PUMP Type APPLICATIONS Washing system Water treatment plants Reverse Osmosis system Some chemical applications Conditioning systems Heating systems Industrial boilers Pressure boosting for industrial systems MATERIALS Pump body, external casing, casing cover impellers, diffusers, bearing sleeve, coupling guard and bolts in contact with liquid AISI (), AISI 316 (L), G version : bottom casing in cast iron Tierods and bolts not in contact with liquid in zinc coated steel Shaft in AISI 316 Bearing in contact with liquids in tungstencarbide Bracket and base in cast iron Mechanical seal in SiC/Carbon/FPM (35101) Cartridge mechanical seal standard (356) TECHNICAL DATA Asynchronous poles motor Insulation : Class F Protection : IP55 1~V ± 10% Hz (up to. kw) 3~/00V ± 10% Hz delta connection (up to kw included) 3~00/6V ± 10% above kw
Vertical MultiStage Stainless Steel Pump PERFORMANCE CHART 00 16 Bar 5 Bar Bar Hz 0 1 13 0 1 70 6. 1. 13 9.0 19.0 1.0 16 1 1.. 10. 1 16 16.5.5.0 10.0 1 13 133 13 3 1 10 7 6 10.5 1031.5 9 93 3 7 73 6 63 5 10 53 10 9 9 7 7 7 6 6 5 5 3 71 7 73 63 61 6 63 5 51 5 53 1 3 3 31 To t al H ead (m ) 70. 60..55 0.55. 7 6 5 0..55 6. 5. 3 5.0 3. 3 3.5.0 3 1.0 3 33 1.5... 1..0 10 3 5 10 1 3 5 6 5 0.01 0.0 0.0 0.03 0.05 0.07 0.1 0. 0. 0.3 0.5 0.7 1.0 Capacity (m 3 /min) MODEL CODE SPECIFICATIONS ( ) 5 0 N 5 (E) E: for inverted drive only Model Series M: for Single Phase only (G): Cast iron Bottom Casing Power output in kw (L): 316 SS ( ): SS (option) Hz Nominal Capacity (m 3 /hr) N: Oval Flanges F: Round Flanges Maximum working pressure: 16 bar 5 bar bar (only for 35) Liquid temperature: from C up to +1 C from C up to +5 C (for W) No. of Impeller No. of reduced impellers (only for 3/5/6)
Vertical MultiStage Stainless Steel Pump STANDARD SPECIFICATION (G) Model Type Application Temperature Flow / head Max. working pressure Sealing 3 5 Water supply, Light industrial (boiler feed, washing, coolant, etc.) to +1 C 0 m 3 /hr (max): 0m (max) /MPa (16Bar/5Bar) 10 16 bar: Mechanicalseal according to DIN 1 3 5 //Mpa (16/5/Bar) Cartridge type Mechanicalseal 5 bar: Cartridge Mechanicalseal according to DIN according to DIN Connecting flange OVAL or DIN TYPE Material Impeller EN (AISI ) Intermediate casing EN (AISI ) Bottom casing EN (AISI ) Cast iron (G) Casing cover Cast iron Outer casing EN (AISI ) Shaft EN 1.01 (AISI 316) Liner ring EPDM/EN (AISI ) Motor bracket Cast iron Mechanical seal Silicon Carbide/Carbon/FPM Oring EPDM Motor No. of Poles P (00rpm:Hz Synchronous speed) Phase Three phase Voltage/Hz V/:Hz (or 00V:Hz) Flange mount IM B1 (up to kw) (IEC motor) IM B5 (above kw) Optional Specifications Material of Construction All wetted parts in SUS available upon request. DIN TYPE 6 STANDARD SPECIFICATION (L) Model Type Application Temperature range Flow / head Max. working pressure Sealing 3 5 10 Water supply, R.O., D.I. Water, ultrafilter systems, process water, etc. to +1 C 0 m 3 /hr (max): 0m (max) /MPa (16Bar/5Bar) Cartridge Mechanicalseal according to DIN Connecting flange OVAL or DIN TYPE Material Impeller EN 1.01 (AISI 316) Intermediate casing EN 1.01 (AISI 316) Bottom casing EN 1.01 (AISI 316) Casing cover EN 1.01 (AISI 316) Outer casing EN 1.01 (AISI 316) Shaft EN 1.01 (AISI 316) Liner ring PTFE/EN 1.01 (AISI 316) Motor bracket Cast iron/en 1.01 (AISI 316) Mechanical seal Silicon Carbide/Carbon/FPM Oring EPDM Motor No. of Poles P (00rpm:Hz Synchronous speed) Phase Three phase Voltage/Hz V/:Hz (or 00V:Hz) Flange mount IM B1 (up to kw) (IEC motor) IM B5 (above kw) Optional Specifications Connecting flange Vitaulic coupling only for AISI 316 PUMP DIN round flange for 16 bar range 1 3 5 //Mpa (16/5/Bar) DIN TYPE 6
Vertical MultiStage Stainless Steel Pump EBARA Corporation was established in 191 as a pump manufacturer and today EBARA is the world s foremost manufacturer of pump and pump system. EBARA is proudly presenting Vertical Multistage pump type, manufactured with great experience of EBARA in design and production of stamped stainless steel pumps, EBARA pumps offer technically advance designs to meet most market demands, including pumping of aggressive liquids. Two standard pump options are available to satisfy most of the market requirements: (G) : Bottom casing in cast iron, other liquid contact parts in SS stainless steel for general water supply usage. (L) : All wetted contact upon parts in SS316 stainless steel for aggressive liquid pumping operation. Optional materials available upon request: All wetted contact parts in SS stainless steel for industrial pumping applications. 1. Quality motor used. Standard IEC electrical motor used for pump; thus ensuring easy replacement as standard motor is easily available in the market.. Spacer coupling for userfriendly servicing. For kw & above models, uniquely designed split type spacer coupling are used to permit easy assembly/disassembly works without dismantling pipe work and motor. STANDARD IEC MOTOR WITH ALL BEARING. Wide selection options. Two () pump types are available as standard i.e. G (Cast iron bottom casing; other wetted parts in SUS) and L (All wetted parts in SUS316L). All wetted parts in SUS available as option. (G) Version FC/SUS Option: Version SUS (L) Version SUS316 5. High efficiency hydraulic design EBARA owned R&D has resulted in the newly developed hydraulic parts for, particularly impellers and intermediate casing that provides high efficiency operation. D S/S impeller 3D S/S impeller Guide vane intermediate casing BALL BEARING Heavy duty bearing set mounted on pump motor bracket, thus eliminating use of nonstandard motors to ensure reliable pump operation. 6. Bottom casing support. For 5 and 6, unique bottom casing bearing is used to enhance longer operating life of the pumps. 3. Cartridge mechanical seal. Cartridge mechanical seal is used for all pump models, except 31 (16Bar). Thus permiting easy maintenance works at site. Tungsten carbide Bottom Bearing.
Vertical MultiStage Stainless Steel Pump 31 3 6 Pump Type 3 N5/0. 3 3N5/0. 3 N5/0.55 3 5N5/0.55 3 6N5/0. 3 7N5/0. 3 9N5/ 3 N5/ 3 13N5/ 3 N5/ 3 1F5/. 3 F5/. 3 6F5/ 5 N5/0. 5 3N5/0.55 5 N5/0. 5 5N5/ 5 6N5/ 5 7N5/ 5 N5/ 5 10N5/. 5 N5/. 5 1N5/. 5 1N5/ 5 16N5/ 5 1F5/.0 5 19F5/.0 5 F5/.0 5 F5/ 10 N5/0. 10 3N5/ 10 N5/ 10 5N5/. 10 6N5/. 10 N5/ 10 10N5/.0 10 N5/.0 10 1N5/ 10 1N5/ 10 F5/ 10 16F5/ 10 1F5/ 10 F5/ 10 F5/ 1 F5/. 1 3F5/ 1 F5/.0 1 5F5/ 1 6F5/ 1 7F5/ 1 F5/ 1 10F5/ 1 1F5/ 1 1F5/ 1 F5/ 1 16F5/ Pmax. [MPa] Motor [kw] 0. 0. 0.55 0.55 0. 0... 0. 0.55 0.....0.0.0 0....0.0..0 H 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 H 1 6 3 356 39 0 9 53 63 717 55 3 31 39 7 3 9 5 565 631 6 769 797 1 9 333 363 03 3 73 53 603 633 67 73 76 79 5 9 5 3 3 73 5 56 60 6 3 91 955 995 H3 3 3 3 3 3 3 3 3 7 67 7 67 7 67 7 67 6 3 3 3 3 3 3 7 67 7 67 7 67 7 67 7 67 6 6 6 6 6 3 3 3 3 7 67 7 67 7 67 6 6 6 3 7 67 6 6 3 3 3 3 3 F 0 0 0 0 0 0 0 0 0 0 E 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 5 5 5 5 5 5 5 5 5 5 0 0 0 0 0 0 0 0 0 0 0 0 B 1 1 1 1 1 1 1 1 17 10 17 10 17 10 17 10 1 1 1 1 17 10 17 10 17 10 17 10 17 10 70 17 10 17 10 17 10 70 70 70 70 70 70 17 10 70 70 70 70 C 19 19 19 19 1 19 1 19 1 19 1 19 13 13 13 13 19 19 1 19 1 19 1 19 13 13 13 13 13 19 1 19 1 19 13 13 13 19 19 19 19 19 19 6 13 19 19 19 19 6 6 6 6 6 Dimension [mm] BM BL BY1 BW 19 10 10 19 10 10 19 10 10 19 10 10 19 10 10 19 10 10 19 10 10 19 10 10 19 10 10 19 10 10 19 10 10 19 10 10 19 10 10 19 10 10 19 10 10 19 10 10 19 10 10 19 10 10 19 10 10 19 10 10 19 10 10 19 10 10 19 10 10 19 10 10 19 10 10 19 10 10 19 10 10 19 10 10 19 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 SA Ø5 Ø5 Ø5 G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ Ø3 Ø3 Ø3 Ø3 G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ G1 1/ Ø0 Ø0 Ø0 Ø0 Ø0 Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø SG Ø66 Ø66 Ø66 Ø Ø Ø Ø Ø Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 D1 Ø5 Ø5 Ø5 Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø D H Ø1 16 Ø1 16 Ø1 16 Ø Ø Ø Ø Ø1 Ø1 Ø1 Ø1 Ø1 Ø165 Ø165 Ø165 Ø165 Ø165 Ø165 Ø165 Ø165 Ø165 Ø165 Ø165 Ø165 SN D3 BF BH A M10 Ø1 Ø M10 Ø1 Ø M10 Ø1 Ø M10 Ø1 Ø M10 Ø1 Ø1 M10 Ø1 Ø1 M10 Ø1 Ø1 M10 Ø1 Ø1 M10 Ø1 Ø M10 Ø1 Ø Ø1 Ø1 Ø Ø1 Ø1 Ø Ø1 Ø1 Ø M10 Ø1 Ø M10 Ø1 Ø M10 Ø1 Ø1 M10 Ø1 Ø1 M10 Ø1 Ø1 M10 Ø1 Ø M10 Ø1 Ø M10 Ø1 Ø M10 Ø1 Ø M10 Ø1 Ø M10 Ø1 Ø M10 Ø1 Ø Ø1 Ø1 Ø Ø1 Ø1 Ø Ø1 Ø1 Ø Ø1 Ø1 Ø0 M1 Ø1 Ø1 M1 Ø1 Ø1 M1 Ø1 Ø M1 Ø1 Ø M1 Ø1 Ø M1 Ø1 Ø M1 Ø1 Ø M1 Ø1 Ø M1 Ø1 Ø0 M1 Ø1 Ø0 Ø1 Ø1 Ø0 Ø1 Ø1 Ø0 Ø1 Ø1 Ø0 Ø1 Ø1 Ø0 Ø1 Ø1 Ø3 Ø1 Ø1 Ø Ø1 Ø1 Ø Ø1 Ø1 Ø Ø1 Ø1 Ø0 Ø1 Ø1 Ø0 Ø1 Ø1 Ø0 Ø1 Ø1 Ø0 Ø1 Ø1 Ø3 Ø1 Ø1 Ø3 Ø1 Ø1 Ø3 Ø1 Ø1 Ø3 Ø1 Ø1 Ø3 Weight [kg] Pump Pump + Motor.3 17.0 17.0. 1 1 1.3 19.3 1.6 1. 19. 19.1 13.7 5.1.1 13.9 5.3.3 1. 6.6.3 16..0 5.7 17.7 3. 19..0 31.9..3 0. 7. 6.7 3...1.5 17. 17. 1.0 19.0 1.3 1.9.3 1.3 13.5 5.3 5.9 3.6 1.9 3.7 7.6.5 33.3. 17.9. 33.9 19.0 3.5 35.0 19.7 39. 35.7.0 1.3 3.3.6.7 56.1 9. 56. 31. 5.6 35.. 1.0 9. 6. 19.5 31.3 9.0 1.9 39.7 3.6.0 3.5.0 3.5 0.0.6 9.9 3 5.9 61. 39.3 79.3 1. 1. 5. 5. 7. 9. 9. 9. 9. 9. 5 136.5 7. 6.9 3..9.9. 31. 5. 3. 7. 1. 1. 3.9.9 3.. 5.3 135.3 57.3 13.3 57. 1. 5.3 1.3 61.3.3
Vertical MultiStage Stainless Steel Pump Pump Type Pmax. [MPa] Motor [kw] H H H3 3~ E B 3~ C 3~ Dimension [mm] BM BL BY1 BW SA SG D1 D H SN D3 BF BH A Weight [kg] Pump Pump + Motor 56 7 5 77.3 5 5. 7 7 77 1 77 1 96 177 96 177 99 10 99 10 10 195 10 195 19 19 10 9 10 9 13 13 6 6 6 6 9 9 9 9 19 1 19 1 133 5 133 5 71.3 73. 1 1 16 99 10 99 10 10 19 10 19 1 9 1 9 133 63 133 63 139 3 139 3 16 31 16 31 1 33 1 31 6 36 6 36 70. 97. 77 7 1. 16. 93.5 1 93.5 1 99 19 99 19 99 19 99 0 10 9 10 9 6 6 6 6 1 0 1 0 1 0 1 0 136 136 136 36 136 36 139 39 139 39 139 39 3 10F5/. 3 F5/ 3 F5/.0 3 33F5/ 3 F5/ 3 3F5/ 3 0F5/ 3 53F5/ 3 F5/ 3 63F5/ 3 60F5/ 3 73F5/ 3 70F5/ 3 3F5/ 3 0F5/ 3 93F5/ 3 F5/ 3 103F5/ 3 F5/ 3 3F5/ 3 0F5/ 3 13F5/ 3 1F5/ 3 133F5/ 3 1F5/ 3 13F5/ 3 F5/ 5 F5/ 5 10F5/.0 5 F5/ 5 F5/ 5 3F5/ 5 F5/ 5 F5/ 5 0F5/ 5 5F5/ 5 F5/ 5 6F5/ 5 60F5/ 5 7F5/ 5 70F5/ 5 F5/ 5 0F5/ 5 9F5/ 5 F5/ 5 10F5/ 5 F5/ 6 F5/.0 6 10F5/ 6 F5/ 6 1F5/ 6 F5/ 6 33F5/ 6 3F5/ 6 31F5/ 6 F5/ 6 3F5/ 6 F5/ 6 1F5/ 6 0F5/ 6 53F5/ 6 5F5/ 6 51F5/ 6 F5/ 6 63F5/ 6 6F5/ 6 61F5/ 6 60F5/ 6 73F5/ 6 7F5/ 6 71F5/..0.0.0 93 3 3 57 57 6 6 799 799 7 7 95 95 93 93 991 991 1039 1039 107 107 35 35 9 9 16 16 55 55 61 61 1 1 93 93 965 965 10 10 96 96 169 169 131 131 55 56 61 79 79 1 1 1 1 93 93 93 93 67 6 6 3 3 3 3 3 3 3 3 57 57 57 57 60 60 60 60 6 6 3 3 3 3 57 57 60 60 6 3 3 3 3 3 57 57 57 60 60 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 10 70 70 70 70 05 05 05 05 70 70 05 05 05 05 05 05 05 05 70 70 05 05 05 05 05 05 05 05 05 05 05 13 19 19 19 19 6 6 6 6 6 6 6 6 6 6 6 6 66 66 66 66 31 31 31 31 19 19 6 6 6 6 6 6 66 66 31 31 31 31 31 31 31 31 19 19 6 6 6 6 6 6 6 6 66 66 31 31 31 31 31 31 31 31 31 31 31 170 10 0 170 10 0 170 10 0 170 10 0 170 10 0 170 10 0 170 10 0 170 10 0 170 10 0 170 10 0 170 10 0 170 10 0 170 10 0 170 10 0 170 10 0 170 10 0 170 10 0 170 10 0 170 10 0 170 10 0 170 10 0 170 10 0 170 10 0 170 10 0 170 10 0 170 10 0 170 10 0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø10 Ø1 Ø1 Ø1 Ø1 Ø1 Ø1 Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø0 Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø35 Ø35 Ø35 Ø35 Ø35 Ø35 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 6 6 6 6 6 6 Ø1 Ø1 35 Ø1 Ø1 35 Ø1 Ø1 35 Ø1 Ø1 35 0 Ø1 Ø1 35 0 Ø1 Ø1 35 0 Ø1 Ø1 35 0 Ø1 Ø1 35 3 Ø1 Ø1 35 3 Ø1 Ø1 35 3 Ø1 Ø1 35 3 Ø1 Ø1 35 3 Ø1 Ø1 35 3 Ø1 Ø1 35 3 Ø1 Ø1 35 3 Ø1 Ø1 35 3 Ø1 Ø1 35 3 Ø1 Ø1 35 3 Ø1 Ø1 35 3 Ø1 Ø1 35 3 Ø1 Ø1 35 3 Ø1 Ø1 35 3 Ø1 Ø1 35 3 Ø1 Ø1 35 00 Ø1 Ø1 35 00 Ø1 Ø1 35 00 Ø1 Ø1 35 00 Ø1 Ø1 5 Ø1 Ø1 5 Ø1 Ø1 5 0 Ø1 Ø1 5 0 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 00 Ø1 Ø1 5 00 Ø1 Ø1 5 00 Ø1 Ø1 5 00 Ø1 Ø1 5 00 Ø1 Ø1 5 00 Ø1 Ø1 5 00 Ø1 Ø1 5 00 Ø1 Ø1 5 Ø1 Ø1 5 0 Ø1 Ø1 5 0 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 3 Ø1 Ø1 5 00 Ø1 Ø1 5 00 Ø1 Ø1 5 00 Ø1 Ø1 5 00 Ø1 Ø1 5 00 Ø Ø1 5 00 Ø Ø1 5 00 Ø Ø1 5 00 Ø Ø1 5 00 Ø Ø1 5 00 Ø Ø1 5 00 * Dimensional details are provided for reference only. * All specifications are subject to change without prior notice. Note : 1~ : Single phase motor 3~ : Three phase motor EBARA Pumps Malaysia Sdn Bhd 6, Jalan TP3, UEP Subang Jaya Industrial Park, 76 Subang Jaya, Selangor, Malaysia. Tel : 03 66 Fax : 03 9355 Email : sales@ebara.com.my Website : www.ebara.com.my Authorised dealer: EPM