600 140/280 48 EU 612400 ES 420 230/50 1200 175 40 EU 614205
More informationCase studies Vertical bearing GGG40 (GJS )
Vertical bearing GGG40 (GJS-400-15) Machine: MC HSK63 Material: GGG 40 (EN-GJS-400-15) Parts/Year: ca. 100 000 Pre-machining: boring Coolant : Minimum quantity lubrication (MQL) Ø 33N5 x 142mm MQL CircoTec
More informationSOT457 Footprint dimensions (mm) 2.9 x 2.75 Footprint area (mm²) 7.98
28 November 2018 Package information 1. Package summary Terminal position code Package type descriptive code Package type industry code Package style descriptive code Package body material type JEIT package
More informationSOD Package summary
plastic, leadless ultra small package; 2 terminals; 0.65 mm pitch; 1 mm x 0.6 mm x 0.48 mm body 5 June 2018 Package information 1. Package summary Table 1. Package summary Terminal position code Package
More information