RESOLUTIONS ADOPTED AT THE 31 st EA GENERAL ASSEMBLY

Similar documents
RESOLUTIONS OF THE 40 th EA GENERAL ASSEMBLY

Resolutions IAF Thirtieth Annual General Assembly New Delhi, India

Final Resolutions IAF Thirty-first Annual General Assembly Vancouver, Canada 28 and 30 October 2017

Developments in European Accreditation. Graham Talbot Chairman

Resolutions IAF Thirty-second Annual General Assembly Singapore 29 and 31 October 2018

Mutual recognition of conformity assessment in CETA

Implementation. CETA Protocol on the mutual acceptance of the results of conformity assessment. of the. Dr Andreas Steinhorst EA Executive Secretary

ADOPTED RESOLUTIONS OF THE ELEVENTH ILAC GENERAL ASSEMBLY SYDNEY, AUSTRALIA 28 & 30 OCTOBER 2007

International Accreditation Forum, Inc. Resolutions IAF Twenty-Ninth Annual General Assembly Milan, Italy

International Accreditation Forum, Inc.

International Accreditation Forum, Inc. Resolutions adopted at the IAF 22 nd General Assembly 19 and 21 October 2008 Clarion Hotel, Stockholm, Sweden

International Accreditation Forum, Inc.

Survey on: Accreditation of medical laboratories

LA VERSION ELECTRONIQUE FAIT FOI

FSSC Certification scheme for food safety systems in compliance with ISO 22000: 2005 and technical specifications for sector PRPs.

IAF Policy Document STRUCTURE OF THE INTERNATIONAL ACCREDITATION FORUM, INC.

DEED OF AMENDMENT OF ARTICLES OF ASSOCIATION EUROPEAN CO-OPERATION FOR ACCREDITATION (EA)

International Accreditation Forum, Inc. (IAF)

IAF/ILAC Multi-Lateral Mutual Recognition Arrangements (Arrangements): Requirements and Procedures for Evaluation of a Regional Group

IAF Guidance on Cross Frontier Accreditation

ADOPTED RESOLUTIONS OF THE NINETEENTH ILAC GENERAL ASSEMBLY MILAN, ITALY 6 NOVEMBER 2015

EUROPEAN COMMISSION HEALTH AND CONSUMERS DIRECTORATE-GENERAL

ADOPTED RESOLUTIONS OF THE SEVENTEENTH ILAC GENERAL ASSEMBLY SEOUL, KOREA 25 OCTOBER 2013

GUIDANCE FOR THE PROMOTION OF THE APLAC MRA

ADOPTED RESOLUTIONS OF THE TWENTY-FIRST ILAC GENERAL ASSEMBLY VANCOUVER, CANADA 30 OCTOBER 2017

Message from the President

Liaisons Report by the BIML Additional information

Article 1 General principles and objectives

STATUTE FOR THE STANDARDS AND METROLOGY INSTITUTE FOR ISLAMIC COUNTRIES (SMIIC)

TITLE III--IMPROVING THE SAFETY OF IMPORTED FOOD

Technical Barriers to Trade (TBT) Annex to the SADC Protocol on Trade

AFRAC BYLAWS AFRICAN ACCREDITATION COOPERATION

EA 1/17 S3 - EA Procedure for the investigation and resolution of Complaints and Appeals

COMMISSION IMPLEMENTING REGULATION (EU) /... of XXX

ADMINISTRATIVE COMMISSION FOR THE COORDINATION OF SOCIAL SECURITY SYSTEMS. Main conclusions of the 347 th meeting of the Administrative Commission

ANSI PROCEDURES FOR U.S. PARTICIPATION IN THE INTERNATIONAL STANDARDS ACTIVITIES OF ISO

ANSI PROCEDURES FOR U.S. PARTICIPATION IN THE INTERNATIONAL STANDARDS ACTIVITIES OF ISO

Proposal for a REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL

HP INC. BOARD OF DIRECTORS NOMINATING, GOVERNANCE AND SOCIAL RESPONSIBILITY COMMITTEE CHARTER

E/ECE/TRANS/505/Rev.3

PROCEDURE FOR HANDLING APPLICATIONS FOR MEMBERSHIP IN IAF

OIML G 17 GUIDE. Edition 2015 (E) ORGANISATION INTERNATIONALE INTERNATIONAL ORGANIZATION. Guide for CIML Members DE MÉTROLOGIE LÉGALE

Proposal for a REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL

GENERAL REPORT ON THE OUTCOME OF A SERIES OF MISSIONS CARRIED OUT IN ALL MEMBER STATES FROM JUNE 2004 TO OCTOBER 2005 TO EVALUATE

Message from the President

PROCESS FOR REQUESTING AND PROCESSING NOMINATIONS FOR JCTLM LISTING OF REFERENCE MEASUREMENT LABORATORY SERVICES

CONSOLIDATED VERSION OF THE EOTA STATUTES April

Standards and Certification Training

Screening report. Montenegro

REPORT OF THE FOURTEENTH MEETING OF THE FLEP-FORUM HELD IN SANTIAGO DE COMPOSTELLA ON 14 AND 15 JUNE 1999

45th CIML Meeting. Orlando, Florida, USA ( )

LIMITE EN. Brussels, 30 March 2010 CONFERENCE ON ACCESSION TO THE EUROPEAN UNION CROATIA AD 9/10 LIMITE CONF-HR 9

Energy Queensland Limited Regulatory Committee Charter

UPDATE ON THE IMPLEMENTATION OF THE NEW LEGISLATIVE FRAMEWORK

Transition document Transition document, Version: 4.1, October 2017

Proposal for a COUNCIL DECISION

Organization and Procedures for the Committee on Standardization of Oilfield Equipment and Materials: Policy Document

HP INC. BOARD OF DIRECTORS NOMINATING, GOVERNANCE AND SOCIAL RESPONSIBILITY COMMITTEE CHARTER

International Accreditation Forum, Inc. (IAF)

Summary of Revisions to the ANSI Essential Requirements:

Mission of Montenegro to the European Union

Proposal for a DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL

COMMISSION OF THE EUROPEAN COMMUNITIES. Proposal for a COUNCIL DECISION

Proposal for a DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL

Screening report Croatia

INTERNAL REGULATIONS PART 2: COMMON RULES FOR STANDARDIZATION WORK

Open Trusted Technology Provider Standard (O-TTPS) Certification Program O-TTPS Recognized Assessor Agreement

Declaration of conformity Conformity assessment of a trust service in accordance with the eidas EU Regulation 1

Consultation draft 31 March, 2005

EUROPEAN COMMISSION Directorate-General for Education and Culture

Operating Procedures and Policies for the Microplate Standards Advisory Committee of the Society for Laboratory Automation and Screening

Annex II: Achievement of targets for global expected accomplishments and lessons learned over

RULES OF PROCEDURE. United States National Committee for the IECQ (USNC/IECQ) 11NOV2015 Ed.3

EUROPEAN COMMISSION DIRECTORATE-GENERAL FOR HEALTH AND FOOD SAFETY DIRECTORATE-GENERAL FOR AGRICULTURE AND RURAL DEVELOPMENT

COMMUNICATION FROM THE COMMISSION TO THE COUNCIL, THE EUROPEAN PARLIAMENT, THE EUROPEAN ECONOMIC AND SOCIAL COMMITTEE AND THE COMMITTEE OF THE REGIONS

ANNEX I 1. Mutual recognition in relation to conformity assessment (Article 15) TABLE OF CONTENTS

APPOINTMENT OF ZURICH ENGINEERING AS A NOTIFIED BODY IN THE UNITED KINGDOM UNDER ARTICLE 20 OF THE PRESSURE EQUIPMENT DIRECTIVE - DIRECTIVE 2014/68/EU

IECEE PUBLICATION IECEE 01-S. IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System)

TECHNICAL BARRIERS TO TRADE

Food Act 1. Passed RT I 1999, 30, 415 Entered into force in accordance with 66.

Changes to the TNI 2015 Standard. Shawn Kassner Laboratory Proficiency Testing Committee

The role of Standards and Quality Infrastructure in Trade Facilitation: The UNIDO Approach

An unofficial translation of LOV nr 04: Act on measurement units, measurements and standard time.

This document is meant purely as a documentation tool and the institutions do not assume any liability for its contents

New Jersey State Board of Accountancy Laws

The Role of Standards and Quality Infrastructure in Trade Facilitation

AAQG RMC Oversight Process

FSC PROCEDURE. Processing Complaints in the FSC Certification Scheme. Forest Stewardship Council. FSC-PRO (V2-0) EN Draft 21-0

STATUTORY INSTRUMENTS. S.I. No. 555 of 2017

Opinion 3/2019 concerning the Questions and Answers on the interplay between the Clinical Trials Regulation (CTR) and the General Data Protection

COMMISSION REGULATION (EU)

Number 7 of 2006 AVIATION ACT 2006 ARRANGEMENT OF SECTIONS. 3. Amendment of Part III (Eurocontrol Convention) of Act of SCHEDULE 1 SCHEDULE 2

Subject : Amendment to Simplified procedure for Grant of licence - category of laboratories & exclusion of Chartered Engineer-regd

The Director General s Report

Bylaws Changes for Membership Approval As of October 20, 2017

National Regulator for Compulsory Specifications Act (Act 5 of 2008) hereby

STATUTES AND RULES OF PROCEDURE

Board Audit Committee Charter

Regulations for Attestation, Certification and Inspection of SKG-IKOB Certificatie B.V.

ANSI Essential Requirements: Due process requirements for American National Standards

Transcription:

EA/GA(13)09 RESOLUTIONS ADOPTED AT THE 31 st EA GENERAL ASSEMBLY 29 & 30 MAY 2013 PARIS, FRANCE EA Resolution 2013 (31) 01 The General Assembly endorses the revised EA Rules of Procedure (EA-1/17) where a new sentence under point 7.1.2 is added to complete the rules for EA elections (Document EAEX(13)05) and address the case where the results of a ballot are a tie. EA Resolution 2013 (31) 02 The General Assembly ratifies the results of the electronic ballots that have just been completed and orally reported on EA-3/XX: EA Policy for the Accreditation of Organic Production Certification and EA- 2/13 Supplement 1 Interpretation of terminology used in clause 5.1 and guidelines to assessment focus. EA Resolution 2013 (31) 03 The General Assembly notes the draft EA Work Programme 2014 as presented to the meeting and mandates the Executive Committee to finalise it as necessary to take account of the Action Plan 2014-2017 supporting the future new FPA, before submission to the European Commission and EFTA by 30 September 2013. EA Resolution 2013 (31) 04 The General Assembly mandates the Executive Committee to agree with EC DG CLIMA a Work Programme and budget for the implementation of the EU/ETS Accreditation & Verification Regulation and gives the EA Chairman the mandate to sign the corresponding agreement with DG CLIMA in due course. EA Resolution 2013 (31) 05 The General Assembly mandates the Executive Committee to finalize the negotiations on, and the Chairman to sign the renewed Framework Partnership Agreement for 2014-2017 with the EC and EFTA, once the Executive Committee is satisfied that all issues raised during the negotiations have been satisfactorily addressed. EA Resolution 2013 (31) 06 The General Assembly elects the following officers to the EA Executive Committee for a two-year mandate starting on 1 January 2014: EA Chair: EA Vice-Chair: EA Multilateral Agreement Council Chair: EA Horizontal Harmonization Committee Chair: EA Laboratory Committee Chair: EA Certification Committee Chair: EA Inspection Committee Chair: EA Communications & Publications Committee Chair: Thomas FACKLAM (DAkkS) Geir SAMUELSEN (NA) Nicole MEURÉE - VAN LAETHEM (BELAC) Ignacio PINA (ENAC) Paolo BIANCO (ACCREDIA) Leopoldo CORTEZ (IPAC) Rolf STRAUB (SAS) Peter KRONVALL (SWEDAC) 1/5

Four additional members of the Executive Committee: Three members of the Financial Oversight Committee: Vagn ANDERSEN (DANAK) Bizerka BAJZEK-BREZAK (HAA) Rozsa RING (NAT) Jan VAN DER POEL (RvA) Claudio BOFFA (NAB-MALTA) Elza JANEVA (BAS) Paul STENNETT (UKAS) EA Resolution 2013 (31) 07 Stakeholder status to the European Directorate for the Quality of Medicines & HealthCare of the Council of Europe (EDQM), and to enter into an agreement with EDQM in accordance with EA-1/15: EA Policy for Relations with Stakeholders. EA Resolution 2013 (31) 08 Stakeholder status to the European Federation for Non-Destructive Testing (EFNDT), and to enter into an agreement with EFNDT in accordance with EA-1/15: EA Policy for Relations with Stakeholders. EA Resolution 2013 (31) 09 Stakeholder status to the Quality and Safety System for Specialty Feed Ingredients and their Mixtures (FAMI-QS asbl), and to enter into an agreement with FAMI-QS in accordance with EA-1/15: EA Policy for Relations with Stakeholders. EA Resolution 2013 (31) 10 The General Assembly adopts the Annual Financial Audit Report for 2012 (Document EA/GA(13)05) and certificate of expenses claimed under 2012 Operating Grant (Document EA/GA(13)06) provided explanatory comment is given on exceptional expenditures by the accountant. EA Resolution 2013 (31) 11 The General Assembly accepts the Financial Oversight Committee s Report on EA 2012 Accounts (Document EA/GA(13)24). EA Resolution 2013 (31) 12 The General Assembly approves the financial accounts for 2012 (Document EA/GA(13)07). EA Resolution 2013 (31) 13 The General Assembly approves the allocation of 2012 budget result ( -21.106) to the reserves. EA Resolution 2013 (31) 14 The General Assembly, acting upon recommendation from the Executive Committee, approves the revised budget and notes the forecast of the accounts for 2013 (Document EA/EX(13)56). EA Resolution 2013 (31) 15 The General Assembly approves that the contribution of EA included in the budgetary proposal annexed to EA s application for an Action Grant with DG CLIMA is paid out of the membership fees received by EA for 2013 and 2014. 2/5

EA Resolution 2013 (31) 16 The General Assembly approves the proposed EA activity-based budget for 2014 (Document EA/GA(13)33) and fee schedule (Document EA/GA(13)34). EA Resolution 2013 (31) 17 The General Assembly, according to the French rules providing that this appointment is valid during 6 years, agrees to amend EA Resolution 2012(29)11 adopted in May 2012 as follows: The General Assembly appoints Philippe DAHINGER, Statutory Auditor, member of the Regional Association of Statutory Auditors in Paris, registered with the Association of Chartered Accountants of the Paris Region, as Statutory Auditor of EA until the General Assembly meeting at which the 2015 accounts will be approved. EA Resolution 2013 (31) 18 The General Assembly grants discharge from liability to the members of the EA Executive Committee for the policy conducted by them during the financial year 2012 in accordance with Article 18.5 of the EA Articles of Association. EA Resolution 2013 (31) 19 The General Assembly approves the 2014 Work Programme of the EA MLA Council as included in the draft EA Work Programme 2014 presented to the meeting. EA Resolution 2013 (31) 20 The General Assembly approves the 2014 Work Programme of the Horizontal Harmonisation Committee as included in the draft EA Work Programme 2014 presented to the meeting. EA Resolution 2013 (31) 21 The General Assembly, acting upon recommendation from the Horizontal Harmonization Committee, endorses the withdrawal of EA-3/09: Surveillance and Reassessment of Accredited Organisations. EA Resolution 2013 (31) 22 The General Assembly agrees that the Horizontal Harmonization Committee starts a new work item to revise EA-2/17: EA Guidance on the horizontal requirements for the accreditation of conformity assessment bodies for notification purposes. EA Resolution 2013 (31) 23 The General Assembly, acting upon recommendation from the Executive Committee, resolves that while the document EA-1/22: EA Policy for Conformity Assessment Schemes is being revised, and with a view to simplifying, streamlining and decentralizing the endorsement process, EA will apply the principles set forth in Document EAEX(13)47. EA Resolution 2013 (31) 24 The General Assembly approves the 2013/2014 Work Programme of the Communications and Publications Committee (Document EAGA(13)12). EA Resolution 2013 (31) 25 The General Assembly approves the 2014 Work Programme of the Laboratory Committee as included in the draft EA Work Programme 2014 presented to the meeting. 3/5

EA Resolution 2013 (31) 26 The General Assembly endorses the withdrawal of: - EA-3/05: Guidelines for Training Courses for Assessors used by Laboratory Accreditation Schemes; - EA-3/06: Guidelines for Selection of Participants to Courses for the Training of assessors involved in Assessments of Laboratories applying for Accreditation (previously EAL G8); and - EA-3/07: Programme for Course for Tutors for Assessor Training; and, acting upon recommendation from the Laboratory Committee, adopts ILAC G3:08/2012: Guidelines for Training Courses for Assessors Used by Accreditation Bodies as a guidance document for all EA Members. EA Resolution 2013 (31) 27 The General Assembly endorses the withdrawal of EA-4/07: Traceability of Measuring and Test Equipment to National Standards and, acting upon recommendation from the Laboratory Committee, adopts ILAC P10:01/2013: ILAC Policy on Traceability of Measurement Results as a mandatory document for all EA Members. EA Resolution 2013 (31) 28 Taking into account that EA NABs do not provide PT services, the General Assembly endorses the recommendation by the Executive Committee that EA NABs shall not provide such services. The requirement will be introduced in EA-1/17 Supplement 1 Criteria for Membership. EA Resolution 2013 (31) 29 The General Assembly approves the 2014 Work Programme of the Certification Committee (Document EAGA(13)10). EA Resolution 2013 (31) 30 The General Assembly, acting upon recommendation from the Certification Committee, resolves that when accrediting CBs for the purpose of the End of Waste Regulations according to ISO/IEC 17021, the certification of the management system of the producers by the CBs shall be against ISO 9001 and the requirements in the applicable End of Waste Regulations this requires that compliance with all the ISO/IEC 17021 requirements, including annual surveillance audits and recertification on the third year, will be fulfilled. The accreditation certificate shall additionally refer to the End of Waste Regulations detailing the types of products covered. The certificates issued by accredited CBs to producers shall refer to the relevant End of Waste Regulation(s) and specify the type of products covered by the management system. Moreover, upon request and agreement with the national authorities, the CBs can be accredited under EN 45011 or ISO/IEC 17065 for the certification of the end of waste process, using the appropriate management system requirements and the applicable End of Waste Regulations requirements. EA Resolution 2013 (31) 31 The General Assembly, acting upon recommendation from the Certification Committee, resolves that accreditation of CBs providing certification according to EN 15224 can be provided as a standalone activity. In case of an audit to EN 15224 delivering two certificates (ISO 9001 and EN 15224), the CB needs to confirm this with a proper contract review and state on the audit objectives and plan; the CB needs to be accredited for both ISO 9001 and EN 15224 and follow the relevant EA and IAF mandatory documents. 4/5

EA Resolution 2013 (31) 32 The General Assembly endorses the withdrawal of EA-7/05: EA Guidance on the Application of ISO/IEC 17021:2006 for Combined Audits and, acting upon recommendation from the CC Chair on behalf of the Certification Committee, adopts IAF MD11:2013: IAF Mandatory Document for the Application of ISO/IEC 17021 for Audits of Integrated Management Systems as a mandatory document for all EA Members. EA Resolution 2013 (31) 33 The General Assembly approves the 2014 Work Programme of the Inspection Committee as included in the draft EA Work Programme 2014 presented to the meeting. EA Resolution 2013 (31) 34 The General Assembly agrees that the Inspection Committee starts a new work item to revise EA- 5/02: Guidance on the application of EN 45004 in recurrent inspection of motor vehicles. EA Resolution 2013 (31) 35 The General Assembly agrees that the Inspection Committee after the approval of the ILAC document on this topic shall review if EA-5/03: Guidance for the implementation of ISO/IEC 17020 in the field of crime scene investigation should be revised or revoked. EA Resolution 2013 (31) 36 The General Assembly endorses the recommendation by the Executive Committee not to support a revision of ISO/IEC 17011. EA NABs are invited to approach their standardisation bodies to promote the EA position. EA Resolution 2013 (31) 37 The General Assembly agrees the following dates and venues for future meetings: 20-21 November 2013 in Oslo, Norway 27-28 May 2014 in Prague, Czech Republic XX-XX October/November 2014 in Austria XX-XX May/June 2015 EA Resolution 2013 (31) 38 The General Assembly expresses its appreciation for the excellent arrangements and support services provided by COFRAC for the 31 st General Assembly on 29-30 May 2013. End of resolutions adopted at the 31 st EA General Assembly. ********* 5/5