Agreement File Reference PRCN024X - Unmetered Connection Agreement - Long Form doc

Transcription

1 AGREEMENT FOR UNMETERED CONNECTION TO [EASTERN POWER NETWORKS PLC s LONDON POWER NETWORKS PLC s SOUTH EASTERN POWER NETWORKS PLC s UK POWER NETWORKS (IDNO) LTD s] DISTRIBUTION SYSTEM Income Services Manager UK Power Networks (Operations) Ltd Energy House Carrier Business Park Hazelwick Avenue Three Bridges Crawley West Sussex RH10 1EX Legal File Reference PR/CN/024X Page 1/30

2 THIS AGREEMENT is made this..... BETWEEN : (1) <Registered name of the relevant licensed distribution company> Company Number <Registered number of the relevant licensed distribution company> Newington House, 237 Southwark Bridge Road, London, SE1 6NP ( the Company ) AND (2) <ANOTHER Ltd> <Company Number>, <Any Number>, <Any Street>, <Any Town>, <Any Country> ( the Customer ) WHEREAS : (A) The Company is the holder of a Licence to distribute electricity granted pursuant to section 6 of The Electricity Act By the Company's electricity distribution licence, granted under Section 6(1)(c) of the Electricity Act 1989 (B) The Customer has requested that the Customer s Unmetered Installation be Connected at the Exit Points and remain so Connected to the Company s Distribution System and the Company has agreed to such Connection in accordance with the terms and conditions of this Agreement. NOW IT IS AGREED as follows:- (1) Documents Constituting this Agreement In addition to this part signed on behalf of the Company and the Customer, this Agreement includes the attached documents:- Standard Terms for the Connection of the Customer's Unmetered Installation(s); Schedule 1 : Schedule 2 : Schedule 3 : Schedule 4 : Schedule 5 : Detailed Inventory Company Requirements; Summary Inventory of Customer's Unmetered Installation(s); Characteristics of Supply; Addresses for Service of Notices; Audit process. and expressions used in this part shall have the same meaning as they have in the Standard Terms for the Connection of the Customer s Unmetered Installation(s). (2) Provision of Services Subject to the provisions of this Agreement, the Company shall allow the Customer's Unmetered Installation(s) to be and remain Connected to the Distribution System. IN WITNESS WHEREOF this Agreement has been signed as follows:- SIGNATURE: PRINT NAME: DATE: FOR THE CUSTOMER FOR THE COMPANY Legal File Reference PR/CN/024X Page 2/30

3 STANDARD TERMS FOR THE CONNECTION OF THE CUSTOMER'S UNMETERED INSTALLATION CONTENTS Clause Heading Page 1. DEFINITIONS CONNECTION CONNECTION OF THE CUSTOMER'S UNMETERED INSTALLATION PAYMENT OF CHARGES LIMITATION OF DEMAND COMPLIANCE WITH DISTRIBUTION CODE PLANT AND APPARATUS INFORMATION THE CUSTOMER'S UNMETERED INSTALLATION POWER FACTOR AND PHASE BALANCE MODIFICATIONS RIGHTS OF ACCESS METERING AND OTHER EQUIPMENT ASSIGNMENT AND SUB-CONTRACTING TERM, EVENTS OF DEFAULT AND TERMINATION FORCE MAJEURE LIMITATION OF LIABILITY WAIVER ENTIRE AGREEMENT GOVERNING LAW DISPUTES RESOLUTION VARIATIONS NOTICES SAVINGS CLAUSE...24 SCHEDULE 1 - DETAILED INVENTORY COMPANY REQUIREMENTS...25 SCHEDULE 2- SUMMARY INVENTORY OF CUSTOMER S UNMETERED INSTALLATION...26 SCHEDULE 3 - CHARACTERISTICS OF SUPPLY AT EACH EXIT POINT...27 SCHEDULE 4 - ADDRESSES FOR SERVICE OF NOTICES...28 SCHEDULE 5 - AUDIT PROCESS...29 SCHEDULE 6 - TECHNICAL CONDITIONS...30 Legal File Reference PR/CN/024X Page 3/30

4 1. DEFINITIONS 1.1 In the Agreement except where the context otherwise requires the following expressions shall have the meanings set opposite them:- "Accreditation" "Accreditation Authority" means accreditation of any relevant person and certification of that person's business processes by the Accreditation Authority and cognate expressions shall be construed accordingly; means the Performance Assurance Board (as defined in the Balancing and Settlement Code, when Accrediting persons pursuant to Section J of the Balancing and Settlement Code); "Act" means the Electricity Act "Agreed Codes" "this Agreement" "Apparatus" "Approved Software" Authority Balancing and Settlement Code or BSC "Certificate" "Company's Equipment" "Company's Premises" "Competent Authority" the Standard Apparatus Classification Codes and the Switch Regime Codes set out in the Unmetered Supplies Procedure; means this agreement and any documents referred to and expressly incorporated therein; means all equipment in which electrical conductors are used, supported or of which they may form part; means the computer programmes known as LAMP and FLARE and such other software as may be approved under the Unmetered Supplies Procedure for the purpose of producing half-hourly consumption figures from the information specified in Schedule 2; means the Gas and Electricity Markets Authority established by Section 1 of the Utilities Act 2000; means the Balancing and Settlement Code dated 14 th August 2000, including all Service Lines and BSC Procedures (as therein defined) made under it; means an Unmetered Supplies Certificate issued under the Unmetered Supplies Procedure; means the switchgear, metering or other equipment, lines or other parts of the Distribution System and/or any other property or rights of the Company; means any premises owned, occupied or controlled by the Company to which the Customer may require access for any purpose in connection with this Agreement; means the Secretary of State, the Authority and any local or national agency, authority, department, inspectorate, minister, ministry, official or public or statutory person (whether autonomous or not) of, or of the government of, the United Kingdom or of the European Union; Legal File Reference PR/CN/024X Page 4/30

5 "Connect" "Connection and Use of System Code" Control Equipment the installation of the Company s Electric Lines and Electric Plant in such a way that subject to Energisation an electrical current may flow through the Exit Point between the Distribution System and the Customer s Unmetered Installation and cognate expressions shall be construed accordingly. means the agreement envisaged in condition 10B of NGC s Transmission Licence and/or any Connection and Use of System Code established pursuant to NGC s Transmission Licence which replaces such agreement in whole or part; means:- (i) (ii) (iii) the control equipment owned by the Customer or the Company, as applicable; installed on the Company s side of the supply terminals; and used for the purposes of controlling the actual pattern of consumption of electricity at the Customer s Exit Point or group of Exit Points in lieu of the Customer providing its own control equipment within the Customer s Unmetered Installation; Costs "Customer's Equipment" "Customer's Unmetered Installation" "Customer's Premises" "De-energise" means all expenses and costs incurred including overhead and financing charges properly allocated thereto and a reasonable rate of return on the capital represented by such costs; means the switchgear, metering or other equipment, lines or other parts of the Customer s Unmetered Installation and/or any other property or rights of the Customer (which for the avoidance of doubt excludes the Control Equipment); means the electric lines and electric plant situated on the Customer s side of the supply terminals together with any equipment permanently connected or in tended to be permanently connected there to on that side; means any premises owned, occupied or controlled by the Customer to which the Company may require access for any purpose in connection with this Agreement; means, in relation to any Exit Point, the deliberate operation of any switch or the removal of any Electric line and/or Electrical Plant or any fuse or the taking of any other step whereby no electrical current can flow through an Exit Point between the Distribution System and the Customer's Unmetered Installation for any purpose other than a system outage and cognate expressions shall be construed accordingly. Legal File Reference PR/CN/024X Page 5/30

6 "De-energisation Works" "Directive" "Disconnect" "the Distribution Code" "Distribution System" "Energise" "Energisation Works" "Equivalent Meter" "Estimated Annual Consumption (EAC)" "Exit Point(s)" means the movement of any switch, the removal of any fuse or meter, or the taking of any other step to De-energise a Metering Point; includes any present or future directive, requirement, instruction, direction or rule of any Competent Authority (but only, if not having the force of law, if compliance with the Directive is in accordance with the general practice of persons to whom the Directive is addressed) and includes any modification, extension or replacement thereof then in force; the removal of or the change in installation of the Company s Electric Lines and Electric Plant or the taking of any other step whereby no electrical current can flow through an Exit Point between the Distribution System and the Customer's Unmetered Installation for any purpose other than a system outage and cognate expressions shall be construed accordingly. means the distribution code referred to in the Licence; has the same meaning as that term as it is defined in the licence; means, in relation to any Exit Point, the deliberate operation of any switch or the insertion of any Electric line and/or Electrical Plant or any fuse or the taking of any other step whereby electrical current can flow through an Exit Point between the Distribution System and the Customer's Unmetered Installation and cognate expressions shall be construed accordingly. means the movement of any switch or the addition of any fuse or meter to Energise a Metering Point; means an equivalent half hourly meter; means for each Metering Point a weather- normalised estimate of consumption over a calendar year; means the point(s) of connection at which upon Energisation a supply of electricity may flow between the Distribution System and the Customer's Unmetered Installation as identified in Schedules 1 and 2 as amended from time to time in accordance with this Agreement; Legal File Reference PR/CN/024X Page 6/30

7 "Force Majeure" "Good Industry Practice" "Grid Supply Point" "GSP Group" "Half Hourly (HH) Trading" "Inventory" "Item" "kva" "kw" "Licence" means any event or circumstance which is beyond the reasonable control of either party and which results in or causes the failure of that party to perform any of its obligations under this Agreement including act of God, strike, lockout or other industrial disturbance, act of the public enemy, war declared or undeclared, threat of war, terrorist act, blockade, revolution, riot, insurrection, civil commotion, public demonstration, sabotage, act of vandalism, lightning, fire, storm, flood, earthquake, accumulation of snow or ice, explosion, fault or failure of plant or which (in each case) could not have been prevented by Good Industry Practice, on the part of the party seeking to be relieved of its obligations under this Agreement, governmental restraint, Act of Parliament, other legislation, bye law and Directive (not being any order, regulation or direction under Section 32, 33, 34 or 35 of the Act) or the failure of any generator or NGC to deliver electricity to the Company or any deficiency in such delivery to the extent that such failure or deficiency or the consequences thereof could not have been prevented by Good Industry Practice on the part of the Party seeking to be relieved of its obligations under this Agreement, provided that lack of funds shall not be interpreted as a cause beyond that Party's reasonable control; means the exercise of that degree of skill, diligence, prudence and foresight which would reasonably and ordinarily be expected from a skilled and experienced operator engaged in the same type of undertaking under the same or similar circumstances; means the point of connection between the Transmission System and the Distribution System or between the Transmission System and a network for the distribution of electricity owned or operated by a person other than the Company means the group of Grid Supply Points within the Company's distribution services area as defined in the Licence; means the trading for settlement purposes of Unmetered Supplies using an Equivalent Meter in accordance with the BSC; means a record of the Customer's Unmetered Installation which contains in relation to each Item the information specified in Schedule 1; means each piece of equipment, appliance or device which forms part of the Customer's Unmetered Installation; means kilovoltamperes; means kilowatts; means the Company's Electricity Distribution licence granted to it pursuant to Section 6(1)(c) of the Act; Legal File Reference PR/CN/024X Page 7/30

8 "Mainsborne Communications" "Master Registration Agreement" "Maximum Capacity" Measuring and Monitoring equipment "Meter Administrator" "Metering Point" "Metering Equipment" "Modification" "Monitoring Equipment" "NGC" "Non-Geographic Inventory" "Party" "Plant" the passing of electrical voltage and/or current signals upon or into the Distribution System that transmits analogue or digital communications and/or data through the Distribution System. means the agreement of that name dated 1 June 1998 to which by virtue of Condition 20 of its Licence the Company is required to be a party; means in respect of any Exit Point, 3 kva save as expressly stated in Schedule 2; means equipment that may be used for the purposes of measuring or checking consumption for the purposes other than settlement in relation to an Unmetered Supply; means a duly Accredited person appointed to administer an Equivalent Meter; means in relation to an Unmetered Supply, the notional point at which electricity is treated as being supplied to a Customer's Unmetered Installation for the settlement purposes of estimating the volume of the electricity consumed; means metering equipment that may be used for the purposes of measuring or checking consumption for the purposes of settlement in relation to an Unmetered Supply, the notional point at which electricity is treated as being supplied to a Customer's Unmetered Installation for the purposes of estimating the volume of the electricity consumed; means any actual or proposed replacement, renovation, modification, alteration or construction by or on behalf of a Party of that Party's Plant or Apparatus or the manner of its operation at an Exit Point which has or will have an effect on the other Party at an Exit Point; means equipment used for determining the characteristics of supply taken through the Customer's Unmetered Installation; means the National Grid Company plc; means an inventory of the Customer's Unmetered Installation which does not contain the geographic information specified in Schedule 1; each person for the time being and from time to time party to this Agreement and any successor(s) in title to, or permitted assign(s) of, such person; means fixed and movable items other than Apparatus; Legal File Reference PR/CN/024X Page 8/30

9 "Profile" "Profile Class" "Profiled Trading" "Prospective Short-Circuit Current Rating" "the Regulations" "Summary Inventory" "Supplier" means a pattern of consumption of electricity that is established and approved by the Profile Administrator that is described by daily consumption in half hour periods commencing on the hour and half-hour throughout the period of a day, such pattern of daily consumption capable of being different for each day within a Calendar Year within the Profile; has the meaning given to that term in the Balancing and Settlement Code; means trading for settlement purposes of Unmetered Supplies using an Estimated Annual Consumption and a Profile from a relevant Profile Class; means the prospective short circuit current rating expressed in amperes of the Distribution System at an Exit Point. means the Electricity Safety, Quality and Continuity Regulations 2002 and/or the Electricity (Unmetered Supply) Regulations 2001(as the case may be) ; means a statement of the total numbers, type and rating of lamps or other Apparatus extracted from the Inventory or otherwise provided by the Customer as amended from time to time (which as at the date of this Agreement is set out in Schedule 2); means a person who is the holder of a licence to supply electricity under the Act or is exempt under the Act from the requirement to hold such a licence; "Technical Conditions" means the technical conditions set out in Schedule 6 setting out (i) conditions deemed by the Company as necessary for the interconnected operation any part of the Customer s Unmetered Installation used for generating electricity and (ii) conditions deemed by the Company as necessary for interconnected operation of any alternative sources of electrical energy with the Distribution System and (iii) any other specific conditions deemed by the Company as necessary for the connection operation and management of the Connection(s) specified in this Agreement. "Unmetered Supplies" "Unmetered Supplies Certificate" means a supply of electricity the quantity of which the Company has authorised not to be measured by physical metering equipment by the issue of a relevant Unmetered Supplies Certificate and cognate expressions shall be construed accordingly; means a certificate issued by the Company under the Unmetered Supplies Procedure stating, among other things, the Metering Points allocated to the Inventory; Legal File Reference PR/CN/024X Page 9/30

10 "Unmetered Supplies Procedure" "Use of System Agreement" "Working Day" 1.2 In this Agreement - Section S of the Balancing and Settlement Code and BSC Procedure BSCP 520 established under the Balancing and Settlement Code and any replacement or substitute BSC Procedure from time to time, as appropriate; means an agreement between the Company and any other person for the use of its Distribution System; means any day other than a Saturday, a Sunday or any bank holiday or public holiday. (a) any reference to: (i) (ii) (iii) (iv) (v) "Clause" or a "sub-clause" is a reference to a clause or sub-clause hereof; a "Schedule" is, subject to any contrary indication, a reference to a schedule hereto; a statute, statutory instrument, regulation or order shall be construed as a reference to such statute, statutory instrument, regulation or order as amended or re-enacted from time to time; another agreement or any deed or other instrument shall be construed as a reference to that other agreement, deed or other instrument as the same may have been, or may from time to time be, amended, varied, supplemented or novated; the masculine shall include the feminine and any reference to the singular shall include the plural and vice versa in each case; (b) (c) the word "including" is to be construed without limitation and; Clause headings are for ease of reference only. 2. CONNECTION The Agreement shall govern with effect from the date hereof the terms upon which the Company shall permit the Customer's Unmetered Installation to be connected to the Distribution System at an Exit Point to receive Unmetered Supplies, and shall supersede any prior agreements or arrangements between the Company and the Customer in respect of each Exit Point and Customer's Unmetered Installation. 3. CONNECTION OF THE CUSTOMER'S UNMETERED INSTALLATION 3.1 Subject to the terms of this Agreement the Company shall permit the Customer's Unmetered Installation to be Connected and remain Connected to the Distribution System at the Exit Points and to be and remain Energised to receive Unmetered Supplies. 3.2 For the avoidance of doubt, the right to be (and remain) Connected and the right to be (and remain) Energised is:- (a) conditional upon:- (i) evidence being given to the Company in a form reasonably satisfactory to the Company that a Supplier has entered into an agreement with the Customer for the supply of electricity to the Customer's Unmetered Installation and into a Use of System Agreement; and Legal File Reference PR/CN/024X Page 10/30

11 (ii) (iii) (iv) (v) in respect of Supplies to be the subject of Half-Hourly Trading, a Meter Administrator has been appointed to relation to the Customer's Unmetered Installation; and such agreements have become unconditional and continue in full force and effect; and the Customer and the Company have agreed the information required to be included in Schedule 2 in respect of each Item of the Customer's Unmetered Installation for each Exit Point; and the Company having issued a Certificate to the Customer; and (b) (vi) (vii) the Certificate continuing in full force and effect; and the Customer agreeing observing and complying with the Technical Conditions set out in Schedule 6 where the Customer s Unmetered Installation includes generating plant or an interconnection with any alternative sources of electrical energy in either case not falling within paragraph 22 of the Regulations and in any other circumstances which necessitate the setting of Technical Conditions upon the Customer s Unmetered Installation and associated Exit Points as specified in this Agreement. subject to the terms of this Agreement. 3.3 Except where the Company determines that it is not appropriate to do so having regard to any supplies taken through any Exit Point, the Company shall De-Energise any Exit Point as soon as reasonably practicable after being instructed in writing to do so by the Customer or by the Supplier referred to in Clause 3.2(a)(i) in accordance with any Use of System Agreement and shall act in accordance with Good Industry Practice in relation to such De-Energisation provided always that, where the instruction has been given by a Supplier, the Company will give the Customer notice of its intention to De-Energise, and where permitted any grounds stated in the instruction. 3.4 Except where the Company determines that it is not appropriate to do so having regard to any supplies taken through any Exit Point, the Company may De-Energise any Exit Point at any time where:- (a) (b) (c) (d) (e) (f) (g) (h) (i) (j) it is instructed to do so by NGC pursuant to the terms of the Connection and Use of System Code; or it is required to do so under the BSC; or it is required to do so by the Act; or where the Regulations entitle it to do so; or the conditions referred to in Clause 3.2(a) cease to be satisfied; or to enable the Company to inspect, alter, maintain, repair or add to any part of the Distribution System; or it is reasonably necessary for the restoration of supplies to other customers of the Company: or it is entitled to do so under its Use of System Agreement with the Customer's Supplier; or if the Supplier is in breach of its Use of System Agreement and the Company is entitled not to provide use of system to the Supplier as a result of that breach; or it is otherwise permitted to do so under the terms of this Agreement Legal File Reference PR/CN/024X Page 11/30

12 and shall at all times act in accordance with Good Industry Practice in relation to such De- Energisation provided always that if the Company shall be notified in writing of circumstances in which it may be instructed or required to act under (a), (b) or (c) above, or becomes aware of circumstances in which it may wish to act under (c), (d), (e), (f), (g), (h) or (i) above, it shall give to the Customer such notice as it shall consider to be reasonably practicable in the circumstances. 3.5 If at any time when the Customer does not have a right for a relevant Exit Point to be (and remain) Energised but nevertheless takes a supply of electricity through the relevant Exit Point the Customer shall pay to the Company forthwith upon demand such sum as the Company may require for such supply of electricity calculated in accordance with the Company's then charges, together with such other reasonable and proper Costs, losses and expenses as the Company has incurred as a result thereof. 3.6 This Agreement shall not give the Customer any right to a supply of electricity or to use the Distribution System, and the Company therefore makes no warranty to the Customer in relation thereto. 3.7 At such times as any Exit Point is Energised in accordance with the terms of this Agreement, the supply of electricity delivered at that Exit Point shall comply with the specification in Schedule 3, subject to such variations as may be permitted by the Regulations. The Company does not guarantee that the supply of electricity will be free from transient variances in voltage and frequency or voltage pulses or harmonic frequencies and the Customer must take its own protective measures if it requires a higher standard of supply. 3.8 If any Exit Point is De-Energised temporarily at the request of the Customer, the Customer shall pay to the Company on demand any reasonable and proper Costs incurred by the Company as a result of such De-Energisation and any subsequent re-energisation. 3.9 The Company and the Customer shall at all times comply with the Unmetered Supplies Procedure. 4. PAYMENT OF CHARGES 4.1 The Customer shall pay all amounts due from time to time to the Company under this Agreement within 30 days of the date of the Company s invoice. 4.2 If any amount owing by one Party to the other under the terms of this Agreement remains unpaid after the due date for payment the Party to whom the amount is owed shall be paid interest unpaid at the rate of statutory interest from time to time as prescribed by order made from time to time under section 6 of the Late Payment of Commercial Debts (Interest) Act 1998 until that Party has received cleared funds. 4.3 Where the Company is requested or required to effect a Disconnection of an Exit Point, the Customer shall pay on demand the Costs incurred by the Company in Disconnecting the Exit Point and removing the Company's Equipment in accordance with its Licence. 4.4 All amounts payable under this Agreement are exclusive of Value Added Tax and the Company may add Value Added Tax at the applicable rate. 4.5 If at any time, (whether before or after termination of this Agreement) it is discovered, that there has been any overpayment or underpayment of money due under the terms of this Agreement, either Party may give notice to the other of the error in question and the necessary adjustment shall be made as soon as reasonably practical after the date of notice. If the Parties shall have failed to agree upon what adjustment, if any, shall be required (including interest) unpaid at the rate of statutory interest from time to time as prescribed by order made from time to time under section 6 of the Late Payment of Commercial Debts (Interest) Act 1998 within 30 days of the date of the first Party's notice then either Party shall be entitled by way of written application to refer the matter to arbitration pursuant to Clause 21. This provision, together with those provisions of Clause 21 necessary to give effect to it, shall survive termination of this Agreement. Legal File Reference PR/CN/024X Page 12/30

13 4.6 If at any time any Item shall be re-rated such that the characteristics of its consumption of electricity are greater than they were before such re-rating the Company may charge the Customer an amount equal to the difference between the electricity consumed by that Item as if no re-rating had taken place and the electricity deemed consumed as a result of the re-rating from the date on which the Item first was registered in the Inventory. 5. LIMITATION OF DEMAND 5.1 The Customer shall never take a supply of electricity through an Exit Point that exceeds the Maximum Capacity of that Exit Point. If the Maximum Capacity of the Exit Point is exceeded, the Company may give written notice to the Customer setting out details of the steps that the Company requires the Customer to take to remedy the situation If the Customer has not remedied the situation within three days of receipt of such written notice, the Company shall be entitled to De-energise the Exit Point until such time as the Customer is able to satisfy the Company that the Maximum Capacity will not be exceeded upon and subsequent to the Exit Point being re-energised. 5.2 Where the Maximum Capacity is exceeded the Customer shall pay to the Company the reasonable additional Costs incurred by the Company as a result thereof, including the Costs of De-Energising the Exit Point pursuant to Clause 5.1 and any subsequent re-energisation. 5.3 Except where such variation amounts to a Modification, the Customer may, subject to Clause 22 vary the Maximum Capacity of an Exit Point by giving 28 days written notice of its intention to do so to the Company. Where the variation amounts to a Modification, the Parties will proceed in accordance with the provisions of Clause The Company shall not be obliged to provide capacity at an Exit Point in excess of the Maximum Capacity of that Exit Point. 6. COMPLIANCE WITH DISTRIBUTION CODE 6.1 The Parties shall comply with all of the provisions of the Distribution Code that are applicable to them. 6.2 In the event of any conflict between this Agreement and the Distribution Code, the Distribution Code shall prevail. 7. PLANT AND APPARATUS 7.1 Each Party shall ensure that its agents, employees and invitees shall not interfere with any of the Plant and/or Apparatus of the other Party save as expressly as otherwise permitted under this Agreement without the prior written consent of the other Party except or where emergency action has to be taken to protect the health and safety of persons or to prevent damage to property proximate to the relevant asset or to preserve or protect the Distribution System. 7.2 The Customer shall at all times take any precautions required to protect the Company's Equipment from damage and for that purpose shall comply with any reasonable requirements made by the Company from time to time. 7.3 Upon the failure or malfunctioning of Control Equipment owned by the Company, the Company will remove such equipment and replace with simple unswitched electrical connections of its choosing such that the associated electrical circuits will be permanently Energised. The Company will notify the Customer of the removal of such control equipment from within the Company s Distribution Systems and the Customer shall be responsible for re-declaring the consumption pattern of the associated Exit Points to reflect the changed pattern of operation in accordance with this Agreement. The Customer shall thereafter be responsible for implementing substitute control equipment within the Customer s Unmetered Installations at the Customer s cost. 7.4 Upon the failure or malfunctioning of Control Equipment owned by the Customer, the Company is permitted to remove such control equipment and make simple unswitched electrical connections of its Legal File Reference PR/CN/024X Page 13/30

14 choosing in place of such control equipment such that any previously switched electrical circuits will be permanently Energised. The Company will notify the Customer of the removal of such control equipment and the Customer shall be responsible for re-declaring the consumption pattern of the associated Exit Points to reflect the changed pattern of operation. The Customer shall thereafter be responsible for implementing substitute control equipment within the Customer s Unmetered Installations at the Customer s cost. 7.5 The Company will retain Control Equipment removed under Clause 7.4 for a period of up to six months from date of its removal. After expiry of this period the Company may at any time and in its sole discretion choose to dispose of any such control equipment. 7.6 Any Control Equipment still in the possession of the Company in accordance with Clause 7.5 may be collected by the Customer or, if requested to do so by the Customer, sent to the Customer at the Customer s cost provided that if the Customer shall fail to pay in advance the cost of its delivery, the Company may dispose of it. 7.7 If the Company disposes of any Control Equipment under Clauses 7.5 or 7.6, the Company will retain any proceeds of sale for its own use absolutely and if the proceeds of sale are insufficient to cover the costs of disposal any amount not so covered shall be a debt due from the Customer and payable upon demand. 8. INFORMATION 8.1 The information required to be provided by the Customer in respect of each Item of the Customer s Unmetered Installation is set out in Schedule 1. The Customer shall inform the Company in writing which method of trading (Half-Hourly or Profiled) is required for each Item at the time the Detailed Inventory required under Schedule 1 is first provided and on all successive times that new Items are added to the Detailed Inventory. 8.2 Schedule 2 contains the Summary Inventory at the date of this Agreement. Where the Customer is able to provide only a Non-Geographic Inventory of the Customer s Unmetered Installation it shall not be entitled to receive Unmetered Supplies unless it was receiving Unmetered Supplies on 1 April 1998 via the Distribution System. The Customer shall remain obliged to obtain and present to the Company all the information specified in Schedule 1 in relation to each Item, subject to clause The Customer shall on such dates and at such frequency as reasonably is specified and varied from time to time by the Company; a) provide to the Company the Inventory for Profile Traded Items including additions, deletions or amendments to the Inventory not less than once per Calendar Year due on the anniversary date of this Agreement unless such other submission dates and frequency of submission are specified by the Company b) provide to the Company the Inventory for Half-Hourly Traded Items including additions, deletions or amendments to the Inventory not less than once per Calendar Month due on the earliest day date closest to the day date of this Agreement unless such other submission dates and frequency of submission are specified by the Company. 8.4 Where Unmetered Supplies are to be subject to Half-Hourly Trading: (a) (b) (c) the frequency of the supply of the information described in Clause 8.3 shall be monthly; where the Company agrees to any addition, deletion or amendment, the Summary Inventory shall be deemed to be amended accordingly from the date the Company notifies the Customer that such additions, deletions and amendments are agreed; and the Company shall provide the Meter Administrator with a copy of Schedule 2 within 14 days of the commencement of this Agreement or such later date of receipt of a copy of Schedule 2 from the Customer. The Company shall notify the Meter Administrator of any revision to the Legal File Reference PR/CN/024X Page 14/30

15 Summary Inventory as soon as reasonably practicable following any change to the Summary Inventory. 8.5 Where Unmetered Supplies are subject to Profiled Trading: (a) (b) and the Company agrees to any addition, deletion or amendment, the Summary Inventory shall be deemed to be amended accordingly from the date the Company notifies the Customer that such additions, deletions and amendments are agreed; and if the Customer requests a copy of the revised Summary Inventory, the Company will, following payment of its Costs for its provision provide a copy of it within 14 days. 8.6 The Company may refuse to connect in accordance with the Regulations the Customer s Unmetered Installation where it is not appropriate for that Item or that type of Item to receive Unmetered Supplies and the Company may require the Customer to remove the Item or that type of Item from the Customer s Unmetered Installation so that it does not receive Unmetered Supplies. 8.7 The Company shall give the Customer notice as soon as possible after receipt of any notice given under Clause 8.3 if it will give rise to a Modification. 8.8 All information provided under this Clause shall be in such form (including computer readable form) as the Company reasonably may specify from time to time after consultation with the Customer. Where the information provided does not refer to the Agreed Codes, the Company will convert the information received as soon as reasonably practicable so that the information can be put into the Equivalent Meter and the Customer shall pay upon demand the Company s Costs of doing so. 8.9 The Parties shall comply with the provisions for audit as set out in Schedule Each Party shall provide as soon as reasonably possible such further information as the other Party's auditors reasonably may require The Customer shall not permit any Plant or Apparatus of a third party to be connected to the Customer s Unmetered Installation without the prior written permission of the Company The Customer grants or shall procure the grant (to the extent it is able to do so) to the Company free and unrestricted access to and use of any information or data concerning electricity taken through any Exit Point available under this Agreement, the Unmetered Supplies Procedures or the BSC for use in the Company's business whether that information or data is held by the Customer or another person on its behalf. Where the Meter Administrator is not the Company, the Customer shall procure that the Meter Administrator shall comply with the provisions of this Clause Where any additions or amendments to the Customer s Unmetered Installation are made pursuant to this Clause 8 or a Modification to the Customer s Unmetered Installation is made pursuant to Clause 11 the Customer shall ensure that any charges which the Company requires to be paid in accordance with the statement of charges made by the Company from time to time under Condition 13 of the Licence are paid for any such addition, amendment or Modification including those relevant to the addition of a new Exit Point and that any works which the Company requires to be effected are carried out such that they are fit for purpose 9. THE CUSTOMER'S UNMETERED INSTALLATION 9.1 The Customer shall ensure that the Customer s Unmetered Installation complies at all times with the Regulations and any statutes, statutory instruments, regulations or orders which are binding on the Customer. 9.2 Except where expressly provided in writing by the Company to the contrary, neither by inspection, if any, or failure to reject, nor in any other way, does the Company give any warranty, expressed or Legal File Reference PR/CN/024X Page 15/30

16 implied, as to the adequacy, safety or other characteristics of the Customer's Unmetered Installation and the Company shall not be responsible therefore. 9.3 The Customer hereby acknowledges that because the Company may use switchgear with autoreclosing facilities, the Customer s Unmetered Installation will be designed and constructed so as not to suffer damage through the operation of such facilities and otherwise in accordance with Good Industry Practice and that the Company accepts no liability for such damage to the extent (if any) such damage is attributable to the Customer's failure to so design and construct the Customer's Unmetered Installation. 9.4 If the Customer takes a supply of electricity from the Distribution System for the operation of any equipment which during the normal operation of the Distribution System adversely affects or impairs voltage regulation or impairs the supply of electricity to the Customer or other persons supplied from the Distribution System (or in the reasonable opinion of the Company is likely so to do), the Customer shall at its own expense take such steps as, in the reasonable opinion of the Company, are necessary to prevent such consequences and if such consequences are not remedied within a reasonable time of the Company giving notice to the Customer the Company may at any time thereafter De-energise the relevant Exit Point) and the Customer pay to the Company on demand all Costs and losses suffered by the Company. 9.5 Unless otherwise provided for by the Regulations then subject to Clause 11 the Customer shall not connect directly or indirectly any generating plant or any alternative source of electrical energy to the Distribution System without the prior written consent of the Company, which will not be unreasonably delayed or withheld and such consent if granted may be conditional upon inter alia the Customer agreeing Technical Conditions as shall be set out in Schedule 6. Where the Customer possesses an emergency back-up electricity generation facility, it may utilise such facility at such times as a supply of electricity is not available from the Distribution System PROVIDED that it first isolates its generating plant from the Distribution system by De-Energising the relevant Exit Point. 9.6 Where the Customer is provided with an alternative connection to an Exit Point from the Company's Distribution System the alternative connection may be Energised only after first De-energising the previous connection by a method agreed with the Company. Where the Customer s Unmetered Installation is permanently connected to more than one Exit Point, the Customer shall at its expense ensure that there does not exist within the Customer's Unmetered Installation the facility to parallel across more than one Exit Point. 9.7 To the extent that any items of the Customer's Unmetered Installation fail to comply with the hours of operation or Profile assigned to them under Schedule 2, the Customer shall remedy such failure within five Business Days of the day it becomes or ought to have become aware of such failure. 9.8 Subject to Clause 11 the Customer shall not Connect or permit to be Connected any Mainsborne Communications to the Customer s Unmetered Installation whose purpose is to intentionally transmit communications and/or data to or receive communications and/or data from the Distribution System directly or indirectly without the prior written consent of the Company and such consent if granted may be conditional upon inter alia the Customer agreeing Technical Conditions as shall be set out in Schedule If the Customer operates any equipment, including inter alia Mainsborne Communication within the Customer s Unmetered Installation intended for transmitting analogue or digital communications and/or data solely within the Customer s Unmetered Installation, which by its connection through the Customer s Unmetered Installation to the Distribution System adversely affects or causes the failure of the Company or any other party whether or not connected to the Distribution System to comply at all times with the Regulations and any statutes, statutory instruments, regulations or orders as apply to those parties from time to time (or in the reasonable opinion of the Company may do so) the Customer shall, at its own expense, remedy the condition in a manner deemed adequate in the reasonable opinion of the Company and if the condition is not remedied within the specified time, by the Company in its notice to the Customer of such condition the Company may at any time De- Energise the Exit Point until such condition has been so remedied and the Customer shall pay to the Company the full amount of all reasonable costs, losses and expenses caused to the Company effecting such De-Energisation and/or by the adverse effects or failure to comply aforesaid. Legal File Reference PR/CN/024X Page 16/30

17 9.10 If, in relation to any Exit Point, the Customer fails to comply with Clauses 9.4 to 9.9 inclusive the Company may De-Energise the relevant Exit Point until the failure has been remedied. The Customer shall pay to the Company on demand the Costs of any such De-Energisation and any subsequent re- Energisation. If the Customer is unable to remedy the situation within a reasonable time, the Company may require a Modification to be made to the Company's Equipment and/or the Customer's Unmetered Installation Each Party shall as soon as it becomes aware of the same notify the other Party in writing of any damage to any part of the other Party's equipment (being the Customer's Unmetered Installation or the Company's Equipment) and shall provide in writing to the other Party (as soon as reasonably possible after the other Party has requested the same) such information relating to the incident giving rise to such damage as the first Party has in its possession, under its control or can obtain on exercising reasonable efforts Where the Company's Equipment is contained within, or adjacent to and directly associated with the Customer's Unmetered Installation, the Customer shall be liable for the replacement of any Company's Equipment which has been damaged which arises from damage to the Customer's Unmetered Installation provided that the liability of the Customer in respect of the Company's Equipment pursuant to this Clause 9.10 shall not exceed 1,000,000 per event. 10. POWER FACTOR AND PHASE BALANCE 10.1 Where required by the Company, the Customer shall at all times maintain the power factor of any supply of electricity at or as near to unity as practicable but not less than 0.95 leading and 0.85 lagging and the Customer shall comply at its own expense with such requirements as the Company may make as to the installation by the Customer of such Plant and Apparatus as may be necessary to ensure that the power factor of such supply is not less than Where a supply of electricity is provided in two or more phases, the Customer shall ensure as far as it is reasonably practicable to do so that the demand is at all time balanced between the phases If the Customer fails to comply with Clause 10.1 or 10.2 the Company may in its reasonable discretion De-energise the relevant Exit Point until the causes of the failure are remedied, and the Customer shall pay to the Company on demand the Cost of any such De-Energisation and any subsequent re- Energisation. If the Customer is unable to remedy the situation within a reasonable time, the Company may require a Modification to be made to the Company's Equipment and/or the Customer's Unmetered Installation. 11. MODIFICATIONS 11.1 Subject to Clause 8, no Modification may be made by or on behalf of either Party otherwise than in accordance with the provisions of this Clause Where the Customer wishes to make a Modification it shall complete and submit to the Company an application for a modification in such form and with such content as the Company reasonably may require from time to time. The Company will respond to the Customer s application for a Modification in accordance with the statement issued by it under Condition 13 of its licence The Company shall have no obligation to compensate the Customer for the cost and expense of any Modification required to be made by the Customer to its Plant and/or Apparatus as a result of any Modification by the Company Each Party may apply to the Authority if the Customer and the Company cannot agree terms for a Modification. In such an event, the Party applying to the Authority shall give prior written notice to the other Party. Legal File Reference PR/CN/024X Page 17/30

18 12. RIGHTS OF ACCESS 12.1 Each Party shall procure that the employees and/or agents and/or sub-contractors and/or invitees of the other Party for whom such access is necessary in the normal course shall at all times be entitled to gain access to the Customer's Unmetered Installation either through the Customer's or the Company's Premises (as the case may be) at convenient times (except in the case of emergency) where reasonably necessary for the purpose of carrying out modification works under Clause 11 and inspecting, testing, repairing, renewing, maintaining, isolating, protecting or removing the Company's Equipment, Monitoring Equipment or the Customer's Unmetered Installation or any part thereof, reading of meters, interrogating Monitoring Equipment and Arrays and lawfully Disconnecting or De- Energising the relevant Exit Point and for any other purpose required for the operation of the Distribution System and shall be given safe and unobstructed access thereto. In particular the provisions as to rights of access specified in paragraphs 5, 6, 7 and 8 of Schedule 6 to the Act shall apply to this Agreement in so far as access is required by the Company. Any individuals to whom access is given pursuant to this Clause 12 shall comply with all reasonable directions given by the Company or the Customer (as the case may be) and its appropriately authorised employees and agents as to general safety and site security requirements The Customer grants the Company unrestricted access to and use of the Customer s Unmetered Installation, without charge, to supply such third parties as the Customer has agreed or may agree in writing to connect to the Customer's Unmetered Installation. 13. METERING AND OTHER EQUIPMENT 13.1 The Company may make such arrangements as it considers appropriate for the metering or measuring or calculating the amount of any supply of electricity which passes through any Exit Point The Customer shall at all times permit the Company to install such metering equipment or other measuring and monitoring equipment as the Company reasonably may require from time to time on the Customer's Unmetered Installation or the Customer's Premises and shall allow the Company access to such equipment in accordance with the provisions of Clause 12 and shall refrain from interfering with such equipment and the immediate connections to such equipment in accordance with the provisions of Clause In the case of Unmetered Supplies which are subject to Half-Hourly Trading, the Customer at all times shall permit the Company free and unrestricted access to and use of any information or data relating to the calculation of the consumption of electricity by the Customer's Unmetered Installation. The Customer shall procure that the Meter Administrator, if it is not the Company, shall comply with the provisions of this Clause as if it were the Customer The Parties acknowledge that any measuring or monitoring equipment installed pursuant to this Agreement, the Unmetered Supplies Procedure or the BSC may not constitute or comprise a meter as defined in the Act or other relevant legislation. 14. ASSIGNMENT AND SUB-CONTRACTING 14.1 (a) Subject to Clauses 14.1(b) and (c), neither Party shall assign any of its rights under this Agreement without the prior written consent of the other party, such consent not to be unreasonably withheld. (b) (c) Either Party may assign or charge its benefit under this Agreement in whole or in part by way of security. The Company may assign any of its rights and/or obligations under this Agreement to any member of its group (as defined in section 53 of the Companies Act 1989) without the consent of the Customer. Legal File Reference PR/CN/024X Page 18/30