India Government Mint, Alipur, Kolkata Pin- 700053 India Ph. No: 91-33-24014132-35, 24014821 Fax No: 033-24010553 CIN: U22213DL2006GOI144763 E-Mail: calmint@spmcil.com Web: www.igmkolkata.spmcil.com GSTIN : 19AAJCS6111J2Z4 Not Transferable Security Classification: TENDER DOCUMENT F PURCHASE OF: PROCUREMENT OF TURNING INSERTS & PARTING INSERTS Tender Number: 6000011756 /DIEDEPT.&GWS, Dated: 19.12.2018 This Tender Document Contains Pages. Tender Document is sold to: The Bidder, INDIA ( 104573 ) Details of Contact person in SPMCIL regarding this tender: Name: Biplab Basak Designation: Assistant Manager (MM) Address: IGMK (India Government Mint, Kolkata) India T01.1
Section1: Notice Inviting Tender (NIT) 6000011756 /DIEDEPT.&GWS 19.12.2018 (SPMCIL's Tender SI No.) (Date) 1. Sealed tenders are invited from eligible and qualified tenderers for supply of following goods & services: Sch d. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 Brief Description of Goods/services Turning Insert(CNMG 120408-NM4Wpp20) SPME001211 Parting Blade(XLCFN 2603J31-FX)3.1mm SPTL004445 Turning Insert DNMG 150612 NM9 WAP 30 SPME001215 Inserts Carbide CCMT 09T308 SPTL001866 TC Insert(FX 3.1 No.15-M1 WTA33) SPTL002190 Turning Inserts VBMT 160404- PS5 WPP20 SPME038542 Turning Insert CCGW 09T308-2MC PBC40S SPME040103 TC Turning Insert(CNMA 120412 WCB50) SPTL002192 Insert CCMT 12 04 08 SPTL004190 Inserts Carbide CCMT 09T308 SPTL001866 Insert CNMG120408 SPTL003872 Insert DNMG 11 04 08 SPTL004191 Inserts Carbide CCMT 09T308 SPTL001866 Quantity (with unit) Earnest Money (In Rupee) 130.000 EA 0.00INR NIL 0.00 11.000 nos 200.000 EA 30.000 EA 30.000 EA 100.000 EA 10.000 EA 10.000 EA 30.000 nos 30.000 EA 30.000 EA 30.000 nos 30.000 EA Type of Tender (Two Bid/ PQB/ EOI/ RC/ Development/ Indigenization/ Disposal of Scrap/ Security Item etc.) Dates of sale of tender documents: Place of sale of tender documents Remarks ONE-BID LIMITED From 19.12.2018 to 29.01.2019 during office hours. INDIA GOVT. MINT, KOLKATA Closing date and time for receipt of tenders 29.01.2019 15:00:00 Place of receipt of tenders TENDER BOX, INDIA GOVT. MINT, KOLKATA Sec01.1
Time and date of opening of tenders 29.01.2019 15:30:00 Place of opening of tenders INDIA GOVT. MINT, KOLKATA Nominated Person/ Designation to Receive Bulky Tenders (Clause 21.21.1 of GIT) Biplab Basak Assistant Manager (MM) 2.Interested tenderers may obtain further information about this requirement from the above office. They may also visit our website mentioned above for further details. 3.Tenderers shall ensure that their tenders, duly sealed and signed, complete in all respects as per instructions contained in the Tender Documents, are dropped in the tender box located at the address given below on or before the closing date and time indicated in the Para 1 above, failing which the tenders will be treated as late and rejected. 4.In the event of any of the above mentioned dates being declared as a holiday/ closed day for the purchase organization, the tenders will be sold/ received/ opened on the next working day at the appointed time. 5.The tender documents are not transferable....... (Name Designation, Address telephone number etc of the officer signing the document) For and on behalf of... Sec01.2
Section II: General Instructions to Tenderers (GIT) Part 1: General Instructions Applicable to all type of Tenderers Please refer to our website for further http://www.spmcil.com/spmcil/uploaddocument/git.pdf Sec02.1
Section II: General Instructions to Tenderers (GIT) Part II: Additional General Instructions Applicable to Specific type of Tenderers Please refer to our website for further http://www.spmcil.com/spmcil/uploaddocument/git.pdf Sec02.2
Section III: Specific Instructions to Tenderers (SIT) The following Special Instructions to Tenderers will apply for this purchase. These special instructions will modify/ substitute/ supplement the corresponding General Instructions to Tenderers (GIT) incorporated in Section II. The corresponding GIT clause numbers have also been indicated in the text below: In case of any conflict between the provision in the GIT and that in the SIT, the provision contained in the SIT shall prevail. (Clauses of GIT listed below include a possibility for variation in their provisions through SIT. There could be other clauses in SIT as deemed fit.) Sr No GIT Clause No. Topic SIT Provision 01 4 Eligible Goods and Services (Origin of The origin of goods should be India only. Goods) 02 8 Prebid Conference NA 03 9 Time Limit for receiving request for NA clarification of Tender Documents 04 11.2 Tender Currency Supplier is requested to quote price within 2 Decimal place.quotation with price quote beyond 2 decimal place is ignored. 05 12.10 Applicability of Octroi and Local taxes NA 06 12.14 Customs Duty NA 07 13 Indian Agent NA 08 19 Tender Validity 90 days from the date of open of the tender. 09 20.4 Number of Copies of Tenders to be submitted A tenderer shall submit two copies of its tender marking them as "Original" and "Duplicate" 10 20.8 Signing & Sealing of Tender Each page of the tender document should be signed & sealed. Section X and Section XII should be filled up accordingly. 11 21.2 Taxes & Duties If the tenderer fails to include taxes & duties in the tender, no claim thereof will be considered by the purchaser afterwards. Sec03.1
Section IV: General Conditions of Contract (GCC) Please refer to our website for further http://www.spmcil.com/spmcil/uploaddocument/gcc.pdf Sec04.1
Section V: Special Conditions of Contract (SCC) The following Special Conditions of Contract (SCC) will apply for this purchase. The corresponding clauses of General Conditions of Contract (GCC) relating to the SCC stipulations have also been incorporated below. These Special Conditions will modify/ substitute/ supplement the corresponding (GCC) clauses. Whenever there is any conflict between the provision in the GCC and that in the SCC, the provision contained in the SCC shall prevail. (Clauses of GCC listed below include a possibility for variation in their provisions through SCC. There could be other clauses in SCC as deemed fit) Sl.No. GCC Clause No. Topic SCC Provision 01 8.2 Packing and Marking Items should be suitably packed. The packing should be weather proof and should be made water proof to prevent damage during transit. The supplier will also be responsible for unloading and stacking at Mint Store as instructed by the competent authority. 02 10 Delivery Schedule The successful bidder has to supply the materials within 90 days from the date of issue of Mint PO. 03 11.2 Transportation of Domestic Goods To be borne by the supplier. 04 12.2 Insurance To be borne by the supplier. 05 16.2, 16.4 Warrantee Clause The Inserts & Blades will be Warranted/Guaranted/Guaranteed for 12 months from the date of supply of the materials. 06 20.1 Price Adjustment Clause NA 07 22, 22.1, 22.2, 22.4, 22.3, 22.6 Terms and Mode of payments For materials : Within 30 days after full receipt, acceptance, approval of concerned authority and subject to submission of bill triplicate and advance money receipt.for retrofitting : Within 30 days after full receipt, acceptance, approval of concerned authority and subject to submission of bill triplicate and advance money receipt. 08 24 LD If the supplier fails to deliver any or all of the goods or fails to perform the services within the time frame(s) incorporated in the contract, India Govt. Mint, Kolkata shall, without prejudice to other rights and remedies available to India Govt. Mint,Kolkata under the contract, deduct from the contract price, as liquidated damages, a sum equivalent to the 0.5% of the delivered price of the delayed goods and/ or services for each week of delay or part thereof until actual delivery or performance, 09 24 LD (Contd.) subject to a maximum deduction of the 10% of the delayed goods' or services' contract price(s). Sec05.1
Sl.No. GCC Clause No. Topic SCC Provision During the above mentioned delayed period of supply and / or performance, the conditions incorporated undergcc Shall also apply. Sec05.2
Schedule No. Breif Description of goods and services (Related Specifications etc.are in Section-VII) Section VI: List of Requirements Accounting Unit Quantity Amount of Earnest Money Remarks 1 SPME001211 Turning Insert(CNMG 120408-NM4Wpp20) 2 SPTL004445 Parting Blade(XLCFN 2603J31-FX)3.1mm 3 SPME001215 Turning Insert DNMG 150612 NM9 WAP 30 4 SPTL001866 Inserts Carbide CCMT 09T308 5 SPTL002190 TC Insert(FX 3.1 No.15-M1 WTA33) 6 SPME038542 Turning Inserts VBMT 160404- PS5 WPP20 7 SPME040103 Turning Insert CCGW 09T308-2MC PBC40S 8 SPTL002192 TC Turning Insert(CNMA 120412 WCB50) 9 SPTL004190 Insert CCMT 12 04 08 10 SPTL001866 Inserts Carbide CCMT 09T308 11 SPTL003872 Insert CNMG120408 12 SPTL004191 Insert DNMG 11 04 08 13 SPTL001866 Inserts Carbide CCMT 09T308 EA 130.000 0.00 INR NIL 0.00 nos 11.000 EA 200.000 EA 30.000 EA 30.000 EA 100.000 EA 10.000 EA 10.000 nos 30.000 EA 30.000 EA 30.000 nos 30.000 EA 30.000 Sec06.1
1. Turning Insert (CNMG 120408-NM4Wpp20) EQUIVALENT GRADES ARE AS FOLLOWS: CNMG 120408 NM4 WPP20 (WALTER MAKE) CNMG 120408 EN NM26 HCN2125 (WNT MAKE) CNMG 120408 GRNC5330 (KLOY MAKE) 2. Parting Blade (XLCFN 2603J31-FX)3.1mm EQUIVALENT GRADES ARE AS FOLLOWS: XLCFN2603J31-FX (WALTER MAKE) SPB326 (KLOY MAKE) 3. Turning Insert DNMG 150612 NM9 WAP 30 EQUIVALENT GRADES ARE AS FOLLOWS: Section VII: Technical Specifications DNMG 150612 NM9 WPP20 DNMG 150612 NM9 WAP30 (WALTER MAKE) DNMG 150612 EN-NM26 HCN2125 (WNT MAKE) DNMG 150612 B25NC5330 (KLOY MAKE) 4. Inserts Carbide CCMT 09T308 EQUIVALENT GRADES ARE AS FOLLOWS: CCMT 09T308 PF4 WPP20 (WALTER MAKE) CCMT 09T308 EN PF26 HCN2125 (WNT MAKE) CCMT 09T308 VFNC5330 (KLOY MAKE) 5. TC Insert (FX 3.1 No. 15-M1 WTA33) EQUIVALENT GRADES ARE AS FOLLOWS: FX3.1-E310 N015 CE4WSP43 FX3.1-E310 N015 WTA33 (WALTER MAKE) SXE3.00N0.20-MICCN1340 (WNT MAKE) SP300 NC5330 (KLOY MAKE) 6. Turning Inserts VBMT 160404-PS5 WPP20 EQUIVALENT GRADES ARE AS FOLLOWS: Sec07.1
VBMT 160404 PS5 WPP20 (WALTER MAKE) VBMT 160404 EN-PF26 HCN2125 (WNT MAKE) VBMT 160404 VFNC5330 (KLOY MAKE) 7. Turning Insert CCGW 09T308-2MC PBC40S EQUIVALENT GRADES ARE AS FOLLOWS: CCMW 09T308 WCB50(WALTER MAKE) CCGW 09T308-2MC PBC40S(WNT MAKE) CCGW 09T308 DNC350(KLOY MAKE) 8. TC Turning Insert (CNMA 120412 WCB50) Suitable for holder PCLNR2525M12 (existing) Make : WALTER or equivalent HSN Code : 82090090 9. Insert CCMT 120408-PM5 WPP20 or equivalent suitable for our existing holder A32T-SCLCR12 Make : Korloy or equivalent HSN Code : 82090010 10. Inserts Carbide CCMT 09T308-PF4 WPP10 or equivalent suitable for our existing holder A25T-SCLCR09 Make : Korloy or equivalent HSN Code : 82090010 11. Insert CNMG120408-NM9 WPP20 or equivalent suitable for our existing holder PCLNR2525M12 Make : Korloy or equivalent HSN Code : 82090010 12. Insert DNMG110408-NM9 WPP20 or equivalent suitable for our existing holder DDNNN2525M11 Make : Korloy or equivalent HSN Code : 82090010 13. Inserts Carbide CCMT09T308-PM5 WPP20 or equivalent suitable for our existing holder A25SCLCR09 Make : Korloy or equivalent HSN Code : 82090010 Sec07.2
Section VIII: Quality Control Requirements Quality of Turning Inserts & Parting Blades : Free from all technical defects, in compliance with our Technical Specification given in SECTION VII. i) Goods supplied not in conformity with tender specification will be treated as goods not supplied at all and supplier shall take supplied material not confirming to order specification back within 15 days. Goods shall be delivered by the supplier in accordance with the terms and conditions specified in the contract failing which expenses of keeping goods at purchaser's premises may be levied on supplier. ii) Delivery date will be calculated from the date goods are received in acceptable quality in accordance with technical specification. Sec08.1
To, India Government Mint, Kolkata A Unit of Security Printing & Minting Corporation of India Limited (Wholly Owned by Govt. of India) Kolkata Section X: Tender Form Date: Ref: Your Tender document No.6000011756 /DIEDEPT.&GWS dated 19.12.2018 We, the undersigned have examined the above mentioned tender enquiry document, including amendment No..., dated... (if any), the receipt of which is hereby confirmed. We now offer to supply and deliver... (Description of goods and services) in conformity with your above referred document for the sum of (total tender amount in figures and words), as shown in the price schedule(s), attached herewith and made part of this tender. If our tender is accepted, we undertake to supply the goods and perform the services as mentioned above, in accordance with the delivery schedule specified in the List of Requirements. We further confirm that, if our tender is accepted, we shall provide you with a performance security of required amount in an acceptable form in terms of GCC clause 6, read with modification, if any, in Section V - 'Special Conditions of Contract', for due performance of the contract. We agree to keep our tender valid for acceptance for a period up to..., as required in the GIT clause 19, read with modification, if any in Section-III - 'Special Instructions to Tenderers' or for subsequently extended period, if any, agreed to by us. We also accordingly confirm to abide by this tender up to the aforesaid period and this tender may be accepted any time before the expiry of the aforesaid period. We further confirm that, until a formal contract is executed, this tender read with your written acceptance thereof within the aforesaid period shall constitute a binding contract between us. We further understand that you are not bound to accept the lowest or any tender you may receive against your above-referred tender enquiry.... (Signature with date)... (Name and designation) Duly authorized to sign tender for and on behalf of...... Sec10.1
1. Turning Insert (CNMG 120408-NM4Wpp20) 2. Parting Blade (XLCFN 2603J31-FX)3.1mm 3. Turning Insert DNMG 150612 NM9 WAP 30 4. Inserts Carbide CCMT 09T308 5. TC Insert (FX 3.1 No. 15-M1 WTA33) 6. Turning Inserts VBMT 160404-PS5 WPP20 7. Turning Insert CCGW 09T308-2MC PBC40S 8. TC Turning Insert (CNMA 120412 WCB50) Section XI: Price Schedule 9. Insert CCMT 120408-PM5 WPP20 or equivalent suitable for our existing holder A32T-SCLCR12 Sec11.1
10. Inserts Carbide CCMT 09T308-PF4 WPP10 or equivalent suitable for our existing holder A25T-SCLCR09 11. Insert CNMG120408-NM9 WPP20 or equivalent suitable for our existing holder PCLNR2525M12 12. Insert DNMG110408-NM9 WPP20 or equivalent suitable for our existing holder DDNNN2525M11 13. Inserts Carbide CCMT09T308-PM5 WPP20 or equivalent suitable for our existing holder A25SCLCR09 Grand Grand Total Price in Words :... Signature of the tenderer with designation with seal Sec11.2
Section XII: Questionnaire The tenderer should furnish specific answers to all the questions / issues mentioned below. In case a question / issue does not apply to a tenderer, the same should be answered with the remark "not applicable". Wherever necessary and applicable, the tenderer shall enclose certified copy as documentary proof / evidence to substantiate the corresponding statement. In case a tenderer furnishes a wrong or evasive answer against any of the under mentioned question/ issues, its tender will be liable to be ignored. 1. Brief description and of goods and services offered: 2. Offer is valid for acceptance up to... 3. Your permanent Income Tax A/ C No. as allotted by the Income Tax Authority of Government of India: Please attach certified copy of your latest/ current Income Tax clearance certificate issued by the above authority. 4. Status : a) Are you currently registered with the Directorate General of Supplies & Disposals (DGS&D), New Delhi, and / or the National Small Industries Corporation (NSIC), New Delhi, and / or the present SPMCIL and / or the Directorate of Industries of the concerned State Government for the goods quoted? If so, indicate the date up to which you are registered and whether there is any monetary limit imposed on your registration. b) Are you currently registered under the Indian Companies Act, 1956 or any other similar Act? Please attach certified copy(s) of your registration status etc. in case your answer(s) to above queries is in affirmative. 5. Please indicate name & full address of your Banker(s) : 6. Please state whether business dealings with you currently stand suspended/ banned by any Ministry/ Deptt. of Government of India or by any State Govt.... (Signature with date)...... (Full name, designation & address of the Person duly authorized sign on behalf of the tenderer) For and on behalf of...... (Name, address and stamp of the tendering firm) Sec12.1
Section XIV: Manufacturer's Authorization FM To, India Government Mint, Kolkata A Unit of Security Printing & Minting Corporation of India Limited (Wholly Owned by Govt. of India) Kolkata Dear Sirs, Ref.: Your Tender document No... dated... We... who are proven and reputable manufacturers of... (name and description of the goods offered in the tender) having factories at... here by authorize Messrs... (name and address of the agent) to submit a tender, process the same further and enter into a contract with you against your requirement as contained in the above referred tender enquiry documents for the above goods manufactured by us. We further confirm that no supplier or firm or individual other than Messrs... (name and address of the above agent) is authorized to submit a tender, process the same further and enter into a contract with you against your requirement as contained in the above referred tender enquiry documents for the above goods manufactured by us. We also hereby extend our full warranty, as applicable as per clause 16 of the General Conditions of Contract read with modification, if any, in the Special Conditions of Contract for the goods and services offered for supply by the above firm against this tender document. Yours faithfully,...... [Signature with date, name and designation] Note: This letter of authorization should be on the letter head of the manufacturing firm and should be signed by a person competent and having the power of attorney to legally bind the manufacturer. Sec14.1
Section XVI: Contract Form Contract No...dated... This is in continuation to this office' Notification of Award No... dated... 1. Name & address of the Supplier:... 2. SPMCIL's Tender document No... dated...and subsequent Amendment No... dated... (If any), issued by SPMCIL 3. Supplier's Tender No... dated...and subsequent communication(s) No... dated... (If any), exchanged between the supplier and SPMCIL in connection with this tender. 4. In addition to this Contract Form, the following documents etc, which are included in the documents mentioned under paragraphs 2 and 3 above, shall also be deemed to form and be read and construed as part of this contract: (i) General Conditions of Contract; (ii) Special Conditions of Contract; (iii) List of Requirements; (iv) Technical Specifications; (v) Quality Control Requirements; (vi) Tender Form furnished by the supplier; (vii) Price Schedule(s) furnished by the supplier in its tender; (viii) Manufacturers' Authorization Form (if applicable for this tender); (ix) SPMCIL's Notification of Award Note: The words and expressions used in this contract shall have the same meanings as are respectively assigned to them in the conditions of contract referred to above. Further, the definitions and abbreviations incorporated under clause 0 of Section - V - 'General Conditions of Contract' of SPMCIL's Tender document shall also apply to this contract. 5. Some terms, conditions, stipulations etc. out of the above-referred documents are reproduced below for ready reference: (i) Brief particulars of the goods and services which shall be supplied/provided by the supplier are as under: (ii) Delivery schedule (iii) Details of Performance Security (iv) Quality Control (a) Mode(s), stage(s) and place(s) of conducting inspections and tests. (b) Designation and address of SPMCIL's inspecting officer (v) Destination and dispatch instructions (vi) Consignee, including port consignee, if any (vii) Warranty clause (viii) Payment terms (ix) Paying authority... (Signature, name and address of SPMCIL's authorized official) For and on behalf of... Received and accepted this contract... (Signature, name and address of the supplier's executive duly authorized to sign on behalf of the supplier) For and on behalf of... (Name and address of the supplier)... (Seal of the supplier) Date: Place: Sec16.1
Section XVII: Letter of authority for attending a Bid opening The General Manger, India Government Mint, Kolkata. Subject: Authorization for attending bid opening on 29.01.2019 in the Tender of PROCUREMENT OF TURNING INSERTS & PARTING INSERTS. Following persons are hereby authorized to attend the bid opening for the tender mentioned above on behalf of (Bidder) in order of preference given below. Order of Preference Name Specimen Signatures 1. 1. Alternate representative Signatures of bidder or Officer authorized to sign the bid Documents on behalf of the bidder. Note: 1. Maximum of two representatives will be permitted to attend bid opening. In cases where it is restricted to one, first preference will be allowed. Alternate representative will be permitted when regular representatives are not able to attend. 2. Permission for entry to the hall where bids are opened may be refused in case authorization as prescribed above is not recovered. Sec17.1
Section XIX: Proforma of Bills for Payments (Refer to Clause 22.6 of GCC) Name and Address of the Firm... Bill No...Dated... Purchase order...no...dated... Name and address of the consignee... S.No Authority for Purchase Description of Stores No.or qty. Rate P. Rs. Price per Rs. P Amount TOTAL 1. C.S.T./Sales Tax Amount 2. Freight (if applicable) 3. Excise Duty (if applicable) 4. Packing and Forwarding charges (if applicable) 5. Others (Please specify) 6. PVC Amount (with calculation sheet enclosed) 7. (-) deduction/discount 8. Net amount payable (in words Rs.) Despatch detail RR No. other proof of despatch... Dated...(enclosed) Inspection Certificate No...Dated...(enclosed) Income Tax Clearance Certificate No...Dated...(enclosed) Modvat Certificate No...(enclosed) Excise Duty Gate pass...(enclosed) Sec19.1
Place and Date Received Rs...(Rupees)... I hereby certify that the payment being claimed is strictly in terms of the contract and all the obligations on the part of the supplier for claiming that payment has been fulfilled as required under the contract. Revenue stamp Signature and of Stamp Supplier Sec19.2