BHOPAL MEMORIAL HOSPITAL & RESEARCH CENTRE UNDER DEPARTMENT OF HEALTH RESEARCH, MINISTRY OF HEALTH & FAMILY WELFARE, GOVERNMENT OF INDIA Raisen Bye Pass Road, Bhopal 462038 (M.P.) Phones :- + 91 755 2742212 16, Fax :- + 91 755 2748309 Website : www.bmhrc.org LIMITED TENDER DOCUMENT ''FOR CONCLUSION OF RATE CONTRACT FOR PROCUREMENT OF PLUMBING & SANITARY CONSUMABLE ITEMS FOR A PERIOD OF ONE YEAR OR TILL THE FINALIZATION OF NEXT TENDER WHICHEVER IS LATER'' TENDER SCHEDULE & OTHER VITAL INFORMATIONS OBTAINING OF TENDER DOCUMENT FROM BMHRC : From 01-03-2018 to 21-03-2018 Pre-Bid Meeting : 12-03-2018 at 11:00 hrs. BID SUBMISSION (Last Date & Time) : 22-03-2018 upto 14:00 hrs. BID OPENING : 22-03-2018 at 15:30 hrs. TENDER DOCUMENT PRICE EMD or Bid Security Declaration (Annexure-II) Mode of Tender Submission Total page of Tender Documents : Page 01 to 19 Probable amount of item rate contract : Rs.6.00 Lacs : Tender documents can be downloaded from BMHRC website or obtained from BMHRC Engineering Services Department free of cost. : Rs.12,000/- in the form of DD or submission of Bid Security Declaration as per Annexure-II. : Two Bid System (Technical Bid + Financial Bid). 1
BHOPAL MEMORIAL HOSPITAL & RESEARCH CENTRE UNDER DEPARTMENT OF HEALTH RESEARCH, MINISTRY OF HEALTH & FAMILY WELFARE, GOVERNMENT OF INDIA Raisen Bye Pass Road, Bhopal 462038 (M.P.) Phones :- + 91 755 2742212 16, Fax :- + 91 755 2748309 The Director BMHRC invites sealed tender in Two bid (Technical & Price bid) from the Trading agencies/ distributors / dealers for Supply of Plumbing & Sanitary Consumable items for 365 days on annual rate contract basis extendable on same terms, conditions & item rates if mutually agreed between Director, BMHRC & Vendor, for further period of one year. Tender documents can be downloaded from BMHRC website or obtained from BMHRC, Engineering Services Department free of cost. The last date of submission of tender is 22-03-2018 up to 2:00 PM. Prospective bidders are requested to participate in Pre-Bid meeting scheduled on 12-03-2018 for seeking any clarifications related to the tender. For details reference our website: www.bmhrc.org 2
FORWARDING LETTER The Director, Bhopal Memorial Hospital & Research Centre, Raisen Bye Pass Road, Bhopal- 462 038 (M.P.) Dear Sir, With reference to the above Tender Enquiry I/We are submitting herewith our tender documents. The tender document is duly paginated and contains page no 01 to 19. 1. I/We, the undersigned, hereby submit my/our tender for the Registration of firm/company for the supply of Plumbing & Sanitary consumable items for 365 days on rate contract basis. 2. We are submitting Bid security declaration as per (Annexure-II) or DD No...of Rs.12,000/- dt...in favour of Director BMHRC. 3. Once the tender is decided, the performance security @ 5% of the contract value will be furnished by the undersigned (approved firm) in the form of DD in favor of Director BMHRC or Bank Guarantee from any Commercial Bank in the specified format. The contract value will be estimated on L-1 rates of Annexure III items quoted by successful bidder. 4. I/We undertake to sign the contract/ agreement, if required, within 15 (Fifteen days) from the issue of the letter of acceptance, failing which without any valid reason our/my EMD/Security deposit will may forfeited and our/my name will be removed from the list of suppliers at BMHRC, Bhopal. 5. I/We certify that I/We have gone through & agree to the terms & conditions of Tender Ref No. mentioned above and undertake to comply with them for the contract period (valid for 365 days from the date of signing of the agreement deed plus extendable for further one year on same terms, conditions & item rates if mutually agreed between vendor and Director, BMHRC). 6. I/We, the undersigned, hereby bind myself to supply the Plumbing & Sanitary consumable items to BMHRC, Bhopal during the validity period of this tender / rate-contract. 7. BMHRC is not bound to take all or any of the articles enumerated in the Annexure-III in full or given in part of the estimated quantity, as the same is indicative in nature. 3
8. I/We agree that in case of failure to supply the material for which a Purchase order placed upon me/us within the stipulated date of delivery, the institution can go to market for local purchase of the same at my/our risk and cost limited to performance security. 9. I/We will submit the samples as and when required during the finalization of contract. 10. I/We have quoted the price strictly according to the required Technical specifications/brands. The conditions contained herein shall form part of and shall be taken as if they are included in the agreement into or treated as to be entered agreement itself. 11. We shall execute an agreement on Non-judicial Stamp paper of specified denomination as per the norm in case my/our tender is accepted and if I/We asked to act so, an agreement will be executed by me/us within 15 days of the intimation of acceptance of rates for the tender. 12. BMHRC reserves the right to change any article on its being found to be of inferior quality or defective. It shall be replaced by me/us free of cost within the given time to avoid any inconvenience to the hospital. 13. Non- Blacklisting/ vigilance enquiry declaration as per Annexure-IV is hereby submitted. Yours truly, Seal & Signature of Tenderer with full address 4
BHOPAL MEMORIAL HOSPITAL & RESEARCH CENTRE UNDER DEPARTMENT OF HEALTH RESEARCH, MINISTRY OF HEALTH & FAMILY WELFARE, GOVERNMENT OF INDIA Raisen Bye Pass Road, Bhopal 462038 (M.P.) Phones :- + 91 755 2742212 16, Fax :- + 91 755 2748309 Website : www.bmhrc.org Subject: Purchase of Various Plumbing & Sanitary Consumable items. Terms & conditions: 1. The tenders should reach this office on or before 22-03-2018 up to 2:00 PM duly sealed & marked Tender number: BMHRC/ Limited Tender/ES/Civil/Material-Plumbing & Sanitary/2017-18/15 (2 nd Call). Quotations written in pencil will not be entertained. Tender (Technical Bid) will be opened on 22-03-2018 same day at 3:30 pm in the presence of bidder s representative, who decides to attend, at the time and date as specified. 2. Applicable GST to be mentioned along with the rate quoted & must include all types of taxes. No other charges will be considered. 3. Tender should invariably be submitted in two parts Viz. Part-I Technical Bid (Without Prices) in sealed envelope with EMD, Bid Security declaration & credentials and Part-II shall contain the Price Bid. The sealed envelopes of part-i & Part-II should be kept in large envelope & sealed. The tenderers are requested to submit detailed Quotation in formats mentioned in the Tender Document. THE SEALED ENVELOPE SHOULD INDICATE THEREON: I. Reference No. of the Tender: II. Tender regarding: III. Name of the firm with Address: 4. The pre-qualification documents including EMD or BID security as required in the tender document should invariably be accompanied with the technical bid otherwise tender will be rejected. 5. The bidders may download the tender documents directly from the website available at www.bmhrc.org or obtain the tender documents from BMHRC Engineering Services Dept. free of cost. 5
6. The agencies registered under make in India scheme of Govt of India would be entitled to avail relaxations as per the provisions of scheme. 7. The agencies registered under MSME/SSI are exempted from submission of tender cost & EMD prescribed in tender. 8. Offer will be valid for 90 days from the opening of the tenders. The tender rates should be kept open / valid for a period of 365 days from the date of signing the agreement. 9. If the delivery is not affected within 15 days from the date of issue of order, local purchase from other sources would be made on risk/ liability of bidder, limited to performance security. 10. Price bid shall preferably & submitted in typewritten form and hand written quotations shall be accepted at the bidders risk in case of any discrepancy in the figures the rate mentioned in words will only be considered. 11. Tender should be accompanied with Bid Security Declaration (Annexure-II) or an EMD/BID security amounting to Rs.12,000/- by way of demand draft of any commercial bank drawn in favor of Director, BMHRC, Bhopal, failing which the tender shall not be considered for acceptance and will be out rightly rejected. Cash/cheque is not acceptable at all. The EMD/BID security deposited against any other tender cannot be adjusted or considered for this tender/rate enquiry. No interest is payable on EMD/BID security. EMD/BID Security will be returned to all unsuccessful bidders after finalization of the tender. 12. The Successful bidder shall furnish the performance security within 15 days of issue of acceptance letter from BMHRC. The performance security should be for an amount of 5% of the contract value worked out from L-1 rates of required quantities of items quoted by responsive L-1 bidder payable in form of Demand Draft/Bank guarantee from any commercial Bank in favor of Director, BMHRC, and it shall be valid for the period beyond 3 months after the completion of contract period. The Performance Security shall be released on satisfactory completion of all contractual obligations. No interest shall be payable on the performance security. Failure to furnish performance security in time would entail forfeiture of earnest money deposited by the firm & cancellation of the contract. 13. The Director, BMHRC, Bhopal shall be the final authority to reject full or any part of the supply which is not conforming to the specification and other terms and conditions. 6
14. No payment shall be made for rejected material. The supplier have to remove rejected items within one week from the date of rejection at their own cost. In case these are not removed, these will be disposed off in a manner as deemed fit by the Director BMHRC at the risk and responsibility of the suppliers without any further notice. 15.In case of failure to supply the materials for which the purchase order is placed by BMHRC to the selected bidder within the stipulated date of delivery, the institute may procure the same from local market on the risk & liability of supplier agency limited to performance security. 16. The firm should not have been blacklisted in the past by any government/ Private institution and there is no Vigilance/ CBI case pending against the firm supplier. 17. The quantity of items shown in the tender can be increased or decreased depending upon the actual requirement. 18. The tenderer s must quote rates including freight, insurance, cartage, labor charges etc for supply at BMHRC Civil maintenance stores. 19. The court of BHOPAL will have the jurisdiction to trial any matter, dispute or reference between the parties arising out of the contract. It is specifically agreed that no court outside Bhopal have jurisdiction in the matter. 20.Selection will be made purely on the basis of Techno-Commercial Bid & lowest quoted rate for the items including specifications as described in the Annexure III. 21.Tender by Tele-fax/fax/e-mail will not be accepted. 22.The price charged for the Stores, under the reference by the supplier shall in no case exceed the MRP/ lowest price at which the supplier charged the Store of same identical description to any other person /organization, Institution during the period of contract. If at any time, during the said period the supplier reduces the said prices of such/stores or sales such stores to any other person/organization/institution at price lower than the chargeable to BMHRC, he shall forthwith notify such reduction in sale price to the Director, BHOPAL MEMORIAL HOSPITAL & RESEARCH CENTRE, BHOPAL and the price payable for the Stores supplied after the date of coming into force of such reduction or sale shall stand correspondingly be reduced, for the items supplied to BMHRC. 7
23.The agency / firm should be having trading experience of minimum 3 years and shall enclose self attested copy of its registration as proprietorship establishment, partnership firm or company. 24.The Vendor should enclose the copy of GST Registration No. 25. Payment to the supplier Company/agency shall be made within 60 days from the submission of the bill and receipt of stores in good & satisfactory condition. 26.The Director has full power to terminate the rate contract at any time during the period of contract without assigning any reason. 27. The Registered Office or Branch Office/Distributor of the Agency/ Trading Firm shall preferably located in the Bhopal City. 28. Force Majeure: Any failure of omission or commission to carry out the provisions of this contract by the Parties to the contract shall not give rise to any claim by any party, one against the other if such failure of omission or commission arises from events such as war, riot or an act of God making the performance of contract impracticable & impossible. Provided that notice of the occurrence of any event by either party to the other shall be given within two weeks from the date of occurrence of such event which could be attributed to Force Majeure conditions. 29. Arbitration (Dispute Settlement): i. All dispute or difference of any kind shall arise between the Purchaser and the supplier in connection with or relating to the contract, contained herein, shall be mutually discussed and settled between the parties. ii. In event of any disagreement or dispute remaining unresolved, the same shall be referred to the Director BMHRC for arbitration who will act as arbitrator or will appoint an arbitrator whose decision shall be final and binding on all parties. iii. The courts of Bhopal shall have exclusive jurisdiction in all matters arising out of this Tender. 30. Conditional tender will not be accepted. 31. The bidder shall disclose all the required information such as address, registration of firm, Proprietor, Trading experience of firm in Bio-Data sheet (Annexure-I). 8
A). General Specification of Plumbing & Sanitary items : All the Plumbing & Sanitary items supplied to BMHRC should be of standard quality durable and shall conforms to relevant BIS specifications, free from flaws and defects of any kind, items samples may be submitted to Engineering Services Department for quality compliance as & when required, during finalization of contract. B). Particular Specification of items : 1) GI Pipes Glass B. : Conforming to IS-1239(Part-1) : 2004 (sixth revision) all pipes shall be clearly finished and reasonably free from injurious defects the ends shall be free from sharp edges and burrs of pipe, the tubes shall be reasonably straight. The pipes shall withstand the pressure tests and shall not show any sign of leakage, sweating or other defects of any kind. 2) GI Tubulars Sockets & Fittings: Conforming with IS-1239(Part-2) :2011 Tubulars sockets & fittings shall be clearly finished and reasonably free from scale, surface flaws, laminations and other defects. The screw threads of tubular, sockets and fittings shall be clean and well cut. The ends shall be cut clearly and square unless otherwise specified. 3) Vitreous Sanitary Appliances: The general requirements relating to terminology, materials, manufacture, glazing defects, minimum thickness, tolerances, performance and methods tests shall conform to IS-2556 (Part 1-16) :1994-2002 as per CED-3. 4) CI Cast Spun Pipes & Fittings : Conforming with IS-8329 :2000 (Reaffirmed 2005). The CI pipes & fitting shall be of good quality, sound and free from surface or other defects, the pipes shall withstand the pressure tests and shall not show any sign of leakage, sweating or other defects of any kind. The metal used for the manufacture of pipes shall be of good quality commensurate with the mechanical requirements laid down in 10.1.1 tensile test schedule of IS-8329:2000. 5) Forged Brass Gate, Globe & Check valves for water works purpose: Conforming with IS-13114: 1991 (Reaffirmed 2003). The design of valve bodies shall be such as to provide ample resistance to distortion under maximum working pressure. All valves shall be conforming to hydrostatic pressure tests for the body and there shall be no visible leakage during the tests. Marking : Valves shall be marked with the following information either forged integral or stamped on the body and shall be clearly visible. a) Manufacture's Name of trade mark b) Nominal size c) Batch No. d) An arrow showing the direction of flow in case of globe valves and check valves. 9
Technical Bid Check List of Certificates/Documents required to be submitted in the Technical Bid The tenderer are advised to submit the following certificates under the category of Vital documents invariably along-with Bid. 1. EMD or Bid Security Declaration as per Annexure-II. 2. GST No. of firm. 3. Establishment (Gumashta) Registration Certificate / Partnership deed/ Registration under Company Act. 4. PAN Card, copy of proprietor of firm. 5. Duly stamped & signed set of tender document from Proprietor/ authorized signatory of firm shall be kept in Technical Bid envelop along with EMD or Bid Security Declaration & other credentials. 6. Duly filled up Establishment/ firm Bio-Data form (Annexure-I) mentioning the details of firm/ Proprietor, Trading experience etc. 7. Non- Blacklisting/ vigilance enquiry declaration as per Annexure-IV on firm letter head. Note : Duly filled up Financial Bid form (Annexure-III), with firm seal & sign of proprietor/ Authorized signatory shall be kept in a separate sealed envelope marked as Financial Bid & name of agency. 10
Annexure-I ESTABLISHMENT/ FIRM BIO DATA FORM 1) Name of Trading Firm/ Supplier/ Distributor : 2) Address with Telephone No. : 3) Registration Details (Gumashta) of firm : 4) Name of Proprietor : 5) Total Trading experience of Plumbing & Sanitary Consumable items (Years) : 6) GST Registration No. of firm : 7) PAN No. of Proprietor : knowledge. It is hereby declared that information provided are true & correct, to the best of our Stamp of firm with authorized signature 11
Annexure-II Performa of Bid Security Declaration It is here by submitted that if I/We (Name of bidder/ firm/ Company) withdraw or modify the bids during period of validity, or if I/We... (Name of the bidder/ firm/ company) are awarded the rate contract and I/We... (Name of the bidders/ firm/ company) fail to sign the contract or to submit a performance security before signing the rate contract. I/ We... (Name of bidder/ firm/ company) will be suspended for the period of two years from participation in the bids of the BMHRC. Date :... Authorized Signatory Name & Seal 12
Annexure-III (Price Bid) SCHEDULE OF REQUIREMENT OF STORES PLUMBING & SANITARY CONSUMABLE ITEMS Sl. No Description of Stores /Items (a) A) GI Pipes & Fittings : Preferred makes (b) Unit (c) Tentative annual requirement of items (d) Make of offered item (e) Basic item rate (with out tax) (f) Applicable GST on item rates (g) MRP (h) 1. GI Pipe 15mm 2. GI Pipe 20mm 3. GI Pipe 25mm 4. GI Pipe 32mm 5. GI Pipe 40mm 6. GI Pipe 50mm Swastik, Jindal, Surya or Swastik, Jindal, Surya or Swastik, Jindal, Surya or Swastik, Jindal, Surya or Swastik, Jindal, Surya or Swastik, Jindal, Surya or Per meter 180 Per meter 120 Per meter 90 Per meter 30 Per meter 30 Per meter 30 7. GI Elbow 1/2 8. GI Elbow 3/4 9. GI Elbow 1 10. GI Elbow 1 1/4 11. GI Elbow 1 1/2 or Each 80 or Each 60 or Each 40 or Each 20 or Each 10 12. GI Elbow 2 or Each 08 13. GI Socket 1/2 14. GI Socket 3/4 15. GI Socket 1 16. GI Socket 1 1/4 17. GI Socket 1 1/2 18. GI Socket 2 19. GI Union 1/2 20. GI Union 3/4 21. GI Union 1 22. GI Union 1 1/4 or Each 80 or Each 60 or Each 40 or Each 20 or Each 15 or Each 20 or Each 30 or Each 30 or Each 20 or Each 06 23. GI Union 1 1/2 24. GI Union 2 or or Each 06 Each 06 13
Sl. No Description of Stores /Items (a) Preferred makes (b) Unit (c) Tentative annual requirement of items (d) Make of offered item (e) Basic item rate (with out tax) (f) Applicable GST on item rates (g) MRP (h) 25. GI Tee 1/2 or Each 20 26. GI Tee 3/4 or Each 20 27. GI Tee 1 28. GI Tee 1 1/4 or or Each 15 Each 10 29. GI Tee 1 1/2 30. GI Tee 2 31. GI Reducer Elbow 20x15 32. GI Reducer Elbow 20x25 33. GI Reducer Elbow 15x25 34. GI Reducer Tee 20x15 or Each 05 or Each 05 or Each 20 or Each 10 or Each 10 or Each 10 35. GI Reducer Tee 20x25 or Each 10 36. GI Reducer Tee 15x25 37. GI Reducer Socket 20x25 38. GI Reducer Socket 15x25 or Each 10 or Each 20 or Each 10 39. GI Tank Nipple 50mm or Each 02 40. GI Tank Nipple 40mm 41. GI Tank Nipple 32mm 42. GI Tank Nipple 25mm 43. GI Tank Nipple 20mm 44. GI Tank Nipple 15mm or Each 04 or Each 04 or Each 08 or Each 08 or Each 08 45. GI Plug 1/2 - Each 20 46. GI Plug 3/4 - Each 20 47. GI Plug 1 - Each 20 48. GI Plug 1 1/4 - Each 10 49. GI Plug 1 1/2 - Each 10 50. GI Plug 2 - Each 05 51. Nipple 50x12 - Each 05 52. Nipple 50x9 - Each 05 14
Sl. No Description of Stores /Items (a) Preferred makes (b) Unit (c) Tentative annual requirement of items (d) Make of offered item (e) Basic item rate (with out tax) (f) Applicable GST on item rates (g) MRP (h) 53. Nipple 50x6 - Each 05 54. Nipple 50x4 - Each 05 55. Nipple 50x3 - Each 05 56. Nipple 40x12 - Each 08 57. Nipple 40x9 - Each 08 58. Nipple 40x6 - Each 06 59. Nipple 40x4 - Each 06 60. Nipple 40x3 - Each 06 61. Nipple 32x12 - Each 10 62. Nipple 32x9 - Each 10 63. Nipple 32x6 - Each 08 64. Nipple 32x4 - Each 08 65. Nipple 32x3 - Each 08 66. Nipple 32x2 - Each 10 67. Nipple 25x12 - Each 10 68. Nipple 25x9 - Each 10 69. Nipple 25x6 - Each 10 70. Nipple 25x4 - Each 15 71. Nipple 25x3 - Each 15 72. Nipple 25x2 - Each 15 73. Nipple 20x12 - Each 10 74. Nipple 20x9 - Each 15 75. Nipple 20x6 - Each 15 76. Nipple 20x4 - Each 15 77. Nipple 20x3 - Each 15 78. Nipple 20x2 - Each 15 79. Nipple 15x12 - Each 30 80. Nipple 15x9 - Each 30 15
Sl. No Description of Stores /Items (a) Preferred makes (b) Unit (c) Tentative annual requirement of items (d) Make of offered item (e) Basic item rate (with out tax) (f) Applicable GST on item rates (g) MRP (h) 81. Nipple 15x6 - Each 30 82. Nipple 15x4 - Each 40 83. Nipple 15x3 - Each 40 84. Nipple 15x2 - Each 40 B: CI Pipe & Fittings 85. CI P trap 4x3 86. CI P trap 4x4 87. CI Tee 4x4 88. CI Tee 3x3 89. CI D clamp 4x4 Bharat, NIF, NECO or Each 8 Bharat, NIF, NECO or Each 8 Bharat, NIF, NECO or Each 3 Bharat, NIF, NECO or Each 3 Bharat, NIF, NECO or Set 6 90. CI D clamp 3x3 C : Ceremic Sanitary fittings : 91. Ceremic IWC 23'' 92. Ceremic IWC 20'' 93. Ceremic EWC Standard size' 94. Ceremic wash Basin 22'' 95. Ceremic Wash Basin 20'' D : Brass & GM valves & fittings : Bharat, NIF, NECO or Johnson Pedder, Parryware, Hindware Cera or Johnson Pedder, Parryware, Hindware Cera or Johnson Pedder, Parryware, Hindware Cera or Johnson Pedder, Parryware, Hindware Cera or Johnson Pedder, Parryware, Hindware Cera or Set 5 15 6 18 15 05 96. Brass Gate Valve 15mm 97. Brass Gate Valve 20mm 98. Brass Gate Valve 25mm 99. Brass Gate Valve 32mm 100. Brass Gate Valve 40mm 101. Brass Gate Valve 50mm 102. Brass Ball Valve 15mm Zoloto, Leader, IVC or Each 6 Zoloto, Leader, IVC or Each 5 Zoloto, Leader, IVC or Each 5 Zoloto, Leader, IVC or Each 2 Zoloto, Leader, IVC or Each 2 Zoloto, Leader, IVC or Each 2 Zoloto, Leader, IVC or Each 10 103. Brass Ball Valve 20mm 104. Brass Ball Valve 25mm Zoloto, Leader, IVC or Zoloto, Leader, IVC or Each 8 Each 6 16
Sl. No Description of Stores /Items (a) Preferred makes (b) Unit (c) Tentative annual requirement of items (d) Make of offered item (e) Basic item rate (with out tax) (f) Applicable GST on item rates (g) MRP (h) 105. Brass Spendle 4no. ISI Mark Each 240 106. 107. 108. Water Tank Overflow Ball cock with Rod & ball (Brass) 15mm Water Tank Overflow Ball cock with Rod & ball (Brass) 20mm Water Tank Overflow Ball cock with Rod & ball (Brass) 25mm ISI Mark Each 12 ISI Mark Each 12 ISI Mark Each 12 109. GM Gate Valve 15 mm ISI Mark Each 06 110. GM Gate Valve 20 mm ISI Mark Each 06 111. GM Gate Valve 25 mm ISI Mark Each 06 E : CP & SS Sanitary Fittings : 112. CP Bib Cock Short body 113. CP Bib Cock Long body 114. CP Angle Cock 115. CP Pillar Cock 116. CP Stop Cock 117. CP Elbow Action Bib Cock 118. CP Elbow Action Pillar Cock 119. CP Bottle Trap 120. CP Shower Hindware, Parko, Gracia, ESSO, Parryware or Hindware, Parko, Gracia, ESSO, Parryware or Hindware, Parko, Gracia, ESSO, Parryware or Hindware, Parko, Gracia, ESSO, Parryware or Hindware, Parko, Gracia, ESSO, Parryware or Hindware, Parko, Gracia, ESSO, Parryware or Hindware, Parko, Gracia, ESSO, Parryware or Hindware, Parko, Gracia, ESSO, Parryware or Hindware, Parko, Gracia, ESSO, Parryware or Each 25 Each 20 Each 40 Each 25 Each 05 Each 15 Each 10 Each 15 Each 10 121. CP Waste Coupling 32mm ISI Mark Each 20 122. CP Waste Coupling 40mm ISI Mark Each 10 123. CP Sink Coupling 100mm ISI Mark Each 8 124. CP Jali 3 ISI Mark Each 30 125. CP Jali 4 ISI Mark Each 30 126. CP Jali 5 ISI Mark Each 10 127. S.S. Kitchen Sink 18 x 24 ISI Mark Each 05 F: PVC Sanitary fittings 128. PVC Seat Cover 23 129. PVC Tank Cover medium size Each 30 Each 30 17
Sl. No Description of Stores /Items (a) 130. PVC Syphon Fitting for cistern 131. PVC Cistern Ball Cock 132. PVC Ball Cock 15mm with Rod & Ball 133. PVC Ball Cock 20mm with Rod & Ball 134. PVC Ball Cock 25mm with Rod & Ball 135. PVC Cistern Tank 136. PVC Cistern Handle 137. PVC Connection Pipe 24 Preferred makes (b) Unit (c) Tentative annual requirement of items (d) Each 25 Each 100 Each 10 Each 10 Each 10 Each 12 Each 300 Each 200 Make of offered item (e) Basic item rate (with out tax) (f) Applicable GST on item rates (g) MRP (h) 138. PVC Waste Pipe 32 mm - Each 100 139. PVC Waste Pipe Roll 32mm - Rft 200 140. PVC Coupler 32mm - Each 50 141. PVC Coupler 40mm - Each 50 142. PVC Coupler 50mm - Each 50 143. PVC Syphon washer - Each 100 144. PVC Connection Pipe washer - Each 200 145. PVC Bib cock washer - Each 200 146. Teflon Tape - Roll 100 G : UPVC & CPVC Pipes & Trap 147. UPVC Pipe 3 148. UPVC Pipe 4 149. CPVC Pipe 15mm 150. CPVC Pipe 20mm Kissan, Kasta, Apollo or Rmt 60 Kissan, Kasta, Apollo or Rmt 60 Kissan, Kasta, Apollo or Rmt 60 Kissan, Kasta, Apollo or Rmt 60 151. CPVC Pipe 25mm Kissan, Kasta, Apollo or Rmt 20 152. UPVC Nahani Trap 4'' Kissan, Kasta, Apollo or Each 06 Authorised signature with seal of firm Note: the items rates quoted by the agency for Supply to BMHRC, Bhopal shall be of good quality & durable without any manufacturing defects with BIS certification marking. 18
ANNEXURE-IV Undertaking (To be submitted by the Distributor/ dealer/manufacturer on firm s letterhead) I/We certify that I/We have gone through & agree to the terms & conditions of Tender number: BMHRC/Limited Tender/ES/Civil/Material-Plumbing & Sanitary/2017-18/15 (2 nd Call) and undertake to comply with them for the contract period (valid for 365 days from the date of signing of the agreement deed plus extendable on same terms, conditions & item rates for a further period of one year if agreed between Director, BMHRC & Bidder). 1. I/We certify that, I/We or any of my/our products have neither been blacklisted nor debarred from participating in future tenders by any State Government / Central Government organizations. 2. There is no vigilance / CBI case or court case pending against me/our firm or any of the partners/directors of the firm. 3. I/We, hereby, agree to all the terms and conditions, stipulated by the BMHRC in this tender. 4. I/We understand that The Director BMHRC, Bhopal reserves the right to reject any or all tenders including the lowest quotation without assigning any reasons (s) thereof. 5. I/We agree If at any stage during the tenure of the tender, I/We reduce the unit price lower than the price charged under the agreement, I/We will forthwith notify such reductions of the unit price to the Director BMHRC, Bhopal Name Authorised signature with seal of firm Address: 19