OERATING LIMITS Flow up to: Head up to: 9 m CE Service pressure up to: up to bar* Temperature: min: C* / max: C* *: depending on model NESD / NESE SINGLE-STAGE SELF-COOLED CENTRIFUGAL UMS TO STANDARD EN (NE ) High-temperature water ALICATIONS H mce NESD / NESE ump for transferring and circulating hot water at temperatures up to C. Designed for use in the following fields: Energy production H.V.A.C General industry, plastics, paint, textiles, paper, etc. ATEX version possible Q ADVANTAGES - Hydraulic performance and connection dimensions compliant with standard EN. - Self-cooled pump requiring no additional cooling system for seals or casing cover. - Hydraulics in ductile GS cast iron GGG-. (MG version). - Easy maintenance with the «process» system, which allows moving parts to be removed without disconnecting the pump casing (with the spacer coupling option). - Flanges with double female socket joints compliant with standard EN 9-. N.T. 9-/ENG - Ed. /-
DESIGN SIMLIFIED UM IDENTIFICATION ump: - Centrifugal, single stage, horizontal. Axial suction, radial discharge upwards. - Mounting feet under the pump casing. - A thermal barrier separates the pump from the shaft outlet seal. This lowers the temperature in the mechanical-seal chamber without the need for an additional cooling system. - Sealed with a standardised non-cooled mechanical seal fitted directly to the shaft. - Impeller diameter adaptable to obtain the duty point required. Motor : - To IEC and DIN/VDE standard Speed : to 9 rpm Voltage : / V above : / 9V Frequency : Hz - Hz* Insulation class : (F) rotection : I EC compliance : EN 9 * (lease contact us) ump type D= N ; E = N Discharge-flange diameter Nominal impeller dimension Model and material (MG = GS cast iron) DESCRITION Flange connection Flanges with double female socket joints compliant with standard EN 9-. Grease-lubricated ball bearing on the drive end and journal bearing lubricated with the pumped liquid on the impeller end. Limits of temperature: NESD: from C to C NESE: from C to C Maximum authorised pressure levels: NESD: bar C max. NESE: bar from to C bar from to C bar from to C NES E - MG REMINDER : Maximum authorised casing pressure = pump pressure at suction end + pressure at discharge end with zero flow. Note: technical recommendations and safety precautions must be followed. (Refer to the commissioning instructions) Flange positioning: axial suction flange, upwards radial discharge flange. Repère Designation Materials Construction material code EN DIN EN NESD NESE. Volute casing GGG.* EN-GS. Lantern GGG. EN-GS GGG. EN-GS. Casing cover GS-C G GH. Shaft. X Cr X Cr. Impeller GG- EN-GJL GGG-. EN-GS. Bearing housing GS-C G GH. Mechanical seal SIC/Carbone. Mechanical-seal chamber GG- EN-GJL. Shaft sleeve. XCrNiMoTi--.9 Sliding bearings SIC/SIC * Volutes of the NESE sizes -, - and - are built in GS-C
DESCRITION (CONT.) Casing seal: - Models are sealed using reinforced-graphite flat gaskets. Shaft seal : - Normalized balanced mechanical seal, seal faces SIC/carbon, EDM seal. Motor power: - As standard, NESD/NESE pumps are equipped with B electric motors. - To determine the drive power, we recommend the following safety margins : Up to : +% From to, : +% above, : +% Maximal speed : You must not exceed the following maximum speeds for the different pump sizes: Size - - - - - - - - - - - - Max. speed (rpm) Size - - - - - - - Max. speed (rpm) Size - - - - - - Max. speed (rpm) SECTIONAL DRAWING ARTS LIST. - Volute casing. - Lantern. - Casing cover. - Shaft. - Impeller. - Bearing housing. - Mechanical seal. - Mechanical-seal chamber. - Shaft sleeve.9 - Sliding bearings 9
SECTIONAL DRAWING (CONT.) Thermal barrier : A double thermal barrier behind the centrifugal impeller enables a significant reduction in the temperature of the pump drive and mechanical-seal chamber. This enables use of a seal without an external cooling system. Calorific loss is also efficiently reduced. C TEMERATURE REDUCTION CURVE DESIGN SECIFICATION Casing Open on drive side to enable the mechanical assembly to be dismounted from behind. Mounting feet under the volute casing. Axial suction, radial discharge upwards. Flanges with double female socket joints to standard EN 9-. (NESD: N - NESE: N). Casing cover Designed to limit heat transfer to the mechanical-seal chamber. The volume of liquid in the mechanical-seal chamber enables the pump to self-cool up to its maximum temperature ( or C depending on the model). Bearings Journal bearing near the impeller limits vibrations. Grease-lubricated ball bearing on the drive end designed specifically to resist high temperatures. Maximum authorised power: Shaft Amply dimensioned with shaft sleeve for longer mechanical-seal service life. Shaft seal Standardised mechanical seal with shaft sleeve, adapted to the liquid being pumped. No servicing required during operation. Impeller High-efficiency GG cast-iron closed radial impeller with back seal and balance holes. Adapted (cropped) on request to comply with the Q/H required for the application. Coupling Standard, semi-elastic coupling. Can be fitted with a spacer coupling on request. aint High-temperature-resistance aluminium paint.
HYDRAULIC RESELECTION GUIDE poles t tr/min - - -* -* -* - - - - - - - - - - - - - - - - - - - - * disponible uniquement en version NESE - page - page - page - page - page - page - page - page - page - page - page - page - page 9 - page 9 - page 9 - page 9 - page - page - page - page - page - page - page - page - page poles - page - page - page - page - page - page - page - page - page - page - page - page - page - page - page - page - page - page - page t - - - - - - - - - - - - - - - - - - - 9 tr/min
HYDRAULIC ERFORMANCE poles -, RM 9 Ø Ø Ø Ø % NES - 9 Ø Ø Ø9 Ø NES -.%,,, Ø Ø Ø Ø p,,,,, Ø Ø Ø9 Ø 9 9 Ø Ø Ø Ø Ø NES - % 9 Ø Ø Ø Ø 9 NES - % 9 Ø Ø,,9,, Ø Ø Ø,,,,,, Ø Ø Ø Ø 9
HYDRAULIC ERFORMANCE poles -, RM Ø Ø Ø9 Ø % NES - Ø Ø Ø Ø Ø NES - 9 % 9 9 Ø, Ø Ø9, Ø,, Acier Fonte m/h Ø, Ø Ø, Ø Ø,, Ø Ø Ø Ø9 Ø NES - 9% 9 Ø Ø Ø Ø NES -,% Ø, Ø Ø, Ø9, Ø,,,,9,,,,,,, Ø Ø Ø Ø
HYDRAULIC ERFORMANCE poles -, RM 9 Ø Ø Ø9 Ø 9 % NES - 9 Ø Ø Ø Ø Ø NES - %, Ø Ø Ø Ø,, Ø9 Ø Ø Ø Ø, Ø Ø Ø Ø9 Ø % NES - 9 Ø Ø Ø Ø 9 NES - % 9 Ø Ø Ø Ø9 Ø, Ø Ø, Ø Ø,
HYDRAULIC ERFORMANCE poles -, RM 9 Ø Ø Ø9 Ø NES - % Ø Ø Ø Ø Ø NES - %, Ø Ø Ø Ø Ø,, Ø9 Ø Ø Ø, Ø Ø Ø Ø9 Ø 9 % NES -* 9 9 Ø Ø Ø Ø NES - % Ø Ø Ø Ø9 Ø Ø Ø Ø Ø 9 9 * disponible uniquement en version NESE 9
HYDRAULIC ERFORMANCE poles -, RM 9 Ø Ø Ø9 Ø NES - 9% Ø Ø Ø Ø Ø NES - % Ø Ø Ø9 Ø Ø Ø Ø Ø Ø 9 9 Ø Ø Ø Ø9 Ø Ø NES -* 9 Ø % Ø Ø 9 9% NES - 9 Ø Ø Ø 9 Ø9 Ø Ø Ø Ø Ø * disponible uniquement en version NESE
HYDRAULIC ERFORMANCE poles -, RM Ø NES - Ø NES - Ø Ø % 9% Ø Ø9 Ø Ø Ø 9 Ø Ø Ø Ø Ø Ø Ø Ø9 Ø Ø Ø Ø Ø9 Ø 9 % NES -* 9 Ø Ø Ø Ø9 Ø 9 NES - % 9 Ø Ø Ø Ø Ø9 Ø Ø Ø Ø9 Ø * disponible uniquement en version NESE
HYDRAULIC ERFORMANCE poles -, RM Ø Ø Ø Ø Ø NES - % Ø Ø Ø Ø Ø
HYDRAULIC ERFORMANCE poles -,9 RM Ø Ø Ø Ø NES - % Ø Ø Ø9 Ø NES -, p Ø Ø Ø Ø Ø Ø Ø9 Ø 9 Ø Ø Ø Ø Ø NES - % Ø Ø Ø Ø 9 NES - % 9 Ø Ø 9 Ø Ø Ø Ø Ø Ø Ø m/h
HYDRAULIC ERFORMANCE poles -,9 RM Ø Ø Ø9 Ø % NES - 9 Ø Ø Ø Ø Ø 9 NES - % 9 Ø Ø Ø9 Ø Acier Fonte Ø Ø Ø Ø Ø Ø Ø Ø Ø NES -.% Ø Ø Ø9 Ø 9 NES - % 9 Ø Ø Ø Ø Ø Ø Ø9 Ø
HYDRAULIC ERFORMANCE poles -,9 RM 9 Ø Ø Ø NES - % Ø Ø Ø 9 NES - % 9 Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø9 Ø NES - % 9 Ø Ø Ø Ø Ø NES - % Ø Ø Ø Ø Ø Ø9 Ø Ø Ø
HYDRAULIC ERFORMANCE poles -,9 RM Ø Ø Ø Ø NES - % Ø Ø Ø9 Ø NES - 9% Ø Ø Ø Ø Ø Ø Ø9 Ø 9 Ø Ø Ø Ø Ø 9 NES - % 9 Ø Ø Ø Ø 9 NES - 9% 9 Ø Ø Ø Ø Ø Ø Ø Ø Ø
HYDRAULIC ERFORMANCE poles -,9 RM Ø Ø Ø9 Ø NES -.% 9 Ø Ø Ø Ø Ø NES - % Ø Ø Ø9 Ø Ø uissance maximale moteur Ø Ø Ø Ø Ø Ø Ø Ø9 9 9 NES - % 9 Ø Ø 9 uissance maximale moteur Ø Ø Ø9 Ø m /h
DIMENSIONS - BARE-SHAFT UM Modèle Model Dimensions ump dimensions pompes Dimensions Support / foot pattes/support dimensions Bout Shaft d arbre end Weight oids DN DN a f h h b c m m n n s* s* w x d l t u - 9 M M - 9 M M - 9 M M 9-9 M M - 9 M M - 9 M M - 9 M M 9 - M M - M M v - 9 M M - 9 M M - 9 M M - 9 M M - M M - M M - 9 M M - 9 M M 9 - M M - M M - M M - M M - M M - M M - M M - M M DN/DN D Øk 9 d x nbr 9x 9x 9x 9x 9x x x x d -, 9 d +, f +, ) Transnorm pump sizes not included in DIN / EN *Slots suitable for bolts with dimensions indicated
DIMENSIONAL DIAGRAMS DIMENSIONS Groups without spacer L L a f x DN LM L L X LM a DN f Hs DN HM H H H Hs DN HM H H H n x Ød L S L L L B B DIMENSIONS Groupes with spacer n x Ød L S L L L B B 9
DIMENSIONS - MOTOR UNIT -, RM WITHOUT SACER COULING L L a f x DN LM Hs DN HM H H H n x Ød L S L L L B B Model Speed Spacer Type DN DN a f L L L L L S x LM HM Hs H h h B B nxød Weight -, No B 9 x9, -, No B x9, -, No B x9, -, No B x9, -, No B x9, -, No B 9, x, -, No B 9 9, 9 x, -, No B 9 9, x 9, -, No B 9 x9,9 -, No B x9, -, No B x9, -, No B x9, -, No B x9, -, No B 9 x9,9 -, No B 9 x9, -, No B x9,9 -, No B 9 9, x, -, No B 9 9, 9 x, -, No B 9 9, x, - No B 9 9, x 9, -, No B 9, 9 x 9, - No B 9, 9 x, - No B 99, 9 9 9 x, -, No B9, 9 9 x,9 -, No B x9 9, -, No B x9, -, No B 9 x9, -, No B 9 x9, -, No B 9 x9, -, No B 9 x9, -, No B x9 9, - No B x9, -, No B 9 9, 9 x, -, No B 9 9, x, - No B 9 9, x 9, - No B 9 99, 9 9 x, - No B 99, 9 9 9 x 9, -, No B9, 9 9 x, -, No B9 9, 9 9 9 x, - 9 No B9 9, 9 9 9 x 9, -, No B 9, 9 x9, -, No B 9 9, 9 9 x9,9 -, No B 9 9, 9 x9, -, No B 9 9, 9 x, -, No B 9 9, x 9, - No B 9 9, x 9, - No B 9 99, 9 9 x, - No B 9 x,
DIMENSIONS - MOTOR UNIT -, RM WITHOUT SACER COULING (CONT.) Model Speed Spacer Type DN DN a f L L L L L S x LM HM Hs H h h B B nxød Weight - No B 9 9 9 x, -, No B9 9 9 x, -, No B9 9 9 9 9 x 9,9 -, No B9 9 9 x, -, No B9 9 9 9 9 x, - 9 No B9 9 9 9 9 x,9 - No B9 9 9 x, - No B 9 x 9, -, No B 9 x, -, No B 9 9, x, -, No B 9 9, 9 x, -, No B 9, x, - No B 9, x 9, - No B 9, 9 9 x, -, No B, 9 x, - No B, 9 x,9 - No B, 9 9 9 x, -, No B9, 9 9 x, - No B 9 9 9 x 9, -, No B9 9 9 x, -, No B9 9 9 9 9 x, - 9 No B9 9 9 9 9 x,9 -, No B9 9 9 9 9 x,9-9 No B9 9 9 9 9 x, - No B9 9 9 x, - No B 9 x 9,9 -, No B 9 x, - No B 9 x, - No B 9 9 9 x 9, -, No B9 9 9 x, -, No B 9 x, - No B 9 x, - No B 9 9 9 x, -, No B9 9 9 x, -, No B9 9 9 9 9 x, -, No B9 9 9 x 9, -, No B9 9 9 9 x, - 9 No B9 9 9 9 x,9 - No B9 9 9 x, - No B 9 x 9, - No B9 9 9 x,9 - No B 9 x, -, No B 9 x, - No B 9 x 9, - No B 9 9 x, -, No B9 9 9 9 x, - 9 No B9 9 9 9 x, - No B9 9 9 x 9, - No B 9 x, -, No B9 9 9 9 x, - 9 No B9 9 9 9 x,9 - No B9 9 9 x 9, - No B 9 x, -, No B 9 x,
DIMENSIONS - MOTOR UNIT -,9 RM WITHOUT SACER COULING L L a f x DN LM Hs DN HM H H H n x Ød L S L L L B B Model Speed Spacer Type DN DN a f L L L L L S x LM HM Hs H h h B B nxød Weight -, 9 No B x9, -, 9 No B 9 9 x9, - 9 No B x9, - 9 No B x9,9-9 No B x9, - 9 No B x9, -, 9 No B9 9 9 x9, -, 9 No B9 9 9 x9, -, 9 No B9 9, 9 x, - 9 9 No B9 9, 9 9 x, - 9 No B9, 9 9 x, - 9 No B9, 9 9 x, -, 9 No B 9 9 x9, - 9 No B x9,9-9 No B x9,9 -, 9 No B9 9 9 x9, -, 9 No B9 9 9 x9, - 9 No B x9, -, 9 No B9 9 9 x9, -, 9 No B9 9 9 x9, - 9 9 No B9 9 99 9 9 9 x9 9, - 9 No B9 9 9 x, - 9 No B9 9 9 x, -, 9 No B9 9, 9 x,9-9 9 No B9 9 9, 9 9 x, - 9 No B9, 9 9 x,9-9 No B9, 9 9 x, -, 9 No B9, 9 x, - 9 No B x9, - 9 No B x9, -, 9 No B9 9 9 x9 9, -, 9 No B9 9 9 x9, - 9 9 No B9 9 99 9 9 9 x9 9, - 9 No B9 9 9 x,9 -, 9 No B9 9 9 x9, - 9 9 No B9 9 99 9 9 9 x9 9, - 9 No B9 9 9 x, - 9 No B9 9 9 x, -, 9 No B9 9 x, - 9 No B 9 x, - 9 No B9, 9 9 x, -, 9 No B9, 9 x, - 9 No B, 9 x, - 9 No B, 9 9 x, -, 9 No B9 9, 9 x, -, 9 No B9 9, 9 x, - 9 9 No B9 9 9, 9 9 x, - 9 No B9, 9 9 x,
DIMENSIONS - MOTOR UNIT -,9 RM WITHOUT SACER COULING (CONT.) Model Speed Spacer Type DN DN a f L L L L L S x LM HM Hs H h h B B nxød Weight - 9 No B9, 9 9 x 9, -, 9 No B9, 9 x, - 9 No B9, 9 9 x, - 9 No B9, 9 9 x 9, -, 9 No B9, 9 x, - 9 No B, 9 x, - 9 No B, 9 9 x 9, -, 9 No B9 9 x, - 9 No B 9 9 x 9, - 9 No B 9 9 9 x 9, - 9 No B 9 9 9 x 9, - 9 No B 9 9 x9, -, 9 No B9 9, 9 x, - 9 9 No B9 9 9, 9 9 x, - 9 No B9, 9 9 x 9, - 9 No B9, 9 9 x, -, 9 No B9, 9 x,9-9 No B 9, 9 x, - 9 No B9, 9 9 x,9 -, 9 No B9, 9 x, - 9 No B 9, 9 x, - 9 No B 9, 9 9 x 9, - 9 No B 9, 9 9 x, - 9 No B 9 9 9 x, - 9 No B 9 9 9 x, - 9 No B 9 9 x9,9-9 No B 9 x9, - 9 No B x9,9 -, 9 No B9 9 x, - 9 No B 9 9 x, - 9 No B 9 9 9 x, - 9 No B 9 9 9 x, - 9 No B 9 9 x9, -, 9 No B9 9 x,9-9 No B 9 9 x 9, - 9 No B 9 9 9 x 9, - 9 No B 9 9 9 x, - 9 No B 9 9 x9, - 9 No B 9 x9, - 9 No B 9 9 x, - 9 No B 9 9 9 9 x9,9-9 No B 9 9 x9, - 9 No B x9,9-9 No B 9 9 x9, - 9 No B x9,
DIMENSIONS - MOTOR UNIT -,9 RM WITH SACER COULING L L X LM a DN f Hs DN HM H H H n x Ød L S L L L B B Model Speed Spacer Type DN DN a f L L L L L S x LM HM Hs H h h B B nxød Weight -, Yes H 9 x9, -, Yes H x9, -, Yes H x9, -, Yes H x9, -, Yes H 9 x9, -, Yes H 9 9, x, -, Yes H 9 9, 9 x, -, Yes H 9, x 9, -, Yes H 9 x9, -, Yes H x9, -, Yes H x9, -, Yes H 9 x9, -, Yes H x9 9, -, Yes H 9 x9, -, Yes H 9 9 9 9 x9, -, Yes H 9 9 9 x9, -, Yes H 9, x, -, Yes H 9 9, 9 x, -, Yes H 9, x 9, - Yes H 9, x 9, -, Yes H, 9 x, - Yes H, 9 x, - Yes H 9, 9 9 9 x, -, Yes H9, 9 9 x, -, Yes H x9, -, Yes H x9,9 -, Yes H 9 x9, -, Yes H 9 9 9 9 x9, -, Yes H 9 x9, -, Yes H 9 9 9 9 x9, -, Yes H 9 9 9 x9, - Yes H 9 9 9 x9, -, Yes H 9 9, 9 x, -, Yes H 9, x 9, - Yes H 9, x 9, - Yes H 9 9, 9 9 x, - Yes H 9, 9 9 9 x 9, -, Yes H9, 9 9 x, -, Yes H9 9, 9 9 9 x,9-9 Yes H9 9, 9 9 9 x, -, Yes H 9 9, 9 x9, -, Yes H 9 9, 9 x, -, Yes H 9, x, -, Yes H 9 9, 9 x, -, Yes H, 9 x, - Yes H, 9 x, - Yes H, 9 9 9 x, - Yes H 9 x,
DIMENSIONS - MOTOR UNIT -,9 RM WITH SACER COULING (CONT.) Model Speed Spacer Type DN DN a f L L L L L S x LM HM Hs H h h B B nxød Weight - Yes H 9 9 9 x, -, Yes H9 9 9 x, -, Yes H9 9 9 9 x, -, Yes H9 9 9 x 9,9 -, Yes H9 9 9 9 x, - 9 Yes H9 9 9 9 x, - Yes H9 9 9 9 x, - Yes H 9 x9, -, Yes H 9 9 x9, -, Yes H 9 9, x, -, Yes H 9 9, 9 x 9, -, Yes H, 9 x, - Yes H, 9 x, - Yes H, 9 9 9 x, -, Yes H, 9 x, - Yes H, 9 x, - Yes H, 9 9 9 x, -, Yes H9, 9 9 x 9, - Yes H 9 9 9 x 9, -, Yes H9 9 9 x, -, Yes H9 9 9 9 x, - 9 Yes H9 9 9 9 x, -, Yes H9 9 9 9 x, - 9 Yes H9 9 9 9 x 9, - Yes H9 9 9 9 x, - Yes H 9 x9 9, -, Yes H 9 x, - Yes H 9 x, - Yes H 9 9 9 x 9, -, Yes H9 9 9 x,9 -, Yes H 9 x, - Yes H 9 x, - Yes H 9 9 9 x, -, Yes H9 9 9 x, -, Yes H9 9 9 9 x, -, Yes H9 9 9 x, -, Yes H9 9 9 9 x 9, - 9 Yes H9 9 9 9 x, - Yes H9 9 9 x, - Yes H 9 9 x9, - Yes H9 9 9 x, - Yes H 9 9 x9, -, Yes H 9 9 x9, - Yes H 9 9 x9, - Yes H 9 9 9 x9 9,9 -, Yes H9 9 9 9 x, - 9 Yes H9 9 9 9 x, - Yes H9 9 9 x 9, - Yes H 9 9 x9, -, Yes H9 9 9 9 x 9, - 9 Yes H9 9 9 9 x, - Yes H9 9 9 x 9, - Yes H 9 9 x9, -, Yes H 9 9 x9,
DIMENSIONS - MOTOR UNIT -,9 RM WITH SACER COULING L L X LM a DN f Hs DN HM H H H n x Ød L S L L L B B Model Speed Spacer Type DN DN a f L L L L L S x LM HM Hs H h h B B nxød Weight -, 9 Yes H 9 x9, -, 9 Yes H 9 9 9 9 x9, - 9 Yes H 9 9 9 x9, - 9 Yes H 9 9 9 x9, - 9 Yes H 9 9 9 x9, - 9 Yes H 9 9 9 x9, -, 9 Yes H9 9 9 9 x9, -, 9 Yes H9 9 9 9 x9 9, -, 9 Yes H9, 9 9 x, - 9 9 Yes H9, 9 9 9 x, - 9 Yes H9, 9 9 x, - 9 Yes H9, 9 9 x, -, 9 Yes H 9 9 9 9 x9, - 9 Yes H 9 9 9 x9, - 9 Yes H 9 9 9 x9, -, 9 Yes H9 9 9 9 x9,9 -, 9 Yes H9 9 9 9 x9, - 9 Yes H 9 9 9 x9, -, 9 Yes H9 9 9 9 x9,9 -, 9 Yes H9 9 9 9 x9, - 9 9 Yes H9 9 9 9 x, - 9 Yes H9 9 9 x, - 9 Yes H9 9 9 x 9, -, 9 Yes H9, 9 9 x,9-9 9 Yes H9 9, 9 9 9 x, - 9 Yes H9 9, 9 9 x, - 9 Yes H9 9, 9 9 x, -, 9 Yes H9, 9 x,9-9 Yes H 9 9 9 x9,9-9 Yes H 9 9 9 x9 9,9 -, 9 Yes H9 9 9 9 x9, -, 9 Yes H9 9 9 9 x9, - 9 9 Yes H9 9 9 9 x, - 9 Yes H9 9 9 x,9 -, 9 Yes H9 9 9 9 x9 9, - 9 9 Yes H9 9 9 9 x, - 9 Yes H9 9 9 x, - 9 Yes H9 9 9 x, -, 9 Yes H9 9 x 99, - 9 Yes H 9 9 x 9, - 9 Yes H9 9, 9 9 x, -, 9 Yes H9, 9 x,9-9 Yes H, 9 x, - 9 Yes H 9, 9 x9, -, 9 Yes H9, 9 9 x, -, 9 Yes H9, 9 9 x, - 9 9 Yes H9 9, 9 9 9 x,
DIMENSIONS - MOTOR UNIT -,9 RM WITH SACER COULING (CONT.) Model Speed Spacer Type DN DN a f L L L L L S x LM HM Hs H h h B B nxød Weight - 9 Yes H9 9, 9 9 x, - 9 Yes H9 9, 9 9 x, -, 9 Yes H9, 9 x, - 9 Yes H9, 9 9 x, - 9 Yes H9, 9 9 x, -, 9 Yes H9, 9 x, - 9 Yes H, 9 x, - 9 Yes H 9, 9 x9,9 -, 9 Yes H9 9 x, - 9 Yes H 9 9 x, - 9 Yes H 9 9 x9, - 9 Yes H 9 9 x9 9, - 9 Yes H 9 9 x9, -, 9 Yes H9, 9 9 x, - 9 9 Yes H9, 9 9 9 x,9-9 Yes H9, 9 9 x, - 9 Yes H9, 9 9 x 9, -, 9 Yes H9, 9 x, - 9 Yes H 9, 9 x, - 9 Yes H9, 9 9 x, -, 9 Yes H9, 9 x 9, - 9 Yes H 9, 9 x, - 9 Yes H 9 9, 9 x9, - 9 Yes H 9 9, 9 x9, - 9 Yes H 9 9 x9 9,9-9 Yes H 9 9 x9, - 9 Yes H 9 9 x9, - 9 Yes H 9 x9, - 9 Yes H x9, -, 9 Yes H9 9 x 9, - 9 Yes H 9 9 x, - 9 Yes H 9 9 x9, - 9 Yes H 9 9 x9 9, - 9 Yes H 9 9 x9,9 -, 9 Yes H9 9 x, - 9 Yes H 9 9 x, - 9 Yes H 9 9 x9, - 9 Yes H 9 9 x9, - 9 Yes H 9 9 x9, - 9 Yes H 9 x9, - 9 Yes H 9 9 9 x9, - 9 Yes H 9 9 9 x9, - 9 Yes H 9 x9, - 9 Yes H x9, - 9 Yes H 9 x9 9, - 9 Yes H x9,
NOTE
INFORMATION SHEET FOR EQUIMENT LOCATED IN AN ATEX ZONE (/) DIRECTIVE 9/9/CE This box is for use by Salmson only Customer code:... Order N o :.... CONTACT DETAILS : Name (or company) :.... E-mail :... Contact :.... Address :.... Line of business :............................................. Tél. :.... Town :... Fax :... ostcode :.... Replacing a Salmson or Essamico pump : Type of pump :... Serial N o :.... Characteristics of the LIQUID : Type :.... Clear q or abrasive q Size and type of the abrasives :.... Temperature :.... C Viscosity :..... at temp. :.... Characteristics of the ALICATION (if defined) : Speed :.... m/h ressure :.... m available :.... m or description of the application to be approved Suction lift q or suction head q If suction lift: min. distance from liquid to pump centreline (ha) :....................................... m If suction head, minimum head to pump centreline (hc) :....................................... m Total length of suction hose (la) :.... m Diameter of suction hose (da) :.... mm (if pump is well-known, do not fill in the installation characteristics) Comments :............................................. Density :.... Additives :.... at%.... ph :.... Inflammable liquid : yes q no q Comments :............. Strainer/foot valve : yes q no q Filter : yes q no q Number of valves at suction end :.... Number of elbows at suction end :... Speed in pump :.... Maximum static discharge head (hr) :.... m Total length of discharge hose (lr) :.... m Diameter of discharge hose (dr) :.... mm Number of valves at discharge end :.... Number of elbows at discharge end :............. Comments :.................................................................................................................. LEASE RETURN TO :, bd de la République - Espace Lumière - Bât. - Chatou Cedex - FRANCE SALMSON Contact : (n o Indigo) www.salmson.com Fax. : 9 9
INFORMATION SHEET FOR EQUIMENT LOCATED IN AN ATEX ZONE (/) DIRECTIVE 9/9/CE Characteristics of the MOTOR : Operating time :... h/day Voltage available : -ph. V q -ph. V q -ph. V q Other type of motor :.... lease specify :.... Frequency : hz q hz q variable q Frequency range :.... Number of pump starts :.... /h ATEX characteristics in accordance with Directive 999 / 9 : If your equipment is to be installed in an ATEX risk zone (potentially explosive atmosphere), you are required under Directive 999 / 9 to define the level of risk. To enable us to help you with this task, please reply to the following questions by selecting one checkbox per section. This information will be used to define the pump and its protection level. Once the pump has been defined on the basis of this information, it must not be used in other conditions. ompe Salmson cannot not be held responsible if the pump is used in conditions other than those specified. Definition of the risk zone according to Directive 999 / 9 and EN -. Zone q zone is not covered by our products Zone q zone is not covered by our products Zone q zone is not covered by our products Temperature classification selected : T q T q T q C C C T q T q T q C C C Category of gas mixtures for Group-II equipment IIA q IIB q IIC q Comments :... Signature : Signed in :... On... : Name :.... Signature :