Chapter Five: Forces. Ø 5.1 Forces. Ø 5.2 Friction. Ø 5.3 Forces and Equilibrium

Similar documents
Chapter Seven: Energy

Microseminar 1. Focus on Operation / Packing and Lashing

Uncertainty in Measurements

Sample Curriculum Map Instructional Strategies Assessment Projects/Other

B-Series Section Overview. Ball Screw Cutaway. UNI-LIFT Ball Screw Actuators provide high. 34

Uniform Laws and Regulations

Overview. Ø Neural Networks are considered black-box models Ø They are complex and do not provide much insight into variable relationships

M-Series, Actuator Overview. Machine Screw Cutaway. UNI-LIFT Machine Screw Actuators offer precise. 12

ALUMINIUM ROLLERS MADE IN ITALY

The Cultural Landscape by Rubenstein Chapter 3: Migration

Key Issue 1: Where Are Migrants Distributed?

Public Affairs 856 Trade, Competition, and Governance in a Global Economy Lecture 22 4/10/2017. Instructor: Prof. Menzie Chinn UW Madison Spring 2017

Public Affairs 856 Trade, Competition, and Governance in a Global Economy Lecture 23 4/18/2018. Instructor: Prof. Menzie Chinn UW Madison Spring 2018

DrillScene Presentation for Finding Petroleum Drilling and the Digital Oilfield Aberdeen 08 May 2012 COPYRIGHT 2011 SEKAL AS. ALL RIGHTS RESERVED

DEPARTMENT OF TRANSPORTATION. National Highway Traffic Safety Administration. 49 CFR Part 571. Docket No. NHTSA RIN 2127-AK17

ROUNDO Section Bending Machines Type R-1 through R-21-S

Congratulations! A space has been reserved for you at the Odyssey Teams, Inc. Ropes Course. Be sure to come prepared by reading the following:

Learning Expectations

Historic Migration Customized Project

TECHNOLOGY FOR THE WELDER S WORLD. MIG/MAG CATALOG 4.1. MIG/MAG Welding Technology for all Metalworking Industries.

Learning Expectations

Chapter 4 Specific Factors and Income Distribution

teckentrup-sperrkant The Original

Trocar Systems. Complete and efficient. Trocar systems

Notes on exam in International Economics, 16 January, Answer the following five questions in a short and concise fashion: (5 points each)

CEF POLYMERES. Spring. CEF POLYMERES sa.com DT.STRA.E l Fv F1 F. Strocke (S)

Design of Below-the-Hook Lifting Devices

Midterm Exam Economics 181 PLEASE SHOW YOUR WORK! PUT YOUR NAME AND TA s NAME ON ALL PAGES 100 Points Total

MARK SCHEME for the October/November 2014 series 0460 GEOGRAPHY. 0460/42 Paper 4 (Alternative to Coursework), maximum raw mark 60

MAAG TM PPU gear unit for roller presses, horizontal mills and kilns

POLISHING MATERIALS. z Introduction 380. z Polishing wheels 380. z Finimaster wheels 384. z Felt discs 385. z Compound sponges 388.

Key Issue 1: Where Are Migrants Distributed?

Can We Reduce Unskilled Labor Shortage by Expanding the Unskilled Immigrant Quota? Akira Shimada Faculty of Economics, Nagasaki University

Support Vector Machines

teckentrup-sperrkant The Original

Optimizing Rod Lift in High Water Cut Resource Plays: A Divide County North Dakota Three Forks Case Study

CHAPTER 11. Key Concept. Throwing. Development of Fundamental Movement: Manipulation Skills. A critical skill that is used in many sports.

Faymonville Mega- Z- 4H- V- AT- A (2.74) Details. Mega-Z-4H-V-AT-A (2.74)

Trials and Tribulations of Shooting a Water Well. by Wes Bender

Metal Bellows Couplings Servo-Insert Couplings Line Shafts

1. GEOGRAPHIC ANALYSIS OF POPULATION Population & Migration

PATENT ACTIVITY AT THE IP5 OFFICES

PREPARING TO DO THE MATH

PUBLIC CHAPTER NO. 231 SENATE BILL NO By Kyle, Harper, Henry, Haynes, Marrero, Johnson. Substituted for: House Bill No.

Chapter 10 TRIALS, ARBITRATION, & MEDIATION

Machine volt/hz Watt r.p.m. kg Plug R ref. ES / EU

Urethane Parts Failure Mode Determination, Problem Analysis and Resolution

4. Briefly describe role of each of the following in examining intervening obstacles and migration: a) physical geography

DETENTION UTILIZATION STUDY PINELLAS COUNTY JUNE Office of Research and Data Integrity Florida Department of Juvenile Justice

Geography of Migration. By David Lanegran Ph.D. Macalester College

International trade in the global economy. 60 hours II Semester. Luca Salvatici

Design of Below-the-Hook Lifting Devices

Immigration and the Demographics of the United States

Chapter 3 Learning Guide Migration. 3. Migration may be classified as either international or internal. What is the difference?

centrotex / captex / mandotex

CHAPTER 1 HEAT CHAPTER 2 LIGHT

Circuit Court, D. Massachusetts. March 2, 1883.

International Trade Theory College of International Studies University of Tsukuba Hisahiro Naito

January 2018 Special Preview Edition

33 CFR PART 329 DEFINITION OF NAVIGABLE WATERS OF THE UNITED STATES. Authority: 33 U.S.C. 401 et seq.

Essential Questions Content Skills Assessments Standards/PIs. Identify prime and composite numbers, GCF, and prime factorization.

v.43f, no.8-34 Circuit Court, N. D. Illinois. February 10, CONSOLIDATED ROLLER-MILL CO. V. BARNARD & LEAS MANUF'G CO.

Standard pumps. Dimensions, weights Wilo-CronoLine-IL

Working Paper: The Effect of Electronic Voting Machines on Change in Support for Bush in the 2004 Florida Elections

Mazak Quick Turn Smart 300, 350 M Toolholder Program

SMART MOTION C A T A L O G 2009:1

A. Panama B. Canada C. India D. Cameroon

World trade interdependencies: a New Zealand perspective

Independent Clauses vs. Dependent Clauses

Case 2:18-cv GW-MAA Document 1 Filed 10/25/18 Page 1 of 23 Page ID #:1

ECONOMY OF SIBIU COUNTY. RESOURCES FOR A FUTURE DEVELOPMENT.

How s Life in Canada?

Computational Inelasticity FHLN05. Assignment A non-linear elasto-plastic problem

THE TAMIL NADU LIFTS RULES, (G.o.Ms.No.173, Energy (B1), 3rd November 1997)

Unit 3: Migration and Urbanization (Lessons 5-7)

bulletin 139 Youth justice in Australia Summary Bulletin 139 MArch 2017

Dorling, D. (2017) The Election Result in Three Graphs, Public Sector Focus, July/August, pp.66-67,

Chapter. Describing the Relation between Two Variables Pearson Pren-ce Hall. All rights reserved

GG105: Review Sheet Final Exam Tuesday, December 12 th 12-2pm

RENOVATION, MODERNIZATION AND UPRATING OF SMALL HYDRO-POWER STATIONS

VoteCastr methodology

PATENT ACTIVITY AT THE IP5 OFFICES

Clarification Questions and Answers

PHASED OUT. LED light engine / OLED LED linear / area. Module CLE Shallow G1 ADV Modules CLE

2013 No POSTAL SERVICES. The Postal Services (Universal Postal Service) (Amendment) Order 2013

ECONOMIC GROWTH* Chapt er. Key Concepts

Access for people with disabilities to the upper floor of a two storey warehouse and office building at 4 Daly Street, Lower Hutt

Chapter 4: Specific Factors and

Kingsclere Parish Council BYELAWS FOR PLEASURE GROUNDS, PUBLIC WALKS, AND OPEN SPACES

Chapter 1: Number Concepts

TORTS 1 MID-TERM EXAM MODEL ANSWER (FALL 2006) I. General Comments:

Lecture 1. Introduction

Poverty and Inequality

Hoboken Public Schools. Environmental Science Honors Curriculum

GRAVITY AND THE HUMAN MIGRATION

Social Science and History: How Predictable is Political Behavior?

STANDARDS OF WEIGHTS AND MEASURES (PACKAGED COMMODITIES) AMENDMENT RULES, 2006

PATENT ACTIVITY AT THE IP5 OFFICES

Population Pressures. Analyzing Global Population, Migration Patterns and Trends

Date May 31, 2017 Court Tokyo District Court, Case number 2016 (Wa) 7763

Transcription:

Chapter Five: Forces Ø 5.1 Forces Ø 5.2 Friction Ø 5.3 Forces and Equilibrium

5.1 The cause of forces Ø A force is a push or pull, or an action that has the ability to change motion. Ø Forces can increase or decrease the speed of a moving object. Ø Forces can also change the direction in which an object is moving.

5.1 How are forces created? Ø Forces are created in many ways. Ø For example, your muscles create force when you swing a baseball bat.

Four Elemental Forces Ø All forces in the universe come from only four basic forces. Ø Electromagnetic forces are important to technology. Ø Gravity is a universal force.

5.1 Units of force Ø The pound is a unit of force commonly used in the United States. Ø For smaller amounts, pounds are divided into ounces (oz.). Ø There are 16 ounces in 1 pound.

5.1 Pounds Ø When you measure weight in pounds on a postal scale, you are measuring the force of gravity acting on an object.

5.1 Newtons Ø Although we use pounds all the time in our everyday life, scientists prefer to measure forces in newtons. Ø The newton (N) is a metric unit of force.

5.1 Unit conversions Ø The newton (N) is a smaller unit of force than the pound (lb). Ø If one pound of force equals 4.448 newtons, then a 100 lb person weighs 444.8 newtons.

5.1 The force vector Ø The direction of a force makes a big difference in what the force does. Ø That means force is a vector, like velocity or position. Ø Arrows are often used to show the direction of forces in diagrams.

5.1 Drawing a force vector Ø The arrow points in the direction of the force.

Drawing vectors Ø The x- and y-axes show the strength of the force in the x and y directions. Ø When drawing a force vector to show its strength, you must also choose a scale. Can you draw the x-axis vector?

5.1 How forces act Ø One way forces act is the result of direct contact. Ø A contact force is transmitted by matter directly touching other matter such as wind acting to slow a parachute.

5.1 How forces act Ø The force of gravity between Earth and Moon appears to be what people once called action-at-a-distance. Ø Today we know that the gravitational force is carried from the Earth to the Moon by a force field.

Classify these forces as contact forces or the result of force fields.

5.1 Contact forces from ropes and springs Ø Ropes and springs are often used to make and apply forces. Ø Ropes are used to transfer forces or change their direction. Ø The pulling force carried by a rope is called tension. Ø Tension always acts along the direction of the rope.

5.1 Spring forces Ø Springs are used to make or control forces. Ø The force from a spring always acts to return the spring to its resting shape. Which of these springs is designed to be stretched? Which is designed to be compressed?

5.1 Spring forces Ø The force created by a spring is proportional to the ratio of the extended or compressed length divided by the original (resting) length. Ø If you stretch a spring twice as much, it makes a force that is twice as strong.

5.1 Gravity Ø The force of gravity on an object is called weight. Ø At Earth s surface, gravity exerts a force of 9.8 N on every kilogram of mass.

5.1 Weight vs. mass Ø Weight and mass are not the same. Ø Mass is a fundamental property of matter measured in kilograms (kg). Ø Weight is a force measured in newtons (N). Ø Weight depends on mass and gravity.

Weight depends on mass and gravity A 10-kilogram rock has the same mass no matter where it is in the universe. On Earth, the10 kg. rock weighs 98 N.. On the moon, the same rock only weighs 16 N.

5.1 Calculating weight

5.1 Calculating weight Ø The weight equation can be rearranged into three forms to calculate weight, mass, or the strength of gravity.

Solving Problems Ø Calculate the weight of a 60-kilogram person (in newtons) on Earth and on Mars. 1. Looking for: Ø Ø Ø Ø weight of person in newtons on both planets Given: mass = 60 kg; g = 3.7 N/kg on Mars; implied g = 9.8 N/kg on Earth 2. Relationships: Ø W = m x g 3. Solution: Ø Ø 60 kg x 9.8 N/kg = 588 N 60 kg x 3.7 N/kg = 222 N Sig. fig. = 600 N Sig. fig. = 200 N

5.2 Friction Ø Friction is a force that resists the motion of objects or surfaces. Ø Many kinds of friction exist.

5.2 Friction

5.2 Friction and two surfaces Ø Ø Friction depends on both of the surfaces in contact. When the hockey puck slides on ice, a thin layer of water between the rubber and the ice allows the puck to slide easily.

5.2 Identifying friction forces Ø Friction is a force, measured in newtons just like any other force. Ø Static friction keeps an object at rest from moving.

5.2 Identifying friction forces Ø Sliding friction is a force that resists the motion of an object moving across a surface.

5.2 A model for friction Ø Ø Friction depends on a material s properties such as roughness, how clean the surfaces are, and other factors. The greater the force squeezing two surfaces together, the greater the friction force.

5.2 Reducing the force of friction Ø Ø Unless a force is constantly applied, friction will slow all motion to a stop eventually. It is impossible to completely get rid of friction, but it can be reduced.

5.2 Reducing the force of friction Ø Ø The friction between a shaft (the long pole in the picture) and an outer part of a machine produces a lot of heat. Friction can be reduced by placing ball bearings between the shaft and the outer part.

5.2 Using friction Ø Ø Friction is also important to anyone driving a car. Grooved tire treads allow space for water to be channeled away from the road-tire contact point, allowing for more friction in wet conditions.

5.2 Using friction Ø Shoes are designed to increase the friction between their soles and the ground. How do you think these shoes increase friction?

5.2 Friction and energy Ø Friction changes energy of motion into heat energy.

5.2 Friction and energy Ø Friction is always present in any machine with moving parts. Ø If the machine is small, or the forces are low, the amount of heat produced by friction may also be small.

5.2 Friction and energy Ø Each time two moving surfaces touch each other, tiny bits of material are broken off by friction. Ø Breaking off bits of material uses energy.

Chapter 5.3 Learning Goals Ø Determine the net force acting on an object. Ø Define equilibrium. Ø Draw free-body diagrams to represent all forces acting on a body.

5.3 Forces and Equilibrium Ø Ø The sum of all the forces on an object is called the net force. The word net means total but also means the direction of the forces has been taken into account. In what direction will this plane go?

5.3 Adding forces Ø To figure out if or how an object will move, we look at ALL of the forces acting on it. Ø Four forces act on a plane: 1. weight 2. drag (air friction) 3. the thrust of the engines, and 4. the lift force caused by the flow of air over the wings.

When several forces act on the same object: 1. The net force is zero, or 2. The net force is NOT zero. 5.3 Equilibrium

Ø When the forces are balanced, the net force is zero. 5.3 Normal forces Ø When the net force on an object is zero, we say the object is in equilibrium.

5.3 Equilibrium and normal forces Ø Ø A normal force is created whenever an object is in contact with a surface. The normal force has equal strength to the force pressing the object into the surface, which is often the object s weight. The normal force is sometimes called the support force.

5.3 The free body diagram Ø Ø How do you keep track of many forces with different directions? Draw a free-body diagram that contains the objects, like a book on a table.

5.3 Solving equilibrium problems Ø For an object to be in equilibrium, all the forces acting on the object must add up to zero. Is this object in equilibrium?

Solving Problems Two chains are used to support a small boat weighing 1,500 newtons. One chain has a tension of 600 newtons. What is the force exerted by the other chain?

1. Looking for: Ø tension on chain 2 2. Given Ø weight boat = 1,200N; tension 1 = 600 N Ø Implied: weight and tension are forces 3. Relationships: Solving Problems Ø Net force on boat = zero

Solving Problems 4. Solution: Ø Draw free body diagram Ø Upward force of chains = weight of boat Ø 600 N + tension 2 = 1,200 N Ø tension 2 = 900 N