Dangers of Hot Work: Key Lessons from CSB Investigations
|
|
- Amberly Mason
- 6 years ago
- Views:
Transcription
1 2017 NFPA Conference & Expo Dangers of Hot Work: Key Lessons from CSB Investigations Presented by: Samuel A. Oyewole, PhD. Office of Investigations U.S. Chemical Safety Board Washington, DC 1
2 Disclaimer This presentation is given by Dr. Samuel A. Oyewole, Chemical Incident Investigator at the United States Chemical Safety and Hazard Investigation Board on June 4, 2017, to the public audience at the National Fire Protection Association Conference & Exposition is for general informational purposes only. Users of this presentation should also note that the contents were compiled solely for this presentation. The presentation is, the view of, Dr. Oyewole. References, conclusions or other statements about current CSB investigations may be preliminary and may not represent a formal, adopted product or position of the Board. For information on completed CSB investigations, please refer to the final printed versions on the CSB website: 2
3 Presentation outline Overview of the Chemical Safety Board CSB Hot Work Investigations Update CSB Hot Work Investigation Key Lessons CSB Hot Work Safety Video Good Practice Guidelines Existing Codes, Standards and Regulatory Requirements Conclusion Questions and Answers 3
4 CSB Overview Independent, non-regulatory U.S. federal agency charged with investigating chemical accidents and hazards Investigates major chemical accidents Conducts scientific root cause investigations Conducts safety studies Modeled after the National Transportation Safety Board (NTSB) 4
5 CSB Overview Five-member board Presidential appointment Senate confirmation Five year terms Staff positions Investigators Recommendations Outreach 5
6 CSB Incident Selection Public fatalities & injuries Employee fatalities & injuries Public evacuation or nuisance External property damage Internal property damage Ecosystem damage Potential for greater consequences Potential for learning Public/Stakeholder concern Company or facility history Congressional request 6
7 CSB Investigation Process Conduct interviews Collect evidence and test equipment Publicize key findings (preliminary and final) and lessons learned E.g. public meetings, full report, case study, video Issue recommendations to improve safety and for prevention. 7
8 CSB Investigation Update (Hot Work Incidents)
9 Presentation Goals 1. To Understand the hazards associated with hot work The importance of monitoring the atmosphere in the work area before and during hot work Site-specific training on the hazards of hot work and supervision during hot work. 2. To provide information on how you can safely apply the lessons learned from these cases to your site.
10 What is Hot Work? NFPA 51B (2014 Edition) defines hot work as: (w)ork involving burning, welding, or a similar operation that is capable of initiating fires and explosions. Hot work includes other activities with the potential to create a source of ignition such as cutting, brazing, grinding, and soldering
11 Hot Work Work involving burning, welding, or a similar operation that is capable of initiating fires or explosions. Hot work also includes other activities with the potential to create a source of ignition such as cutting, brazing, grinding, and soldering. Workers are at risk in the oil and gas industry, but also in many other sectors within general industry, such as food production, paper, and wastewater treatment.
12 Hot Work Sources: yandhealth/hotworkpermits.php
13 Hot work incidents continue to occur Sunoco Logistics, 2016 Motiva Enterprises, 2001
14 CSB Hot Work Investigations & Deployments Deployment/Investigation Location Date Consequence Motiva Enterprise Refinery Bethune Point Wastewater Plant Delaware City, Delaware Daytona Beach, Florida July 17, 2001 January 11, fatality/8 injuries 2 fatalities/1 injury Partridge-Raleigh Oilfield Raleigh, Mississippi June 5, fatalities/1 injury Packaging Corporation of America Tomahawk, Wisconsin July 29, fatalities/1 injury MAR Oil La Rue, Ohio October 19, fatalities EMC Use Oil Corporation Miami, Florida December 2, fatality/1 injury ConAgra Foods, Boardman Boardman, Oregon February 16, fatality Lessons Not Learned A.V. Thomas Produce Atwater, California March 31, injuries TEPPCO Partners, LP Garner, Arkansas May 12, fatalities E.I. DuPont de Nemours & Co. Inc. Buffalo, New York November 9, fatality/1 injury Long Brothers LLC El Dorado, Arkansas May 21, fatalities Omega Protein Moss Point, Mississippi July 28, fatalities
15 Hot Work Incident Screening Employees Contractors Total Significant Injuries Fatalities relevant incidents recorded between % 26% 55 gal drums Oil field type tanks Vehicle Fuel tanks 7% 15% 19% Tanker trucks Other
16 Hot Work Safety Bulletin Available at:
17 CSB Investigation Key Lessons 1. Use Alternatives Whenever possible, avoid hot work and consider alternative methods. Use of cold work Designated hot work area Remove/isolate flammable materials Bethune Point Wastewater Plant Explosion, 2006
18 CSB Investigation Key Lessons 2. Analyze the Hazards Prior to the initiation of hot work, perform a hazard assessment that identifies the scope of the work, potential hazards, and methods of hazard control. Packaging Corporation of America,
19 CSB Investigation Key Lessons 3. Monitor the Atmosphere Conduct effective gas monitoring in the work area using a properly calibrated combustible gas detector prior to and during hot work activities, even in areas where a flammable atmosphere is not anticipated.
20 CSB Investigation Key Lessons 4. Test the Area In work areas where flammable liquids and gases are stored or handled, drain and/or purge all equipment and piping before hot work is conducted. EMC Used Oil Corporation, 2008
21 CSB Investigation Key Lessons 5. Use Written Permits Ensure that qualified personnel familiar with the specific site hazards review and authorize all hot work and issue permits specifically identifying the work to be conducted and the required precautions. MAR Oil,
22 CSB Investigation Key Lessons 6. Train Thoroughly Train personnel on hot work policies/procedures, proper use and calibration of combustible gas detectors, safety equipment, and job specific hazards and controls in a language understood by the workforce. ConAgra Foods,
23 CSB Investigation Key Lessons 7. Supervise Contractors Provide safety supervision for outside contractors conducting hot work. Inform contractors about site-specific hazards including the presence of flammable materials. Partridge Raleigh Oilfield, 2006
24 Good Practice Guidelines Gleaned From Industry Standards and Regulations April 14, 2017 Note [to be deleted]: This image may be replaced with a grayscale image of the subject facility.
25 Good Practice Guidelines Avoid hot work when possible. Consider all alternative methods to hot work... Source:
26 Good Practice Guidelines American Petroleum institute (API) Recommended Practice 2009 Safe Welding, Cutting and Hot Work Practices in the Petroleum and Petrochemical Industries p. 13 states: (t)he permit process should indicate who is responsible for inspecting the work site, conducting gas testing, and approving the permit allowing hot work to be done.
27 Good Practice Guidelines American Petroleum institute (API) Recommended Practice 2009 Safe Welding, Cutting and Hot Work Practices in the Petroleum and Petrochemical Industries, p. 12 states: (a) competent person using an appropriate combustible-gas meter should perform tests to determine flammable vapor concentrations before hot work is started. An oxygen reading is needed before doing flammability testing for confined spaces.
28 Good Practice Guidelines The National Fire Protection Association s Standard for Fire Prevention During Welding, Cutting and Other Hot Work, NFPA 51B (2014 Edition) requires: training on safe operation of the equipment and in the safe use of the process, Furthermore: (d)evelop a hot work training curriculum for all management, full time and temporary employees, and contractors.
29 Good Practice Guidelines Industrial research shows the risk of fire can increase over 100% when outside contractors are involved in hot work without facility supervision.
30 Good Practice Guidelines Protect all permanent storage tanks or piping (that cannot be moved or drained) against physical contact and heat from hot work equipment. Preferably all equipment that is within reach of the hot work equipment (grinder, welding rod holder, cutting torch, etc.) will be drained, purged and inerted. Source: assive-flash-fire-during-welding-of.html
31 Existing Codes and Statutes OSHA 29 CFR Welding, Cutting, and Brazing- General Requirements OSHA 29 CFR Process Safety Management of Highly Hazardous Chemicals NFPA 1 Uniform Fire Code (2015) ICC International Fire Code (2015)
32 OSHA , NFPA 51B Welding, Cutting and Brazing Proscriptive not Preventative Ex: (a)(1)(ii) Guards. If the object to be welded or cut cannot be moved and if all the fire hazards cannot be removed, then guards shall be used to confine the heat, sparks, and slag, and to protect the immovable fire hazards.
33 NFPA 326, 2015 Edition Standard for the Safeguarding of Tanks and Containers for Entry, Cleaning, or Repair. Requirements for testing before and during hot work and continuous or periodic monitoring by qualified personnel. Not incorporated by reference in federal standards.
34 Conclusion CSB has continued to advocate for best practices and recommended improvements of consensus standards, specifications, recommended practices, technical reports and codes to address hot work activities. Recently provided comments to NFPA for the next edition of NFPA 51B
35 Conclusion CSB has continued to push for the adoption of its recommendations aimed at preventing hot work incidents Emphasizing the need for increased hot work hazard awareness Stronger oversight and responsibility for hot work activities. Designated safe hot work practices as a Driver of Critical Chemical Safety Change Program
36 U.S. Chemical Safety Board 1750 Pennsylvania Ave, NW Suite 910 Washington, DC
37 2017 NFPA Conference & Expo CEUs: To receive CEUs for this session, scan your badge at the back of the room before leaving Evaluation: Complete a session evaluation on the mobile app. (Search app store for NFPA 2017 C&E. ) Handouts: Handouts will be available via the mobile app and at nfpa.org/conference Recordings: Audio recordings of all sessions will be available free of charge via NFPA Xchange.
Hot Work Safety and the Permitting Process. Leaders Guide and Quiz
! Hot Work Safety and the Permitting Process Leaders Guide and Quiz 4879 INTRODUCTION TO THE PROGRAM Structure and Organization Information in this program is presented in a definite order so that employees
More informationHOT WORK PROGRAM OSHA
HOT WORK PROGRAM 1910.252 OSHA Table of Contents Purpose... 3 Definitions... 3 Responsibilities... 3 Hot Work Permitted Locations... 5 Fire Prevention Precautions... 5 Personal Protective Equipment...
More information"HOT WORK SAFETY AND THE PERMITTING PROCESS"
PRESENTER'S GUIDE "HOT WORK SAFETY AND THE PERMITTING PROCESS" Part of the "SAFETY MEETING KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS OUTLINE
More informationRoger Williams University Hot Work Plan
Roger Williams University Hot Work Plan Roger Williams University Dept. Of Environmental Health and Safety One Old Ferry Road Bristol, RI 02809 Adopted: April 26, 2011(President s Cabinet) Roger Williams
More informationKENNECOTT UTAH COPPER
16.1.1 INTRODUCTION 16.1.1.1 The purpose of this standard is to define the requirement for performing hot work operations on certain components of machinery, equipment and structures and preventing the
More informationUniversity of Central Missouri Hot Work Permit Program
1. Introduction University of Central Missouri Hot Work Permit Program The University of Central Missouri's (UCM) Hot Work Program is designed to minimize risks to our campus community, which includes
More informationThe Ohio State University. Hot Work Permit Program (Welding, Cutting and Brazing)
Environmental Health & Safety 1314 Kinnear Rd. Columbus, Ohio 43212 Phone (614) 292-1284 Fax (614) 292-6404 http://www.ehs.osu.edu/ The Ohio State University Hot Work Permit Program (Welding, Cutting and
More information(WELDING, CUTTING, AND OPEN FLAME WORK)
THE UNIVERSITY OF TEXAS AT TYLER Hot Work (WELDING, CUTTING, AND OPEN FLAME WORK) Program 2016 Table of Contents 1. INTRODUCTION... 3 2. PURPOSE... 3 3. APPLICATION... 3 4. DEFINITIONS... 3 5. PROGRAM
More informationKENNECOTT UTAH COPPER
16.1.1 INTRODUCTION 16.1.1.1 The purpose of this standard is to define the requirement for performing hot work operations on certain components of machinery, equipment and structures and preventing the
More informationSAFETY AND HEALTH STANDARD HOT WORK PERMIT Effective Date: 06/10/10 Standard: 16.1 Document Number: KUCSH0040 Rev: 04
16.1.1 INTRODUCTION 16.1.1.1 The purpose of this standard is to prevent the inadvertent ignition of combustible materials when performing hot work. 16.1.2 DEFINITIONS 16.1.2.1 Hot work - includes welding,
More informationRUTGERS UNIVERSITY HOT WORK PERMIT PROGRAM
RUTGERS UNIVERSITY HOT WORK PERMIT PROGRAM REV 12/99 1 TABLE OF CONTENTS HOT WORK PERMIT PROGRAM A. Purpose and Scope.3 B. Hot Work Permit Procedures...3 C. Hot Work Permit - Prohibited Conditions...4
More informationHot Work Permit Program
Environmental Health and Safety Office Hot Work Permit Program Permitting Process for welding, cutting and brazing. Adopted: March 6, 2007 Revised: 7/18/16 http://www.stlawu.edu/environmentalhealth-and-safety/environmental-healthand-safety-policies
More informationHot Work Program June 2017
Hot Work Program June 2017 Hot Work Program TABLE of CONTENTS I. General Information II. Definitions III. Roles and Responsibilities IV. Hot Work Areas V. Hot Work Permit VI. Hot Work Permit-Not Required
More informationDesert Research Institute Hot Work Permit Program
1.0 INTRODUCTION 1.1 PURPOSE The purpose of this policy is to prevent any fires that may result from hot work processes. 1.2 SCOPE 1.2.1 For the purposes of this policy, hot work is defined as any temporary
More informationSUNY Geneseo ENVIRONMENTAL HEALTH & SAFETY
Revision No.: 1 Page 1 of 7 I. PURPOSE The purpose of this policy is to establish minimum standards for safely conducting hot work tasks to help mitigate hazards that could occur during hot work operations.
More informationAreas that have been designed and constructed for performing open-flame or spark-producing work.
PURPOSE Baylor University recognizes that there is a potential for injury to people and damage to property that can result from fire or sparks that arise when hot work is performed outside of a designated
More informationRUTGERS UNIVERSITY HOT WORK PERMIT PROGRAM
RUTGERS UNIVERSITY HOT WORK PERMIT PROGRAM REV 10/2015 TABLE OF CONTENTS HOT WORK PERMIT PROGRAM Contents A. PURPOSE AND SCOPE... 3 B. HOT WORK PERMIT PROCEDURES... 3 C. HOT WORK PERMIT PROHIBITED CONDITIONS:...
More informationHot Work Program. Program Origination: October, 2017
Hot Work Program Program Origination: October, 2017 Contact Personnel: Jason Kayser, Fire & Safety Specialist Jason.kayser@uni.edu 319-273-2004 Hot Work Program UNI Employees & Contractors October, 2017
More informationHot Work Safety Program
Hot Work Safety Program 6900-2.0 Associated OHS Process: General Industry & Construction Safety The master copy of this document resides in electronic format. Printed copies of this document are for convenience
More informationMCW s Hot Work Permit Program
2019 MCW s Hot Work Permit Program - Hot Work/Fire Watch Operations This document is the Medical College of Wisconsin s (MCW) written program for conducting hot work, and identifies roles and responsibilities
More informationTAMPA ELECTRIC COMPANY ENERGY SUPPLY HOT WORK PERMITTING PROGRAM
TABLE OF CONTENTS TITLE PAGE # PURPOSE / INTRODUCTION 1 RESPONSIBILITY 2 EMPLOYEE TRAINING AND DOCUMENTATION 3 PROGRAM REQUIREMENTS 4 HOT WORK PERMIT PLANNING AND PRECAUTIONS 4 6 FIREWATCH 6, 7 HOT WORK
More informationHOT WORK PERMIT PROGRAM REVISED AND DISTRIBUTED BY: THE UNIVERSITY OF VERMONT DEPARTMENT OF PHYSICAL PLANT TRAINING & COMPLIANCE OFFICE
University of Vermont Department of Physical Plant Burlington, Vermont HOT WORK PERMIT PROGRAM REVISED AND DISTRIBUTED BY: THE UNIVERSITY OF VERMONT DEPARTMENT OF PHYSICAL PLANT TRAINING & COMPLIANCE OFFICE
More informationOFFICE OF STATE HUMAN RESOURCES
OFFICE OF STATE HUMAN RESOURCES NUMBER: HWP-1 TOTAL PAGES: 6 SUBJECT: Hot Work Program Effective Date: Revision Date: Revision #: RELATED LEGISLATION: This program outlines procedures for [Agency/University]
More informationHot Work Procedures. Competent means possessing knowledge, experience and training to perform a specific duty.
Hot Work Procedures Purpose This procedure will provide the knowledge and equipment required to minimize the identified workplace hazards associated with Hot Work. These procedures will provide: information
More informationDUQUESNE UNIVERSITY HOT WORK PROGRAM
DUQUESNE UNIVERSITY HOT WORK PROGRAM Prepared by: Environmental Health and Safety Department TABLE OF CONTENTS Page Purpose 1 Scope 1 Responsibilities 2 General Requirements 2 Welding or Cutting Containers
More informationHot Work Program. Purpose of Procedure:
BGSU Hot Work Program Page 1 Bowling Green State University Purpose of Procedure: Hot Work Program These procedures have been established to comply with Ohio s Public Employee Risk Reduction Act, the OSHA
More informationIWU PHYSICAL PLANT SAFETY PROGRAM
STANDARDS Welding, Cutting and Brazing/General Requirements OSHA 1910.252, 1. Purpose Hot work is any temporary or permanent operation involving open flames or producing heat and/or sparks. This includes
More informationHot Work Program. SUNY Canton. Purpose
SUNY Canton Hot Work Program Purpose Hot Work is defined as welding, thermite welding, thermal spraying, installation of torch applied roof systems, cutting, soldering, brazing, grinding, thawing pipe
More informationHOT WORK GUIDELINES 3. MANDATORY AREAS REQUIRING HOT WORK PERMITS Within the Service Station Site
1. GENERAL This procedure gives guidelines for the precautions and preparation that should be followed to ensure that work covered by a hot work permit can be carried out safely without risk to people
More informationPURPOSE:... 3 EMPLOYEE CLASSIFICATIONS:... 3 OUTSIDE PERSONNEL (I.E., CONTRACTORS):... 4 HOT WORK REQUIREMENTS:... 4 EMPLOYEE TRAINING:...
South Central College North Mankato/Mankato Campus 1920 Lee Boulevard N. Mankato, MN 56002-1920 Faribault Campus 1225 Third Street SW Faribault, MN 55021-5782 Adoption Date: 09-18-15 Revision Date: 02-23-17
More informationVillanova University Department of Environmental Health and Safety Policy and Procedure Manual
Villanova University Department of Environmental Health and Safety Policy and Procedure Manual Subject: Hot Works Procedure Number: S15 Effective: 20 Apr 99 Revised: 9-15-15 I Purpose: To establish a procedure
More informationHOT WORK MANAGEMENT PROGRAM
HOT WORK MANAGEMENT PROGRAM Rose-Hulman Institute of Technology Table of Contents SECTION 1.0 Purpose 2.0 Regulatory Reference 3.0 Scope 4.0 Elements of the Program 5.0 Responsibility 6.0 Training and
More informationHot Work Permit Guidelines
2408 Wanda Daley Drive Ames, Iowa 50011-3602 (515) 294-5359 www.ehs.iastate.edu Copyright 2014 Reviewed 2015 2 Hot Work Permit Guidelines Directory of Service and Emergency Providers Services Environmental
More informationEnvironmental, Health and Safety. UNC Charlotte Hot Work Program (Welding, Cutting, and Brazing)
Environmental, Health and Safety UNC Charlotte Hot Work Program (Welding, Cutting, and Brazing) January 2014 TABLE OF CONTENTS PURPOSE:... 2 SCOPE:... 2 HOT WORK RESPONSIBILITIES... 2 SPECIFIC DEPARTMENTAL
More informationHot Work Permitting Program
Hot Work Permitting Program Environmental Health, Safety, and Risk Management Department Box 6113, SFA Station Nacogdoches, Texas 75962-6113 Original: January 2004 Revised: January 2011, April 2018 Table
More informationSTANDARD PROCEDURE INSTRUCTION
STANDARD PROCEDURE INSTRUCTION Title SPI Department Hot Work Permit Supersedes SPI Dated # 34-3 Effective Date Safety, Health and Environment Dec 22, 2014 Jan 19, 2016 Hot Work Permit 1. PURPOSE 1.1 To
More informationHot Work Permit Program
Hot Work Permit Program 1 2 TABLE OF CONTENTS Section Title Page 1.0 Scope 3 2.0 Standards and Regulations Involved/Target Groups 3 3.0 Responsibilities 4 4.0 Training.. 5 5.0 Recordkeeping. 5 6.0 Permits
More informationHOT WORK SAFETY GUIDE. Specific responsibilities relating to hot work operations are outlined below.
HOT WORK SAFETY GUIDE Version Date Comments 5 March, 2012 Revised document 6 June, 2015 Update code citation - SFPC 2012 A. INTRODUCTION The purpose of this Guide is to provide information regarding welding
More informationGeneral Hot Work Program Guidelines. Lyndsey Beaudin
General Hot Work Program Guidelines Lyndsey Beaudin WHY SUCH A HOT TOPIC? NEW YORK STATE OFFICE OF FIRE PROTECTION AND CONTROL Violation: Hot Work Permit not issued for Hot Work Area 2603.4 Hot Work Program
More informationRisk Control Guide HOT WORK
HOT WORK RCG003 (E)-v2-01/2017 Page 1 2017 Royal & Sun Alliance Insurance plc Introduction Hot work is defined as any operation that involves open flames or produces heat or sparks, e.g. cutting, grinding,
More informationHot Work. Approved by: Ruth Hampton Review Date: 6 th December 2015
5 WHS PROCEDURE P28-01 Page 1 of 7 Issue: 2 1. Intent The Salvation Army Australia Eastern Territory (TSA-AUE) is committed to the provision of a safe, healthy and injury free environment for all persons
More informationMaking sense of risk Risk engineering. Marine hot work Permit to Work (PTW) systems
Marine hot work Permit to Work (PTW) systems Marine hot work Permit to Work (PTW) systems Hot work is any operation involving open flames or producing heat and/or sparks, including but not limited to welding,
More informationHot Work Policy & Procedure
Hot Work Policy & Procedure Policy: Reference: The purpose of the PCS General Contractor Hot Work policy is to protect personnel and property from a fire caused by hot work. The PCS Hot Work procedure
More informationUniversity of Nevada, Reno
University of Nevada, Reno HOT WORK PERMIT PROGRAM Program Contact Person: John A. Braun, CSP Environmental Health and Safety University of Nevada, Reno Phone: 775-784-6478 HOT WORK PERMIT PROGRAM UNIVERSITY
More informationPermit to Work Procedure
1. Purpose The permit to work procedure provides a system for managing certain high risk activities at NT Airports sites. The purpose of this procedure is to: 2. Scope Provide a level of control to ensure
More informationFire safety basics for hot work operatives. CFPA-E Guideline No 12:2012 F
Fire safety basics for hot work operatives CFPA-E Guideline No 12:2012 F FOREWORD The European fire protection associations have decided to produce common guidelines in order to achieve similar interpretation
More informationHot Work and Welding Management Procedures Attached to FIN-INS Introduction. 1.1 Purpose
1. Introduction 1.1 Purpose Hot Work and Welding Management Procedures Attached to FIN-INS-22 Indiana University Insurance, Loss Control and Claims (INLOCC) and Indiana University Environmental Health
More informationHot Work Program. Roles and Responsibilities. Management. PAI Responsibilities
Hot Work Program Scope is aware of the hazards associated with hot work operations (cutting, welding, brazing and soldering, grinding, etc.) is committed to keeping our employees safe and to control hazards
More informationGuide to Hot Work NFPA 51B Understanding the new requirements after July 1, 2018
Guide to Hot Work NFPA 51B Understanding the new requirements after July 1, 2018 What is the issue that caused the change? Unpermitted hot work was determined to be the cause of a fire that killed two
More informationRISKTOPICS. DISCUSSION For the purposes of this document, hot work: Management practices: Hot work Property and Business Interruption January 2013
RISKTOPICS Management practices: Hot work Property and Business Interruption January 2013 This document highlights the property conservation responsibilities of those who utilize hot work outside of areas
More informationPRO Hot Work
MS&L Procedure PRO-4.5-0001-1-07 Hot Work Version: 3 Authorised by: Tom Angliss & Owen Quake Authorisation Date: 21/11/2017 This document has been approved for release and changed as per the associated
More informationFire caused by Hot Works. A guide to loss prevention
Fire caused by Hot Works A guide to loss prevention Hot Work is usually defined as any open flame, spark or heat producing activity and is typically associated with cutting, welding, grinding and brazing
More informationHOT WORK PROGRAM October 2016
HOT WORK PROGRAM October 2016 A. SCOPE AND APPLICATION The UNLV Hot Work Program is established in accordance with the standards listed in Section H and specifies the requirements and procedures necessary
More informationHOT WORK PERMIT PROGRAM AUBURN UNIVERSITY RISK MANAGEMENT & SAFETY
HOT WORK PERMIT PROGRAM AUBURN UNIVERSITY RISK MANAGEMENT & SAFETY WHAT IS HOT WORK? WORK INVOLVING BURNING, WELDING, OR A SIMILAR OPERATION THAT IS CAPABLE OF INITIATING FIRES OR EXPLOSIONS. EXAMPLES
More informationHOT WORK PERMIT PROGRAM AUBURN UNIVERSITY SAFETY AND HEALTH RISK MANAGEMENT AND SAFETY
HOT WORK PERMIT PROGRAM AUBURN UNIVERSITY SAFETY AND HEALTH RISK MANAGEMENT AND SAFETY WORK INVOLVING BURNING, WELDING, OR A SIMILAR OPERATION THAT IS CAPABLE OF INITIATING FIRES OR EXPLOSIONS. WHAT IS
More informationHot Work Procedure. Work Health and Safety Policy Responsible Officer. Executive Director, Infrastructure Services and Development Approved by
Hot Work Procedure Related Policy Work Health and Safety Policy Responsible Officer Executive Director, Infrastructure Services and Development Approved by Executive Director, Infrastructure Services and
More informationFire Safety & Hot Work Permits. Oakland University Office of EH&S
Fire Safety & Hot Work Permits Oakland University Office of EH&S Topics of Discussion Why do we Need a Hot Work Permit Real-life Cutting/Welding Accidents When is a Hot Work Permit Required Hot Work Precautions
More informationPrevention of Hot Work Fires in Healthcare Facilities. Sherie Van Slyke Engineering Specialist
Prevention of Hot Work Fires in Healthcare Facilities Sherie Van Slyke Engineering Specialist Are hot work fires common in hospitals? What is hot work? Hot work statistics The contractor component. Construction
More informationPublic Input No. 17-NFPA 51B-2015 [ Global Input ] Statement of Problem and Substantiation for Public Input. Related Public Inputs for This Document
of 55 11/18/2016 2:12 PM Public Input No. 17-NFPA 51B-2015 [ Global Input ] 3.3.X Responsible Party. The building owner, a lessee, or a duly authorized representative. Globally change "management" everywhere
More informationNon Electrical Hot Work Program
Environmental Health and Safety Name: Non Electrical Hot Work Program Date Created: 02/18/2014 Date Revised: Created By: Bob Happel PURPOSE The purpose of this Program is to protect people and property
More informationSupersedes: 2/16 (Rev.10) Preparer: Owner: Approver: EHS Team Member EHS Team Member EHS Manager
Procedure No.: PA-020-0002 Page: 1 of 29 Preparer: Owner: Approver: EHS Team Member EHS Team Member EHS Manager Document Revision Change Table Revision Number Revision Description Revised By Revision Date
More informationUniversity Environmental Health and Safety. Hot Work Permit Program
University Environmental Health and Safety Hot Work Permit Program 1 2 TABLE OF CONTENTS Section Title Page 1.0 Scope 3 2.0 Standards and Regulations Involved/Target Groups 3 3.0 Responsibilities 4 4.0
More informationCHAPTER 1 GENERAL. 1
MINISTERIAL REGULATION ON THE PRESCRIBING OF STANDARD FOR ADMINISTRATION AND MANAGEMENT OF OCCUPATIONAL SAFETY, HEALTH AND WORK ENVIRONMENT IN CONFINED SPACE B.E. 2547 -------------------------------------
More informationDRAFT Hot Work Procedure South Shore Regional School Board
Hot Work Procedure South Shore Regional School Board SSRSB Hot Work Procedure - 2010 Page 1 of 12 Introduction DRAFT Hot work comes in a variety of applications each with its own heat source severity.
More informationPRO Hot Work
MS&L Procedure PRO-4.5-0001-1-07 Hot Work Document Owner: Bill Kruesi HSSE Manager - Asset Mgmt. Owen Quake ANZ Engineering Authority Approved By: Bill Kruesi HSSE Manager - Asset Mgmt. Control of Work
More informationThis program applies to University faculty, staff, students, vendors, or contractors performing Hot Work on behalf of the University of Iowa.
University of Iowa Hot Work Loss Prevention Program This program has been approved for use at the University of Iowa and will remain in effect until a revised program is developed and approved. Written:
More informationPRC-SAF-22. Zachary Site. SAFETY POLICIES and PROCEDURES. Hot Work Permit. Revision #3-06/03/2011. Date Reason For Change Changed/Reviewed By
ZACHARY SITE PROCEDURE NUMBER TITLE: PRC-SAF-22 (Hot Work Permit) Page 1 of 20 Rev. 1.7 Date: 06/01/15 PRC-SAF-22 Zachary Site SAFETY POLICIES and PROCEDURES Revision #3-06/03/2011 Hot Work Permit Date
More informationProgram Title Hot Work Program. Classification Fire Safety and Emergency Response. Program No INTRODUCTION
1.0 INTRODUCTION ENVIRONMENTAL HEALTH AND SAFETY PROGRAM MANUAL As part of the Weill Cornell Medical College (WCMC) Environmental Health and Safety (EHS) Program Manual, this has been established. The
More informationSAFEWORK PRACTICES SAFE WORK PERMITTING CAT A-1 SOP #6
SUNCOR ENERGY PRODUCTS DISTRIBUTION TERMINAL OPERATING MANUAL STANDARD OPERATING PROCEDURE SAFEWORK PRACTICES Lifesaving Rules Supporting Document Work with a valid work permit when required. 1.0 PURPOSE
More informationMANUFACTURING TECHNICAL INSTRUCTIONS - SAFETY. To provide instruction for the issue and control of permits authorizing Hot Work operations.
DAIMLERCHRYSLER MANUFACTURING TECHNICAL INSTRUCTIONS - SAFETY Subject: HOT WORK PERMITS ISSUE AND CONTROL OF ISSUE DATE: 6/1/99 EFFECTIVE DATE: 6/1/99 REVIEW DATE. TBD SERIES & NO. SMI - 117 I. PURPOSE
More informationHOT WORK PROCEDURE. A Page 1 of 20
TABLE OF CONTENTS 1. OBJECTIVE...4 2. SCOPE...4 3. DEFINITIONS...4 4. RESPONSIBILITIES...5 5. HAZARD AND RISK ASSESSMENT...5 5.1 PPA Controlled Hot Work Requirements Flow Chart...5 6. HOT WORK PERMIT...6
More informationHot Work Permit Program
Hot Work Permit Program 1 2 TABLE OF CONTENTS Section Title Page 1.0 Scope 3 2.0 Standards and Regulations Involved/Target Groups 3 3.0 Responsibilities 4 4.0 Training.. 5 5.0 Recordkeeping. 5 6.0 Permits
More informationRecord of Revisions. SVP & General Manager, Freeport. Date Revision No. Details of Change
Site Function: Environmental, Health & Standard No.: BCF020.023 Page: Page 1 of 20 Site Representative Manager, Environ., Health & Record of Revisions Date Revision No. Details of Change 05/15/2018 9 4.5.3
More informationHOT WORK SAFETY GUIDELINE
HOT WORK SAFETY GUIDELINE SAFETY GUIDELINE 2017 1 Hot work safety guideline Index 1 Hot work training... 2 2 Purpose of the safety guidelines... 2 3 Binding force of the safety guidelines... 2 4 Definitions...
More informationPermit to Work System Training for Supervisors Managing Hot Works & Other Permits - Presenter s Guide
Permit to Work System Training for Supervisors Managing Hot Works & Other Permits - Presenter s Guide TABLE OF CONTENTS 1.0 PURPOSE... 3 2.0 SCOPE... 3 3.0 RELATED DOCUMENTS... 3 4.0 TRAINING DELIVERY...
More informationHOT WORK 1. PURPOSE 2. SCOPE 3. KEY TERMS
Doc owner: Authorised by: HR Manager WHS Group Executive Human Resources HOT WORK Version PRO-05-11-01 Issue date 08/2017 1. PURPOSE The purpose of this procedure is to provide guidance to David Jones
More informationLoss Prevention Standards
Introduction A hot work management system and associated permit is a formal recorded process used to help control work which is identified as potentially hazardous, and is an important part of an organisation
More informationHot Work. A printed or saved copy is an UNCONTROLLED copy. Check that it is the latest available version before use. Full Review of Document
A printed or saved copy is an UNCONTROLLED copy. Check that it is the latest available version before use. Title: Number: HOT WORK GM-11-036-06 Version Number: 10.0 Date Revised: 11 June 2015 Owner: Authoriser:
More informationAUTORIDAD DEL CANAL DE PANAMÁ EXECUTIVE VICE PRESIDENCY FOR OPERATIONS
AUTORIDAD DEL CANAL DE PANAMÁ EXECUTIVE VICE PRESIDENCY FOR OPERATIONS 3654-A (OPXI) ADVISORY TO SHIPPING No. A-28-2018 August 14, 2018 TO : All Shipping Agents, Owners, and Operators SUBJECT: Revision
More informationSafe Code of Practice. No.05 Hot Works Procedure
Safe Code of Practice No.05 Hot Works Procedure Version: 1.0 Date: 28 TH June 2016 Date: 28/0616 Review Date: 28/06/19 Issue No: 6 Page 1 of 7 INTRODUCTION The aim of this Safe Code of Practice is to give
More informationDOJ s and OSHA s Worker Endangerment Initiative. Civil and Criminal Enforcement Update
DOJ s and OSHA s Worker Endangerment Initiative Civil and Criminal Enforcement Update 8 th Annual Midwest Construction Safety Conference & Expo March 3, 2017 WA 9305594 1 Worker Endangerment Initiative
More informationHot Work Permitting Procedure
Hot Work Permitting Procedure Purpose Audience Policy This procedure is designed to ensure that spark and flame producing construction and maintenance activities do not present an undue fire hazard to
More information. A. report to the security guard B. inform the foreman C. drink more water D. apply for a Permit-to-work.
01 In a shipyard, before you are allowed to carry out any hot work, you must. A. report to the security guard B. inform the foreman C. drink more water D. apply for a Permit-to-work. 02 Which is a good
More informationNC General Statutes - Chapter 95 Article 7A 1
Article 7A. Uniform Boiler and Pressure Vessel Act. 95-69.8. Short title. This Article shall be known as the Uniform Boiler and Pressure Vessel Act of North Carolina. (1975, c. 895, s. 1.) 95-69.9. Definitions.
More informationSubpart A ( General Provisions ) and Subpart B ( Confined and Enclosed Spaces
This document is scheduled to be published in the Federal Register on 10/22/2014 and available online at http://federalregister.gov/a/2014-25147, and on FDsys.gov DEPARTMENT OF LABOR Occupational Safety
More informationTechnical Committee on Tank Leakage and Repair Safeguards
Technical Committee on Tank Leakage and Repair Safeguards NFPA 326 and NFPA 329 Second Draft Web/Teleconference Agenda April 9, 2014, 1:00 PM (EDT) to 2:00 PM (EDT) CALL IN INFORMATION and ONLINE LINK:
More informationPURPOSE To specify the minimum requirements for controlling risks associated with Hot Work activities.
PURPOSE To specify the minimum requirements for controlling risks associated with Hot Work activities. 1 SCOPE This procedure defines Hot Work as any activity that may introduce a source of ignition or
More informationWhat definitions do I need to know in order to understand the "CRO rules?".
ACTION: No Change DATE: 03/02/2017 1:02 PM 3745-352-05 What definitions do I need to know in order to understand the "CRO rules?". The following definitions apply to this chapter of the Administrative
More informationSHOULD BE CHANGED TO READ:
ERRATA NOTICE TO ALL RECEIVERS OF AND USERS OF: PORT OF LOS ANGELES TARIFF NO. 4 Item 1700 (b) DANGEROUS CARGO AND EXPLOSIVES ON VESSELS (b) It shall be unlawful for any person to handle, transport, load,
More informationAGENDA. Mike Wright. Director, Health, Safety & Environment Department United Steelworkers. Robert McAuliffe. Leo Gerard
Page 1 AGENDA 7:00-8:00 am REGISTRATION 7:30 am Early Morning Refreshments 8:30 11:00 am Morning Plenary (Spirit of Pittsburgh Ballroom Convention Center) Mike Wright Director, Health, Safety & Environment
More informationUniversity of Delaware.
HOT WORK PERMIT PROGRAM The following information describes the code required Hot Work Permit Program at the University of Delaware. PART 1 GENERAL University Contact: Department of Environmental Health
More informationClassification: Public Rev. 00 June 2018 Page 1 of 25
Classification: Public Rev. 00 June 2018 Page 1 of 25 Rev. 00 June 2018 Page 2 of 25 Rev. 00 June 2018 Page 3 of 25 Rev. 00 June 2018 Page 4 of 25 Rev. 00 June 2018 Page 5 of 25 Rev. 00 June 2018 Page
More informationCHAPTER 29: FIRE PREVENTION
CHAPTER 29: FIRE PREVENTION 29.1 Applicability This Chapter shall provide the basic method for administration and enforcement of the State Fire Prevention Code in the Town of Camillus and shall establish
More informationCHAPTER 9 FIRE PREVENTION** Article 1. Fire Prevention Code. Be it ordained by the City Council of the City of Wilburton as follows:
CHAPTER 9 FIRE PREVENTION** Article 1. Fire Prevention Code Sec. 9-1. Fire Prevention Code. An Ordinance establishing minimum regulations governing the safeguarding the life and property from fire and
More informationPocket Guide to Hot Work Loss Prevention. Sixth Edition
Pocket Guide to Hot Work Loss Prevention Sixth Edition Pocket Guide to Hot Work Loss Prevention Sixth Edition 4 Audience This pocket guide is intended for those involved with hot work management at client
More informationUsing the WPTW System: Frequently Asked Questions
Using the WPTW System: Frequently Asked Questions The Wellsite Permit to Work (WPTW) System is a robust and comprehensive approach to the planning and authorisation of work activities on onshore wellsites.
More informationDECLARATORY STATEMENT. THIS CAUSE came on for consideration upon the Petition for Declaratory Statement
ALEX SINK CHIEF FINANCIAL OFFICER STATE OF FLORIDA In The Matter Of: SPRING HILL FIRE RESCUE Case No.: 88055-07-FM Petition for Declaratory Statement / DECLARATORY STATEMENT THIS CAUSE came on for consideration
More informationColes Express Work Clearance: Induction for Contractors
Coles Express Work Clearance: Induction for Contractors Part of the Coles Online Contractor Induction system, for completion by contractors who will conduct works on Coles Express sites. Prerequisites
More informationVIRU KEEMIA GRUPP AS. Hot Works Safety Management Instruction No. 136
VKGj.TTO/39 VIRU KEEMIA GRUPP AS KINNITAN (allkirjastatud digitaalselt) Priit Rohumaa Juhatuse esimees veebruar 2013 (allkirjastatud digitaalselt) Meelis Eldermann Juhatuse liige veebruar 2013 Hot Works
More informationPROCEDURES FOR HOT WORK PERMITS, HOT WORK DISPENSATIONS & GAS FREE CERTIFICATES
PROCEDURES FOR HOT WORK PERMITS, HOT WORK DISPENSATIONS & GAS FREE CERTIFICATES Hot work permits, hot work dispensations and gas free certificates Version 9 - Aug 2015 Page 1 of 13 DOCUMENT CONTROL Document
More information