European Standardization System. Cinzia Missiroli CEN/CENELEC Programme Manager Port of Spain, 04 April 2011

Similar documents
The European Standardisation An important pillar for the quality

INTERNAL REGULATIONS PART 2: COMMON RULES FOR STANDARDIZATION WORK

EUROPEAN STANDARDIZATION SYSTEM

Vademecum on European Standardisation

IRS 1. Internal Rules of Standardization

MINISTRY OF ECONOMY. LAW ON STANDARDIZATION (Official Gazette of the Republic of Macedonia 54/02)

CEN/CENELEC Guide 10 Guidelines for the distribution and sales of CEN-CENELEC publications

Chapter One GENERAL PROVISIONS

European Committee for Standardization. European Committee for Electrotechnical Standardization. Avenue Marnix 17 B 1000 Brussels

OIML G 17 GUIDE. Edition 2015 (E) ORGANISATION INTERNATIONALE INTERNATIONAL ORGANIZATION. Guide for CIML Members DE MÉTROLOGIE LÉGALE

Standardization Process Manual

Standards in Trade Facilitation

STATUTORY INSTRUMENTS. S.I. No. 333 of 2011 EUROPEAN COMMUNITIES (ELECTRONIC COMMUNICATIONS NETWORKS AND SERVICES) (FRAMEWORK) REGULATIONS 2011

Operating Procedures for ASME U.S. Technical Advisory Groups for ISO Activities for TAGs Under BoS

Technical Barriers to Trade (TBT) Annex to the SADC Protocol on Trade

Introduction to IEC and its processes and procedures to develop IEC International Standards

Pocket Guide to Standards Development

IRS 2. Edition 4. Internal rules of standardization Part 2: Establishment and work of technical committees for standards and related documents

ANSI Essential Requirements: Due process requirements for American National Standards

Doc. Number: N New CEN Enquiry Procedure - resentation from CEN. Main changes: For information

Vademecum on European Standardisation

ANNEX I 1. Mutual recognition in relation to conformity assessment (Article 15) TABLE OF CONTENTS

CEN/ISSS WS/eBES: e-business Board for European Standardization

MUTUAL RECOGNITION OF STANDARDS IN TTIP:

Official Journal of the European Communities N L 139/19. (Acts whose publication is not obligatory) COUNCIL

Decree on Marine Equipment (925/1998; amendments up to 528/2004 included)

ANSI PROCEDURES FOR U.S. PARTICIPATION IN THE INTERNATIONAL STANDARDS ACTIVITIES OF ISO

Regulatory dialogue between Russia and the EU The political and economic context

ANSI PROCEDURES FOR U.S. PARTICIPATION IN THE INTERNATIONAL STANDARDS ACTIVITIES OF ISO

ISO INTERNATIONAL STANDARD. Footwear Test methods for uppers Water resistance. Chaussures Méthodes d'essai des tiges Résistance à l'eau

ISO/IEC Directives Part 1

132 ABRIDGED FINAL REPORT OF THE SIXTIETH SESSION OF THE EXECUTIVE COUNCIL

STANDARDS ASSOCIATION OF ZIMBABWE

ISO/IEC Directives, Part 1

TIA Procedures for American National Standards (PANS)

ISO National Mirror Committee Training

3 July 2003 EU TRADE POLICY ON TECHNICAL BARRIERS TO TRADE A NEW PUSH FOR THE REMOVAL OF TECHNICAL BARRIERS TO TRADE GLOBALLY.

CEFTA ISSUES PAPER 4. Elimination of Non-Tariff Barriers in CEFTA

PARTICIPATION IN NATIONAL MIRROR COMMITTEES AND ISO STANDARDS DEVELOPMENT COMMITTEES

ISO INTERNATIONAL STANDARD. Footwear Test methods for uppers Tensile strength and elongation

ANSI Essential Requirements: Due process requirements for American National Standards

TECHNICAL BARRIERS TO TRADE CHAPTER

CONSOLIDATED VERSION OF THE EOTA STATUTES April

ISO/IEC Directives Part 1

Article 4 Preparation, Adoption and Application of Standards

UPDATE ON THE IMPLEMENTATION OF THE NEW LEGISLATIVE FRAMEWORK

Presented at the Closing Plenary Session on 11 September 2006

ECC. Rules of Procedure for the Electronic Communications Committee. (and its subordinate entities) Edition 11. Split, June 2011 CEPT

REGULATION ON THE APPROVAL AND IMPORTATION OF TELECOMMUNICATIONS EQUIPMENT CONNECTED TO PUBLIC TELECOMMUNICATIONS NETWORKS. Article 1 Definitions

ASEAN Guidelines for Harmonisation of Standards

Overview of the WTO TBT Agreement. Diane C. Thompson Principal Standards Advisor Standards Alliance. Lusaka, Zambia November 30, 2016

STATUTES of the UNITED STATES NATIONAL COMMITTEE of the INTERNATIONAL ELECTROTECHNICAL COMMISSION (USNC/IEC)

ECC. Rules of Procedure for the Electronic Communications Committee. (and its subordinate entities) Edition 15

RULES OF PROCEDURE. The Scientific Committees on. Consumer Safety (SCCS) Health and Environmental Risks (SCHER)

Screening report Croatia

ANSI-Accredited Standards Developer

Cross Border recognition of authentication methods/electronic signatures

Liaisons Report by the BIML Additional information

NTAG OPERATING PROCEDURES

Article 1 General principles and objectives

ISO/IEC Directives, Part 1 Procedures for the technical work

ISO/IEC Directives, Part 1 Consolidated ISO Supplement Procedures specific to ISO

NEW LEGISLATIVE FRAMEWORK (NLF) ALIGNMENT PACKAGE (Implementation of the Goods Package) Proposal for a

IEC ISO ITU. Guidelines for Implementation of the Common Patent Policy for ITU-T/ITU-R/ISO/IEC

onem2m Partnership Agreement

DIRECTIVE ON ALTERNATIVE DISPUTE RESOLUTION FOR CONSUMER DISPUTES AND REGULATION ON ONLINE DISPUTE RESOLUTION FOR CONSUMER DISPUTES

Checklist for a Consortium Agreement for ICT PSP projects

etendering International standards project

SMIIC DIRECTIVES, PART 1 PROCEDURES FOR THE TECHNICAL WORK. (SECOND EDITION, April 2019)

STATUTORY INSTRUMENTS. S.I. No. 69 of 2017 EUROPEAN COMMUNITIES (ELECTROMAGNETIC COMPATIBILITY) REGULATIONS 2017

ISA Standards and Practices Department

Overview on the implementation of the Canada-EU Comprehensive Economic and Trade Agreement

UNICE COMMENTS ON NON-TARIFF BARRIERS TO TRADE: TECHNICAL BARRIERS TO TRADE

AIIM Standards Development for ANSI Approved Documents

2010/SCSC/WKSP1/004 APEC Toy Safety Initiative: Survey Results

Ordinance on electrical low-voltage equipment

ICT & Innovation in International Trade. UN/CEFACT s Experience

Chapter 7. Technical Barriers to Trade. For the purposes of this Chapter, the definitions of Annex 1 of the TBT Agreement shall apply.

IECEE PUBLICATION IECEE 01-S. IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System)

The Development and Revision of FSC Normative Documents FSC-PRO V3-1 EN

Organization and Procedures for the Committee on Standardization of Oilfield Equipment and Materials: Policy Document

CDSG Cultural Diversity Steering Group Secretariat: Standards Norway, P.O.Box 242, NO-1326 Lysaker, Norway Secretary: Håvard Hjulstad,

Arrangement establishing the European Conference of Postal and Telecommunications Administrations (CEPT)

SIERRA LEONE STANDARDS BUREAU

E15 Initiative on Regulatory Systems Coherence. Private standards Implications for trade, development and governance

AIAA STANDARDS PROGRAM PROCEDURES

Working Methods for the Electronic Communications Committee (and its sub-ordinate entities)

ASIS INTERNATIONAL STANDARDS & GUIDELINES. September 2015

STATUTES AND RULES OF PROCEDURE

Second wave of biometric ID-documents in Europe: The Residence Permit for non-eu/eea nationals

INTERNATIONAL STANDARD

President's introduction

Opinion of the European Banking Authority on cooperation with third countries Article 161(7) CRD

RULES AND PROCEDURES OF THE SOUTH AFRICAN NATIONAL COMMITTEE (SANC) 1. INTRODUCTION

Draft ETSI EN V2.0.6 ( )

Reference Manual. Standards Committee. Original: June 28, 2011 Latest Revision: January 24, 2018

ACCREDITED STANDARDS COMMITTEE (ASC) Z540 OPERATING PROCEDURES 2016

The GSO's role in Standardizing the issues related to Halal in the region

DIRECTIVES. DIRECTIVE 2009/48/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 18 June 2009 on the safety of toys. (Text with EEA relevance)

Role of TC/SC Officers

Transcription:

European Standardization System Cinzia Missiroli CEN/CENELEC Programme Manager Port of Spain, 04 April 2011 1

European Standards CEN & CENELEC systems Standards development process Links to legislation International dimension

What is a standard? It is an agreed, repeatable way of doing something... A document established by consensus and approved by a recognized body that provides for common and repeated use, rules, guidelines or characteristics for activities or their results, aimed at the achievement of the optimum degree of order in a given context ISO/IEC Guide 2:1996 CEN-CENELEC 2010 3

What is a standard? It is a document voluntary in application established by all interested parties reflects consensus approved by a recognized body meant for common and repeated use National Standards (i.e. BS; DIN, NF, AS) International Standards (i.e. ISO, IEC) European Standards (i.e. EN)

What European standards do? enhance the safety of products allow economies of scale help manufacturers comply with European legislation promote the interoperability of products and services encourage greater competition facilitate trade by removing trade barriers promote ecological safety and sustainability help safeguard the environment aid the transfer of research promote common understanding

Why is a European Standard so valuable? Strength and recognition because Shaped by those who contribute Open and transparent process Market driven Representation of all interested parties Reached through agreement One European Standard = 30 national standards = access to a market of over 480 million people Integrate with international work

Some types of European standard Test and measurement standards Measure content or parameter Product standard Specify product performance Management standards Models for managing activities A. Ganesh & M. Denis CEN/CLC StandardDays, 2010-09-23

A fact to remember 1 European standard Replaces 31 different national standards in Europe Creates access to a market of 500 million 8

European Standards CEN & CENELEC systems Standards development process Links to legislation International dimension

The European Standardization Organizations (ESOs) CEN... (European Committee for Standardization) CENELEC... (European Committee for Electrotechnical Standardization) ETSI... (European Telecommunications Standards Institute)

CEN and CENELEC in Europe and beyond ISO Memoranda of Understanding with regional bodies IEC Partner Standardization Bodies Affiliates CEN Associates EC/EFTA National Members Technical Assistance Programmes CENELEC Cooperating Partners Europe Affiliates Beyond Europe

What do we STANDARDISE? CEN-CENELEC Portfolio per business domain CEN-CENELEC 2010-12

CEN/CENELEC Product Range (Deliverables) Standards European Standard EN Pre-Standards Technical Specification - TS Informative Technical Report - TR CEN/CENELEC Guide Workshop Agreement CEN/CENELEC Workshop Agreement (CWA)

Deliverables High consensus European Standard (EN) Participation through Membership Public enquiry + weighted vote Time to market = 2,5 years To be implemented by all Members as the national standard + withdrawal of all conflicting national standards Ideal reference for use as complement to European legal framework (New Approach Directives presumption of conformity + reference in other Directives) Nearly 4000 CEN & CENELEC link to OJ CEN-CENELEC 2010 14

Deliverables Limited consensus CEN-CENELEC Workshop Agreement (CWA) Identified request for developing specification Simple agreement on developed text (may involve public enquiry using web) Very fast (can be virtually immediately) Deliverable bears CEN-CENELEC logo but no implementation requirement Take it or leave it A few are used in European (ICT) regulatory context CEN-CENELEC 2010 15

CEN Technical Specification A document that gives rules and requirements Can be beneficial New technologies No immediate need for a European Standard Simple development process A Technical Specification can be transformed into a European Standard

System main interactions Affiliates EC Europe Associates CEN - CENELEC EFTA National NSB NSB NSB NSB NSB NSB NSB NSB NSB NSB Industry NGO Industry NGO Industry NGO Industry

CEN & CENELEC All National Members are members of all TCs Other members may join in an observer capacity Official languages are English, French and German Development through discussion leading to consensus Final decisions reached by weighted vote Standards must be adopted as National Standards even if the country voted against the draft

European Standards CEN & CENELEC systems Standards development process Links to legislation International dimension

Q. Who can propose a new standard? A. Everyone who has a need Business Manufacturers Users Consumers Regulators Non-Governmental Organizations Partner organizations SME Affiliates... CEN-CENELEC 2010 20

Q. Who can handle a proposal? A. CEN & CENELEC members A. The CEN CENELEC Management Centre Programme Managers Innovation CEN-CENELEC 2010 21

Q. Who writes the standard? A. Volunteers Technical experts Coordinated through national members In technical committees Guided by CCMC & national members CEN-CENELEC 2010 22

The mechanism National Members send delegates that represent national point of view of all involved parties Technical body Management decisions Observers send representatives that participate to the debate (Associate Members, Cooperating Partners, European Commission, EFTA, organizations in technical liaison) Members send experts Working Group Standardization work Observers send experts Name of Presenter Title of event, date (yyyy-mm-dd) CEN-CENELEC 2010 23

Participation in the standardization process CEN Technical or Project Committee DELEGATION DELEGATIO N DELEGATION National Standardization Body National Standardization Body National Standardization Body Experts in a specific field representing: industry, trade associations, government, consumer, academia, customers, etc 24

How are standards made? 1. Proposal evaluate and decide 2. Draft and build agreement 3. Public enquiry generate comments 4. Consider comments 5. Approve the final draft 6. Publish the standard 7. Review: confirm / revise

The standardization process (EN) Technical or Project Committee National Standards Bodies, Associates Technical or Project Committee TIMEFRAME: 3 YEARS National Standards Bodies PROJECT PROPOSAL Draft Standard Enquiry (circulation for Comments ) consolidation of comments Formal vote (weighted vote) European Standard NATIONAL IMPLEMENTATION 26

Maintenance of standards Reviewed every 5 years (at the latest) Ensure standard still current Options confirm withdraw amend or revise

Where can I buy a European Standard? From National Standards Bodies European Standards are published as national standards CEN & CENELEC work in 3 official languages English French German European Standards can be translated into other languages

European Standards CEN & CENELEC systems Standards development process Links to legislation International dimension

European standards can support EU policies and legislation They can help business to comply with requirements established by EU legislation (New approach/new Legal framework) in sectors such as toys, pressure equipment, electromagnetic compatibility, machinery, lifts, construction products...

EN - Link with the law LAW Mandate FORMAL STANDARDS COMPANY STANDARDS CEN-CENELEC 2010 31

New Approach Basic Principles EC Directives define essential requirements (ex. safety) indicate desired outcome WITHOUT specifying how it should be achieved Reference to standards Standards organizations develop or approve harmonized standards EN s set out technical specifications to meet directives essential requirements Conformity assessment (CA) policy Standards are voluntary Manufacturers do not have to follow EN IF they follow = presumption of conformity (CE marking) In many cases opens way for CA without 3rd party intervention

The standards-based co-regulation in Europe Mandatory Voluntary Directive Essential requirements EC Mandate to CEN European Standard OJ citation Harmonized EN = presumption (proof) of conformity to mandatory essential requirements 33

Referenced European Standards CEN-CENELEC 2010 34

Supporting European legislation CEN-CENELEC 2010-35

European Standards CEN & CENELEC systems Standards development process Links to legislation International dimension

A Model With An International Approach Vienna Agreement ~ 30 % of CEN standards are developed under the Vienna Agreement (depending on sectors) Dresden Agreement ~ 80 % of CENELEC standards are identical to or based on IEC standards MoU for telecommunications sector (ITU-T) Agreement on radio-communication sector (ITU-R) CEN-CENELEC 2011 37

Integration of regional and global standardization Vienna Agreement signed between ISO and CEN in 1991 (Dresden Agreement between CENELEC and IEC): To adopt International Standards in Europe whenever possible No duplication of work Types of cooperation between ISO and CEN: Correspondence Mutual representation at meetings Adoption of same text as ISO and European standard: Adoption by CEN of an available ISO Standard and vice versa Elaboration of a standard in one organization, parallel ISO/CEN approval procedure

Opening Up The European System CEN and CENELEC have harmonized their formal relations with third countries Affiliate status for the Standardization Organizations of countries listed in the European Neighbourhood Policy Partner Standardization Bodies for all other Standardization Organizations. Memoranda of Understanding for regional level Moreover, CEN, CENELEC and ETSI are increasingly joining forces for international visibility actions CEN-CENELEC Sarah Penny, 2011 EC 39 Info Session 2011-01-27

Activities With Rest Of The World Example of joint agreements SAC - Standardization Administration of China Korean Agency for Technology and Standards MoUs being aligned CEN-CENELEC Sarah Penny, 2011 EC 40 Info Session 2011-01-27

MoUs And Cooperation Agreements Pan American Standards Commission Arab States of the Gulf (GSO) SADCSTAN Exchange of information and work programme Participation in meetings New trend: ESOs MoUs CEN-CENELEC Sarah Penny, 2011 EC 41 Info Session 2011-01-27

Thank you! Questions? www.cen.eu www.cenelec.eu Cinzia Missiroli CEN/CENELEC Programme Manager cmissiroli@cencenelec.eu +32.2550.0879 CEN-CENELEC 2010 42