Catalog HY15-350/US Contents odies and SERIES DESCRITION ODY NO. GE NO. RKER STNDRD ODIES ND ITIES C04-... 04, Way... 04--*... 7 C04-3... 04, 3 Way... 04-3-*... 8 C08-... 08, Way... 08--*... 9 C08-3... 08, 3 Way... 08-3-*... 10 C08-4... 08, 4 Way... 08-4-*... 11 C09-... 09, Way... 09--*... 1 C10-... 10, Way... 10--*... 13 C10-T... 10, Way, T... 10-T-*... 14 C10-3... 10, 3 Way... 10-3-*... 15 C10-3S... 10, 3 Way, Short... 10-3S-*... 16 C10-4... 10, 4 Way... 10-4-*... 17 C11-3... 11, 3 Way... 408075... 18 C1-... 1, Way... 1--*... 19 C1-3... 1, 3 Way... 1-3-*... 0 C1-3L... 1, 3 Way, Long... 1-3L-*... 1 C1-4... 1, 4 Way... 1-4-*... C1-4L... 1, 4 Way, Long... 1-4L-*... 3 C16-... 16, Way... 16--*... 4 C16-3... 16, 3 Way... 16-3-*... 5 C16-3S... 16, 3 Way, Short... 16-3S-*... 6 C16-4... 16, 4 Way... 16-4-*... 7 C0-... 0, Way... 0--*... 8 C0-3S... 0, 3 Way, Short... 0-3S-*... 9 COUNTERLN ITIES ND ODIES MHC-010... Single and Dual Counterbalance odies... MHC-010-*...30 MHC-0... Single and Dual Counterbalance odies... MHC-0-*...31 MHC-05... Single and Dual Counterbalance odies... MHC-05-*...3 MHC-050... Single and Dual Counterbalance odies... MHC-050-*...33 ILOT ISTON ITIES 10... 10 for Single and ilot iston... 34 16... 16 for Single and ilot iston... 34 10... 10 for Dual and ilot iston... 34 16... 16 for Dual and ilot iston... 34 STNDRD ITY LUGS lugs... 35 CRTK ODIES D03-N... Interrupt, -Way, Only... D03-N-*...36 D03-N... Interrupt, -Way, Only... D03-N-*...37 D03-NR... Interrupt, Reducing Function, Only... D03-NR-*... 38 D03-NS... Interrupt, Sequencing Function, Only... D03-NS-*... 39 D03-T... to T, Only... D03-T-*... 40 D03-N... and Interrupt, Only... D03-N-*...41 D03-X... and Crossover, Only... D03-X-*...4 D03-T... and s to Tank, Only... D03-T-*...43 D03-DDX... s and Drain to Crossover, Only... D03-DDX-*... 44 D03-D... Drain to, Only... D03-D-*...45 D03-D... Drain to, Only... D03-D-*...46
Catalog HY15-350/US Contents odies and SERIES DESCRITION ODY NO. GE NO. SECIL ODIES ND ITIES 0W-...... L1079*... 47 SW-3... 3... L1081*... 48 T11... 3 or 4 Dual... L108*... 49 T1... 4... L1083*... 50 C...... L101*... 51 G...... L103*... 5 R...... L105**... 53 U...... L10**... 54 X...... L1051*... 55 3... 3... L100**... 56 3C... 3 or 4 Dual... L100**... 57 3J... 3... L1009*... 58 3K... 3... 59 3M... 3 or 4 Dual... L100**... 60 3X... 3... L1055*... 61 3Z... 3... L103**... 6 4C... 4... L1056*... 5... 5... L103**... 64 53-1... 3 or 4 Dual... L1031*... 65 54-1... 3... L10591... 66 68-1... 3 or 4 Dual... L10**... 67 91-1... 3... L1015*... 68 100-1... 5... L1031*... 69
Catalog HY15-350/US Tips odies and INTRODUCTION This Tips section is split into three parts; Standard Line odies,, and Cartpaks. In the standard line bodies section, we highlight the features and options of our standard offering of line bodies. In the cavity section we discuss common cavities and form tools. In the Cartpak section, we present the features and options to arker s line of D03 style sandwich bodies. The Tips are provided to help you become more familiar with arker Hannifin s line of product and assist you in applying our product. STNDRD LINE ODIES arker offers standard line bodies for each valve and cavity size. elow are some of the features of arker s standard line bodies. Yellow Zinc Coating Steel bodies are coated with yellow zinc dichromate providing protection from salt spray. Common llows single body to be used for a number of functions. Various s Each body has a variety of port sizes and types available. Slotted Mounting Holes llows several bodies to be stacked together and held by one set of bolts. COMMON OTIONS & FETURES luminum vs. Steel: arker offers standard line bodies in both aluminum and steel. luminum bodies are most often used for general applications. They are lightweight and less costly than steel bodies. arker s aluminum bodies are coated with a clear anodize to provide a corrosion resistant protection. luminum bodies should never be used in applications above 10 bar (3000 psi.) Steel bodies are more durable and luminum and Steel odies Light weight aluminum bodies are available for low pressure applications. Durable steel bodies are available for higher pressures. Clear nodized luminum bodies are thin coated with a clear anodize providing corrosion resistance. heavier than aluminum bodies. They are ideal for applications with elevated pressures or where rugged construction is desired. Steel bodies are suitable for applications up to 350 bar (5000 psi.) arker s steel bodies are coated with yellow zinc dichromate providing corrosion resistance. Yellow zinc dichromate even provides the steel body many hours of protection from salt spray. 1
Catalog HY15-350/US Tips odies and COMMON OTIONS & FETURES (Cont.) Drop: The pressure drop through a line body is fairly minimal. Each catalog page shows a pressure drop curve. This should be added to the pressure drop through the cartridge when trying to estimate total pressure drop for a function. ing: arker offers a variety of port sizes and types for each line body. While NT or pipe ports were once very popular and are still offered, we recommend SE ports for new applications. SE ports and fittings provide a more secure connection than pipe ports. S ports are also available. being port 1, the middle port labeled (3), and the top port labeled (). Over the years, this has caused some confusion, so we have relabeled the ports sequentially from the bottom. For identification, the current design will be marked with a arker symbol like the one shown. 3 3 Numbering Change: With this catalog, we have re-numbered the ports on our 3-way line bodies. In the past, three way bodies were numbered with the nose 1 revious Design 1 Current Design ITIES The hole that the cartridge valve is screwed into is called a cavity. Many cartridge producers manufacture valves that fit a common cavity. With a common cavity, a valve theoretically could be removed from a cavity and replaced by another manufacturer s product. One should be careful though to check cross drill ports and thread depths when pursuing this activity. While it is true that many manufacturer s products fit inside another s cavity, the cross drills sometimes expose an o-ring to pressure, causing the o-ring to be extruded. Valve / Compatibility Chart: Through acquisition, arker Hannifin has accumulated a number of manufacturers with common cavities. To accommodate all of our product lines, we have released a new cavity for our Winner s Circle product line. The cavities shown in this catalog are considered Winner s Circle. The Winner s Circle valves are downward and upward compatible with the arker Series of product. On each catalog page, you will find a chart like the one shown on this page. The purpose of this chart is to help identify if a valve from one acquisition can be replaced by the Winner s Circle valve, or another acquisition. The valves are designated by the columns of the chart and the cavities by the rows. If you have an existing cavity, you find it on the chart and follow across to see which valves you may put in the cavity. For instance, using the chart below, let s say you have an existing manifold in which you had manufactured a FS cavity (maybe you were using a -10). y finding the row labeled FS and following across, you find that you could use the new Winner s Circle product, an FS product, or a C product of the same size in this cavity. arker or Waterman valve will not fit in this cavity without modifying the cavity. This chart is provided to help you in converting to the Winner s Circle product line. ITY VLVE Winner s Circle arker Waterman FS C Winner s Circle X X X X X arker X X X Waterman X X X FS X X X C X X X Tools: On each catalog page, cavity tools are listed for your use in creating special manifolds. More is discussed on manifold construction in the section of this catalog. For 3-way and 4-way valves, you will find a roughing and a finishing tool. The rougher is a step drill used to prep the cavity for the finishing tool. The rougher removes the mass of material and is necessary because the finisher is not designed for primary forming. The finisher is a precision tool used to provide the final dimensions of the cavity. No rougher is offered for -way cavities because a standard drill bit can be used to remove the mass of material.
Catalog HY15-350/US Tips odies and CRTK ODIES arker Cartpak sandwich mounted bodies are designed to be mounted under a standard ISO 4401-03, NF D03, TO 3 size valve, and provide a multitude of different functions. The bodies are designed to accept a common 10 size cartridge valve allowing the designer the flexibility to use a single body to provide pressure, directional, flow, or load control. One or more Cartpak bodies may be sandwiched underneath a arker D1 Series directional valve to provide the control functions for all portions of a hydraulic circuit. The ISO standard fatigue rated bodies are available in either aluminum or ductile iron. 11 Options This provides a wide range of control options. Standard D03 Mount llows body to be mounted directly under D03 valve reducing tube and pipe connections, resulting in fewer leak points. Coated odies luminum bodies are coated with clear anodize for corrosion resistance. Steel bodies are coated with yellow zinc dichromate providing protection from salt spray and other corrosive elements. NF Fatigued Rated oth aluminum and steel bodies are NF fatigue rated improving reliability. luminum and Steel odies Light weight aluminum bodies are available for low pressure applications. Durable steel bodies are available for higher pressures. Catalog ages: Each Cartpak catalog page is laid out in a similar format and is designed to help you select the proper body for your application. In the top left corner of the page there is a brief description and body schematic. The body schematic shows the cartridge cavity and the ports connecting to it. This schematic can be used to understand which valves can be used in the body. For instance, in the URIGHT VLVE SIDE T T SULTE SIDE Common 10 Common cavities allow for a wide range of functions to be accomplished in a single body. example shown here, flow from the subplate in port is directed into the nose of the cartridge. The side port Gauge of the cartridge is connected to the valve side of port. Thus, you want to choose cartridges providing the function desired, and use the nose as the inlet. For instance, a 101 meters flow from its nose port to its side port and would be ideal for the p-port interrupt body shown. 3
Catalog HY15-350/US Tips odies and In addition to the body schematic, we also provide a hydraulic schematic at the bottom of each catalog page. This schematic shows a variety of arker cartridge part numbers that can be used with this body. This list is not intended to be comprehensive, but it is intended to show the wide variety of options that can be achieved with each body. You will also note, the product listing shows the orientation of the block (upright or inverted), the cavity for the cartridge, and cavity plugs (when necessary.) Once again, many options can be achieved with each body. O-Ring lates: Since many of the Cartpak bodies can be flipped to achieve extra functions, the faces of the bodies must be flat. Thus, an o-ring plate with o-rings must be used to seal the mounting surface. One plate with o-rings will be provided with any body that can be inverted. elow are the kit numbers; Nitrile Kit - 717939 Fluorocarbon Kit - 717939V Flipping Cartpaks: s mentioned before, many Cartpak bodies can be flipped to create extra options. The catalog pages show some of the functions that can be achieved by flipping. The words upright and inverted are written on the bodies to help you identify which side you are looking at. To invert the body, while facing the long face of the body (in other words, the sides without any ports or cavities), rotate the valve 180 degrees away from your body in an upward fashion. y doing this, you have essentially switched the port and T port. Stacking Cartpaks: Cartpak bodies can be stacked on top of one another to provide a number of functions in a single assembly. When stacking Cartpak bodies though, you want to take some care in the order in which the bodies are stacked. In general, flow controls should be stacked as close to the subplate stack as possible, while pilot operated check valves or counterbalance valves should be stacked as close to the D03 valve as possible. The D03 line of bodies has a common height of 40mm (1.58 in.). elow is a list of bolt kits available from arker. UNC olt Kits for use with D1V Control & Manapaks/Cartpaks (D1V*-75 Design, Operated) Number of Manapaks/Cartpaks @ 1.58" (40mm) thickness 0 1 3 4 D1V-75 K09 K43 K5 K44 K45 1.5".88" 4.38" 6.00" 7.50" D1V-75 lus K176 K56 K1 K107 K106 Tapping late.5" 3.81" 5.38" 7.00" 8.50" Note: ll bolts are SE grade 8, 10-4 UNC- thread, torque to 5.6 N.m. (50 in.-lbs.) Gauge s: Several of the Cartpak bodies are equipped with a SE #4 gauge port to assist the user during installation and troubleshooting. We offer hex adapter plugs, should your pressure gauge have a different thread type. Hex dapter lug to convert from SE #4 1830016 S 1830017 ST 1830018 NTF 1830019 Metric (M1) D03 ad Dimensions: elow is the common dimensions of the standard D03 mount pad. Since these dimensions are common to all Cartpak bodies, we do not identify them on the individual valve pages. 10.3 (0.41) 19.0 (0.75) 7.8 (1.09) T 40.5 (1.59).0 (0.87) [19.1 (0.75) Width cross Flats] T when is Inverted Hex dapter lug for Converting from #4-SE to NTF, M1, ST or S Gage s, Where pplicable 0.3 (0.80) 16.3 (0.64) 6.7 (1.05) 3.5 (1.8) when is Inverted 4
Catalog HY15-350/US Tips odies and RESSURE DRO CHRT The following charts outline the pressure drop through the arker Cartpak bodies. The pressure drop is minus the cartridge valve. SI 100 ar 83 1000 69 8 Drop ( ) 800 600 55 41 1 400 8 00 14 0 LM 0 GM 19 5 38 10 (Q) 57 15 6 7 4 5 3 76 0 Orientation T D03-N Upright 1 3 3 Inverted 1 3 3 D03-T Upright 3 3 3 3 Inverted 3 3 3 3 D03-N Upright 3 3 4 4 Inverted 3 3 4 4 D03-T Upright 3 3 3 3 Inverted 3 3 3 3 D03-X Upright 5 5 3 3 D03-NR Upright 6 3 3 3 D03-NS Upright 7 3 3 3 D03-DDX Upright 3 3 1 1 D03-D Upright 6 3 3 3 D03-D Upright 6 3 3 3 D03-N Upright 8 3 3 3 Inverted 3 8 3 3 5
Catalog HY15-350/US Notes Tips odies and 6
Catalog HY15-350/US Information Valve/ Compatibility For additional information see Tips on pages 1-6. ITY erformance Curve Drop vs. SI ar 30.1 VLVE Winner s Circle arker Waterman FS C Winner s Circle X X X arker X X X Waterman X X X FS C Hydraulic Oil 150 SSU @ 100 F (3 cst) Standard odies and 04, -Way Ø 1.03 (.88) Ø 1.50 (.49) Ø 1.37 (.487)* 10.87 (.48) 10.6 (.418).74 (.108).36 (.093).79 (.031) Ø 10.06 (.396) Ø 9.91 (.390)*.13 (.005).5 (.010) R. 13.08 (.515) 1.83 (.505) 7/16 0UNF-.05 (.00) -- -- 11.53 (.454) *.05 (.00).05 (.00) Ø 3.56 (.14) 30 0 1.57 (.06).10 (.870) Min. Ø 8.76 (.345) Ø 8.76 (.345) Ø 8.71 (.343)*.03 (.001) Drop ( ) 0 10 1.4 0.7 0 LM GM 0 1.9.5 3.8 1.0 5.6 1.5 (Q) 7.5.0 C04-0.5 (.0) 7.1 (.8) 38.1 (1.50) 31.8 (1.5) 1.6 (.89) 10.7 (.4) 8.6 (1.13) 38.1 (1.50) 3.6 (.14) R. 3.3 (.13) 9.5 (.38) 19.1 (.75) 04 04 -Way Code Omit Steel luminum Code 4T SE - 4 Form Tool: Weight: Rougher None Finisher NFT04-F.07 kg (.15 lbs.) 7
Catalog HY15-350/US Information Standard odies and 04, 3-Way Valve/ Compatibility For additional information see Tips on pages 1-6. ITY Winner s Circle X X X arker X X X Waterman X X X FS C erformance Curve Drop vs. SI ar 30.1 VLVE Winner s Circle arker Waterman FS C Hydraulic Oil 150 SSU @ 100 F (3 cst) Ø 1.03 (.88) Ø 1.50 (.49) Ø 1.37 (.487)* 10.87 (.48) 10.6 (.418).74 (.108).36 (.093).79 (.031) Ø 10.06 (.396) Ø 9.91 (.390)*.13 (.005).5 (.010) R. 13.08 (.515) 1.83 (.505) 7/16 0UNF-.05 (.00) -- -- 4.97 (.983) 4.71 (.973) Ø 3.56 (.14) Typ. 0 Typ. 11.53 (.454) 1.57 (.06).81 (.898).56 (.888) 3.77 (1.90) Min. * Ø 7.98 (.314) Ø 7.9 (.31)*.03 (.001) 30 Typ..05 (.00).05 (.00) Ø 7.98 (.315) Ø 8.76 (.345) Ø 8.71 (.343)*.03 (.001) Drop ( ) 0 1.4 10 0.7 0 LM GM 0 1.9.5 3.8 1.0 5.6 1.5 (Q) 7.5.0 C04-3 0.5 (.0).7 (.89) 44.5 (1.75). (.88) 3 10.7 (.4) 41.3 (1.) 50.8 (.00) 9.5 (.38) 19.1 (.75) 7.1 (.8) 38.1 (1.50) 1 3.6 (.14) R. 3. (.13) 04 3 04 3-Way Code 4T SE-4 4T aluminum only. Form Tool: Weight: Rougher NFT04-3R Finisher NFT04-3F.10 kg (.3 lbs.) 8
Catalog HY15-350/US Information Valve/ Compatibility For additional information see Tips on pages 1-6. ITY erformance Curve Drop vs. SI ar 100 6.9 VLVE Winner s Circle arker Waterman FS C Winner s Circle X X X X X arker X X X X X Waterman X X X X X FS X X X X X C X X X X X Hydraulic Oil 150 SSU @ 100 F (3 cst) Standard odies and 08, -Way 3/4 16UNF- (.00) Ø 30.18 (1.188) Ø 0.71 (.816) Ø 0.59 (.811).9 (.115).54 (.100).79 (.031) Ø 17.55 (.691) Ø 17.37 (.684).5 (.010) R. (.00) -- -- 14.40 (.567) 14.15 (.557) 14.7 (.56) 14.0 (.55) 30 19.18 (.755) 18.9 (.745) 8.58 (1.15) Min. Ø 7.9 (.31) 1.59 (.0) R. Ø 11.11 (.438) Ø 1.75 (.50) Ø 1.70 (.500) Drop ( ) 80 60 40 0 5.5 4.1.8 1.4 0 LM GM 0 7.5 15 4.5 6 30 8 (Q) 37.5 10 C08-0.4 (.0) 7.1 (.8) 44.5 (1.75) 7.4 (1.08) 1 1.7 (.50) 31.8 (1.5) 44.5 (1.75) 3.6 (.14) R 1.7 (.50) 5.4 (1.00) 38.1 (1.50) 3. (.13) 08 08 -Way Code Omit Steel luminum Code 4 1/4 NTF 6 3/8 NTF 4T SE - 4 6T SE - 6 6 3/8 SG Form Tool: Weight: Rougher None Finisher NFT08-F.11 kg (.5 lbs.) 9
Catalog HY15-350/US Information Standard odies and 08, 3-Way Valve/ Compatibility For additional information see Tips on pages 1-6. ITY Winner s Circle X X X arker X X X Waterman X X X FS X X C X X erformance Curve Drop vs. SI ar 100 6.9 VLVE Winner s Circle arker Waterman FS C Hydraulic Oil 150 SSU @ 100 F (3 cst) 3/4 16UNF- (.00) Ø 30.18 (1.188) Ø 0.71 (.816) Ø 0.59 (.811) (.00) -- -- 14.10 (.555) 13.84 (.545).9 (.115).54 (.100).79 (.031) Ø 17.55 (.691) Ø 17.37 (.684).5 (.010) R. 14.40 (.567) 14.15 (.557) 17.40 (.685) 17.15 (.675) Ø 7.94 (.31) 1.59 (.0) R. 8.4 (1.119) 8.17 (1.109) 31.6 (1.45) 31.37 (1.35) 43.66 (1.719) Min. 31 Ø 15.93 (.67) Ø 15.87 (.65) Ø 11.11 (.438) Ø 14.33 (.564) Ø 14.7 (.56) (.00) Ø 5.54 (.18) Drop ( ) 80 5.5 60 4.1 40.8 0 1.4 0 LM GM 0 7.5 15 4.5 6 30 8 (Q) 37.5 10 C08-3 11.1 (.44) 38.1 (1.50) 7.1 (.8) 57. (.5) 8.6 (1.13) 3 13.9 (.55) 0.8 (.03) 8.3 (1.11).5 (.50) 1.7 (.50) 5.4 (1.00) 1 3.6 (.14) R 47.6 (1.88) 4.8 (.19) 08 3 08 3-Way Code Omit Steel luminum Code 4 1/4 NTF 4T SE - 4 6T SE - 6 6 3/8 SG Form Tool: Weight: Rougher NFT08-3R Finisher NFT08-3F.7 kg (.60 lbs.) 10
Catalog HY15-350/US Information Valve/ Compatibility For additional information see Tips on pages 1-6. ITY erformance Curve Drop vs. Drop ( ) SI ar 100 6.9 80 60 40 0 5.5 4.1.8 1.4 08 08 4-Way Code Omit Steel luminum Winner s Circle X X X arker X X X Waterman X X X FS C 4 VLVE Winner s Circle arker Waterman FS C X Hydraulic Oil 150 SSU @ 100 F (3 cst) 0 LM GM 0 3.8 1 7.5 11.3 3 15 4 (Q) Code 4T SE - 4 6T SE - 6 6 3/8 SG 18.8 5 Standard odies and 08, 4-Way 3/4 16UNF- (.00) Ø 30.18 (1.188) Ø 0.71 (.817) Ø 0.59 (.811) C08-4 11.1 (.44) 50.8 (.00) 7.1 (.8) Ø 17.55 (.691) Ø 17.37 (.684) 3 14.10 (.555) 13.84 (.545).9 (.115).54 (.100).79 (.031) 57. (.5) 47.6 (1.88) Form Tool: Weight:.5 (.010) R. 14.40 (.567) 14.15 (.557) 17.40 (.685) 17.15 (.675) 8.6 (1.13) 1 4 4.47 (1.67) 8.4 (1.119) 8.17 (1.109) 13.9 (.55) 0.8 (.03) 4.8 (.19) 1.59 (.0) R. Rougher NFT08-4R Finisher NFT08-4F.45 kg (1.0 lbs.) 4.5 (1.67) 3.6 (.14) R. Ø 5.54 (.18) 31.6 (1.45) 31.37 (1.35) 45.77 (1.80) 45.5 (1.79) 53.98 (.15) Min. 76. (3.00) Ø 5.54 (.18) Ø 15.93 (.67) Ø 15.87 (.65) 1.7 (.50) -- Ø (.00) -- Ø 5.54 (.18) Ø 11.11 (.438) 31 Ø 1.75 (.50) Ø 1.70 (.500) (.00) Ø 14.33 (.564) Ø 14.7 (.56) (.00) 5.4 (1.00) 11
Catalog HY15-350/US Information Standard odies and 09, -Way Valve/ Compatibility For additional information see Tips on pages 1-6. ITY Winner s Circle arker X X Waterman X X FS C erformance Curve Drop vs. SI ar 100 6.9 VLVE Winner s Circle arker Waterman FS C Hydraulic Oil 150 SSU @ 100 F (3 cst) Ø 30.18 (1.188) Ø 0.71 (.816) Ø 0.59 (.811)* 14.7 (.56) 14.0 (.55).9 (.115).54 (.100).79 (.031) Ø 17.53 (.690) Ø 17.37 (.684)* 3/4 16UNF-.05 (.00) -- --.13 (.005).5 (.010) R. 14.8 (.56) 19.18 (.755) 18.9 (.745) 30 0 8.58 (1.15) Min. * Ø 7.9 (.31) 1.57 (.06).05 (.00).05 (.00) Ø 15.93 (.67) Ø 15.93 (.67) Ø 15.87 (.65)*.03 (.001) Drop ( ) 80 5.5 60 4.1 40.8 0 1.4 0 LM GM 0 7.5 15 4.5 6 30 8 (Q) 37.5 10 C09-0.4 (.0) 7.1 (.8) 44.5 (1.75) 7.4 (1.08) 1 1.7 (.50) 31.8 (1.5) 44.5 (1.75) 3.6 (.14) R. 1.7 (.50) 5.4 (1.00) 38.1 (1.50) 3. (.13) 09 09 -Way Code Omit Steel luminum Code 6T SE - 6 6 3/8 SG Steel body only. Form Tool: Weight: Rougher None Finisher FT09-11 kg (.5 lbs.) 1
Catalog HY15-350/US Information Valve/ Compatibility For additional information see Tips on pages 1-6. ITY Winner s Circle X X X X X arker X X X Waterman X X X FS X X X C X X X erformance Curve Drop vs. SI ar 100 6.9 VLVE Winner s Circle arker Waterman FS C Hydraulic Oil 150 SSU @ 100 F (3 cst) Standard odies and 10, -Way 7/8 14UNF- (.00) Ø 30.16 (1.188) Ø 4.05 (.947) Ø 3.93 (.94) (.001) -- --.9 (.115).54 (.100).79 (.031) Ø 0.68 (.814) Ø 0.57 (.810).5 (.010) R. 16.00 (.0) 15.75 (.60) 18.08 (.71) 17.83 (.70) 30 3.93 (.94) 3.67 (.93) 33.3 (1.31) Min. Ø 11.30 (.445) 1.59 (.06) R. Ø 15.47 (.609) Ø 15.93 (.67) Ø 15.88 (.65) Drop ( ) 80 60 40 0 5.5 4.1.8 1.4 0 LM GM 0 19 5 38 10 57 15 76 0 95 5 (Q) 114 30 C10-0.8 (.03) 50.8 (.00) 31.8 (1.5) 18.3 (.7) 38.1 (1.50) 50.8 (.00) 15.9 (.6) 31.8 (1.5) 7.1 (.8) 1 41.3 (1.) 3.6 (.14) R. 6.4 (.5) 10 10 -Way Code Omit Steel luminum Code 4 1/4 NTF 6 3/8 NTF 8 1/ NTF 6T SE - 6 8T SE - 8 6 3/8 SG Steel body only. Form Tool: Weight: Rougher None Finisher NFT10-F.45 kg (1.0 lbs.) 13
Catalog HY15-350/US Information Standard odies and 10, -Way, T Valve/ Compatibility For additional information see Tips on pages 1-6. ITY Winner s Circle X X X X X arker X X X Waterman X X X FS X X X C X X X erformance Curve Drop vs. SI ar 100 6.9 VLVE Winner s Circle arker Waterman FS C Hydraulic Oil 150 SSU @ 100 F (3 cst) 7/8 14UNF- (.00) Ø 30.16 (1.188) Ø 4.05 (.947) Ø 3.93 (.94) (.001) -- --.9 (.115).54 (.100).79 (.031) Ø 0.68 (.814) Ø 0.57 (.810).5 (.010) R. 16.00 (.0) 15.75 (.60) 18.08 (.71) 17.83 (.70) 30 3.93 (.94) 3.67 (.93) 33.3 (1.31) Min. Ø 11.30 (.445) 1.59 (.06) R. Ø 15.47 (.609) Ø 15.93 (.67) Ø 15.88 (.65) Drop ( ) 80 5.5 60 4.1 40.8 0 1.4 0 LM GM 0 19 5 38 10 57 15 76 0 95 5 (Q) 114 30 1.7 (.50) 3.6 (.14) R. C10-.5 (.50) 50.8 (.00) 7.1 (.8) 6.4 (.5) 0.8 (.03) 43.7 (1.7) 66.7 (.) 43.7 (1.7) 50.8 (.00) 31.7 (1.5) 18.3 (.7) 1 1 Gauge 1/4" NT 31.8 (1.5) 10 T 10 -Way Code Omit Steel Code T6T SE - 6 T8T SE - 8 Form Tool: Weight: Rougher None Finisher NFT10-F 1.4 kg (3.0 lbs.) 14
Catalog HY15-350/US Information Valve/ Compatibility For additional information see Tips on pages 1-6. ITY erformance Curve Drop vs. SI ar 80 5.5 VLVE Winner s Circle arker Waterman FS C Winner s Circle X X X X X arker X X X X X Waterman X X X X X FS X X X X X C X X X X X Hydraulic Oil 150 SSU @ 100 F (3 cst) Standard odies and 10, 3-Way 7/8 14UNF- (.00) Ø 30.16 (1.187) Ø 4.05 (.947) Ø 3.93 (.94).9 (.115).54 (.100).79 (.031) Ø 0.68 (.814) Ø 0.57 (.810) (.001) -- --.5 (.010) R. 16.00 (.0) 15.75 (.60) 1.7 (.855) 1.46 (.845) 18.4 (.75) 18.16 (.715) 38.3 (1.505) 37.97 (1.495) Ø 6.35 (.50) 1.59 (.06) R. 34.6 (1.349) 34.01 (1.339) 47. (1.875) Min. 30 Ø 6.35 (.50) Ø 17.53 (.690) Ø 17.48 (.688) Ø 15.47 (.609) Ø 15.93 (.67) Ø 15.88 (.65) (.00) Drop ( ) 60 40 0 4.1.8 1.4 0 LM GM 0 19 5 38 10 57 15 76 0 (Q) 0.8 (.03) 34.4 (1.35) C10-3.5 (.50) 31.8 (1.5) 3 18.3 (.7) 54.0 (.13) 66.8 (.) 16.0 (.) 31.8 (1.5) 7.1 (.8) 50.8 (.00) 1 3.6 (.14) R. 6.4 (.5) 10 3 10 3-Way Code Omit Steel luminum Code 4 1/4 NTF 6 3/8 NTF 8 1/ NTF 6T SE - 6 8T SE - 8 6 3/8 SG 8 1/ SG Steel body only. Form Tool: Weight: Rougher NFT10-3R Finisher NFT10-3F.77 kg (1.7 lbs.) 15
Catalog HY15-350/US Information Standard odies and 10, 3-Way, Short Valve/ Compatibility For additional information see Tips on pages 1-6. ITY Winner s Circle X X X arker Waterman FS X X X C X X X erformance Curve Drop vs. SI ar 80 5.5 VLVE Winner s Circle arker Waterman FS C Hydraulic Oil 150 SSU @ 100 F (3 cst) 7/8 14UNF- (.00) Ø 30.16 (1.188) Ø 4.05 (.947) Ø 3.93 (.94) 14.40 (.567) 14.15 (.557).9 (.115).54 (.100).79 (.031) Ø 0.68 (.814) Ø 0.57 (.810) (.001) -- --.5 (.010) R. 14.40 (.567) 14.15 (.557) 16.64 (.655) 16.38 (.645) 38.61 (1.50) 38.35 (1.510) Ø 3.96 (.156) 1.59 (.06) R. 31.09 (1.4) 30.84 (1.14) 48.01 (1.890) Min. 30 Ø 1.70 (.500) Ø 19.10 (.75) Ø 19.05 (.750) Ø 17.07 (.67) Ø 17.53 (.690) Ø 17.48 (.688) (.00) Drop ( ) 60 4.1 40.8 0 1.4 0 LM GM 0 19 5 38 10 57 15 76 0 (Q) 0.8 (.03) 31.0 (1.) C10-3S.5 (.50) 31.7 (1.5) 14.3 (.56) 54.0 (.13) 66.7 (.) 15.9 (.) 31.8 (1.5) 7.1 (.8) 3.6 R. (.14) 50.8 (.00) 6.4 (.5) SE-4 G1/4-19 S 10 3S 10 3-Way Short Code Omit Steel luminum Code 6T SE - 6 8T SE - 8 6 3/8 SG 8 1/ SG Form Tool: Weight: Rougher NFT10S-3R Finisher NFT10S-3F.77 kg (1.7 lbs.) 16
Catalog HY15-350/US Information Valve/ Compatibility For additional information see Tips on pages 1-6. erformance Curve Drop vs. Drop ( ) ITY SI ar 100 6.9 80 60 40 0 5.5 4.1.8 1.4 NOTE: When machining for use with DF10, s 1 and 4 must be connected in the manifold/block. 10 10 4-Way Code Omit Steel luminum Winner s Circle X X X X X arker X X X X X Waterman X X X X X FS X X X X X C X X X X X 4 VLVE Winner s Circle arker Waterman FS C Hydraulic Oil 150 SSU @ 100 F (3 cst) 0 LM GM 0 7.5 15 4.5 6 30 8 (Q) Code 6 3/8 NTF 6T SE - 6 8T SE - 8 6 3/8 SG Steel body only. 37.5 10 Standard odies and 10, 4-Way.9 (.115).54 (.100) 7/8 14UNF-.79 (.030) (.00) Ø 30.16 (1.188) Ø 4.05 (.947) Ø 3.93 (.94) 0.8 (.03) 7.1 (.8) 34.4 (1.35) 3 31.8 (1.5) 38.3 (1.505) 37.97 (1.495) Ø 0.68 (.814) Ø 0.57 (.810).5 (.010) R. 16.00 (.0) 15.75 (.60).35 (.880).10 (.870) 54.10 (.130) 53.85 (.10).5 (.50) 50.8 (.00) Form Tool: Weight: 18.4 (.75) 18.16 (.715) Ø 6.35 (.50) 1 50.11 (1.973) 49.86 (1.9) 4 34.6 (1.349) 34.01 (1.339) Rougher NFT10-4R Finisher NFT10-4F.90 kg (.0 lbs.) C10-4 18.3 (.7) 50.0 (1.97) 3.6 (.14) R. 6.4 (.5) Ø 6.35 (.50).50 (.500) Min. 73.0 (.88) 8.6 (3.5) 1.59 (.06) R. Ø 17.53 (.690) Ø 17.48 (.688) 31 15.9 (.) (.00) Ø 6.35 (.50) Ø 15.47 (.609) Ø 15.93 (.67) Ø 15.87 (.65) (.00) Ø 19.10 (.75) Ø 19.05 (.750) -- (.001) -- 31.7 (1.5) 17
Catalog HY15-350/US Information Standard odies and 11, 3-Way, (ER111C) Valve/ Compatibility For additional information see Tips on pages 1-6. ITY Winner s Circle arker X X X Waterman X X X FS X X X C erformance Curve Drop vs. Drop ( ) SI ar 80 5.5 60 40 0 4.1.8 1.4 VLVE Winner s Circle arker Waterman FS C Hydraulic Oil 150 SSU @ 100 F (3 cst) 0 LM GM 0 19 5 38 10 57 15 76 0 (Q) 7/8 14UNF- --.03 (.001) -- Ø 34.14 (1.344) 0.8 (.03) 50.0 (1.97) 3.6 R. (.14) 18.3 (.7) C10-3L 3 1 1.84 (.860) 18.4 (.718).9 (.115).54 (.100).79 (.031) Ø 0.68 (.814) Ø 0.57 (.810)*.17 (.005).54 (.010) R. Ø 4.05 (.947) Ø 3.93 (.94)*.5 (.50) 31.8 (1.5) 50.01 (1.969) 37.7 (1.485) 15.88 (.65) 34.14 (1.344) Ø 6.35 (.50) Typ. 0 Typ. 66.68 (.65) 34.3 (1.35) 71.3 (.81) 8.6 (3.5) 15.9 (.).05 (.00) *.03 (.001) Ø 17.53 (.690) Ø 17.48 (.688)*.03 (.001) Ø 19.10 (.75) Ø 19.05 (.750)*.03 (.001) 31.8 (1.5) art Number = 408075 50.8 (.00) 7.9 (.31) 18
Catalog HY15-350/US Information Valve/ Compatibility For additional information see Tips on pages 1-6. ITY Winner s Circle X X X arker X X X Waterman X X X FS C erformance Curve Drop vs. SI ar 100 6.9 VLVE Winner s Circle arker Waterman FS C X Hydraulic Oil 150 SSU @ 100 F (3 cst) Standard odies and 1, -Way Ø 41.7 (1.65) Ø 9.9 (1.153) Ø 9.16 (1.148)* 1.84 (.860) 1.59 (.850) 3.68 (.145) 3.30 (.130).79 (.031) Ø 4.84 (.978) Ø 4.69 (.97)*.13 (.005).5 (.010) R. 30.15 (1.187) 9.90 (1.177) 1-1/16 1UN-.05 (.00) -- -- 19.05 (.750) 4.11 (1.658) Min. * Ø 15.88 (.65) 30 0.05 (.00).05 (.00) 1.57 (.06) Ø.8 (.877) Ø.8 (.877) Ø.3 (.875)*.03 (.001) Drop ( ) 80 60 40 0 5.5 4.1.8 1.4 0 LM GM 0 19 5 38 10 57 15 76 0 95 5 (Q) 114 30 C1-8.7 (.34) 76. (3.00) 45.3 (1.78) 1. (.88) 57.1 (.5) 76. (3.00) 3.6 (.17) R. 19.1 (.75) 38.1 (1.50) 65.1 (.56) 5.5 (.) 1 1 -Way Code Omit Steel luminum Code 1 3/4 NTF 8T SE - 8 1T SE - 1 Form Tool: Weight: Rougher None Finisher NFT1-F.45 kg (1.0 lbs.) 19
Catalog HY15-350/US Information Standard odies and 1, 3-Way Valve/ Compatibility For additional information see Tips on pages 1-6. ITY Winner s Circle X X X arker X X X Waterman X X X FS C erformance Curve Drop vs. SI ar 100 6.9 VLVE Winner s Circle arker Waterman FS C X Hydraulic Oil 150 SSU @ 100 F (3 cst) Ø 41.7 (1.65) 0.6 (.81) 3.68 (.145) 3.30 (.130).79 (.031) Ø 4.84 (.978) Ø 4.69 (.97)*.13 (.005).5 (.010) R. Ø 9.9 (1.153) Ø 9.16 (1.148)* 1-1/16 1UN-.05 (.00) -- -- 48.46 (1.908) Ø 11.10 (.437) Typ. 0 Typ. Typ. 19.05 (.750) 6.97 1.57 (1.06) (.06) 4.06 (1.656) 59.08 (.36) Min. Ø.8 (.877) Ø.3 (.875)*.03 (.001) Typ. * 30.05 (.00).05 (.00) Ø.8 (.877) Ø 3.85 (.939) Ø 3.80 (.937)*.03 (.001) Drop ( ) 80 5.5 60 4.1 40.8 0 1.4 0 LM GM 0 19 5 38 10 57 15 76 0 95 5 (Q) 114 30 0.8 (.03) 4.1 (1.66) C1-3 88.9 (3.50) 45.0 (1.77) 3 0.6 (.81) 73.0 (.88) Typ. 88.9 (3.50) 19.1 (.75) 38.1 (1.50) 8.7 (.34) 77.8 (3.06) 1 4.3 (.17) R. 5.5 (.) 1 1 3-Way Code Omit Steel luminum 3 Code 8T SE - 8 1T SE - 1 8 1/ SG Steel body only. Form Tool: Weight: Rougher NFT1-3R Finisher NFT1-3F.0 kg (4.5 lbs.) 0
Catalog HY15-350/US Information Valve/ Compatibility For additional information see Tips on pages 1-6. erformance Curve Drop vs. Standard odies and 1, 3-Way, Long -- 1-1/16 1UN-.05 (.00) --.79 ± 0.13 (.031 ± 0.005).5 /.13 R (.010 /.005) Ø 4.69 (0.97) 3 Ø 3.30 (0.130) 38.10 ± 0.13 (1.500 ± 0.005) +0.15 +0.006 0* +0.38 +0.015 0 0.57 (0.810) Ø 9.1 ± 0.05 (1.150 ± 0.00 )* 53.09 (.090) 8.45 (1.10) 35.56 (1.400) 60.0 (.370) 73.41 (.890) Ø 1.70 (0.500) Typical 9 * Ø 19.84 (.781) For Orifice Disc.05 (.00).05 (.00) Ø.0 ± 0.03 (0.867 ± 0.001).03 (.001) * 1.58 R (0.06) Typical Ø 3.83 ± 0.03 (0.938 ± 0.001).03 (.001) * 8.7 (.34) Typ. 53.1 (.09) C1-3L 101.6 (4.00) 9.1 (3.) 50.8 (.00) 1 3 0.8 (.03) 8.4 (1.1) 4.3 (.17) R. 4.8 (0.19) 5.4 (1.00) 8.6 (3.5) 101.6 (4.00) 50.8 (.00) 1 1 3-Way Long Code Omit Steel luminum 3L Code 1T SE - 1 Form Tool: Weight: Rougher NFT1L-3R Finisher NFT1L-3F 1
Catalog HY15-350/US Information Standard odies and 1, 4-Way Valve/ Compatibility For additional information see Tips on pages 1-6. ITY Winner s Circle X X X arker X X X Waterman X X X FS C erformance Curve Drop vs. Drop ( ) SI ar 100 6.9 80 60 40 0 5.5 4.1.8 1.4 VLVE Winner s Circle arker Waterman FS C X Hydraulic Oil 150 SSU @ 100 F (3 cst) 0 LM GM 0 19 5 38 10 57 15 76 0 95 5 (Q) 114 30 Ø 41.7 (1.65) 0.8 (.03) 8.7 (.34) Typ. 4.1 (1.66) Ø 4.84 (.978) Ø 4.69 (.97)*.13 (.005).5 (.010) R. C1-4 3 0.6 (.81) 1-1/16 3.68 (.145) 1UN- 3.30 (.130).05 (.00).79 (.031) -- -- Ø 9.9 (1.153) Ø 9.16 (1.148)* 88.9 (3.50) 77.8 (3.06) 44.5 (1.75) 1.71 (.508) 48.46 (1.908) 4 Ø 11.10 (.437) Typ. 0 Typ. Typ. 19.05 (.750) 6.97 1.57 (1.06) (.06) 4.06 (1.656) 70.06 (.758) 80.68 (3.176) Min. 0.6 (.81).7 (.51) 9.1 (3.) Typ. 108.0 (4.5) 4.3 (.17) R. 5.5 (.) Typ. Ø.8 (.877) Ø.3 (.875)*.03 (.001) 30 19.1 (.75) *.05 (.00).05 (.00) Ø 0.70 (.815) Ø 0.70 (.815) Ø 0.65 (.813)*.03 (.001) Ø 3.85 (.939) Ø 3.80 (.937)*.03 (.001) 38.1 (1.50) 1 4 1 4-Way Code Omit Steel luminum Code 1T SE - 1 Form Tool: Weight: Rougher NFT1-4R Finisher NFT1-4F 3.3 kg (7.3 lbs.)
Catalog HY15-350/US Information Valve/ Compatibility For additional information see Tips on pages 1-6. erformance Curve Drop vs. 1 1 4-Way Long Code Omit Steel luminum 4L Code 1T SE - 1 Standard odies and 1, 4-Way, Long.5 /.13 R (.010 /.005) Ø 3.30 +0.015 (0.130) 0 0.57 (0.810) Ø 9.1 ± 0.05 (1.150 ± 0.00 )* 38.10 ± 0.13 (1.500 ± 0.005) 53.1 (.09) 8.7 (.34) Typ. Ø 4.69 (0.97) 3 3 +0.15 +0.006 0* +0.38 50.8 (.00) 1-1/16 1UN-.05 (.00) --.79 ± 0.13 (.031 ± 0.005) -- 101.6 (4.00) 9.1 (3.) Form Tool: Weight: 53.09 (.090) 8.45 (1.10) 77.7 (3.060) Ø 1.70 (0.500) Typ. 1.58 R (0.06) Typical 35.56 (1.400) 60.0 (.370) 84.58 (3.330) 98.04 (3.860) C1-4L 1 4 8.4 (1.1) 0.8 (.03) Rougher NFT1L-4R Finisher NFT1L-4F 77.7 (3.06) 111.1 (4.37) 17.0 (5.00) 4.3 (.17) R. 4.8 (0.19) Ø 0.65 ± 0.03 (0.813 ± 0.001).03 (.001) 9 * Ø 18.4 (.718) For Orifice Disc 5.4 (1.00).05 (.00).05 (.00) * Ø.5 ± 0.03 (0.876 ± 0.001).03 (.001) * Ø 3.83 ± 0.03 (0.938 ± 0.001).03 (.001) 50.8 (.00) * 3
Catalog HY15-350/US Information Valve/ Compatibility For additional information see Tips on pages 1-6. ITY Winner s Circle X X X X X arker X X X Waterman X X X FS X X X C X X X erformance Curve Drop vs. SI ar 100 6.9 VLVE Winner s Circle arker Waterman FS C Hydraulic Oil 150 SSU @ 100 F (3 cst) Standard odies and 16, -Way 1-5/16 1UNF- (.00) Ø 44.45 (1.750) Ø 35.64 (1.403) Ø 35.51 (1.398) 3.68 (.145) 3.30 (.130).79 (.031) Ø 31.4 (1.37) Ø 31.7 (1.31) (.001) -- --.5 (.010) R. 19.18 (.755) 18.9 (.745) 34.6 (1.349) 34.01 (1.339) 4.74 (.974) 4.49 (.964) Ø 19.05 (.750) 1.59 (.06) R. 30 46.84 (1.844) Min. Ø 3.83 (.938) Ø 8.65 (1.18) Ø 8.60 (1.16) Drop ( ) 80 5.5 60 4.1 40.8 0 1.4 0 LM GM 0 38 10 75 0 114 30 150 40 188 50 (Q) 5 60 C16-0.8 (.03) 76. (3.00) 45.3 (1.78) 4.6 (.97) 57. (.5) 76. (3.00). (.88) 44.5 (1.75) 8.6 (.34) 1 4.3 (.17) R. 65.1 (.56) 5.5 (.) 16 16 -Way Code Omit Steel luminum Code 1 3/4 NTF 16 1 NTF 8T SE - 8 1T SE - 1 16T SE - 16 1 3/4 SG 16 1 SG Steel body only. Form Tool: Weight: Rougher None Finisher NFT16-F 1.5 kg (3.4 lbs.) 4
Catalog HY15-350/US Information Valve/ Compatibility For additional information see Tips on pages 1-6. ITY erformance Curve Drop vs. SI ar 100 6.9 VLVE Winner s Circle arker Waterman FS C Winner s Circle X X X X X arker X X X Waterman X X X FS X X X C X X X Hydraulic Oil 150 SSU @ 100 F (3 cst) Standard odies and 16, 3-Way 1-5/16 1UNF- (.00) Ø 44.45 (1.750) Ø 35.64 (1.403) Ø 35.51 (1.398) 3.68 (.145) 3.30 (.130).79 (.031) Ø 31.4 (1.37) Ø 31.7 (1.31).5 (.010) R..35 (.880).10 (.870) 53.31 (.099) 53.06 (.089) 4.74 (.974) 4.49 (.964) Ø 15.88 (.65) Ø 15.88 (.65) 1.59 (.06) R. 6.84 (.474) 6.59 (.464) 75.39 (.968) Min. 30 Ø 7.05 (1.065) Ø 7.00 (1.0) (.00) Ø 3.83 (.938) Ø 8.65 (1.18) Ø 8.60 (1.16) -- (.001) -- Drop ( ) 80 60 40 0 5.5 4.1.8 1.4 0 LM GM 0 57 15 114 30 171 45 5 60 (Q) 0.8 (.03) 4.6 (.97) C16-3 3 101.6 (4.00) 50.8 (.00) 53. (.09) 8.6 (3.5) 101.6 (4.00). (.88) 44.5 (1.75) 8.8 (.35) 93.7 (3.69) 1 4.3 (.17) R. 4.0 (.16) 16 3 16 3-Way Code Omit Steel luminum Code 1T SE - 1 16T SE - 16 Form Tool: Weight: Rougher NFT16-3R Finisher NFT16-3F 3.0 kg (6.5 lbs.) 5
Catalog HY15-350/US Information Standard odies and 16, 3-Way, Short Valve/ Compatibility For additional information see Tips on pages 1-6. ITY Winner s Circle X X X X X arker X X X X X Waterman X X X X X FS X X X X X C X X X X X erformance Curve Drop vs. SI ar 100 6.9 VLVE Winner s Circle arker Waterman FS C Hydraulic Oil 150 SSU @ 100 F (3 cst) 1-5/16 1UNF- (.00) Ø 44.45 (1.750) Ø 35.64 (1.403) Ø 35.51 (1.398) (.001) -- -- 3.68 (.145) 3.30 (.130).79 (.031) Ø 31.4 (1.37) Ø 31.7 (1.31).5 (.010) R. 17.60 (.693) 17.35 (.683) 46.15 (1.817) 45.90 (1.807) 16.79 (.661) 16.54 (.651) Ø 15.88 (.65) 37.44 (1.474) 37.19 (1.464) Ø 6.35 (.50) 1.59 (.06) R. 55.58 (.188) Min. Ø 5.48 (1.003) Ø 5.43 (1.001) (.00) Ø 3.83 (.938) Ø 8.65 (1.18) Ø 8.60 (1.16) Drop ( ) 80 5.5 60 4.1 40.8 0 1.4 0 LM GM 0 57 15 114 30 171 45 5 60 (Q) 0.8 (.03) 37.3 (1.47) C16-3S 101.6 (4.00) 50.8 (.00) 3 16.7 (.66) 66.7 (.) 85.7 (3.38). (.88) 44.4 (1.75) 8.8 (.35) 93.7 (3.69) 1 4.3 (.17) R. 4.0 (.16) 16 3S 16 3-Way Short Code Omit Steel luminum Code 16T SE - 16 16 1 SG Form Tool: Weight: Rougher NFT16S-3R Finisher NFT16S-3F.4 kg (5.4 lbs.) 6
Catalog HY15-350/US Information Valve/ Compatibility For additional information see Tips on pages 1-6. ITY erformance Curve Drop vs. VLVE Winner s Circle arker Waterman FS C Winner s Circle X X X X X arker X X X Waterman X X X FS X X X C X X X Standard odies and 16, 4-Way Ø 44.45 (1.750) Ø 35.64 (1.403) Ø 35.51 (1.398) 4.64 (.970) 3.68 (.145) 3.30 (.130).13 (.005).5 (.010) R. 1-5/16 1UNF- (.00) 0.8 (.03) 133.4 (5.5) 114.3 (4.50) Typ. Ø 31.4 (1.37) Ø 31.7 (1.31). (.875) 3 C16-4 6.71 (.469).76 (.030) Typ. 81.79 (3.0) 0 Typ. Typ. Typ. Ø 15.88 (.65) 34.14 1.57 (.06) (1.344) 53.09 (.090) 91.9 (3.594) 101.6 (4.00) 50.8 (.00) 103.99 (4.094) 4 4.6 (.97) 53.1 (.09) 81.8 (3.) Ø 7.05 (1.065) Ø 7.00 (1.0) 5.4 (1.00) 30 (.00) Ø 8.65 (1.18) Ø 8.60 (1.16) -- Ø (.001) -- Ø 3.83 (.938) Ø 5.48 (1.003) Ø 5.43 (1.001) (.00) 50.8 (.00) 4.3 (.17) R. 1 93.7 (3.69) 8.6 (.34) Typ. 4.1 (.16) 16 4 16 4-Way Code Omit Steel luminum Code 16T SE - 16 Form Tool: Weight: Rougher NFT16-4R Finisher NFT16-4F 3.75 kg (8.15 lbs.) 7
Catalog HY15-350/US Information Standard odies and 0, -Way Valve/ Compatibility For additional information see Tips on pages 1-6. ITY Winner s Circle X X X X X arker X X X X X Waterman X X X X X FS X X X X X C X X X X X erformance Curve Drop vs. SI ar 100 6.9 VLVE Winner s Circle arker Waterman FS C Hydraulic Oil 150 SSU @ 100 F (3 cst) 1-5/8 1UNF- (.00) Ø 57.66 (.70) Ø 43.65 (1.718) Ø 43.5 (1.713) (.001) -- -- 3.48 (.137) 3.3 (.17).79 (.031) Ø 39.19 (1.543) Ø 39.04 (1.537).5 (.010) R. 0.76 (.817) 0.51 (.807) 44.58 (1.755) 44.3 (1.744) 58.7 (.31) Min. 31.09 (1.4) 30.84 (1.14) Ø 5.40 (1.000) 1.59 (.0) R. 30 Ø 30.16 (1.187) Ø 36.58 (1.440) Ø 36.53 (1.438) Drop ( ) 80 5.5 60 4.1 40.8 0 1.4 0 LM GM 0 38 10 75 0 114 30 150 40 188 50 (Q) 5 60 70 88.9 (3.50) C0-56.4 (.) 0.8 (.03) 8.7 (.34) 1 31.8 (1.5).5 (.50) 88.9 (3.50) 4.3 (.17) R. 8.6 (1.13) 57. (.5) 81.0 (3.19) 4.0 (.16) 0 0 -Way Code Omit Steel Code 0T SE - 0 0 1-1/4 SG Form Tool: Weight: Rougher None Finisher NFT0-F 6.3 kg (14 lbs.) 8
Catalog HY15-350/US Information Valve/ Compatibility For additional information see Tips on pages 1-6. ITY Winner s Circle X X arker Waterman FS C X X erformance Curve Drop vs. SI ar 100 6.9 VLVE Winner s Circle arker Waterman FS C Hydraulic Oil 150 SSU @ 100 F (3 cst) Standard odies and 0, 3-Way, Short 1-5/8 1UNF- (.00) Ø 57.66 (.70) Ø 43.65 (1.718) Ø 43.5 (1.713) (.001) -- -- 3.48 (.137) 3.3 (.17).79 (.031) Ø 39.19 (1.543) Ø 39.04 (1.537).5 (.010) R. 0.76 (.817) 0.51 (.807) 3.95 (.943) 3.70 (.933) 64.4 (.536) 64.17 (.56) 19.97 (.786) 19.7 (.776) Ø 6.35 (.50) 1.59 (.06) R. Ø 5.40 (1.000) 49.35 (1.943) 49.09 (1.933) 30 77.79 (3.0) Min. Ø 33.40 (1.315) Ø 33.35 (1.313) (.00) Ø 30.16 (1.187) Ø 36.58 (1.440) Ø 36.53 (1.438) Drop ( ) 80 60 40 0 5.5 4.1.8 1.4 0 LM GM 0 38 10 75 0 114 30 150 40 188 50 (Q) 5 60 70 0.8 (.03) 50.0 (1.97) C0-3S 101.6 (4.00) 50.8 (.00) 19.8 (.78) 88.9 (3.50) 108.0 (4.5) 8.6 (1.13) 57. (.5) 8.7 (.34) 93.7 (3.69) 4.4 R. (.17) 4.0 (.16) SE-4 G3/8-19 S 0 3S 0 3-Way Short Code Omit Steel Code 0T SE - 0 0 1-1/4 SG Form Tool: Weight: Rougher NFT0S-3R Finisher NFT0S-3F 10.8 kg (. lbs.) 9
Catalog HY15-350/US Information Valve/ Compatibility For additional information see Tips on pages 1-6. ITY MHC Counterbalance Cartridge Valve Code Type Single D Dual 010 Nominal Rating Form Tool: FR-500 Weight: Single Dual Dual VLVE MHC-010 Type -N-4*-10 MHC-010 X X -N-4*-10 X X Code 53 SE-10 through port 53 1.1 kg (.5 lbs.) 1.9 kg (4.10 lbs.) Counterbalance odies and MHC-010 CDD-1010.05 (.00) C'ore #1 SE Tap 1-1/16-1 UN- -- Single 0.6 (.81) 11.4 (.45) 3.3 (.13) 0.3 (.01) Ø 9.16 (1.148) Ø 41.53 Ø 9.9 (1.153) (1.5) Ø 4.69 (.97) Ø 5.15 (.990) 19.1 (.75) 38.1 (1.50) 58.9 (.3).13 (.005).5 (.010) R. 38.1 (1.50) 76. (3.00) 100 8.71 (.34) Dia. Thru Mtg. Holes.7 (.90) 13.7 (.54) 38.9 (1.53) 3.0 (1.6) 30 Valve 11/3 Dia. 50.8 (.00) Min. Finish.5 (.50) 8.6 (3.5) C 30 4.6 (.18) V 60.3 (.38) Cylinder 11/3 Dia. 3.5 (1.8) Ø 19.05 (.750) Ø 19.10 (.75).05 (.00) ilot Ø.3 (.875) Ø.8 (.877).05 (.00) 18.8 (.74) CDD-1010 47.6 (1.88) 7.9 (.31) 7.9 (.31) 76. (3.00) 38.1 (1.50) G 30. (1.19) 11.7 (4.79) Shimmed Non-Vented.4 (.88) 9.40 (.37) Valve & Cylinder s #10 SE (Shown) or #8 SE 59. (.33) Gauge #4 SE Optional 43.7 (1.7) 53.8 (.1).4 (.88) V V1 57.4 (.6) 18.8 (.74) 38.1 (1.50) 76. (3.00).4 (.88) 76. (3.00) 3.5 (1.8) C C1 19.6 (.77) 56.6 (.3) 30
Catalog HY15-350/US Information Valve/ Compatibility For additional information see Tips on pages 1-6. ITY MHC Counterbalance Cartridge Valve Code Type Single D Dual 0 Nominal Rating Form Tool: FR-501 Weight: Single Dual VLVE MHC-0 Type -N-4*-5 MHC-0 X X -N-4*-5 X X Code 53 SE-10 through port 53 1.7 kg (3.75 lbs.).7 kg (5.90 lbs.) Counterbalance odies and MHC-0 CDD-1036 C'ore #14 SE Tap 1-3/16-1 UN- -- Single 15.7 (.6) 3.3 (.13) 0.3 (.01) Ø 3.33 (1.73) Ø 3.46 (1.78) Ø 45.09 Ø 7.86 (1.097) (1.775) Ø 8.3 (1.115) 3.9 (.94) 47.8 (1.88) 44.5 (1.75) 100 19.1 (.75) 88.9 (3.50) 73.0 (.88) 7.9 (.31) 60.3 (.38) 51.6 (.03) 38.1 (1.50) 0 0 Valve 7.9 (.31) Dia. 88.9 (3.50) 5. (.0) Cylinder 11.1 (.44) Dia. Ø 6.98 (1.06) Ø 7.0 (1.064).05 (.00) ilot Ø 5.40 (1.000) Ø 5.45 (1.00).05 (.00) 3.5 (1.8) 44.5 (1.75) 3.80 (.937) 19.1 (.75) 7.9 (.31) CCD-1036 13/3 Thru ( laces) Dual 88.9 (3.50) 44.5 (1.75) Gauge (Optional) #4 SE 88.9 (3.50) Valve s 1& #1 SE (Shown) or #10 SE 8.7 (1.13) 8.7 (1.13) G 67.3 (.65) 66.5 (.6) 10.3 (.41) Dia. Thru Mtg. Holes 7.9 (.31) 3.5 (1.8).4 (.88) V1 V 60. (.37) 0.8 (.8) 55.4 (.18) 76. (3.00) 39.8 (1.57) 60.5 (.38) 7.9 (.31) 155.7 (6.13) Shimmed/ Non-Vented C1 Cylinder s 1 & #1 SE (Shown) or #10 SE C 43.7 (1.7) 31
Catalog HY15-350/US Information Valve/ Compatibility For additional information see Tips on pages 1-6. ITY MHC Counterbalance Cartridge Valve Code Type Single D Dual 05 Nominal Rating Form Tool: Drill Reamer Weight: Single Dual Dual VLVE MHC-05 Type -N-4*-50 MHC-05 X X -N-4*-50 X X Code 54 SE-1 through port 54 FD-91 FR-105 3.3 kg (7.5 lbs.) 5.4 kg (11.90 lbs.) Counterbalance odies and MHC-05 CDD-101.05 (.00) 79. (3.1) 5.3 (.06) 6.9 (1.06) 3.9 (.94) 1.7 (.50) 3.4 (.13) #0 SE 1-5/8-1 UN- 0.3 (.01) Valve -- Ø 43.51 (1.713) Ø 57.91 Ø 43.64 (1.718) (.80) Ø 38.99 (1.535) Ø 39.45 (1.553) Single 31.8 (1.5).5 (.50).13 (.005).5 (.010) R. 13/3 Thru ( laces) 50.8 (.00) 14. (.56) 36.6 (1.44) 101.6 (4.00) 100 47.8 (1.88) 30 114.3 (4.50) 5.1 (.0) 88.9 (3.50) 30 Cylinder 44.5 (1.75) ilot Ø 30.0 (1.190) Ø 30.30 (1.191).05 (.00) Ø 38.15 (1.50) Ø 38.17 (1.503).05 (.00) 3.1 (.91) 76. (3.00) 1.7 (.50) 1.7 (.50) CDD-101 31.8 (1.5) 17.0 (5.00) C Cylinder #16 SE (Shown) or #1 SE 3.0 (.91) 10.3 (.41) Dia. Thru Mtg. Holes 101.6 (4.00) 30.1 (9.06) Non-Vented 95.3 (3.75) 57. (.5) C1 44.5 (1.75) 8.6 (3.5) 101.6 (4.00) 4.6 (.97) V1 V 77.0 (3.03) 95.3 (3.75) 31.8 (1.5) 9.5 (.38) 7.9 (.31) 50.8 (.00) 64.3 (.53) 31.8 (1.5) Valve #16 SE (Shown) or #1 SE 3
Catalog HY15-350/US Information Valve/ Compatibility For additional information see Tips on pages 1-6. ITY MHC Counterbalance Cartridge Valve Code Type Single D Dual 050 Nominal Rating Form Tool: Drill Reamer Weight: Single Dual Dual VLVE MHC-050 MHC-050 X X -N-4*-100 X X Type -N-4*-100 Code 54 SE-1 through port 56 SE-16 through port FD-813 FR-31 5.5 kg (1.00 lbs.) 10.8 kg (3.85 lbs.) Counterbalance odies and MHC-050 CDD-1013 36.3 (1.43) 15. (.60) 3. (.15) 3.6 (.140) Valve Tap 0.3 (.01) -1/4-1 UN- -- 76. (3.00) Ø 57.7 (.73) Ø 57.9 (.78) Ø 54.9 (.160) Ø 55.1 (.170) Single 38.1 (1.50) 76. (3.00).13 (.005).5 (.010) R..5 (.50) 17.0 (5.00) 17/3 Thru ( laces) 30 19.1 (.75) 49.3 (1.94) 7.4 (.85) 76.5 (3.01) 106.4 (4.19) 30 17.0 (5.00) 4.3 (.17) 101.6 (4.00) Ø 50.8 (.001) Ø 50.86 (.003).05 (.00) 61.5 (.4) ilot Ø 54.00 (.16) Ø 54.04 (.18).05 (.00) Cylinder 30. (1.19) CDD-1013 1.7 (.50) 1.7 (.50) 38.1 (1.50) 15.4 114.3 (6.00) (4.50) 65.5 (.58) C Cylinder #0 SE (Shown) or #1 or #16 114.3 (4.50) C1 61.5 (.4) 38.1 (1.50) 13.5 (.53) Dia. Thru Mtg. Holes 1.7 (.50) 17.5 (.69).5 (.50) 17.0 (5.00) 101.6 (4.00) 1.7 (.50).5 (.50) 17.0 (5.00) 80.5 (3.17) 87.9 (11.34) Non-Vented 34.3 (1.35) V1 38.1 (1.50) 114.3 (4.50) V 9.7 (3.65) Valve #0 SE (Shown) or #1 or #16 33
Catalog HY15-350/US Information ilot iston Single and Dual 10 for Single and ilot iston For Valve Use H103** For ilot iston Use 717909 No Seal 717909N una-n 717909V Fluorocarbon 7/8 14UNF- (.00) Ø 30.16 (1.188) Ø 4.05 (.947) Ø 3.93 (.94) Ø 0.68 (.814) Ø 0.57 (.810).5 (.010) R. 16.00 (.0) 15.75 (.60) 4.64 (.970) 4.38 (.960) 18.41 (.75) 18.16 (.715) Ø 11.30 (.445) 0.89 (.035) 0. (.05) R. 1.59 (.06) R. 38.61 (1.50) 38.35 (1.510) 69.85 (.750) Min. Ø 10.31 (.406) Ø 6.76 (.66) --.9 (.115).54 (.100).79 (.031) Ø 15.93 (.67) Ø 15.88 (.65) (.001) -- 16 for Single and ilot iston For Valve Use H161** For ilot iston Use 717910 No Seal 717910N una-n 717910V Fluorocarbon 1-5/16 1UNF- (.00) Ø 44.45 (1.750) Ø 35.64 (1.403) Ø 35.51 (1.398) Ø 31.4 (1.37) Ø 31.7 (1.31) -- 3.68 (.145) 3.30 (.130).79 (.031).5 (.010) R. 19.18 (.755) 18.9 (.745) 34.6 (1.349) 34.01 (1.339) 4.74 (.974) 4.49 (.964) Ø 19.05 (.750) 1.59 (.06) R. 0.89 (.035) 0. (.05) R. 56.48 (.4) 56.3 (.14) 107.06 (4.15) 106.81 (4.05) Ø 19.05 (.750) Ø 19.05 (.750) Ø 8.65 (1.18) Ø 8.60 (1.16) (.001) -- 10 for Dual and ilot iston For Use H103** 18.41 (.75) 18.16 (.715) Typical Ø 11.30 (.445) Typ. 113.16 (4.455) 11.40 (4.45) For ilot iston Use 717917 No Seal 717917N una-n 717917V Fluorocarbon Ø 15.94 (.67) Ø 15.89 (.65) (.0005) 38.61 (1.50) 38.35 (1.510) 3 Ø 11.11 (.437) Typ. End s Conform To C10- (Typ.) 16 for Dual and ilot iston For Use H161** 4.74 (.974) 4.49 (.964) Typical Ø 19.05 (.750) Typ. 176.66 (6.955) 175.90 (6.95) For ilot iston Use 717918 No Seal 717918N una-n 717918V Fluorocarbon Ø 8.65 (1.18) Ø 8.60 (1.16) (.0005) 56.48 (.4) 56.3 (.14) Typical Ø 18.65 (.734) Typ. End s Conform To C16- (Typ.) 34
Catalog HY15-350/US Information lugs General Description arker cavity plugs can be used in any Integrated Hydraulic Circuit where one valve serves several machines and/or options. Two machines may have identical circuits except for one having a pressure reducing function, and the other not having this function. The machine that does not require this function can have the pressure reducing function replaced by a cavity plug; thereby utilizing a common body for both machines. Specifications Maximum Working - 350 ar (5000 SI) - Steel Symbols -Way 4-Way 3-Way 4-Way Special 1 3 4 lug (1) -Way XX- lug Thread () Code lug Thread 08* 3/4-16 10 7/8-14 1 1-1/16-1 16 1-5/16-1 * 08 Nose Diameter = 1/ Consult Factory for Shaded reas. Type Type Code Type Two Way 3 Three Way 4 Four Way (1) 3-Way XX-3 Seals (3) () (1) 4-Way XX-4 Type Two Way Three Way Four Way Code 1 1 3 1 3 4 Omit C C C C C C C C C O O C O O O C O C O O O C O C C O O O C O O D *O *O *C *C C = locked O = Open * Only vailable In s 08 and 10. Consult Factory for Shaded reas. (4) (3) () (1) 4-Way Special XX-4C (4) (3) () Code Seals Omit Nitrile V Fluorocarbon 35
Catalog HY15-350/US Information General Description Interrupt, -Way, D03 Cartpak. For additional information see Tips on pages 1-6. Schematic C URIGHT VLVE SIDE T T SULTE SIDE D03 D03 Cartpak Code lug Seals Omit Nitrile V Fluorocarbon N Gauge Interrupt -Way lug Seals supplied with: Gage lug Installed O-Ring late, O-Rings and Drive in Kit C Code luminum S Steel (Ductile Iron) C: INVERTED VLVE SIDE T T SULTE SIDE H103 10 Gauge C: Cartpak odies Series D03-N 16. (0.64) C FR101 101 (has check) 15.5 (0.61) 45.0 (1.77) 5.5 (0.1) Drill Thru (Typ. 4 laces) C10-6.3 (0.5) C: 104.3 (4.11) 3.9 (0.15) 48.3 (1.90) 7.5 (0.30) 40.5 (1.59) H04 3.5 (0.14) 3.5 (0.14) 3.9 (0.15) T T T when is Inverted when is Inverted URIGHT INVERTED C: SE #4 O-Ring late 31.8 (1.5) 19.4 (0.76) when is Inverted T when is Inverted H103 10 6.4 (1.04) GGE 40.0 (1.58) Direction: Upright Direction: Upright Direction: Upright Direction: Inverted T G G G G ump Side ump Side Regulator ump Side Control Tank Side 36
Catalog HY15-350/US Information Cartpak odies Series D03-N General Description Interrupt, -Way, D03 Cartpak. For additional information see Tips on pages 1-6. Schematic URIGHT VLVE SIDE T 5.5 (0.1) Drill Thru (Typ. 4 laces) 3.9 (0.15) T T when is Inverted C Gauge 16. (0.64) C C10-3.5 (0.14) when is Inverted SE #4 URIGHT 6.4 (1.04) D03 D03 Cartpak Code lug Seals Omit Nitrile V Fluorocarbon T SULTE SIDE N Interrupt -Way lug Seals supplied with: Gage lug Installed O-Ring late, O-Rings and Drive in Kit Code luminum S Steel (Ductile Iron) 15.5 (0.61) 45.0 (1.77) 6.3 (0.5) 7.5 (0.30) 40.5 (1.59) 104.3 (4.11) 3.9 (0.15) 48.3 (1.90) 3.5 (0.14) INVERTED T 19.4 (0.76) O-Ring late when is Inverted 31.8 (1.5) GGE T when is Inverted 40.0 (1.58) C: DSL101* D101* Direction: Upright C: NVH101 FV101 Direction: Upright T G G lock Valve (Normally Closed or Normally Open) ump Side Needle 37
Catalog HY15-350/US Information Cartpak odies Series D03-NR General Description Interrupt, Reducing Function, D03 Cartpak. For additional information see Tips on pages 1-6. 5.5 (0.1) Drill Thru (Typ. 4 laces) 3.9 (0.15) Schematic URIGHT C VLVE SIDE T Gauge 4.1 (0.95) C10-3 C 7.5 (0.30) T SE #4 URIGHT 18.6 (0.73) D03 D03 Cartpak Code lug Seals Omit Nitrile V Fluorocarbon NR Interrupt Reducing supplied with: Gage lug Installed O-Rings and Drive in T SULTE SIDE lug Seals Code luminum S Steel (Ductile Iron) C: RH10 Direction: Upright C: RH101 R103 Direction: Upright 19.3 (0.76) 45.0 (1.77) 6.3 (0.5) C: 48.3 (1.90) 7.5 (0.30) 40.5 (1.59) DSL103 D103 Direction: Upright 104.3 (4.11) 3.5 (0.14) T C: 31.8 (1.5) 0.7 (0.81) DSL103N D103N Direction: Upright GGE 40.0 (1.58) T G G G G Reducing Reducing / Relieving Normally Open Dump (Normally to Tank) 38
Catalog HY15-350/US Information Cartpak odies Series D03-NS General Description Interrupt, Sequence Function, D03 Cartpak. For additional information see Tips on pages 1-6. Schematic URIGHT C VLVE SIDE T Gauge 15.9 (0.) C C10-3 5.5 (0.1) Drill Thru (Typ. 4 laces) 3.5 (0.14) 3.9 (0.15) T T when is Inverted when is Inverted SE #4 URIGHT 6.4 (1.04) D03 D03 Cartpak Code lug Seals Omit Nitrile V Fluorocarbon T SULTE SIDE NS Interrupt Sequence lug Seals supplied with: Gage lug Installed O-Ring late, O-Rings and Drive in Kit Code luminum S Steel (Ductile Iron) 5.7 (1.01) 45.0 (1.77) 6.3 (0.5) Machine s 7.5 (0.30) 40.5 (1.59) 104.3 (4.11) 3.9 (0.15) 48.3 (1.90) 3.5 (0.14) INVERTED T 7.3 (1.07) O-Ring late when is Inverted 31.8 (1.5) GGE T when is Inverted 40.0 (1.58) C: H101 Direction: Upright C: DSL103 D103 Direction: Upright T G G Sequence Function Dump 39