IEC/EN Clause 1 Scope 1) LED 2) LED LED. TÜV SÜD Group. TEC_EEC_ELP 18 May

Similar documents
INTERNATIONAL STANDARD

INTERNATIONAL STANDARD

TEST REPORT IEC : 2005 (2nd Edition) and/or EN :2006 Information technology equipment Safety Part 1: General requirements

IEC : 3 rd Edition with Amendment 1 (2012) Michael Howell, P.E., UL LLC

PHASED OUT. LED light engine / OLED LED linear / area. Module CLE Shallow G1 ADV Modules CLE

LED light engines LED compact. Module CLE G3 ADV Modules CLE ADVANCED

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

38 Lucerna - LED 01E LED_AU_Lucerna.indd 38 27/12/16 10:39

NORTHERN IRELAND ELECTRICITY SAFETY RULES GUIDANCE DOCUMENT INSTRUCTION FOR OPERATIONS OR WORK ON THE PREMISES

Test Report. File No.: SHV11085/16-01 Test Report No.:

Schedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK

PRODUCT SPECIFICATION October 2012 KMT 0 NG LHS / NGJ LHS KMT 0 NGJ LHS ULC

Elevator and escalator electrical equipment CSA B / ASME A

Ref No: N Date: May 25, 2005

RW-175 and RW-175-E SLEEVING

NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (Act 5 of 2008) AMENDMENTS TO THE COMPULSORY SPECIFICATION FOR CIRCUIT -BREAKERS (VC 8036)

LEVELTEC ENGINEERING PTY LTD

UTS. UTS : Your first choice in waterproof connectors! Description. IP68/IP69K - Plastic connector

Annex 4 referred to in Chapter 6 Sectoral Annex in relation to Article 61. Sectoral Annex on Electrical Products. Part 1 Scope and Coverage

(Non-legislative acts) DECISIONS

Basic Characteristics Data

HVL Tests on a 0,6/1 kv LV cable, 4x300 mm 2, Al/XLPE/PVC

SCOPE OF ACCREDITATION

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017

No.R.69 3 February 2012

Formal Interpretations/ Interprétation formelle

An Urgent Bulletin from CSA Group

Basic Characteristics Data

Technical Committee on Electrical Equipment of Industrial Machinery (EEI-AAA)

Test Protocol. UN Transportation Test

Solar Isolator Range. Bright solutions

Excerpts from 2011 City of Los Angeles Electrical Code and 2010 California Electrical Code (Based on 2008 National Electrical Code)

Electricity (Consumer Safety) Regulation 2006

IECEE PUBLICATIONS IECEE IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System)

Insulation Life Subcommittee - Unapproved Meeting Minutes November 2, 2011 Boston, MA

A2LA. P111 Technical Consensus Decisions from the Electromagnetic Advisory Committee (EMAC)

2009 Bill 50. Second Session, 27th Legislature, 58 Elizabeth II THE LEGISLATIVE ASSEMBLY OF ALBERTA BILL 50 ELECTRIC STATUTES AMENDMENT ACT, 2009

ISO INTERNATIONAL STANDARD. Footwear Test methods for uppers Water resistance. Chaussures Méthodes d'essai des tiges Résistance à l'eau

ISO INTERNATIONAL STANDARD. Footwear Test methods for uppers Tensile strength and elongation

Technical Committee on Electrical Equipment of Industrial Machinery (EEI-AAA)

Habiaflame. Fire resisting wires and custom design cables

SUBJECT: NFPA 70 Second Draft TC Ballot Final Results (A2016)

TEST REPORT REPORT NO.: KTP-15FE0016VNTY-A1. MODEL NO.: Refer to model list. RECEIVED: Feb. 04, ISSUED: May. 13, 2015

Kit Potentiometer Rotational Analog Displacement Sensor

CAPILLARY DIAL THERMOMETERS TYPE TXC

MATERIAL AND EQUIPMENT STANDARD FOR HOOKS, SHACKLES, EYE BOLTS AND CHAINS FIRST EDITION FEBRUARY 2005

Annex I To Loughborough University Estates Services Health and Safety Policy

Electricity Act, 1998 Loi de 1998 sur l électricité

INDUSTRIAL SWITCHGEAR

Eurocode: Basis of structural design

IECEE PUBLICATION IECEE 01-S. IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System)

Dry Type Transformers Subcommittee Unapproved Meeting Minutes March 14, 2007 Dallas, Texas

IRS 1. Internal Rules of Standardization

DECLARATION OF PERFORMANCE

Dry Type Transformers Subcommittee Unapproved Meeting Minutes March 22, 2006 Costa Mesa, California

HOT WORK 1. PURPOSE 2. SCOPE 3. KEY TERMS

Other variations which are not mentioned in this document are on demand (if possible).

B-Series Section Overview. Ball Screw Cutaway. UNI-LIFT Ball Screw Actuators provide high. 34

OPEI Operating Procedures for ANSI Accredited U.S. TAGs to ISO TC 23 SC 13 and SC 17

Data sheet: Wilo-CronoNorm-NL 80/200-3/4

6 Disagree (Drobnick, Dyson, Eblen, Gray, Mohla)

TENDER FOR THE SUPPLY AND DELIVERY OF SELF-PROPELLED SCISSOR LIFT TO BATANG AI POWER STATION TENDER DOCUMENTS: SARAWAK ENERGY REF. NO.

SOUTH AFRICAN NATIONAL STANDARD

2 to 5 Serial Cell Li-Ion / Li-Polymer Battery Protection IC for Secondary Protection

National Regulator for Compulsory Specifications Act (Act 5 of 2008) hereby

M-Series, Actuator Overview. Machine Screw Cutaway. UNI-LIFT Machine Screw Actuators offer precise. 12

IEC/IEEE Dual Logo Agreement Joint Development. Jodi Haasz International Affairs Senior Manager 6 November 2017

PRODUCT SPECIFICATION

M E M O R A N D U M. NFPA 99 Second Draft Technical Committee FINAL Ballot Results (A2017 Cycle)

ROHACELL WF (dry condition) can be processed up to temperature of 130 C (266 F) and maximum pressure up to 0,7 MPa (100 PSI).

Schedule of Accreditation Issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

CABLE FIXING CLAMPS FOR HIGH VOLTAGE CABLE SYSTEMS

ALUMINIUM ROLLERS MADE IN ITALY

CENTRAL MARKS DEPARTMENT- 3. Our Ref: CMD-3/16: Subject: Implementation of Amendment 2 to IS (Part 1):2010

MAHARASHTRA STATE ELEC. DISTRIBUTION CO. LTD, VASHI CIRCLE

Ordinance on electrical low-voltage equipment

Environmental Protection Act Loi sur la protection de l environnement

2010/SCSC/WKSP1/004 APEC Toy Safety Initiative: Survey Results

MEMORANDUM. SUBJECT: NFPA 70E Proposed Tentative Interim Amendment (TIA) No. 1253R

Surface-mounted downlights for metal halide lamps and LEDs

Formal Interpretations/ Interprétation formelle

LDP35CA. Transient protection load dump. Features. Description. Lead-free package High surge capability: 15 A / 40 ms

132 ABRIDGED FINAL REPORT OF THE SIXTIETH SESSION OF THE EXECUTIVE COUNCIL

Electricity (Safety, Quality and Continuity) Regulation

EN Official Journal of the European Union. (Acts whose publication is not obligatory) COMMISSION COMMISSION DECISION. of 26 November 2003

Inductive proximity sensors basic series

Medical technology Main catalog. Medicalline Medical industry connectors

ARTICLE VI - RAILROADS SECTION 4-602: OBSTRUCTING VIEW AT CROSSINGS PROHIBITED

MAAG TM PPU gear unit for roller presses, horizontal mills and kilns

Sensyflow P. Thermal air-mass flowmeter for test rigs and quality assurance 10/ EN. Function and System Design

Ministerial Regulation

Full Automatic Mounting Press

Chapter Five: Forces. Ø 5.1 Forces. Ø 5.2 Friction. Ø 5.3 Forces and Equilibrium

MINUTES OF MEETING BUSHING SUBCOMMITTEE OF THE IEEE/PES TRANSFORMER COMMITTEE Nashville, TN March 14, 2012

The Safety of Employees (Electricity) Ordinance, 1956.

Issuing Authority. The supply of material shall be governed by Form-B of UPPCL alongwith following special conditions:-

D.T.D Ministry of Defence Defence Procurement Agency, ADRP2 Abbey Wood Bristol BS34 8JH OBSOLESCENCE NOTICE

Proposal for a COUNCIL DECISION

Dry Type Transformers Subcommittee Unapproved Meeting Minutes October 17, 2007 Minneapolis, Minnesota

QUESTION / CLARIFICATION

Transcription:

- 1) LED 250V - - 1000V, 50Hz 60Hz ; - 2) LED LED - Clause 1 Scope TEC_EEC_ELP 18 May 2010 2

Clause 2 Normative reference 1) - 2) - TEC_EEC_ELP 18 May 2010 3

Clause 3 Terms and definitions 1) SELV IEC SELV 61558-1 2) LED( SELV-equivalent ) SELV ( 1 IEC 61347-2-13 8.1 8.2.) 3) LED, LED LED ( - 4) - - TEC_EEC_ELP 18 May 2010 4

Clause 4 General requirement 1) IEC/EN 60598-1 2) IEC/EN 60598-1 3) SELV I Annex 4) LED 2 2 TEC_EEC_ELP 18 May 2010 5

Clause 5 General note on tests 1) 2) - (10-30 ); - TEC_EEC_ELP 18 May 2010 6

- Independent ( ) - Integral ( ) Clause 6 Classification 1) - SELV-equivalent or isolating controlgear ( - Auto-wound controlgear ( IEC 61558-2-13 auto-transformer - Independent SELV controlgear ( 2) - Built-in ) TEC_EEC_ELP 18 May 2010 7

Clause 7 Marking - 1) ; - - ; - ; - ( - ( ); - - ( ( ; ); - - tc ; ; - - ; - ; LED TEC_EEC_ELP 18 May 2010 8

2) : Clause 7 Marking - ; - - ; - ; - - ; TEC_EEC_ELP 18 May 2010 9

Clause 8 Protection against accidental contact with live part - 1) (IEC 61347-1 Annex A) 0.7mA, 2mA - 4 IEC 60990 figure - 34V k 50 TEC_EEC_ELP 18 May 2010 10

Clause 8 Protection against accidental contact with live part F 1 ( 2) 0.5 ) 50V 3) SELV IEC 60065-4) SELV SELV : - 25V r.m.s. 33V r.m.s V 33 SELV SELV IEC 60364-4-41 6) Y 5) 25V IEC60384-14 1 Y1 2 Y2 2 Y2 TEC_EEC_ELP 18 May 2010 11

Clause 9 Terminals 1) IEC 60598-1 14 2) IEC 60598-1 15 TEC_EEC_ELP 18 May 2010 12

Clause 10 Provisions for protective earthing - 9 1) - 2) LED - 3) 1 4) PCB PCB 25A TEC_EEC_ELP 18 May 2010 13

Clause 11 Moisture resistance and insulation - 1) - 20-30 91%-95% 48-2) - / 2M, 4M TEC_EEC_ELP 18 May 2010 14

Clause 12 Electric strength - 1) 2) SELV IEC 60065 14.3.2 TEC_EEC_ELP 18 May 2010 15

LED Clause 13 Thermal endurance test for winding of ballasts TEC_EEC_ELP 18 May 2010 16

Clause 14 Fault conditions 1) 0.9-1.1 - tc 2) - ISO4046-4 4.187 - IEC 3) - - / - - A 4) Annex TEC_EEC_ELP 18 May 2010 17

1) tc - F Annex 0.9-1.1 tc - - tc 0.9-1.1 +0/-5-3 2) IEC 60065 Table 35 3 35 IEC 60065 Table Clause 15 Transformer heating TEC_EEC_ELP 18 May 2010 18

1) 0.9-1.1 20cm 200cm 1 - - LED LED - - - 2) - Clause 16 Abnormal conditions TEC_EEC_ELP 18 May 2010 19

Clause 17 Construction 1) / / 2) 3) IEC 60083 IEC 60906 / TEC_EEC_ELP 18 May 2010 20

Clause 18 Creepage distances and clearances 1), IEC 61347-1 TEC_EEC_ELP 18 May 2010 21

3) SELV Annex I. Clause 18 Creepage distances and clearances 2) EN 61347-1 TEC_EEC_ELP 18 May 2010 22

Clause 19 Screw, current-carrying parts and connections 1) IEC - 60598-1 4.11 4.12 - - - - - - - 50 - - - TEC_EEC_ELP 18 May 2010 23

Clause 19 Screw, current-carrying parts and connections 2) TEC_EEC_ELP 18 May 2010 24

Clause 20 Resistance to heat, fire and tracking - 1) - 25 ; 125 75-2) 650 30 IEC 60695-2-10 TEC_EEC_ELP 18 May 2010 25

Clause 20 Resistance to heat, fire and tracking - 3) IEC 60695-11-5 10-4) 175V TEC_EEC_ELP 18 May 2010 26

Clause 21 Resistances to corrosion 1) - TEC_EEC_ELP 18 May 2010 27

Annex I - 25A III SELV 1) General - 2) Definitions - - - - - 3) Classification - / : Class I; Class II; / TEC_EEC_ELP 18 May 2010 28

Annex I - 4) Marking : - 5) Protection against electric shock - / 0.4mm, TEC_EEC_ELP 18 May 2010 29

Annex I - ta 6) Heating - ; - 1.06 ; - 7) Short-circuit and overload protection - 0.94-1.06 / ; - TEC_EEC_ELP 18 May 2010 30

Annex I 8) Insulation resistance and electric strength ( TEC_EEC_ELP 18 May 2010 31

Annex I - 9) Construction 25mm. - / / 10) Components / IEC 60083 IEC 60906-1.06 48-11) Creepage distance and clearances IEC 61347-1 Table 3 IEC 61347-2-13 Annex I Table I.7, IEC 60598-1 TEC_EEC_ELP 18 May 2010 32

CTL OSM CTL/OSM number CTL 005/07 CTL PDSH 0748 CTL 570/06 CTL 571/06 CTL 573/06 CTL 574/06 CTL 575/06 226.03.OSM Topics Luminaire provided with LEDs Portable luminaire or lighting chain Sample selection (family product) Marking according to the safety requirements Short circuit across creepage distances and clearances Ballast with double or reinforced insulation Test to establish whether a conductive part is a live part which may cause an electric shock Mandatory markings http://www.iecee.org/ctl/sheet/html/ctl_decisions_index.htm http://www.iecee.org/ctl/osm_decisions.htm TEC_EEC_ELP 18 May 2010 33